Connecting a kiosk to a server - help out a newbie!

well no exactly a newbie, but sort of
hey all
i am self-taught and i have pretty good as3 and mxml skills and have worked with Flash Pro and Flex, but only for my own stuff at home. i have only done local AIR stuff that don't require sending and getting data from a server
now someone has asked if i could build him a kiosks/server system, and i want to dive into that
the kiosks would be deployed in stores and have touchscreens displaying pictures, movies, banners and accept user control and data - no problem here
i plan to build his remote controlling software in Flex and the kiosk AIR apps in Flex or Flash pro.
the kiosks should periodically connect to the server to see if updates are available and download swf, jpeg and movie (mp4? flv?) files to the local filesystem (no live streaming is needed)
also, user created data (forms only) should be sent to the server - i guess xml
since i have no server side or server connection experience could you help me out here - what to investigate further into:
URLloader?
Sockets?
HTTPrequests?
WEBrequests?
RemoteObects?
can all this be in as3 alone or do i need stuff like php also?
also, would i be able in the controlling flex app to determine if specific kiosks are offline?
thanx a million,
Saar

you can use urlloader to load data from the server but you may also need serer-side code (unless you're hard-coding file names).

Similar Messages

Connection to the Ovi Maps server times out

Hi,
I've been having a lot of problems downloading individual country maps using the Ovi Suite. Occasionally it works, but 95% of the time, the download seems to start ("Preparing") but after a few minutes, I get the following error message:
"Connection timeout
The connection to the Ovi Maps server timed out.
Try again."
System: Windows 7, Nokia Ovi Suite 2.2.0.241. My internet connection is fine.
Phone: E52, Ovi Maps v. 3.03
Any advice will be appreciated.
Thanks,
mic

Hi Schorly,
You are right that when you try for maps update, the OVi Suite application connects to the maps server thru' you PC internet connection if you have already connected your PC to the internet.
There is no settings needs to be configured in OVi suite if you have your PC connected to internet already excluding the proxy user name and password entry (applies only if you need to authenticate yourself to the proxy server, leave it blank if not needed) under OViSuite -> Tools -> Options -> General
In the OVi Suite application login to your OVi account on the right hand side top of the window to make sure that your OVi suite application connects thru' your internet connection.
In case if you still have the issue of connecting to the maps server, you may have to re-try later as the server might get timed out due to overload
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

The connection to the Ovi Maps server timed out.

Hi,
Is there some general known issue presently with the maps server? Yesterday, I hardly got anything loaded because the connection was dropped every now and then. Today, I can not get any map downloading properly started. I'd really need to get maps of Italy installed soon.
I'm using the lastest Ovi Suite (downloaded and installed yesterday) and N95 8GB. I can get the country list to Ovi Suite application, but when starting the actual download, there is always just "Connection time out, The connection to the Ovi Maps server timed out, Try again".
So, is it just me or is there something somebody should fix on server side?
Br,
Markku

Same problem here with the latest versions of OVI. and am sick and tired of telling Nokia support the version number, phone type , firmware ,,,,,,. The problem appears to be at the map server being over loaded. Nokia support are un-willing to do a simple test of connecting to the server and see how slow it is. All they want is the model numer, soft ware version and most importantly if I am satisfied with the support and if I can complete their customer satisfaction survey!!!
Aplle - Google - ...be prepared for a lot of un-happy Nokia customers

ITunes cannot connect to ipod software update server - help?

I needed to restore my ipod (again) and downloaded the latest version of iTunes to do this. Unfortunately since the update I can no longer seem to connect to the update server / music store or Track Names function and am left with no way of restoring or updating my ipod. I've tried the following:
- Reseting the ipod over and over again
- Checked / unchecked the Automatic LAN settings Box
- Looked in the Drivers folder for the music store isp (it wasn't there)
- Added "Open DNS" addresses to my router - did nothing.
- Checked the Diagnostics function on the new iTunes which tells me everything is running fine except the unsuccessful attempts to connect to anything iTunes related!
- Tried installing a previous iTunes but I'm told my computer already has a previous version!
I love the way this website addresses the problem directly, but sadly if it doesn't work for you there's literally no-where to go! Does anybody know what I can do to solve this problem?
All the best.
ipod 30GB photo Windows XP Pro

Shut down any firewall you have running... Norton, Zone alarm, whatever you have, restart iTunes and try again. If that doesn't work take a look-see at this, http://docs.info.apple.com/article.html?artnum=302182

FCP 6 - help out a newbie please!

Hi - I've been teaching myself FCP (v6 as I was given it free) and have created a video project. Unfortunately I set my scratch disks to my boot drive. So, when I transferred the project onto an external drive it appeared blank - as obviously, the project only contained the shadow files. I've now reset my scratch disks to point towards the external drive, so future projects will be safe. But for this project, how can I accurately transfer the rushes and the cut vision onto my external drive to the correct scratch disks?
Additionally, Larry Jordan suggests creating a second drive on your desktop. I can't work out how to do this - and indeed why, when the video segs are to be stored on the external drive. Any insight?
Thanks greatly!

1. move your files to the external disk.
2. open FCP, open the project and when it tells you the media is "off line", point FCP (aka reconnect) to the new location
x.

Outgoing server times out - can't send any emails and don't know what to do

I receive emails just fine in my MobileMe account but when I try to send them they get stuck in outbox ****. It is an IMAP account and I have tried the connection doctor - which shows the server times out - as does the message box that pops up. I have a Genius Bar appointment for tomorrow but this is driving me crazy. Any insight would be much appreciated!

I had this occur several times before, some time ago & wish I wrote down the fix. I too am experiencing the same issue for the last 2 days; so my guess is it must not be my computer since nothing has been changed except I did a "sync" & that is the only thing different in the last few days.

Trying to restore iPhone 4s, and receive "Connection attempt to firmware update server was unsuccessful. The network connection timed out."

I've tried updating on both my desktop and laptop, neither work. I have the newest version of iTunes as well, so that can't be the problem. When I run diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion g7 Notebook PC
iTunes 11.3.1.2
QuickTime not available
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038BB880CE6FDE0
Current user is not an administrator.
The current local date and time is 2014-09-04 12:48:09.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
Plug-in Name: Last.fm AudioScrobbler
Plug-in Loaded: Yes
Plug-in Version: 4.0.5
Plug-in File Version: 6.0.5.4
Plug-in Path: C:\Program Files (x86)\iTunes\Plug-ins\itw_scrobbler.dll
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {CE989488-FC81-488B-A970-91D722749820}
Description: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Thu Sep 04 12:18:22 2014
Lease Expires: Fri Feb 25 02:18:22 2022
DNS Servers: 192.168.254.254
Adapter Name: {5E3757D2-481F-4D48-B535-A6A6ACF48517}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 17:00:00 1969
Lease Expires: Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-09-04 12:47:39

Hi christeag,
The only thing I can identify as an issue is that your Windows Firewall is running and iTunes is not enabled in it, so this may be the source of your issue. Here is an article for you that will help you rectify this situation:
How to enable iTunes in Windows Vista, Windows 7, and Windows 8 firewall
http://support.apple.com/kb/HT2553
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Connection attempt to firmware update server was unsuccessful. The network connection timed out

Hi. I have recently updated my iTunes to version 10.5.0.142 and cannot access the iTunes store after the upgrade. I have checked all the support articals and tried uninstalling and reinstalling iTunes, ensured that the firewall,internet explorer etc are correctly configured. Any help would be appreciated.
Below my diagnostics results:
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Microsoft Windows 7 x64 Business Edition (Build 7600)
Dell Inc. Latitude E6520
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0034AABC03B14CA8
Current user is an administrator.
The current local date and time is 2011-11-05 23:04:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 4200M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D16D8541-B70F-4DD7-A7C6-32B8EC55622C}
Description: Cell C
IP Address: 197.105.149.240
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers: 41.50.20.29
41.50.20.61
Adapter Name: {37C32779-B216-4D52-80FA-B4C3DF705DF3}
Description: DW1530 Wireless-N WLAN Half-Mini Card
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Adapter Name: {6ADC43CF-4031-4D31-9B46-2BF2867B8E09}
Description: Intel(R) 82579LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Active Connection: Cell C
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-05 22:37:41.

Finally found a solution:
For PC users, before reinstalling, try this:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run as Administrator
then type in:
netsh winsock reset
hit enter, restart PC, open iTunes. Hopefully fixed.

My sympatico mail acct won't send mail. It says connection to server timed out

I tried to make ure password was same for in box and out box but when I rendered password on outbox it said the connection to the sympatico server timed out?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

[deployComposite] SEVERE: Connection to the server timed out error

Hi All
I am trying to deploy Data Model (Size 5 MB) to SOA Server MDS repository and currently experiencing this issue:
deploy:
[input] skipping input as property serverURL has already been set.
[input] skipping input as property sarLocation has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=./tmp/mds/DataModel_mds.zip
[deployComposite] created temp dir =C:\Users\HomeUser\AppData\Local\Temp\deploy_client_02c963b3-9ac7-44e9-b613-27fdba9e5d28
[deployComposite] Adding shared data file - C:\Users\HomeUser\AppData\Local\Temp\deploy_client_02c963b3-9ac7-44e9-b613-27fdba9e5d28\DataModel_mds.jar
[deployComposite] INFO: Creating HTTP connection to host:192.168.0.3, port:8001
[deployComposite] SEVERE: Connection to the server timed out. Please check the server log for problems or increase the timeout value.
There is nothing in the soa_server1 logs. What timeout value i need to increase here. Please Help. Thanks!!!

Hi,
My action is not taking more than 3 minutes, but still I am getting a java script alert saying "a connection to the server has failed.". I can give you once example where I am getting this alert, when I go down to the adf table results , and click on any row, most of the times the error is showing up.
I would like to share a screenshot of it, but not sure how to upload a screenshot here.

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

Please help. Can no longer connect to my Mac Mini Server

Up until two days ago, my iMacs were connecting to my Mac Mini Server normally. All of a sudden I could no longer transfer files without being prompted to type my password. Enter password and nothing happened, then got an error message stating that I don't have permission to do that. Now, a day later, no acces to my server. Has anyone ever experienced this? Can anyone please help? I've read the Mac mini booklet but doesn't have any troubleshooting info. Thanks in advance.

Hello MrHoffman,
Thank you for the advice. I went into Terminal first and typed in your command and this is what resulted:
Last login: Fri Jan 24 22:39:08 on ttys000
serverX:~ serverx$ sudo changeip -checkhostname
Password:
Sorry, try again.
Password:
Sorry, try again.
Password:
Primary address     = 192.168.1.7
Current HostName    = serverX.private
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
serverX:~ serverx$
serverX:~ serverx$
I'm not very experienced with programming or coding, but this message seems to indicate that there's a problem with DNS just like you noted. I've highlighted the note in bold...What can you make of this or the logs from console below?
Below is what I found in Console:
1/24/14 8:55:08 AM          com.apple.launchd[1]          *** launchd[1] has started up. ***
1/24/14 8:55:19 AM          com.apple.launchd[1]          (com.apple.NotificationServer[73]) Suspicious setup: User "jabber" maps to user: _jabber
1/24/14 8:55:25 AM          edu.mit.Kerberos.kadmind[58]          kadmind: starting...
1/24/14 8:55:27 AM          org.jabber.jabberd[53]          ERROR: Could not create /var/run/jabberd: Permission denied
1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd[53]) Exited with exit code: 1
1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 1 seconds
1/24/14 8:55:28 AM          org.jabber.jabberd[130]          ERROR: Could not create /var/run/jabberd: Permission denied
1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd[130]) Exited with exit code: 1
1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 10 seconds
1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]          Registering Service Plotter Epson 7600._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=Plotter_Epson_7600 pdl=application/postscript ty=$null$
1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]           8:55:28.703 Got a reply for service Plotter Epson 7600._printer._tcp.local.: Name now registered and active
1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
1/24/14 8:55:30 AM          org.jabber.proxy65[52]            import os, md5, sys
1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
1/24/14 8:55:34 AM          com.apple.launchd.peruser.501[174]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/24/14 8:55:35 AM          ServerScanner[200]          Preference says we shouldn't scan
Thanks!

Please Help!!! 'iTunes cannot connect to iphone update software server'

I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
Not sure what to try next, have tried setting up new user to no avail.
I have followed the support guidance and I am not connected through proxy.
Diagnostics reported as follows:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Inc. Dell DV051
iTunes 9.2.1.5
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 098625257EFAC14A
Current user is an administrator.
The current local date and time is 2010-07-25 12:16:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Intel(R) 82915G/GV/910GL Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.77
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: No
DHCP Server: 255.255.255.255
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-07-25 10:25:45.
** Device Connectivity Tests **
iPodService 9.2.1.5 is currently running.

Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
1: Make sure your whole iTunes database is backed up.
2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
3: Re-install the correct version of iTunes fresh and try again.

Connecting a kiosk to a server - help out a newbie!

Similar Messages

Maybe you are looking for