Connecting BT Hub 3 to a Netgear universal WiFi Ra...
My netgear wifi extender seems connected to my BT Hub 3 but when my iPad tries to connect to the extender wifi it does not accept the wireless key from my BT Hub. Has anyone managed to get this to work ? Thanks.
Yes it will work. No crossover cable is needed as all switches are auto sensing anyway.
If you did not want to run a cable, then you could connect the hub to the switch using Powerline adapters.
See Network connections
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
HT4260 Can I use a Netgear Universal WN3000RP Wi-Fi Range Extender?
Can I use a Netgear Universal WN3000RP Wi-Fi Range Extender with my Airport Express to extend the range?
If so, is there anything that I need to do in order to configure my computer for it to work properly?
Are there any disadvanges to doing this (speed, signal strength)?
Thanks.You always want to stay with the same manufacturer if possible for your wireless needs to insure compatibility. If you have a recent version AirPort Express now, using another Express to "extend" the wireless signal will usually work well if there are not too many obstructions for the signal to overcome.
We cannot say if the Netgear device might work for you or not.....it was not compatible with Apple when we tried a sample a few months ago.....but with wireless, you never really know.
Let's just say that the product may not be as "universal" as the title might suggest. There are likely some footnotes in the Netgear materials that their product will not work with devices that use "proprietary" settings, as Apple does.
If you try the Netgear device, let us know how it works for you. -
Connecting IPad1 to Netgear WN3000RP WiFi Extender
I have a Netgear WN3000RP WiFi Range Extender. It works perfectly with my Iphone 4S, my Ipad2, Ipod and PC. When I want to connect my Ipad1, the Ipad finds the extender, says it is connected in the upper left corner and in the WiFi settings, but it won't actually connect. The 'search wheel' does not change into a 'checkmark' to indicate connection. In apps, the Ipad indicates it is not connected to the internet.
Any idea what could solve this problem? Thanks and regards.Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
How many pcs can connect to hub at same time
how many pcs can connect to hub at same time, I have looked everywhere and if you know where did u find the answer, many thanks
Most routers specs I've seen have a theoretical maximum of 256, but obviously due to practical performance issues would likely limited to less than 20.
As said, usually more than a home user would need.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. *** -
Macbook hangs when unlocking only when connected to university wifi. Any suggestions?
So, when I am connected to some university's wifi, It takes longer than a minute to unlock the screen. The process goes something like this when the laptop is connected to university wifi:
1) I click to bring up the password
2) I type in the correct password and press enter
3) I wait for ~75 seconds
4) The screen unlocks
When I am connected to home wifi, or a different institution's wifi, or no wifi
1) I click to bring up the password
2) I type in the correct password and press enter
3) I wait for less than a second
4) The screen unlocks
The fact that I always wait 75 seconds (I just tested it 3 times), leads me to think it might be a timeout for something, but I'm stumped as to what the lock screen could be doing with the wifi!
Any suggestions?This also happens for any check of my password (e.g. when I try to unlock system preferences). When it does, I am unable to use they keyboard for anything.
I also forgot to mention that my hard disk is encrypted with FileVault. -
"No secured connection defined (UX 0014)" error when exporting universe
I have set up 20 universes in BO XI 3.1 (on Win 2003), no problem. So far, so good.
But with 1 universe, i have a very bizar problem:
After import i get: "Universe connection is not accessible"
After export i get: "The connection associated with the universe has not been defined. You must create a secured connection. (UX0014).
But when i perform a test in the ODBC connection: OK
When i test the connenction in BO Designer: OK
So, i seem to have a secured conenction to that database. And a tnsping is successfull as well.....
What is going on here ?
Rgds,
JohanHi,
Its seems , you don't have access for that universe connection , that why your are getting the ""Universe connection is not accessible" error while you are import the universe.
Also you should have "secured connection " if you want export the universe .
So Please check the universe access rights for you and check the universe connection type also.
Thanks
Ponnarasu -
How to connect to excel sheet and create a universe on top of that
hi,
can any tell me how to connect to excel sheet and create a universe on top of that.what connection should i keep.Hi Vishal,
Here is how you can create a universe from an excel file:
Here are the steps to follow:
1. Launch Designer, select the Quick Design Wizard if not already open, and click "Begin".
2. Type in a universe name then click "New".
3. Select the Network layer "ODBC Drivers" and then click OK.
4. In the ODBC Drivers window, select the "Login" tab and then type in a name for this connection.
5. Select "Generic ODBC data source" from the drop-down list for database engine.
6. Click the "ODBC Admin" button to define data source name.
7. In the ODBC Data Source Administrator window, click Add.
8. Select "Microsoft Excel Drivers" and click Finish.
9. Enter a data source name.
10. Click "Workbook", select the file you want to access, and click OK.
11. Locate and select the data source name from the drop-down list.
12. Click "Test" to make sure that the server is responding.
You will be back at the Quick Design Wizard "Step 1 of 4". Click the "Next" button and follow through the rest of the steps in order to complete the universe.
-Shreyash -
Connecting USB Hub doesn't connect some devices (randomly)
I have quite a few USB devices (normally 5: external Apple Modem, mouse, ext. Apple keyboard, 2 printers), which I plug into a USB 2 hub (externally powered D-Link DUB-H7). When I bring my MBP back to my desk, I plug the hub into one of the ports on my MBP.
In theory, this should connect all of my devices. In practice, it connects only some of them, and which ones it connects seems to be completely random. Sometimes just two, sometimes all of them. Sometimes the keyboard and not the mouse, sometimes vice-versa, and sometimes neither (both plug directly into the hub - I'm not using the keyboard hub).
If I unplug and re-plug the main cable - I get another set of devices. If I unplug the cable to an unrecognized device and re-plug, it is then recognized.
As you might imagine, this is a PITA.
I have tried:
- running USB Prober, including logging. This confirms that the non-working devices aren't recognized by the system at all, until I re-plug. The logging doesn't tell me anything that I can make use of.
- installed the debugging USB kext (http://developer.apple.com/hardwaredrivers/download/usbdebug.html). This makes the USB Prober log give more information, but still doesn't tell me anything that helps. If this causes writing to some other log, I can't find it.
- replaced the hub with an identical, brand new hub. No difference.
- replaced the main USB cable with another USB 2 certified cable. No difference.
Looked at the console and system logs. There are some USB-related errors, but nothing unusual happens at the point of connecting the hub. There are msgs from USB Prober, but I get these even when (successfully) unplugging and re-plugging a single device. E.g.
2007-09-20 22:54:41.651 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:41.652 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:50.975 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:50.975 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.412 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.412 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.934 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.934 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.467 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.467 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.954 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.954 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:53.254 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:53.254 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
So, any ideas on what this problem is, or how to track it down? The behavior is as if there are two many device-connection events happening in too short a time, and some of them are getting dropped. If so, could be an OS problem. But, that seems pretty basic.
I'd be glad to provide more detailed logs, if someone can specify what to log.Hi all (esp. Carolyn). I bought a new hub (BelkinUSB 2.0 7-Port Economy Hub http://www.buy.com/prod/belkin-usb-2-0-7-port-economy-hub/q/loc/101/202378584.ht ml ), and my problems are gone.
I did more searching (I had done a lot already), and found a single comment on newegg by someone having similar and worse problems - same D-Link hub, and also on a Mac, though the 2 other Mac users had no complaints.
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16817111402&SortField= 0&SummaryType=0&Pagesize=100&SelectedRating=-1&=0&=100&Page=
Some other users of this hub had problems also, on PC's as well, though most had none.
Unfortunately, now I'm stuck w/2 junk hubs (warranty has expired). At least my problems are gone!
Message was edited by: ruftytufty -
Can i connect USB hub to airport express
can i connect USB hub to my airport express & sharing 2 or more printer with one airport express ?!!
It works for me, but I cannot predict if it will for you.
Be sure to try a powered USB that has its own power supply. -
Connection through Hub but not extender
Hi - I have a BT Dual Band Wifi Extender 600 which originally I set up at home using the WPS button on my Home Hub 5 and it worked fine. I took it on holiday (where I knew wifi was poor) pressed the reset button, connected to the property's wifi via my iPad browser, and again it worked fine. Came back home, reset again, but found this time it would not connect to the Hub via WPS so used the browser (via iPad), and the Extender seemed to have made a good connection to the Hub with the green signal light showing. However now my iPad will not connect to the internet (despite showing a strong wifi connection) as long as the Extender is the stronger signal. If I take it in next to the Hub everything is fine. Any ideas?
Solved!
Go to Solution.Hi ydnA,
Welcome to the forum and thanks for posting, I'm sorry to see you're having issues with your BT Dual Band Wifi Extender 600. I'm afraid I don't know why this is happening but I would recommend you contact the Wifi Extender 600 product support desk via this link and they will be able to offer you assistance.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I just received the IMG 1.6 update yesterday. While streaming DVR to my HD box, I reveive an error "Lost connection to Hub..." the program will then start from the beginning. Anyone else have this problem?
I was having this issue so i called in. The representative I spoke to was extremely Knowledgable. He did some research, which took about 20min, and found the answer. Apparently this is a known issue that has occured with the new IMG update. He said that the IMG developers know about the problem but do not have a target date for a fix yet.
TheSanchez
Verizon Telecom
Verizon Content Management Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
How do I connect my iPhone 5 to my Netgear WGR614v9
How do I connect my iPhone 5 to my Netgear WGR614v9
http://support.apple.com/kb/TS1398
enter the password to connect to the wifi. -
Unable to load login page for university wifi
I am in France, using the university wifi system (de la CROUS). I have a macbook from 2008 running Leopard 10.5 that connects perfectly (Safari), loads the login page and let's me surf normally. I now have a new macbook pro (2011) running Lion. It also connects to the wifi without a problem (Safari), but the login page will not load. I've checked all the settings I can find and verified that they're the same as my macbook. I've cleared the Safari cache and tried enabling/disabling pop-ups. The graphic for the login page loaded once, but then timed out. I have been trying for almost a week. I have went to see the people in charge of the connection, but no one there seems to know anything about macs (it's France, after all). Any thoughts? Any and all help with appreciated!
I know for sure that both are up to date.
Update: I downloaded firefox by tethering my phone and i AM able to access and login to the system using firefox. the problem then lies with safari. i tried google chrome and has the same problem. has anyone else encountered this issue with safari? -
My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I'm unable to install updates my iPad.
What model iPad and what version of iOS is it currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Planning File Entry Not Created For MRP Run
We are running MRP in backgroung at MRP area level as per scheduled. One material is missing from MRP run. We are expecting that we should get the proposals because stock is zero ( below reorder level) on the date of sheduled MRP run. Earlier it is w
-
Hello, I have been working with long sequences in adobe premiere pro cc 2014. All of sudden, I see white flicker in the program monitor and rendered output too. The flicker does not follow any pattern. It is very random. How to work around on this? R
-
Hello. I am setting up a test lab where the users will connect to a ASA 8.3 with SSL VPN Anyconnect. I have tested to se that the user can login with with name/password that is in the local database in the ASA, but we need to use one time passowords
-
How to initiate copy/paste from menu in projector?
I have a projector that uses a MenuMember to create a standard menu across the top i.e.: FILE EDIT HELP I have several text, (not field), but text members that are editable where the user inputs text information. Pretty basic and simple. If they use
-
Correct multiple calendar entries after installation of OS upgrade?
After I loaded iOS 5, my calendar on my MAC had duplicate entries. Can anyone help?