Connecting ERPi with ODI Interface

Hi Gurus,
Till now I was able to connect to Oracle EBS but, now my query is whether I can connect to ODI Interface through ERPi instead of connecting directly to EBS.
If its possible how can I achieve this please let me know I am eager to learn this.
Thanks

If you are just wanting FDM to pull the source data from a table in a SQL Server database, you would need to write a SQL integration Script in FDM To pull data from the database table. The FDM Administrator Guide has a simple example of this.

Similar Messages

Basic Issue with ODI interface

Hi All,
I have a very strange problem.
I am coding my second interface in ODI.
Its very simple
Joining 4 tables ,with one filter and connect it with the target table.
The interface when executed runs fine,without any error.
But the target table doesn't get populated.
So when i check the ODI interface at every step via the Operator navigator,I get no error at any step.
step1) drop a table (this comes as a warning as no table exists)
step2) create a view(this step suceeds ,but when i check the database the view is not created)
STEP 2 is a real issue and I can't understand as to why this view is not
getting created in database,when the step completes successfully
Pls can someone suggest where should i look for ?
rgds
s

I can relate to your issue.
ODI does this to me all the time.
The Operator logs show all greens and show no error, but no data makes its way to the Target.
I usually remove one mapping at a time and re-run the Interface. That helps me pin-point what might be the issue. Very frustrating.

Sql Server Connectivity issue with ODI Data Profiler

Hi all,
To profile data from SQL Server Data source, i had created a ODBC connection(using Windows NT authentication) in the system and it was successful. Created a connection with Type ODBC connection in Loader Connections along with System name, Port No and DSN Name. But while trying to connect the database it is throwing an error as Authentication Failed. Please guide me.

ODI's DP does not support the use of sourcing data on the ODBC data source. You must extract to a file, and use the file as the input.

Synchronize RDBMS source view with ODI Interface

Hello ODI expert(s),
I'm new to ODI & hence experimenting.
I'm trying to load metadata from a SQL Server view to Oracle's Hyperion Planning.
My question is w.r.t source.
I've 6 columns in my source view. All 6 were mapped to the appropriate target fields. Suppose a column is removed from Source view. Is there any option in ODI to synchronize i.e. exclude the (now)unwanted column(& hence mapping) from the ODI Interface, I initially created?
Awaiting one of your responses.
- Natesh

I can relate to your issue.
ODI does this to me all the time.
The Operator logs show all greens and show no error, but no data makes its way to the Target.
I usually remove one mapping at a time and re-run the Interface. That helps me pin-point what might be the issue. Very frustrating.

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

BMW 335i ipod interface connection problem with ipod classic 80GB

Hi all, i have a 2007 BMW 335i with dealer installed ipod interface, and i been using it since, it's simply i just connect ipod with the cable in the glove compartment and leave it there, and it charges and stanby, when i start up the car the audio jumps right to where i left off on the ipod and it also let me control it with iDrive. after about one and half year of usage, i think there is something wrong with my ipod or i dont know for sure, well here is the problem, when i start the car it will play music from the ipod and i can control it from iDrive and everything but after about 5-10 mins, the music stop, and my iDrive shows weird playlist, and i need to unplug the ipod and replug again to have it connect and then it will stop by itself, after 5-10 mins, any of you guys have a bmw with the ipod interface have this problem?? i dont really know if it's my ipod problem or my bmw ipod interface problem. anyone can help me with this? thank you!

That is most likely going to be a problem with your iPod, not the interface.
Have you tried Resetting the iPod? (hold down the menu and center buttons for six seconds).
If that fails to work, try Restoring the iPod in iTunes.

Physical interface Default Gateway connecting VPN with AnyConnect

When I connect vpn with AnyConnect, I can't see default gateway on Physical Interface.
before connect vpn
==========================================
C:\WINDOWS\system32>ipconfig
Windows IP Configuration
Ethernet adapter Local Area
        Connection-specific DNS Suffix . :
        IP Address. . . . . . . . . . . . : 10.1.1.100
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 10.1.1.10
after connect vpn with anyconnect
==========================================
C:\WINDOWS\system32>
C:\WINDOWS\system32>ipconfig
Windows IP Configuration
Ethernet adapter Local Area
        Connection-specific DNS Suffix . :
        IP Address. . . . . . . . . . . . : 10.1.1.100
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . :'Can't see default gateway'
Is this the specification of Anyconnect?

Nyanko,
This will happen when you are using tunnel all as the split tunneling policy, the computer will encrypt all the traffic so the default gateway will be removed from the physical connection and placed into the virtual adapter. If you take a look at the routing table you will see that what really happens is that the original default route's metric will be changed so that it is higher than the one injected by the virtual adapter, once you disconnect it should go back to normal.
Further information on split tunneling:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml
HTH
Jonnathan

ODI Interface Icon with I or U

Can anyone please explain what is the difference between ODI interface icons with an I or U ?

It's part of ODI's internal version control. 'I' means than the object has been inserted and 'U' means that the object has been updated since the last version.

How can we find the hostname of the devices connected with the interfaces of switch?

how can we find the hostname of the devices connected with the interfaces of switch ? I have tried mac address and ARP, there are lot of servers connected with the switch having multiples LAN cards. So mac table shows the mac of physical machine as well as virtual machines. But i want to know only the physical machines. Is there any other method to find out the IP address, hostname of the physical machines only?

Hello Leo Laohoo
Thanks for this information
In our network most of the Servers are not of Cisco. Some of them are Vmware machines, some are Hyper V machines, etc.
Does IP device tracking show us only the IP addresses of the Physical Machines of the Vmware Server not of Virtual Machines?
Regards
Mukesh Kumar
Network Engineer
Spooster IT Services

Voice Chat dosnt connect in Lion with Arabic Interface...

While I am using Lion with Arabic interface, when I use voice chat in yahoo messenger v3.0 for Mac, the voice server never connects and the audio dosnt work... what is the solution for just a problem? I think Apple should correct the bugs with arabic interface as well.

Tell Apple
http://www.apple.com/feedback/macosx.html

Connect ipod to HK soundsticks I with usb interface

Does anyone know how to connect an ipod 30 Gb to HK soundsticks I with usb interface?

No way without a computer in the middle. You will need the Soundsticks II with minijack interface.

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

Cannot buil Essbase Dimension With ODI

Hi all,
i've a problem with an ODI interface to load Metada into Essbase.
I must load the account dimension the table contains 4 information:
Parent
Child
Alias
Data Storage.
I need to load some elements as Dynamic Calc and so I've added the column Data Storage wich contains 'X' For Dynamic Calc elements and 'S' for the other bottom level elements that are Store, but these buttom level elements must be shared member in the same dimension under another hierachy.
The error that i've received from interface after the execution is:
unknown source (error -1) cannot build dimension.
Can somenone help me on this?
Thanks
Best Regards
E. G.

Hi John,
i have once more the same problem.
I send you the script description of the interface:
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_PARENTNAME "ParentName",C2_MEMBERNAME "MemberName",C3_ALIAS "Alias",C4_DATASTORAGE "DataStorage" from "C$_0Measures" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
Is it helpful for you?
Next week i'll send you my source and the outline file.
Today i've some VPN conncection problem and so i can not send you all the information.
Thank you very much for your help.
Regards
E. G.

ERPi FDQM/ODI/DIM

Hi Planning Gurus,
I need to understand, is ERPi seperate comonent or it comes with FDQM/ODI/DIM?
Does it also work with ODI/DIM?
Regards
Kumar

You should have a look at the docs
Oracle Hyperion Financial Data Quality Management ERP Integration Adapter for Oracle Applications is a module of Oracle Hyperion Financial Data Quality Management, Fusion Edition that enables you to perform the following tasks:
Integrate metadata and data from an Enterprise Resource Planning (ERP) source system into an Enterprise Performance Management (EPM) target application
Drill through from the EPM target application and view data in the ERP source system
Write-back budget data to the source system from any Oracle Hyperion Planning, Fusion Edition, Oracle Essbase ASO, or Essbase BSO application.
The Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition installs ERP Integrator. However, ERP Integrator relies on Oracle Data Integrator 10.1.3.6 as the engine that extracts data and metadata from the defined sources and then either populates the Performance Management Architect interface tables or populates the Classic applications with the extracted artifacts. Oracle Data Integrator must be installed and configured before ERP Integrator can be used.
Cheers
John
http://john-goodwin.blogspot.com/

ASA 5505 configured for WebVPN connecting to Citrix Web Interface

ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.

Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay

Connecting ERPi with ODI Interface

Similar Messages

Maybe you are looking for