Connecting lines missing from binary TOC

Hello!
Hope you can help me...I'm using X5.
My problem is that I lose the connecting lines between the
square/minus boxes in the TOC when I select binary.
Is there a way to have both?
Thanks much, Deb

Welcome to our community, Deb
It is my understanding that if you enable the Binary TOC,
none of the styling attributes will have any effect.
Unless Pete Lees steps in here to set us straight and advise
I'm wrong in my assumption, I'm going to say we just can't have our
cake and Edith too.
Seems lots of things in life are a trade off, eh? Want
something over here? You have to give up something over there.
Cheers... Rick

Similar Messages

  • JTree display: vertical connecting lines missing

    My JTree uses a subclass of TreeModel to display the contents of a DOM tree and to allow modifications on this tree. I've got a problem with the rendering of the tree: the vertical connecting lines don't show.. (also there seems to be problems with the refreshing of the tree display, even though TreeModelEvents are fired properly, but it might not be related.)
    The problem originates from the TreeModel subclass (other models worked fine), but I can't tell what exactly in the class causes it. I've tried to remove code, etc.. with no effect.
    Has anyone encountered something similar?
    Thanks in advance.
    Simon

    yeah... that's common in jtrees that do not refresh well... you know that something is wrong when the lines have dissappeared.
    when i encountered this problem what i did was to copy the lines from DefaultTreeModel sourcecode where the model is refreshed into my code... that worked fine for me...

  • OBIEE Line Missing from Line View

    Hi:
    OBIEE 11.1.1.6
    When creating a line view from two rows of data points, OBIEE will not draw lines between data points when the data points are unbalanced. Here is an example. Let's say product 1 has sales for Jan, Feb, March, April, May and June. And product 2 has sales for only Jan, March, and May. When I create a line view, OBIEE will plot the data points for product 1 and draw a line connecting the data points. But for product 2, OBIEE will show the data points but will not draw a line connecting the data points.
    Has anyone seen this before? Any solutions?
    Thanks.

    Hi Steve,
    Please run get-oabvirtualdirectory |fl to ensure the URL (Internal URL and External URL) for OAB has been configured. If the URL is not configured, you can use Set-OABVirtualDirectory command to set the URL for them
    Set-OABVirtualDirectory
    http://technet.microsoft.com/en-us/library/bb124707.aspx
    After that, please restart the computer which has Outlook client installed and test the issue again.
    Mike

  • Lines Missing from .eps file

    I genereate the inital image in AutoCAD, export it as an .eps file then format the image using Illustrator CS5. The files are then placed into an ExCel spreadsheet where the lines will not show up.
    When using Illustrator I change the stroke of all lines then drag the artboard edges closer to the object leaving a space around the object. After formatting the very most bottom line of my thumbnails will be missing. I've tried placing the objects at a different reference points in AutoCAD before exporting the file but this has not helped. When running CS3 I never had this problem.
    I'm a novice at using Illustrator so any thoughts or suggestions will be greatly appreciated.

    Why bother with EPS for an Excel chart? Export it sufficiently high-res from AI as a PNG and be done with it.
    Mylenium

  • Airport/connection bar missing from top of screen

    apologies if this is being posted in the wrong area.
    I have noticed that the icon showing my internet connection from the top right hand side of the screen is missing, any idea how i get this back?
    Thanks.

    Hi
    Goto sys prefs/network/airport/airport tab and tick "show airport status in menu bar".
    Tony

  • SQL Developer Tables Node is missing from when expand connection

    Hi,
    I'm getting this issue often when I expand the connection node (Oracle DB connection), the Tables node is missing from the object types tree. Even if i close the SQL developer and come back it would be the same.
    Is this a known issue? I've seen this both in 3.0 & 3.1.
    please advice.

    Hi,
    Just as an update: I did not encounter the issue anymore since my last post (ca 1 week) and I did not do any changes to sqldeveloper any more (never did an export / import of connections, no change in version of JDK any more etc.).
    I guessed this here could be my issue: SQL Developer: Not able to view tables
    excerpt: "The problem occurs when SQL Developer 3.0.04 connects to a limited privilege schema via a shared server connection. The workaround is to connect using a dedicated server connection."
    I use type "Basic" for all my sqldeveloper connections, so no TNSnames.ora entries containing the line "SERVER=DEDICATED" and I did get same issue also when connection using a custom created user having the DBA role.
    Therefore I guess this is here is more likely to be my issue: SQL Developer: Not able to view tables
    excerpt "JDBC driver having to do with 'Out Of Band Breaks' - basically a low level TCP issue.
    To enable the workaround, a Java system property needs to be set - oracle.net.disableOob=true. "
    Very often when I did have the issue I closed SQLDeveloper and used Toad for the rest of the day (or a few hours). Next time launching SQLDeveloper the tables node usually was back again. So this could fit into the picture, right?

  • Line item missing from FBL3N report

    Line item is missing from FBL3N report. I am selecting correct parameters for FBL3N report.
    The correct balance is shown in the FS10N report.
    I have checked the document, it is not reversed.
    Can anyone please tell me the reason for the same?

    HI ,
    If its related to 2009 and are you sure that you have selected fiscal year or date in which that document falls .
    Can you Do one thing Please go to Dynamic selection of FBL3N and put that document number in Document number field and then find out whether that documents  come or not .
    if it does then please look at posting date and GL accounts etc for that  and check the header data as well.
    May document is related to different company code .
    One more thing Please check when you run FS10N display line item can you see document there if you can then definatley you will be able to see .
    Please attached the screen shot of document with header data .
    Many Thanks
    Regards.

  • Few of my amount_cr lines are missing from the query, check GL_JE_LINES_V.

    I have a discover report which have 5 union all, and one of the select statement brings the information about the cr.type like 'MISC'from the table called ar.ar_cash_receipts_all cr.
    This query basically brings the information of amount_dr and amount_Cr from the general ledger table, the navigation for the same is as below.
    Navigation:
    Enter journals
    pick some Batch Name
    Click find button
    Place cursor on the line item from the list that has Journal Name like Miscellaneous receipts
    Click on Review Journal.
    When you check the record history pulls the information as GL_JE_LINES_V.
    I am not able to pick few of my amount_cr values.
    Tables and joints used for my query is as below.
    Please correct me if i am missing any information.
    Thanks in advance.
    Archice
    APPS.ra_customer_trx_all ct
    ,AR.ra_cust_trx_types_all ctt
    ,AR.ar_distributions_all ard
    ,apps.hz_cust_accounts_all cust
    ,AR.hz_parties cust2
    ,AR.ar_adjustments_all adj
    ,GL.gl_sets_of_books books
    where
    adj.set_of_books_id=books.set_of_books_id) and
    nvl(adj.postable,'Y')='Y') and
    adj.adjustment_id=ard.source_id) and
    ard.source_table='ADJ') and
    adj.customer_trx_id=ct.customer_trx_id)
    and ctt.cust_trx_type_id=ct.cust_trx_type_id) and
    cust.cust_account_id=decode(ctt.type,'BR',ct.drawee_id,ct.bill_to_customer_id)) and
    cust2.party_id=cust.party_id and
    ctt.set_of_books_id=books.set_of_books_id(+)

    Hi Blushadow,
    Thanks for responding my query, here is best i can mention further regarding my query problem.
    The code which I have posted earlier, has been coded by some other technical person, I have posted part of the main query which pulls ‘MISC’, the posted query is not pulling all the amount_credit (amount_cr) column information, few of the lines are missing,
    The amount_dr, amount_cr is basically called form GL_JE_LINES_V, I have checked this from record history, I want to know whether, I need any further tables to be added for the existing query, in order to pull the missing amount_cr
    Lines.
    Basically, when we check the description of the view GL_JE_LINES_V
    We have few tables.
    GL_JE_LINES JEL
    , GL_CODE_COMBINATIONS CC
    , GL_JE_LINES_RECON REC
    , GL_SYSTEM_USAGES USE
    I would like to know is there any way to use another table instead of
    GL_JE_LINES_RECON REC, because when I query it, I wont see any data from this table and this have two major joins in the mentioned view called GL_JE_LINES_V.
    Regards
    Archie

  • Withholding tax information missing from line item

    Hi Gurus,
    We have created a vendor invoice in SAP. The voucher processed and paid has withholding tax of 1,333.00
    But if you display the vendor invoice and click on the withholding tax data button, it says that withholding tax information missing from line item.
    Kindly advise how could this happen when the vendor account has maintains withholding tax code and the payment document also has withholding tax information.
    Thanks,
    Ellicec

    Dear,
    Please check the following:
    1. The withholding tax types and indicators must be defined as Liable'.
    Please check this via vender master data (fk02).
    2.Please check field status group for withholding tax fields in
    transactions OB14 (inserting the field status variant of the Company Code oby6 and the field status group of the g/l account that You can find running FS00) and OB41 (posting key, in DP case 29). Check the account group for the GL account
    assigned to the vendor reconciliation account in FBKP.
    These should be set as "optional".
    Select group --> Taxes
    Suppress Req. Entry Optional Entry
    Withholding Tax Code X
    Withholding Tax Amounts X
    regards

  • Heading 1 level missing from TOC?

    I have this little RH 7 sample project.
    When converting to PDF using 'Printed Documentation Wizard',
    the primary Heading 1 level is NOT included in the MS Word/PDF
    'Table of Contents'.
    I'm not using any MS Word templates, just the project's CSS
    styles.
    Arcrobat PDFMaker settings in MS Word are set to default and
    include Heading 1-9.
    I've searched and searched but I don't know how to include
    this Heading 1 level in the TOC.
    When checking the MS Word 2003 document through Insert
    >> Reference >> Index and Tables, the Heading 1 level
    is missing from the tab 'Table of Contents'.
    When adding the Heading 1 level there through 'Options'
    button, the TOC updates correctly, but I don't know how to include
    this Heading 1 level through RH.
    Sample project
    here
    A note on the sample project:
    You'll see that every topic title associated with TOC book is
    excluded from PDF through conditional build tags.
    This was done so prevent titles from being printed twice in
    PDF.
    For example, in the TOC there's an item titled 'Balance
    sheet', the associated topic Balance_sheet.htm has exactly the same
    title 'Balance sheet'.
    To prevent this title from being printed twice in PDF, the
    topic title was excluded through conditional build tag.
    Any help would be appreciated.
    Best regards,
    Herman

    > > Are you sure the print layout is 100% the same on
    both PCs, particularly the Build Expression?
    > I'll check again this evening when I have access to the
    other PC.
    I took a copy of the project on the rogue machine, copied it
    to the second machine, ran the printed documentation wizard and
    checked the settings. The result is as expected. I get the TOC with
    the correct headings, the second one in my PDF.
    In the meantime I've also compiled the printed documentation
    on a third PC (with XP + PDF plugin that comes with RoboHelp). The
    result is the wrong TOC, the first one in my PDF.
    > Try generating on the rogue machine to just Word, not
    the PDF. When the document opens in Word instead of reinserting the
    TOC, right click to the right of the TOC and select Update Field.
    Does that correct it?
    I'll try that tomorrow when I have access to that PC.
    Very weird.
    Thanks again Peter.
    Herman

  • Created PDF from MS Access - lines are missing from PDF

    I'm using Acrobat 8 (from Adobe CS3) to create PDF files.  When I "print" reports from Microsoft Access 2003, the thin line borders that outline cells are often missing from the PDF. Typically, 1 or 2 of the sides are missing, with the other sides appearing normally.
    This appears to happen primarily when the line thickness is set to "hairline".
    If I use a non-Adobe PDF writer (PDF Creator), then the lines appear normally.
    Any suggestions about what I can do to correct this?
    Thanks - Jim

    These are the settings.

  • I can not lissen music if I connect a ipod from line-in on my Satelite P200

    I can not lissen music if I connect a ipod from line in on my Satellite P200. I can only register misuc from line in. Why?
    Thank you in advance
    lillo

    >I can not lissen music if I connect a ipod from line-in on my Satelite P200
    I am not ipod owner but im really wondering you cannot do this. As far as i know you should have USB cable that allw you to connect iod ti your notebook using this USB port on your notebook.
    iPod should be recognized and listed in windows explorer so you should have access to all saved data there.
    If this works open all mp3 files saved on iPod using Windows Media player or some other player like Winampo and enjoy your music.
    Does it works or not?

  • I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

  • Connection Pool Name Missing from Drop Down when Creating a New Datasource

    Hi All,
    I'm running Weblogic Server 8.1. I've successfully created a connection pool for DB2 using the Non-XA JDBC driver from IBM (Version 7.1). When I attempt to create a datasource for this pool and un-check the "Honor Global Transactions" checkbox, the connection pool is missing from the dropdown on the next page of the wizard. If I check the checkbox, the connection pool appears in the list.
    I experience this behavior on one instance of Weblogic Server, but not on another (I can see the pool whether or not the check box is checked).
    Is there some setting on the connection pool that could cause this behavior?
    Any help would be appreciated.
    Thanks,
    Steve

    Steven Grant wrote:
    Hi All,
    I'm running Weblogic Server 8.1. I've successfully created a connection pool for DB2 using the Non-XA JDBC driver from IBM (Version 7.1). When I attempt to create a datasource for this pool and un-check the "Honor Global Transactions" checkbox, the connection pool is missing from the dropdown on the next page of the wizard. If I check the checkbox, the connection pool appears in the list.
    I experience this behavior on one instance of Weblogic Server, but not on another (I can see the pool whether or not the check box is checked).
    Is there some setting on the connection pool that could cause this behavior?
    Any help would be appreciated.
    Thanks,
    SteveI can't reproduce this on 8.1sp5...
    I would have you compare the JDBCConnectionPool entry
    between the two instances.

  • Time line and canvas missing from screen!

    Time line and canvas missing from screen!
    Help!
    Can not retreave them from Final Cut G.U.I
    G5   Mac OS X (10.4.9)  

    In the Browser, double click (aka open) ANY sequence. The timeline and canvas will reappear.
    If need be, create a new sequence.
    x

Maybe you are looking for