Connecting my HP photosmart c6350 all in one printe2r to my IPAD Air

Please help me set up my iPad Air to my printer.

I don't believe that printer supports AirPrint, but you still may be able to use google cloud print to print from your iPad. Follow the instructions here for setting up google cloud print:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=76300&tmp_task=useCategory&cc=us&dlc...
I work for HP.

Similar Messages

Is there a way to upgrade my Photosmart 2710 all-in-one to e-print or air print from my iPad 2?

I just purchased an iPad 2 running iOS 5.2 and want to find a way to print to my Photosmart 2710. Any Chance? I guess I could transfer documents to my PC via iTunes and then print, but its an obvious hassle.

Hi Alex, in theory if you could find a used card, there were2 other options, not sure the 2nd one would work in the 20"...
ATI Radeon HD 2600 PRO graphics processor with 256 MB of GDDR3 video memory. A NVIDIA GeForce 8800 GS graphics processor with 512 MB of GDDR3 video memory.

HP Photosmart c7280 All-in-One Mac 10.7.1 (Lion) the "Two-Sided" option is grayed and cannot use?

I have a HP Photosmart c7280 All-in-One printer and a Macbook Air that runs the Lion operating system (10.7.1).
I am trying and needing to print via the "Two-sided" option that appears under the "Layout" pull down tab option, however, the "Two-Sided" option appears to be greyed out as if you are not allowed to use it. I am sure that that is not the case I just do not know how to unlock it yet I guess?
I just made sure that all of my software was up to date and it is currently.
Everything else is perfect about the printer and I have been using it for years, so thank you! I would just like to know what on earth I am doing wrong or need to do to unlock that "Two-sided" setting, so I do not waste a ton of paper! Thanks again!
Sincerely,
DAP413
This question was solved.
View Solution.

Hi DAP413,
In order to actiate the Two-Sided duplex accessory, you have to enable it from the printer settings:
-Enter System Preferences > Print & Scan
-Double click the Photosmart printer name to open the Print Queue.
-Click the Printer Setup button
-Click the Driver tab and make sure the Two-Sided Printing Accessory option is checked.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hi Tomiwa,
You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

Problem connecting to router HP Photosmart e-All-in-One

Trying to install new HP Photosmart e-All-in-One. Printer will not connect to Router. I select wireless network, feed in password. Screen then says printer error and asks to be turned off. Code B8126AD6 flashes up for a short period. When feed in incorrect password will tell me incorrect, however, if correct password inputted always has a problem

I had a similar issue with my Officejet 7410 All In One Wireless and my new Linksys Router with WPA security.
Going through the Network Setup from the printer control panel finds the signal, allows me to enter the security code, accepts the code like all is well but upon pushing the enter button it goes back to the menu selection screen.
No message that it didn't connect, or that it was successful.
Changed the router's security settings to "Open" and the printer is now connected to the network.
Windows 7 and downloaded the full feature software.
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
System Model HP G60 Notebook PC
System Type x64-based PC
Processor Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, 2200 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.63, 3/8/2010
Hardware Abstraction Layer Version = "6.1.7600.16385"

Can't connect Photosmart 7510e all-in-one C311a to network for updates-new install-Windows 7 32 bit

During installation of new printer and wireless e-print set up (Photosmart 7510e all-in-one C311a) I was asked to use printer to check for updates but I am getting error "printer is not connected to a network". I have printer connected to laptop via USB. Laptop have active wireless connection, Windows 7 Pro 32 bit. Please advice.

Hi mjf11,
Sorry you are having trouble. Here is a link to the HP Network Diagnostic Utility, which should help you resolve your network connectivity issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&lang=en&lc=en&product=507...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Photosmart 6180 All-in-One Wireless Connection After Windows 7 Laptop Added to Network

I replaced a broken Vista laptop with a new Windows 7 64-bit laptop. After I installed my Photosmart 6180 All-in-One, the printer stopped working correctly when we try to connect to it wirelessly.
I followed all the directions HP provides for updating the printer software and drivers for Windows 7.
We've tried all the suggestions for resetting the printer that we can find on the HP forums.
The printer works properly when connected via USB cable to a Vista laptop.
I was not able to get the printer to work via USB cable connected to the Windows 7 laptop.
When we try to connect via the wireless signal, regardless of Vista or Windows 7, the printer goes into an endless initialization loop.
We need to determine whether achieving a wireless connection is hopeless. If it is not, we need step-by-step instructions on how to resolve the issue.
The security system for the printer is WEP. We connect through a wireless router provided by Verizon FIOS.
Many thanks in advance for your help.

Some of HP's printers do not support WEP shared. If you are using WEP shared this could be the problem. I would suggest turning off the WEP security temporarily to see if that fixes the issue. If it does then you can look at changing the security to WEP Open system authentication.
Mike
Say "Thanks" by clicking the Kudos Star in the post that helped you.
I am an HP employee.

Photosmart Premium All in One Blue screen error B882B1C4

I have recently purchased a Photosmart Premium All in One C309G machine which is connected via a USB cable to the PC. When I try to use it wirelessly it produces a blue screen with an error message B882B1C4 as soon as I switch on the BT hub. HP haven't been able to sort out the problem as I am now in receipt of the 4th replacement . Can anyone suggest a solution please? I have a BT1800HG wireless hub connected with an ethernet cable to my HP PC.

This is posted in your separate thread:
Hey there. I would try a power reset to fix the issue.
Press the Power button ( ) to turn off the product.
NOTE:The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the back of the product.
Disconnect the power cord from the electrical outlet, and then wait 30 seconds.
Connect the power cord to the electrical outlet.
Connect the power cord to the back of the product.
Press the Power button ( ) to turn on the product.
If this does not solve the issue then the printer will most likely need to be serviced.Hope this helps!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Photosmart e-All-in-One - B110a : How can I deactivate wireless?

Hi, everyone.
I just bought HP Photosmart e-All-in-One - B110 and after the installation (which went OK), while trying to get acquainted with the printer and the rest of the functions, I pushed the Wireless button out of curiosity.
Now, every time I switch on B110, the Wireless blue light keeps blinking. Does that mean that it's working?
I do NOT want to activate wireless printing (at least for the time being). I want it deactivated permanently. Is there a way to do this?
Many thanks in advance.
This question was solved.
View Solution.

The blinking blue light means it's looking for a network to connect to. It won't connect to a network if you haven't put any info in the wireless setup. I believe there's an option to turn off the wireless radio in the settings somewhere.

Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

HP - Photosmart e-All-in-One Wireless Printer (CN731A)
Went through setup on Windows 7 64-bit, printed the test photo, came out great. Thought everything was good to go. Later, when trying to print a document, it wouldn't print. Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there. I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed. This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer. I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo? Any ideas would be appreciated!

Hello,
Try the below steps ..
While the printer is ON, Unplug the power cord from back of the printer.
Disconnect all the cables that are connected to the printer.
Wait for 30 seconds.
Plug in only the Power Cord. ( Printer would Power on ).
Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges or the Printer .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Since I installed Mountain Lion operating system, I cannot print. I have a HP Photosmart C7280 All-in-one printer. I get a message when I try to update the software "Server not available The software update service is currently not available."

After installing Mountain Lion, my printer doesn't work. I know it is connected as it shows up, The message is:
"The printer software was installed incorrectly. Please reinstall the software for this printer or conact the anufacturer for assistance."
I used the disk that came with the printer as when I go to the HP site, it tells me that Apple has the drivers needed. I unistalled the printer and reistalled. Previously, I just went to the HP website an everything worked fine for drivers, program, etc. I never had to use the CD that came with the printer. My printer is: HP Photosmart C7280 All-in-one, it is wireless, but I even took the computer and plugged it into the printer to make sure that everything was connected. Can someone please help me to get this working,
Thank you,
Cheryl Paul

Here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Infor regarding HP Photosmart Premium All-in-One Printer - C309g

HI i have a question.
I intend to buy HP Photosmart Premium All-in-One Printer - C309g for my home use.
I want to know whether i need a wireless connection forthis printer or i can use with without a wireless connection.
I have a PC with DSL but with no wireless connection.
Umer

The C309g has an Ethernet port so you can wire it to your DSL router/modem (if there are ports open in the back).
Read more here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Connecting my HP photosmart c6350 all in one printe2r to my IPAD Air

Similar Messages

Maybe you are looking for