Connecting to computers

Can someone give me an example of the java code I have to write to do the following:
I have 10 computers. From one of them, I want to connect to the other 9, map each C:\ drive so I can scan the directories for files and file versions. the java code I need help with is connecting to each computer and mapping a drive. Some computers are Windows 2000 and the others are Windows XP
Thank you!!!

It is done.
I have made the server and client code you asked for...
They are at: http://isthisonetaken.tripod.com/
It is the second one down:
2 - A java swing File mapping system
email or post here to give me feed back.
Hope it's all good.
isaac

Similar Messages

HT3819 There is no "shared" option on my itunes and i've already connected the computers, what do I do?

I need help, ASAP.

There is no "shared" option on my itunes
So there is no iTunes menu Store > Turn on Home Sharing?
How about iTunes prefs -Sharing?
and i've already connected the computers
How did you "connect" them?

Connecting two computers using ethernet

How do i connect two computers to transfer my iphoto library using ethernet? How do I know how long it will run?

Why not connect the two using Firewire Target mode. Apple explains how in:
http://support.apple.com/kb/HT1661

How to connect two computers

please help me
how to connect two computers through telephone line

Double Post. See:
http://forum.java.sun.com/thread.jspa?threadID=770305&tstart=0

Lose connection between computers on network through airport

Our connection between computers on network goes down every day or so. Connection to internet stays ok. We restablished computer connection by cycling airport extreme off and on again. Has been getting more frequent. Any suggestions or help? Faulty unit? Thanks.

As my magic crystal ball is on the shop for oil change, at the moment I'm not able to see your configuration or setup.
No info - no help

Connect 2 computers to ATV (2ndGen)

Can i connect 2 computers to my TV?
Up to now Home sharing is turned on, on both iMac and MacBook but Apple TV can only see and connect to 1 of them

Hi,
Your simply reply made me realise ! - check the library name !
It was identical on both Computers so i have changed it and i can now access both Computers from the TV.
THANKS for the reply.

I need a code that connects 3 computers

hi
I am new to java
I need a java program to that connects three computers. The program should give the
users the ability to:
? send messages to another computer
? send messages to two other computers
? receive messages from all or any one computer
? typing messages should not block receiving messages
can anybody please post the code
thank you

pavani wrote:
hihi
I am new to javaCongrats
I need a java program to that connects three computers. The program should give the
users the ability to:
 send messages to another computer
 send messages to two other computers
 receive messages from all or any one computer
 typing messages should not block receiving messages
can anybody please post the codeNo. This isn't a fuckin code mill. If you want the code either buy it or create it yourself. If you do create it yourself, we can help you if you hit stumbling blocks, but it still has to be your work and your code.
thank youYou're welcome.

I want to connect different computers these are present in different ?

I want to connect different computers these are present in different network
More on . They are not in local area network.
can i use VPN?
any suggestion?

Muneer_Ahmed wrote:
i want to make socket application.
idea behind it, a client send and retrieve data through internet also server.
client and server are at different network.
if i make VPN. can i connect these PCs through sockets?If both hosts are on the VPN and the VPN provides a route from one to the other, then yes.
However, in general one does not set up a VPN just for a single application.
Edited by: jverd on Feb 11, 2009 10:38 PM

Cannot connect two computers to the same game server HELP!

I have a Linksys WRT54G Router. I have two computers and I want to be able to use them on the same gaming server. Unfortunately, the game only have one port, so I can only port forward one of my computers. How can I configure my router to have two external IP addresses to the server so it won't kick one of my computers out. Thanks!

Hi,
I am in a gaming community and many members have a Linksys at home (but I don't know which kind exactly). Many of us try to connect two computers to the same server (many have a family). It seems it is a common problem that no one can connect two computers to the same game server.
I have a BEFSR41 V3 Firmware version 1.04.8
I use fixed IP address and no connectivity problem on Internet.
I have win XP SP2 on both computer.
I am using a DSL modem
I can connect the two computers to two different game servers at same time, but not the same server. Default port for this game is the same for all servers I use. I tried with both port forwarding enabled (in that case one PCs can connect the other not) or not (in the second case, whenever the second PC connects, the first one lose his connection to the server, no mater the order I try to connect my PCs).
Now the weird thing is that one member in my community just decided to throw away his Linksys router and he bought another brand (which I won't name to remains politically correct). Now, without changing anything in his PCs or his connection type, he can now play with two PC on the same server.
I am seriously thinking doing the same move. Since more and more game are now using Internet (and servers that controls piracy, $$) and family want to play together, not being able to connect two PCs on the same game server makes Linksys in bad situation from marketing point of view.
For example, in my gaming communtity, we now all know that Linksys can't handle two PC on same server, but other brand can...
Thank you in advance for your help.

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

Yes. The following quotation is from About Windows Migration Assistant
These are the preferred network connections, in order:
Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

Can I connect two computers to one device?

Can I connect two computers to one device? I am trying to have them control different aspects of the experiment that I'm running.

That depends upon the device. If it's GPIB, you could
use the E-NET card to convert it to LAN. That would
allow control by many computers. The only problem with
that might be sychronization. That is, Computer 1 does
its setup. Then Computer 2 does a reset. Compuer 1's
setup is now gone.
As another poster suggested, you could always network
between the two computers.
[email protected]

How to connect two computers in one room to a router in a 2nd room?

I have a Linksys modem and WRT54G router in an entry panel in my laundry room. I have newer house with cat5 cables connected from the router to computers in various rooms. In the room that we use as an office, we want to connect a 2nd computer to the network, but there is only one ethernet jack on the wall and that jack is used for the first (existing) computer in the room. I don't want to use a wireless connection for 2nd computer.
How do I connect the 2nd computer to network? Do I connect both computers to a hub in the office and connect the hub to the ethernet jact on the wall?

castor wrote:
HI...
You can definitely connect a HUB or a switch to the Wall jack and then connect the computer to the other ethernet port of the device. Make sure that the cable from the router is connected to any one of the ethernet port and not the uplink port.
"Make sure that the cable from the router is connected to any one of the ethernet port and not the uplink port."
So just for my clarification "You can definitely connect a HUB or a switch to the Wall jack"
Witch port should one use? Till now I thought one should connect the wall jack to the uplink port and the 2 computers to the other ports on the switch or hub?

Can't connect to computers on the same network and same office

Hi everyone, I have this problem from some time now, I have on the same network some computers with ethernet, and some with Wi-Fi.
All are connected to the C-Net Wireless-G Router.
My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area, but I have an iMac 2.0 next to my iBook and I can't see it.
How is that possible? Am I making something wrong with the subnet mask or IP address?
All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
If anyone could give me a hand here, I will apprettiate the advice.
Thaks to everyone, Pablo from Argentina.

rccharles wrote:
All are connected to the C-Net Wireless-G Router.
My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area,
but I have an iMac 2.0 next to my iBook and I can't see it.
How is the iMac 2.0 connected? cable or wireless?
iMac is on Wi-Fi.
How is that possible? Am I making something wrong with the subnet mask or IP address?
You are on a different subnet. In x.x.x.0 the x's are different.
All the computers are in the same subnet, cable ones and wi fi ones.
All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
Look at what ip addresses you have on each machine.
I have different IPs on each machine, do you need the numbers?
Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
Macintosh-HD -> Applications -> Utilities -> Network Utility.app
Use the ping command to see what is going on. Ping 192.168.1.254, source & destination machine. 127.0.0.1 is an alias of the machine you are on.
!http://farm3.static.flickr.com/2575/4090068351_6fb8dc3d55.jpg"!
check out port scan. This will tell you if sharing is on.
!http://farm3.static.flickr.com/2506/4090068193_7566e620cf.jpg!
I will try this
Message was edited by: rccharles

Connecting 2 computers thru Time Capsule without Internet?

I had started a question in another area (Mountain Lion) because I am trying desperately to migrate a Windows PC running Windows 7 to a new iMac. The Migration assistant on both computers does not find any computers. The Apple Care people say I am doing everything right, but now some people online are saying that I can't do this wirelessly thru Time Capsule (which we have and is the router for our office which the PC is connected to wirelessly).
The new Mac is in set up beginning mode (meaning it has not been set up wirelessly or anything yet), because on launch it offers to move the data from the PC to set up the new Mac. It is stuck "looking for a computer"
Here is the whole discussion:
https://discussions.apple.com/message/23377824#23377824
Today I went by an Apple store to ask their opinion and the guy told me that I can't connect the 2 computers via ethernet (even though that is what the Migration insturctions say to do), but he said that I shoud be able to connect each computer via ethernet to the Time Capsule and have them recognize each other.
Does this sound right to any of you???
The PC is clear across the room and no where near the internet line, so I would either have to buy a REALLY long ethernet cable to drag over to it, or take the whole computer apart to try and get it near the TC. The mac of course is no problem to move.
I just don't want to do all this if this will not really act as a network (I guess as a server of sorts).
I am confused as the TC manual says that it can be used without internet, but I don't seehow (I've tried rebooting it without a connection). I do not know why the internet is involved at all since what we need is the TC to act as a wireless router (which it is) and do not need to involve the internet at all to link the 2 computers.
I am just totally frustrated that these computers should just communicate wirelessly and/or with each other somehow and do not seem to, as Apple says they should. I know this will turn out to be something really simple and dumb and I'm just not seeing it.
Is it not possible to take the TC and reboot it with the 2 computers connected to it and create a network using the TC as a server or router without needing any internet just so I can get this stuff from the PC migrated (and then never have to deal with it again!!!!)
Any help is greatly appreciated.
Thanks!

I think where the confusion lies is that this is a brand new Mac and NEVER been set up. We are trying to Migrate from the Windows on initial setup - which is what the Mac asks you when you first start it: Language, Keyboard (english) and then if you are setting a New Mac or wanting to tranfer your info to set up from another Mac or from a PC. You choose PC and the MA automatically looks for the other PC. The Windows MA does the same thing. You launch it on the PC and it looks for the Mac to connect to.
They are not "finding" each other - even when connected directly via the ethernet cable to each other as dictated by the MA instructions (see the link you provided and click:
Transferring with the Setup Assistant that appears when your Mac starts up for the first time
This is what I am doing. This is what 2 different guys from Apple Care also said was correct.
They do not communicate. This is why some in the ML discussion area are telling me I can't do this with an ethernet cable even though these are the instructions. They are telling me to use the TC as a router between them.
The PC is already wirelessly connected to the TC but when I connect the Mac to the TC it still does nothing (because I assume it hasn't been "set up" yet to the wireless network).
I did not want to set up the Mac initially on its own because then you create a User and Password and when you migrate it creates a second User and will not migrate into the initial one you set up, ergo you forever are stuck with 2 users on login and 2 sets of stuff taking up space in your Mac.
It should do this on start up. I have NO doubt this is a PC issue, even though I disabled everything I could possibly see to do on it (this is why I need the PC geek in the UK to make sure). The Apple techs have told me some people have to disable and reboot this stuff several times (ARGH!) LOL!
Anyway I did wonder when I tried yesterday to simply take TC off the internet connection and set it up on its own, I could never get it to stop looking for internet (I rebooted it and reinstalled it with a new name and password), but when you look at it in Airport Utility (I'm using a Macbook for the set up), you see it still blinking looking for internet.
I could not find any instructions for someone to use the TC as a router only or as a server, even though you can see there are more choices in the AU setup tabs. The one guy at the Apple store (not Apple Care) said that if I connected the 2 computers to the TC it would act as a router and they could "see" each other for me to setup - but this did not work, hence I came here.
Hope I'm making sense! Thanks so much for your help.

Problems connecting 2 computers to wireless network at the same time

Switched to Mac 2 weeks ago and will never go back!!!!!
Having a slight problem with my home wireless network.. I am running Leopard 10.5.1 and my wife has Vista... For some reason we cannot connect to our wireless network unless one of the other computers is on and connected.. Example: I just opened my Macbook and it showed that I was connected.. However, I could not get any access to the internet without first turning my wifes computer on and connecting.. The same happens when my wife tries to get online.. Her laptop will not connect unless mine is connected first.. It is rather strange.. The last one on the internet is the only one with access unless the other computer is connected.. I am not sure if this is a problem with the router or a compatibility issue with Microsoft and Apple.. If anyone could help it would be highly appreciated as it is quite frustrating that when I want to connect to our network I must connect my wifes computer first.. and vice versa for her.. Can anyone help? We use a Belkin wireless router...

For $50 or so you could get a Linksys WRT54G and not have the headaches. It cannot be an issue with the computers so by default it is the router. Get a better one.
A router will be indifferent to a computer connecting unless it is set to reject them with mac filtering, the password is wrong or there is a limit set to only issue one IP address in which case both would not work. The router cannot know XP from OSX, or a mac from Windows as the standard is 802.11 and TCP/Ip not brand specific.

Can't get printer to connect to computers

I have an HP Photosmart 5512 all-in-one printer and I"m trying to get it to connnect to my computers in my home. I have a HP 2000 laptop running windows 7. I have tried all the trouble shooting software the company provides, I have unplugged and waited on router and printer. I uninstalled and reinstalled software on computer and printer. I have tried everything the company site has to offer to get this printer connected. I have even called the customer support and they won't help me even though I"m using their products, because its been a couple of years. So if there are any techs on here who know anything about this, please help. I'm about ready to throw it out the window. Its new, I only used it once a couple of years ago and put it back in the box. Now I need it for college and I can't get it to connect. Help Please.

Make and model number of modem?
Make and model number of router?
Computers connected via wire or wireless?
OS of computers?
Please detail all steps you have done to troubleshoot the issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Connecting to computers

Similar Messages

Maybe you are looking for