Connecting to development to production

HI ALL,
I have portal development server DEV1 and it was connecting to ABAP quality server QUA1.Now i want to connect
this DEV1(portal server) to ABAPproduction server (PRO1).
What are changes i need to do to connecting to ABAP Production.
I want configure SSO,for this i need to configure SLD and JCO's?
Regards,
Suresh

Hello Suresh,
What do you mean by system object? When I mentioned system object in my earlier post I was merely referring to the System you create for the backend from System Administration->System Configuration.
I am assuming that since you are connecting to the PRD systems which usually are in a load balanced mode, you will have to create a new system for PRD and enter details like the hostname, msg server, port. and assign the aliases to them.
Yes since you are using JCo's you will also have to create an ABAP system in the SLD as well.
Thanks,
GLM

Similar Messages

SSIS package fails because of excel connection manager when deploying package from development to production

Hello,
When I move the package from development to production package fails due to excel connection manager.
Error message---
Message
Executed as user: Answers\Administrator. ...lt: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50     Code: 0xC0202009     Source: CPRO_Prod_to_XLS_Worksheet_Basic_EX
Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE
DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50     Code: 0xC0202009     Source: CPRO_Prod_to_XLS_Worksheet_Basic_EX
Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE
DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50     Code: 0xC0202009     Source... The package execution
fa... The step failed.
Any help would be appreciated.

Hi Vinay,
As Visakh mentioned, the issue usually occurs because the package runs in 64-bit runtime, however, the Excel driver is 32-bit. According to your another thread, it seems that you use SSIS 2005, right? In SSIS 2005, there is no “use 32 bit runtime” option
for the package executions of a SSIS package job step. In this condition, you have two choices:
Install the 64-bit Microsoft ACE OLE DB 12.0 Provider on the production server. Here is the download link (AccessDatabaseEngine_x64.exe):
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Create a CmdExec type job step instead of SSIS Package job step, so that we can call 32-bit DTExec.exe to execute the package within command line. For more information, please see:
http://support.microsoft.com/kb/934653/en-us
Regards,
Mike Yin
TechNet Community Support

Development and Production Requirements for a Forms/Report application

Dear all,
We have an application witch run in client/Server mode using Forms/Reports 6i For 300 users.We want to migrate it on Forms/Reports 9I using Oracle 9IAS and Oracle 9IDB.
I would like to have advises about material requirements of both development and production environment((developer deskop, development appServer and databaseServer, end user desktop,production databaseServer and production AppServer).
Thank u for giving more details about my request.

I have my dev and production on 2 different databases/instances, and the workspaces have a different name aswell (think 'dev' and 'prod').
I do reuse my application ids, which makes the whole process a lot more manageable: easier for me to identify and replacing a whole application.
However, when i want to replace only 1 page, apex stumbles over the workspace. Bummer.
So i took an export of a page on both workspaces, and opened the files.
prompt Set Credentials...
begin
-- Assumes you are running the script connected to SQL*Plus as the Oracle user APEX_040100 or as the owner (parsing schema) of the application.
wwv_flow_api.set_security_group_id(p_security_group_id=>nvl(wwv_flow_application_install.get_workspace_id,1377027056414870));
end;
wwv_flow_application_install.get_workspace_id,1377027056414870));
I took both workspace IDs and keep them in a simple txt in my installation-files folder. Each time i need to import a page from dev->prod i go in the exported file from dev and change the workspace id to the id of my production workspace id. Everything works magically after that.
If your application ids also differ, you can try changing the id in the exported file aswell, but i can't tell if it works or not since i've not done that yet.
prompt Set Application ID...
begin
   -- SET APPLICATION ID
   wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,130);
   wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
null;
end;where of course you'd change around nvl(wwv_flow_application_install.get_application_id,130);

ERROR WHILE MIGRATING SSIS PACKAGE FROM DEVELOPMENT TO PRODUCTION IN EXECUTION

HI,
I have a problem while executing the package after migrating from DEVELOPMENT to PRODUCTION.
We have two SQL database connections DEVMIDDLEWARE and PRODMIDDLEWARE for dev and prod respectively. When we have created package in development we have used DEVMIDDLEWARE and we have credentials in CONFIG file of that package and executed sucessfully. When
we migrated this same package to PRODUCTION when have given credentials of PRODMIDDLEWARE in CONFIG FILE of this package we are getting error as below
"Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic
error. Verify that the correct key is available. End Error Error: 2014-10-28 07:41:44.24     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node
"DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC0202009     Source: Package Connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware"     Description: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.".
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC020801C     Source: Package Log provider "SSIS log provider for SQL Server"     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method
call failed. COM error object information is available. Source: "Package" error code: 0xC0202009 Description: "SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE
DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.". ". End Error Error: 2014-10-28 07:41:44.98
Code: 0xC0202009     Source: Package Connection manager "AGRDB01.abwr66"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record
is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'CC\epsdbuser'.". End Error Error: 2014-10-28 07:41:44.98     Code:
0xC020801C     Source: Data Flow Task OLE DB Source [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "AGRDB01.abwr66"
failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline     Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-10-28 07:41:45.00     Code: 0xC0024107     Source: Data Flow Task
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 07:41:44 Finished: 07:41:45 Elapsed: 0.859 seconds. The package execution failed.
The step failed."
Can anyone help for this error.
Many thanx in Advance

Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Having trouble connecting SQL Developer to database on LINUX machine

Having trouble connecting SQL Developer to database on LINUX machine
Hello,
I am trying to connect my windows 7 home premium machine to an oracle database 11g on a RedHat 5 machine using SQL Developer. i got this error message on SQL Developer
Status : Failure - Test failed :The Network Adapter could not establish the connection
on Linux
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                03-APR-2013 16:13:13
Uptime                    7 days 22 hr. 16 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orc11g" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11gXDB" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11g_XPT" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> and TNSPING
tnsping 172.x.x.x
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
OK (0 msec)
[oracle@ltebilling ~]$Tnsnames.ora On Linux ,
ORC11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orc11g)
)Listner on Linux ,
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
)/ect/hosts Linux ,
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1               localhost.localdomain localhost
172.x.x.x             LTEBillingand there is no problem of ping linux from windows
Edited by: user11309581 on Apr 11, 2013 3:16 PM

yes really i'm already enaple the port 1521 and SELINUX=disabled
[root@ltebilling ~]# /etc/init.d/iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target     prot opt source               destination
1    RH-Firewall-1-INPUT all -- 0.0.0.0/0            0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target     prot opt source               destination
1    RH-Firewall-1-INPUT all -- 0.0.0.0/0            0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target     prot opt source               destination
Chain RH-Firewall-1-INPUT (2 references)
num target     prot opt source               destination
1    ACCEPT     all -- 0.0.0.0/0            0.0.0.0/0
2    ACCEPT     icmp -- 0.0.0.0/0            0.0.0.0/0           icmp type 255
3    ACCEPT     esp -- 0.0.0.0/0            0.0.0.0/0
4    ACCEPT     ah   -- 0.0.0.0/0            0.0.0.0/0
5    ACCEPT     udp -- 0.0.0.0/0            224.0.0.251         udp dpt:5353
6    ACCEPT     udp -- 0.0.0.0/0            0.0.0.0/0           udp dpt:631
7    ACCEPT     tcp -- 0.0.0.0/0            0.0.0.0/0           tcp dpt:631
8    ACCEPT     all -- 0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED
9    ACCEPT     tcp -- 0.0.0.0/0            0.0.0.0/0           state NEW tcp dpt:1521
10   ACCEPT     tcp -- 0.0.0.0/0            0.0.0.0/0           state NEW tcp dpt:22
11   REJECT     all -- 0.0.0.0/0            0.0.0.0/0           reject-with icmp-host-prohibitedbut from windows system when i'm try tnsping i got this error
C:\Windows\system32>tnsping orc11g
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 11-APR-2
013 14:44:09
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\ubai\product\11.2.0\dbhome_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x
.x)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orc11g))
TNS-12535: TNS:operation timed out
C:\Windows\system32>

Crystal Develop and Production Guidelines in SQL Server (Crystal 9)

We have development and production environment on 2 different machines.
It seems when we want to migrate a report from dev to prod, we need to reset the DSN or connection and crystal then forces us to respecify all field names in a report.
It is a big pain. Has anyone seen this?
Thanks
Ken Light
DBA Interior Health

Hi
When you migrate a report, you need to
- Create a DSN with same name on Production as it was on Test.
- Do a set Datasource location.
- Verify database to ensure all changes made in the database are reflected.
- If you have used stored procedure with parameter in your report, then uncheck the above option and then refresh the report.
Hope this helps!!!
Regards
Sourashree

Unable to get changes done in Development to Production

Hi Gurus,
I have successfully transported Bex Query from BID to BIP system. Now I made some changes in the Bex Query in BID and transported to BIP But I am unable to get changes done in Development to Production.
Regards
Amit Srivastava

Hi Amit,
Its because package infomation of new objects that are used in bex query are local object($tmp). For this reason, althouh you are getting a request via rsa1 and doing some changes in bex query, only the objects which are has different package from $ tmp, written into request.
For the solution, you need to go rsa1 and transport connection, select your bex query then select 'only necessary objects', then transport this request.

MII Development - Quality - Production promotion

Hi
Does anyone has experience in promotion of MII projects from Development to Production via SAP standard transporation?.
What we currently doing is transfer (export imports) of MII projects from one server to another server (i.e Development server to Test server and then to Production Server). I know there is CTS. Is CTS onyl available for ABAP or also available for MII?
Issues that we face during the transfer (import and exports) are
- The System connections and Data Servers' names have to be rename to have exact name as in the current system.
- The SQL code , has to be rename to match for each system. Especially if you work with Schema (writing schema names in the SQL code).
- This means the development has a lot of dependency for each current systems.
How do you deal with that???
Edited by: Seng Kiang Hoe on Dec 14, 2010 10:32 AM

Hi,
Your current promotion or transport process is common for MII 12.0 customers. New in 12.1 is the ability to use content management within the workbench for your MII objects. It uses [NWDI|http://help.sap.com/saphelp_mii121/helpdata/en/48/cfd8b4c1d310b4e10000000a421138/content.htm] to do this. You may want to research it further.
The [MII 12.x best practice |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f08d7ae2-6f56-2c10-50b4-8a3bb1d43502]guide talks about naming your data servers so that you don't have to change them when you transport. You should look into it and make some changes.
Regards,
Kevin

COnnection to Developer/2000 Forms4.5 to Oracle8.1.4 Beta

Hi,
I am not able to connect from Developer/200 Forms 4.5 to Oracle
8.1.4 Beta.
Both the products are on one m/c and are running on Windows NT.
Please Help.
Raghu Nemani
null

Raghu Nemani (guest) wrote:
: Hi,
: I am not able to connect from Developer/200 Forms 4.5 to
Oracle
: 8.1.4 Beta.
: Both the products are on one m/c and are running on Windows NT.
: Please Help.
: Raghu Nemani
Probably, in your m/c was installed an old sqlnet driver.(Not
compatible)
Remove the old sqlnet driver and install new sqlnet driver from
the Oracle 8.1.4 Beta CD.
Oracle DB can not receive connection if there is an old sqlnet
(not compatible) driver in one m/c but if you connect from other
m/c, it will work.
I hope it'll helps
null

Development and product environment

Dear all,
I want to setup two databases in seperated server. One for development purpose and another for product environment.
Which good method/tool in oracle can transfer data (like pl/sql,tables,fields) from
development to product environment?
Thanks you

I would strongly suggest cloning the database from Development to Production, using RMAN. You get a proper copy that way - and it isn't hard to do. Howard Rogers has all the answers here: http://www.dizwell.com/prod/node/9

URL Link Difference in development and Production

Hi all ,
im seeing the URL for support desk BSP page different comaparing in development and production .see the below
http://s01tdi135.intra.tm:8003/sap/bc/gui/sap/its/webgui?sap-language=E&sap-client=011Code=/08&pcmd=CRMVW&pnumb=45CB5F7BE4030746000000000A0135AD&pvariant=&
in the above URL is available in Dev server. we are passing the GUI here , so in program we are concatenating the GUID with the URL.
But in production , when you concatenate this , its not coming ...becuase when u see the URL for message,refer below
http://s53kj173.intra.tm:8001/sap/bc/gui/sap/its/webgui?sap-language=E&sap-client&transaction=DSWP_SAPSHORTCUT&OkCode=/08&pcmd=CRMMR&pnumb=&pvariant=&paarg=X&
Here im not able to see the GUID ... how to show the perticular message in e mail ...
actualy how i can pass the parameter ..that means support no to this URL.
pls explain ...

Actualy problem with user authorization. solved.

Questions on Analyzer Upgrade and Moving Analyzer Reports from Development to Production

Hi,We run Analyzer 5.0.3. We are planning to go to Analyzer 7.2. Did any body go thru this upgrade? If so, what is your opinion and tips that may help. Also, we never had Analyzer development environment. We are planning on having Analyzer development environment. In our installation, all of the Analyzer reports are centrally developed based on user requests. Once we have development and production at the same Analyzer version, if a report is developed in the development system, how can the report be mirateed/moved from development to production system?Thank you for your help,Prasant

Balaji,
Has this been done yet?
Gary
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
We are working on a document using which one should be able to move a portal instance from one database to another. It is still in draft version, once it is finalized we will be putting it on otn.
Thanks and Regards
Balaji<HR></BLOCKQUOTE>
null

How to populate SNDPRN with different values in Development and Production?

Hello experts,
I have to fill the field SNDPRN in the message mapping with a different value in Development and in Production. As I am new to PI, I used a simple solution - but it is rather ugly: I set a constant value in the mapping in development and a different one in Production. However, I would like to know if there is any solution to have a condition in the mapping like:
IF system is Development, set SNDPRN as Constant1.
IF system is Production, set SNDPRN as Constant2.
(And eventually IF system is Test, set SNDPRN as Constant3)
Thanks in advance for your help,
Luis

Hi Luis,
      You can go with the parameterized mapping , where you can provide different values for SNDPRN in interface determination for development and production.
      At point of time if you want to change the values it requires only a change in the configuration.
      Please refer the below links for reference;
Parameterized Mapping Programs - Enterprise Services Repository - SAP Library
http://scn.sap.com/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
     We are following the same approach for some of our interfaces.
- Muru

Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7 (Apex Listener)

Background
1. Weblogic 10.3.6.0 running on Oracle Linux 6.5 with Oracle JRockit(R) (build R28.2.3-13-149708-1.6.0_31-20120327-1523-linux-x86_64, compiled mode)
2. Oracle Apex 4.2.1
3. Apex Listener 1.1.3
4. Apex and Apex Listener running on the Weblogic box above
5. SQL Developer 4.0.2 running on Windows 7 64 bit / Java 1.7.0_55
Updated Apex to 4.2.5 via p17966818_425_Generic.zip patchset. Apex environment running fine as do all applications via Listener 1.1.3
Updated Oracle Listener to the latest version of Oracle REST Data Services 2.0.7
Current Status
Apex Applications and RESTful services are running fine.
Problem
Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7
Error message in SQL Developer - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
Additional Information
Steps followed -
1. The oracle users APEX_LISTENER and APEX_REST_PUBLIC_USER did not exist, so I ran apex_rest_config.sql from the APEX 2.4.1 patchset whilst connected sys as sysdba and provided the same password as APEX_PUBLIC_USER for both users.
2. I also ran
grant insert, delete on APEX_040200.wwv_flow_rt$privilege_groups to APEX_LISTENER;
alter session set current_schema = APEX_LISTENER;
create or replace synonym wwv_flow_rt$privilege_groups for APEX_040200.wwv_flow_rt$privilege_groups;
as per Oracle SQL Developer User's Guide Release 4.0
3. copied ords.war to apex.war
4. java -jar apex.war configdir /u01/app/oracle/admin/apex/devdomain1/
5. java -jar apex.war
Jun 5, 2014 5:15:31 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter the name of the database server [localhost]:dbservername
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:1
Enter the database service name:dbservicename
Enter the database user name [APEX_PUBLIC_USER]:
Enter the database password for APEX_PUBLIC_USER:
Confirm password:
Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:2
Jun 5, 2014 5:16:52 PM oracle.dbtools.common.config.file.ConfigurationFiles update
INFO: Updated configurations: defaults, apex, apex_al, apex_rt
Enter 1 if you wish to start in standalone mode or 2 to exit [1]:2
6. java -jar apex.war user adminlistener "Listener Administrator"
Jun 5, 2014 5:18:52 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter a password for user adminlistener:
Confirm password for user adminlistener:
Jun 6, 2014 5:19:12 PM AM oracle.dbtools.standalone.ModifyUser execute
INFO: Created user: adminlistener in file: /u01/app/oracle/admin/apex/devdomain1/apex/credentials
7. Updated the defaults.xml file
Added
<entry key="apex.security.user.roles">RESTful Services</entry>
<entry key="apex.security.developer.roles">OAuth2 Client Developer, SQL Developer</entry>
as per Oracle SQL Developer User's Guide Release 4.0
Changed
<entry key="debug.printDebugToScreen">false</entry>
to
<entry key="debug.printDebugToScreen">true</entry>
for RESTful debugging
Added
<entry key="security.verifySSL">false</entry>
to use OAuth2 in Non HTTPS Environment as per Oracle® REST Data Services Installation and Configuration Guide, Release 2.0
8. Deleted the Admin and Manager Roles within the apex application deployment which were part of the Apex Listener 1.1.3 install
9. Deployed the apex.war in weblogic
10. Stopped and started the weblogic server to which apex.war was deployed
11. In SQL Developer, View, RESTful Services. In the RESTful services windows hit connect, Create a new connection,
Connection Name DEV
Username adminlistener
selected http protocol
Hostname weblogicservername
Port 7250
Server Path /apex
Workspace (blank)
On the Authentication dialog
Username adminlistener
Password passwordsuppliedabove in step 6
Response is a dialog box titled Authentication Failed
message - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
NOTHING UNUSUAL IN ANY OF THE WEBLOGIC LOG FILES, EXCEPT THAT IT STATES
'Oracle REST Data Services version : 2.0.6.27.18.06' when I've installed 2.0.7.
Any help much appreciated

Further to the above post, I thought I'd simplify my Apex Listener install just to see if I can connect to it via SQL Developer
So downloaded the latest version 2.0.8 and decided to configure and run the Listener on my pc whilst still connecting to the same database.
Operating system : Window 7 Pro 64 bit
Oracle Apex Listener 2.0.8
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
Went through the configuration as above, once started I tried again to access the listener via SQL Developer. This time I received this output from the listener:
INFO: Error: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found, occurred during execution of: [CALL, insert into wwv_flow_rt$approvals (user_name,status,client_id,security_group_id,created_by,created_on,updated_by,updated_on) values(/*in:user_id*/?,/*in:status*/?,/*in:client_id*/?,/*in:tenant_id*/?,upper(/*in:user_id*/?),/*in:created*/?,upper(/*in:user_id*/?),/*in:created*/?), [tenant_id, in, class java.math.BigInteger], [client_id, in, class java.math.BigInteger], [user_id, in, class java.lang.String], [status, in, class oracle.dbtools.rt.oauth.ApprovalRequest$Status], [created, in, class java.sql.Timestamp]]with values: [adminlistener, APPROVED, 3858401374580004, -1, adminlistener, 2014-06-23 12:19:18.785, adminlistener, 2014-06-23 12:19:18.785]
SQL Developer responded with an Authentication Failed titled dialog with the following displayed in the body of the dialog
Cannot connect to DEV.
<!DOCTYPE html>





<html>

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<style type="text/css" media="screen">html,body,div,span,h3,p,ol,ul,li,header,hgroup{margin:0;padding:0;border:0;font-size:100%;font:inherit;vertical-align:baseline}header,hgroup{display:block}body{font:normal 12px/16px Arial,sans-serif;margin:0 auto;background:#6a9cda}header#xHeader{border-bottom:1px solid #8fa4c0;position:relative;z-index:10;background:none #000}header#xHeader hgroup{width:974px;margin:0 auto;position:relative;height:36px;background:none #000}header#xHeader a#uLogo{margin:8px 0;display:inline-block;font:bold 14px/20px Arial,sans-serif;color:#AAA;text-decoration:none}header#xHeader a#uLogo span.logo{color:#F00}.no-css3 div#xContentContainer div.xContent{padding-top:14px}.no-css3 div#xContentContainer div.xContent div.xMainLeft h2{margin-top:0}div#xWhiteContentContainer{margin-bottom:30px}div#xWhiteContentContainer.xContentWide{background:#FFF;margin-bottom:0}div#xWhiteContentContainer.xContentWide div.xWhiteContent{-moz-border-radius:0;-webkit-border-radius:0;border-radius:0;-moz-box-shadow:none;-webkit-box-shadow:none;box-shadow:none}div#xWhiteContentContainer div.xWhiteContent{width:974px;margin:0 auto;padding:0 0 20px 0;background:#FFF;min-height:500px;-moz-border-radius:0 4px 4px 4px;-webkit-border-radius:0 4px 4px 4px;border-radius:0 4px 4px 4px;-moz-box-shadow:0 1px 2px rgba(0,0,0,0.15);-webkit-box-shadow:0 1px 2px rgba(0,0,0,0.15);box-shadow:0 1px 2px rgba(0,0,0,0.15)}div#xContentHeaderContainer{background:#6a9cda;-moz-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;-webkit-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset}div#xContentHeaderContainer div.xContentHeader{width:974px;margin:0 auto;padding:30px 0 32px 0;position:relative;min-height:60px}div#xContentHeaderContainer div.xContentHeader h3{font:bold 24px/24px Arial,sans-serif;color:#fff;text-shadow:0 2px 1px rgba(0,0,0,0.25);margin:0 0 20px 0}div#xFooterContainer{min-height:200px;border-top:1px solid rgba(0,0,0,0.15);background:#6a9cda}body.errorPage div#xContentHeaderContainer div.xContentHeader{min-height:30px}body.errorPage div#xContentHeaderContainer div.xContentHeader h3{font:bold 30px/30px Arial,sans-serif;color:#FFF;text-shadow:0 1px 2px rgba(0,0,0,0.25);margin:0}div.errorPage p{font:normal 14px/20px Arial,sans-seri;color:#666;padding:0 0 10px 0}div.errorPage ul{list-style:disc outside;padding:0 10px 0;margin:0 0 20px 0}div.errorPage ul li{font:normal 12px/16px Arial,sans-serif;color:#666;margin:0 0 8px 10px}pre{font-family:Consolas,"Lucida Console","Courier New",Courier,monospace}
</style>
<script type="text/javascript" charset="utf-8">
'header hgroup'.replace(/\w+/g,
function(n) {
document.createElement(n)
</script>
<title>Internal Server Error</title>
</head>
<body class="errorPage">
<header id="xHeader">
<hgroup>
<a id="uLogo" href="./"><span class="logo">ORACLE</span>
REST DATA SERVICES</a>
</hgroup>
</header>
<div id="xContentHeaderContainer">
<div class="xContentHeader">
<h3>
<span class="statusCode">500</span> - <span
class="statusMessage">Internal Server Error</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons">
</ul>
</p>
<p>
<pre>Request Path passes syntax validation
Mapping request to database pool: PoolMap [_failed=false, _lastUpdate=-1, _pattern=null, _poolName=apex, _regex=null, _type=REGEX, _workspaceIdentifier=null, _serviceName=null]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
No Tenant Principal established yet, continuing processing
APEX_LISTENER pool exists, continuing processing
No matching tenant found for: oauth2, cannot dispatch
Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true] for: POST oauth2/token
oauth2/token authorized as: p6xycV-2QceFnFHkWyJlnA..
</pre>
</p>
<p>
<pre>WebException [statusCode=500]
at oracle.dbtools.rt.web.WebException.webException(WebException.java:343)
at oracle.dbtools.rt.web.WebException.internalError(WebException.java:262)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:514)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApprovedRequest(JDBCOAuthDataAccess.java:181)
at oracle.dbtools.rt.oauth.OAuthAuthorization.resourceOwnerCredentials(OAuthAuthorization.java:654)
at oracle.dbtools.rt.oauth.OAuthAuthorization.tokenRequest(OAuthAuthorization.java:273)
at oracle.dbtools.rt.oauth.TokenHandler.post(TokenHandler.java:44)
at oracle.dbtools.rt.web.RequestHandler.response(RequestHandler.java:268)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:361)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:85)
at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:93)
at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)
at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1046)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
at sun.reflect.GeneratedMethodAccessor28.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:230)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at com.sun.proxy.$Proxy44.execute(Unknown Source)
at oracle.dbtools.common.jdbc.JDBCInsert.execute(JDBCInsert.java:58)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:487)
... 34 more
</pre>
</p>
</div>
</div>
</div>
<div id="xFooterContainer">
</div>
</body>
</html>
I am assuming this must be part of the problem I am seeing this the Weblogic deployment in my original post.
Does anyone have any suggestions on how best to tackle this?
Regards,
Derek

How to transport the data contains in the table from development to product

How to transport the data contains in the table from development to production.
Please let me know ASAP.

Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe

Connecting to development to production

Similar Messages

Maybe you are looking for