Connecting to remote servers

I need to connect via RDP to some windows servers that we have. Currently with my laptop, I connect with Putty then open an RDP session.
Since the ipad seems to only want to run one app at a time, How do I get an SSH RDP session established with my win 2003 servers from my ipad?

auhhh yes i know that, however, I haven't seen any so far that have SSH built into them. So hence I asked the question if anyone knows of one or how to do it with a work around.

Similar Messages

Cannot connect to remote servers or exchange email?

I have the same issue and can connect via any other connection including Att hotspots, wifi etc etc. I do not think the issue is related to my system and to clarify, I am not connecting via VPN. Any help on this is greatly appreciated.

VZW mobile broadband devices sit behind a NAT firewall. The NAT hides your public IP Address and the firewall blocks custom ports from communicating to devices on the VZW network. Pending on what you are trying to do on your remote servers or exchange servers one of the other is likely broken due to the nature of the VZW network.
The work around is to setup a VPN to a VPN server that allows you to make the customizations that you need to support your applications. That or buy a static IP address from VZW for $500. That or configure your applications to communicate over the internet over more traditional protocols and ports.
Contact your system or network administrators in charge of your remote servers to find out what the requirements are for connecting to them. See if they can offer you any work arounds or custom configurations. Chances are others have the same limitation and they already have something cooked up to work around it.

Finder not connecting to remote servers and fail to reboot

I've posted this in the leopard section, but I think this is also an issue on a snow leopard box as well...
I'm running several Mac minis, all relatively up to date (I don't update the day updates come out, usually waiting a week or so to see how well it's accepted across the community).
I have this issue occasionally where the Mac will fail to connect to remote windows boxes. It seems to be fine for other apple devices, but I just see the "connecting" message without it ever getting anywhere. I can't really seem to nut out when in particular that it happens.
What I usually do find it that when it dies happen, a reboot of the machine in question (the Mac, not the windows box) resolves the issue. Relaunching the finder does not fix the problem. If I try and manually restart the connection (Go--> connect to server) the little dialog box comes up, but never connects. What makes it worse it never fails either.
Usually once this happens I can not soft restart the computer. ie selecting reboot or shutdown brings me to a pale blue screen with the "waiting" animated circle in the middle if the screen. I have left this for an entire evening, it will not reboot, in the end I have to hold the power off and force it off. I've just dine some googling on these issues and the whole time 10-15 minutes worth, I am still just seeing this animated "loading/waiting" spinning piece of *^}]#%% that tells me nothing
Any ideas?

Can you check your firewall settings on Red Hat Machine and make sure port 8134 is open as this is default port on which Apache which comes with FMS listens.
But if you think i did not get your question right , please let me know.

CS3 / CS4 connection to remote/testing servers times out.

Hello,
I have 2 questions:
1. Can DreamWeaver be configured to bind once for multiple ldap authentication transactions?
2. Can DreamWeaver be configured to increase it's timeout when connecting to remote/testing servers?
Details below ...
============
Setup
Client: DW CS3/4 clients on WIN XP
Server: Suse Linux 2.6 (SP3)
Protocol: WebDAV via apache 2.2, LDAP authentication
Problem description
Dreamweaver Clients fail to connect to remote/testing servers during peak usage hours.
Analysis
Connecting to the remote/testing servers requires approximately 900 database transactions to test user privileges for content, simplified as the following:
900 x [ bind + lookup + unbind ]
During peak hours, this process can sometimes take upwards of 30 seconds to complete. In these cases, Dreamweaver times out (at approximately 40 seconds) and then user must try the process again.
Possibe Solutions
a) Increase cache size in apache.
This has been done, but we have a large client base, and with 900 look-ups per user, we hit the ceiling of an acceptable cahce size. This solution does not work for us.
b) Change DreamWeaver authentication to only bind once.
Binding 900 times for 900 separate lookups is wasteful. Can DreamWeaver be configured to bind once and have multiple transactions?
[ bind + [ 900 x lookup ] + unbind ]
c) Change DreamWeaver timeout value
Currently DreamWeaver times out on connection attempts at about 30-40 seconds. Can DreamWeaver be configured to timeout at a different value?
============
Thanks!
Graham

Thanks for the super fast response...
Dummy me... It was the firewall on the Oracle host XP box that was the problem
Appreciate the help
Thanks again

After update to Maverick, I can't ssh to remote servers from my Mac.

I can ssh localhost, but I can't ssh to remote servers.
cykuo-MBP:~ cykuo$ ssh root@my_server_ip
Read from socket failed: Connection reset by peer
cykuo-MBP:~ cykuo$ ssh root@my_server_ip
Read from socket failed: Operation timed out
cykuo-MBP:~ cykuo$ ssh -vvv root@my_server_ip
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 51: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to my_server_ip [my_server_ip] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/Users/cykuo/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /Users/cykuo/.ssh/id_rsa type 1
debug1: identity file /Users/cykuo/.ssh/id_rsa-cert type -1
debug1: identity file /Users/cykuo/.ssh/id_dsa type -1
debug1: identity file /Users/cykuo/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "my_server_ip" from file "/Users/cykuo/.ssh/known_hosts"
debug3: load_hostkeys: loaded 0 keys
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
Read from socket failed: Operation timed out
cykuo-MBP:~ cykuo$

I used to use 2 keyboard keys - It now works with only 1.
So it works now , but different.
Thank you.

User-friendly way to issue chown commands on remote servers

I'd like my technically unversed users to have, on demand, the benefit of chown commands giving them ownership of certain files being executed on remote servers. I'd like this to be doable without administrators' involvement and with no physical access to the servers by any of the users being entailed.
By "benefit of chown commands" I mean the results a competent user would get entering the command if he or she were actually doing so. By "technically unversed" I mean specifically that said users aren't and won't ever be trained to ssh into subject servers and issue chown commands themselves directly.
I should mention that the "Get Info" interface does not in this case avail users of a way to take ownership of particular files because ACEs apply to the files in question. That ACEs apply changes what is presented: instead of any editable fields under Ownership and Permissions, all users see in the "Get Info" interface is a list of whatever ACEs apply.
Please note that users do, by virtue of ACEs, have "change ownership" permissions for the files in question. Also, authentication to the servers in question under subject users' own logins is possible as necessary.
What I'd like to start with is getting some idea how complicated this could be for me to do myself as a beginning AppleScripter. I'll describe what I guess would be involved and hope for someone to shed light.
I'm guessing that something the user at his or her own machine does involving a file he or she has selected would constitute an Apple Event which a process on the client would send to a process on the server. Then I expect the server process would issue the chown command locally respectively of
1) which file was selected when the Apple Event took place, and
2) subject user's identity.
Finally, I expect some feedback might contingently be sent to client process incidentally to need to give user feedback.
Is this a fair sketch of how this should work? What is a beginner with limited time likely to accomplish attempting this?
(Find context for this posting here: http://discussions.apple.com/thread.jspa?threadID=831517&tstart=0)
PowerMac Mac OS X (10.4.8)

First, if I understand you correctly, I'd be using
Curl and, say, Perl rather than Applescript to get
this done. In other words, what you wrote in
Applescript is about all I'd need in that
language--yes?
That's correct, give or take any errors in the script. (For obvious reasons I didn't test it.)
Then, please note that I want to chown, not chmod. Is
this an issue?
Nope. (Beyond what you pointed out below.)
I am looking at Perl documentation and read that "on
most systems, you are not allowed to change the
ownership of the file unless you're the superuser..."
(http://perldoc.perl.org/functions/chown.html).
However, isn't apache running as root?
I never thought about that. Wow, this is complicated! Are you really sure you can't make do with chmod instead?
Anyway, the answer is yes and no. The main Apache process usually runs as root, but executes CGI scripts (and other requests) as another user to avoid inherent insecurity. So unless you do something terribly, terribly insecure, you will not be able to chown from Perl. (And, although I am often lax about security, enabling root access for CGIs strikes even me as dangerous, which means it's a very bad idea.)
Really what you want is for the CGI, which does not run as root, to hand off to another process which does. I'm not a Unix guru, and would never claim to be, but I think the two following methods might work:
1. Set up a cron job running as root which looks in a directory once every minute/hour/whatever. The file name should be the user to change the owner to, and it should contain a delimited (in some form; return is possibly safe) list of files. Have the cron job walk through the list of files and use chown, then clobber the contents of the file. (Note that a CGI can use "chmod", which can make sure that the files it creates in the directory are readable by the cron job.) (Also note that you'll want to use flock to avoid race conditions between the cron job and the CGI!) This method would not be instantaneous, since the cron job only runs periodically.
2. Set up a script which runs as root which takes a line of text in the format:
user:path/to/file
and executes chown using that information. Make this process run at startup as root. Have it open a named pipe, with permissions such that CGI script can write to it, and watch for input from that pipe.
Some general notes:
A. Whatever you do, make sure that the binary/script/whatever running as root can't be written to by anyone who doesn't have root permissions.
B. Make sure to check that the user and file actually exist before doing anything with them. (And make sure to do it in the root process, since you have no guarantee that someone won't figure out what's going on and come up with some clever injection scheme to make your root process break security.) (And don't do it by passing a command to the shell; use Perl's chown or some equivalent, so that you'll be somewhat less vulnerable.)
C. For that matter, don't forget to check and make sure that the path you're about to chown is within the share point, and that the user you're going to chown to makes sense in context, so that nobody can (for example) take over someone else's user directory, or get write permission to /sbin, or something evil like that. (In fact, it might be for the best if you limited the chown operations to files only, just to be sure.)
Also, I get the part about how a constraint involving
"do shell script" method argues against using pure
Applescript in this case. But just for my information
is Applescript otherwise sufficiently capable?
If it weren't such matter of getting everything on
one line, could Applescript send commands between
hosts, convert local paths to paths on servers, issue
change ownership commands, and handle authentication?
Do methods adequate to those purposes exist in
Applescript?
Or would using multiple scripting languages be
entailed anyway? I'm guessing the latter.
Yes and no. Helpful answer, right?
First and foremost: AppleScript was originally created as a language to control programs, which would have an extensible grammar through the installation of files called "Scripting Additions". It has since been puffed up via AppleScript Studio to an application-building language in its own right, but the language itself does not have support for a lot of things which, nevertheless, the language can do by controlling another program or by extension.
AppleScript can send messages between hosts. If the remote host is a Mac, and has "Remote Apple Events" turned on in the "Sharing" control panel, then you can send commands to programs on the remote machine almost exactly as though they were local. (The only differences are in how you specify the application and how you let AppleScript know what the remote application "understands".) This support is built into the language.
If the remote host is not a Mac, you must control a program which can "translate". When it comes to terminal programs, for security reasons Apple did not include any interactive systems which could be controlled. (Although they did include "expect", I see, which would theoretically allow you to work around this...)
Since converting a path is really just text processing, yes, AppleScript can do that. I didn't try to build that in because I am under the impression that you know some other language/shell scripting tool better than AppleScript, so it makes better sense for you to put as much of the work into the parts you know, in order to make debugging easier. One method of doing it in AppleScript:
set x to [a POSIX path found somehow for a file on a connected server]
if (the offset of "/Volumes/" in x) is 1 then
-- "the offset of" uses 1-based offsets, not 0 as in most languages
set x to text 10 through -1 of x
-- This removes "/Volumes/" from the beginning of x
set x to text ((the offset of "/" in x) + 1) through -1 of x
-- That removes up through the next slash, which is the volume name
set x to "/Path/To/The/Share/Point/On/The/Server/" & x
else
error "The path isn't in /Volumes/, so either the server is mounted in a nonstandard way or the path isn't on a remote host at all." number 9000
end if
(The other method of which I am aware is to change AppleScript's text item delimiter to "/", convert the path to a list, test whether the first item is "Volumes", then put together items 3 and up into a string again. I have always had a semi-irrational prejudice against using this method because Apple's documentation circa about 1996, from which I learned AppleScript, made it sound like this might be dangerous, but it works.)
The Finder (which can be scripted) can apparently change ownership and permissions -- a fact which I did not know until just now; I must have missed it last time I looked for it -- and of course "do shell script" can be used to call "chmod" and "chown". The problem with both of these methods, vis-a-vis your particular difficulty, is that your files are not local. You could turn on Remote Apple Events and have the Finder do it, but that's really a security hole. And a potentially maddening one to figure out if anyone starts exploiting it.
I'd stick with a CGI and the cron/named pipe scheme. No matter what you do you're going to have a little extra security risk, just because chown requires root permissions, but minimizing that risk is probably a good thing.

SQL 2012 Management Studio Remote Servers Service Status Slow/Stops Working

This is a huge annoyance. I manage about 50 SQL instances of SQL Server versions 2005-2012 and I noticed that it takes 1-2 seconds to load the service status (green arrow) on each individual server. If you then connect to a server, you have to
wait for all the statuses to be loaded first in the Registered Servers list before it loads the statuses for servers in the Object Explorer. This happens whether the servers are registered in Local Server Groups or Central Management Servers, and whether
I have access to all servers (as windows local administrator and sa), or not. It also happens regardless of whether I run as Administrator or normally on my instance of SSMS (which is SQL 2012 Development on Windows Server 2008 R2).
These servers are also registered in alphabetical order by group and server name, which means that if I have "DEV" groups, they will be registered before "PROD", unless I rename accordingly. It sometimes takes a few minutes, if
I'm lucky, to get a server I connect to to load, which means I can't use SSMS to really manage any remote servers and start/stop/pause/resume/restart services.
Worse, sometimes due to a server becoming unavailable (due to updates/patches/failovers), SSMS is unable to load the service statuses anymore for any new server connections made to object explorer, resulting in the loss of ability to view/change service statuses.
In this case, there is no way to recover (Refresh of Central Management Servers does nothing), except to close SSMS and open it again, and then wait again for all the statuses to load.
I have lived with this since first installing SQL, and regardless of the Windows Updates and SQL patches applied, the problem has never gone away. This also happens if I load SSMS in Windows Server 2012. Its starting to become a huge issue now
that I have to patch several servers each month.
I have already checked WMI permissions, GPO, firewall, etc. as per all the suggestion on the internet, including this post
http://www.sqlservercentral.com/Forums/Topic825246-146-1.aspx. None of these suggestions have made a difference, as my real problem is one of connectivity and performance, and
not security, which most of these suggestions apply to. Of note, all servers are in the same domain, firewall is disabled across the board, correct permissions for local administrators exist for remote registry settings, WMI, GPO, etc, and all service
accounts and windows accounts that are used are local admins and sysadmins.
My work-around has been to delete the Central Management Server and any local server group registered servers, close and re-launch SSMS, and then connect to a server I'm interested in via Object Explorer. Otherwise, close and re-launch will take forever.
My other alternative is to RDP into the remote server and manage services via SQL Configuration Manager locally.
If anyone has any ideas on how to fix this, or make it go faster, I'd really appreciate it.
Diane

Hi Satish,
Thanks for taking the time to reply. Yes, I actually am already using work-arounds (i.e. methods other than SSMS) to accomplish my tasks. My issue is that this is supposed to be working and provide a nice GUI so that you can easily visualize
any issues, and address them directly, without having to hodge-podge access via scripts or 3rd-Party tools.
Since no one else has any comments, I guess there are no plans to make remote server administration work with SSMS properly then, and that kludge methods are the only ones being advocated.
Diane

HTTP Response :500 unable to connect to remote system.

Hi,
I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3.
The error reads with red flag:
HTTP Response :500 unable to connect to remote system.
Please tell me what can be the reason.

Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh

Exchange 2010 - Outlook is dropping connections to Exchange servers

Hello Everyone,
I need some help in an urgent case that I'm dealing with.
We are running Exchange 2010SP3 with RU4, using external load balancer (F5).
This morning we got complains from any single user on our system telling that their Outlook clients is showing "Disconnected" or "Trying to connect" status.
First thing that we checked was if their mailboxes are accessible from OWA - the answer is yes.
Connection status is starting with "Connecting" then dropped.
We thought maybe it is coming from one of the CAS servers, so we started by removing each of the two servers at a time, but this helped only for few minutes, OWA was accessible and Outlook could connect to the servers, after few minutes, the connection was
dropped again.
MS Remote Connectivity checks are passing so it is even unclear because we are failing to see what and where is the real issue.
No errors on the hosts.
Any advice here? We have 300 disconnected users.

Do the Outlook clients connect through the F5 as well?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Could not connect to remote service - java.lang.NullPointerException

Hi,
I'm struggling to get RMI to work on two servers. Locally my client and server work fine together although when I deploy I get a null pointer exception the first time I try and invoke a remote method. I've tried stopping the server app to see if it is actually connecting at I get a connection refused exception when its stopped so I'm assuming it must be connecting.
Could not connect to remote service - java.lang.NullPointerException
com.jws.remoteServices.RemoteUpdateServer.addNewReport(RemoteUpdateServer.java:61)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
java.lang.reflect.Method.invoke(Method.java:616)
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)
sun.rmi.transport.Transport$1.run(Transport.java:177)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:173)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667)
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
java.lang.Thread.run(Thread.java:636)
sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:273)
sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:251)
sun.rmi.server.UnicastRef.invoke(UnicastRef.java:160)
java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:195)
java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:149)
$Proxy0.addNewReport(Unknown Source)
jasperserver.ReportHandler.run(ReportHandler.java:81)Any help would be greatly appreciated,
Regards,
Dan
Edited by: danblackhust on Jul 18, 2010 3:54 AM

Show us the code that threw and caught this exception.

Perl connectivity with remote DB.

Hi All,
We have Oracle 9i RAC, i am working on a testing tool for that i have to connect from remote monitoring machine to Oracle RAC servers, i have installed following packages on monitoring machine i.e.
1. Perl
2. Perl-DBI
3. Oracleinstant client basic package
4. Oracleinstant client sqlplus package
5. Oracleinstant client sdk package
but when I tried to run perl's oracle connecting script i am getting error for missing Perl's DBD::Oracle package, i am confuse whether we need to install this package even when we are trying with instantclient?
PS: even if i try to install DBD::Oracle module on monitoring server, i get error for missing oracle.mk!
please point me to some solution,
TIA
Message was edited by:
nayyares

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by mlightner:
How would I get just the Oracle client? The installation CD that I have only runs in XWindows and it won't even start.<HR></BLOCKQUOTE>
To connect to Oracle via Perl, you simply need these two Perl modules:
1. DBD
2. DBI::Oracle
DBD is a popular Perl module that is used to connect to most databases in existence. You install the DBD module, then you install an accompanying DBI module for the database you are using. These are Perl modules found on CPAN (go to perl.com). On the Oracle side, you need to have sql*net running - that's all.
null

Php connection to remote mysql server

Hi,
I've stragne problem using php 4.3.10 with Sun One 6.1 on Solaris 9. The connection to a remote mysql server fail. I've correct grants in both servers and the php.ini is setting to permit no limit connection to databases. the code:
$host='my-remote-server.com';
$link1=mysql_connect($host,"bla","blabla");
if$db1 = mysql_select_db("LOGIN",$link1);
$link = mysql_connect("localhost","bla","blabla");
$db = mysql_select_db("LOGIN",$link);
The remote connection fail but the local one works. When i work with another server Sun One 6 in Solaris 8 , everthing work wonderfull with the same deffinitions, it can connect the remote databases but the others machines can't connect the solaris 8 machine. i think there is something wrong in the solaris 9 or/and sun one 6.1 deffinition it avoid remote connection. The problem i don't know what may be wrong, which setting may affect tcp connections from web application in solaris 9/sun one 6.1 plataform.

we found the problem finally and may be useful for someone. Using the solaris 9 network snifer (snoop) we found that the default php timeout connection for mysql doesn't work ,this value is 60 in the php.ini . After 4 or 5 miliseconds php application closes the connection when it runs from the webserver , running from the shell it doesn't happen.The answer from the other server arrived after 20 or 30 milisecods then the connection to the databases fails. The solution is to put unlimited tiemout , mysql_connection_timeout=-1 then it success to connect the remote mysql server correctly. May be problem without timeout connection in case the other server doesn't answer, then application may wait forever or untill the system or webserver take out the application. I didn't check this posibilty, mainly i'm interesting the applications can work and write in the remote databases. If this definition cause problem as application waiting connection we always can try with another value greater than 60.

Connection with remote server

i want to connect to the remote server through Swings application. Which techonology should i use?

i want to connect to the remote server through Swings
application. Which techonology should i use?Swing has got nothing to do with remote servers or clients. If the
communication protocol is simple, read all about it in the Socket
and ServerSocket API documentation. Otherwise if possible, read
up about RMI ... or Servlets ... or Midlets, or, or, or ...
kind regards,
Jos

ITunes 8: I can no longer connect to remote speakers via Airport Express

Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility
I get the following error code (-3256) Apple KB research says:
AirTunes: Error -3256 when streaming to multiple AirPort Express units  You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic. http://docs.info.apple.com/article.html?artnum=303157
I followed the KB link, tried KB solution, then I sent this off to Apple.
"Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
My G4 PowerBook running an earlier version of iTunes connects without problem.

I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

Connecting to remote servers

Similar Messages

Maybe you are looking for