CS3 / CS4 connection to remote/testing servers times out.
Hello,
I have 2 questions:
1. Can DreamWeaver be configured to bind once for multiple ldap authentication transactions?
2. Can DreamWeaver be configured to increase it's timeout when connecting to remote/testing servers?
Details below ...
============
Setup
Client: DW CS3/4 clients on WIN XP
Server: Suse Linux 2.6 (SP3)
Protocol: WebDAV via apache 2.2, LDAP authentication
Problem description
Dreamweaver Clients fail to connect to remote/testing servers during peak usage hours.
Analysis
Connecting to the remote/testing servers requires approximately 900 database transactions to test user privileges for content, simplified as the following:
900 x [ bind + lookup + unbind ]
During peak hours, this process can sometimes take upwards of 30 seconds to complete. In these cases, Dreamweaver times out (at approximately 40 seconds) and then user must try the process again.
Possibe Solutions
a) Increase cache size in apache.
This has been done, but we have a large client base, and with 900 look-ups per user, we hit the ceiling of an acceptable cahce size. This solution does not work for us.
b) Change DreamWeaver authentication to only bind once.
Binding 900 times for 900 separate lookups is wasteful. Can DreamWeaver be configured to bind once and have multiple transactions?
[ bind + [ 900 x lookup ] + unbind ]
c) Change DreamWeaver timeout value
Currently DreamWeaver times out on connection attempts at about 30-40 seconds. Can DreamWeaver be configured to timeout at a different value?
============
Thanks!
Graham
Thanks for the super fast response...
Dummy me... It was the firewall on the Oracle host XP box that was the problem
Appreciate the help
Thanks again
Similar Messages
-
Connection to J2EE via ICM times out
We have installed the J2EE 6.40 engine and we are having an issue with
connecting to the J2EE engine via ICM. I have created the cerificate on j2ee and configured the engine to use that certificate. We can connect directly to J2EE without any problems. However, when installing the certifcate in the SSL server pse using transaction strust, the connection times out after 600 seconds as defined by the parmeter.
It appears the connection that ICM does not know how to handle the ssl request to J2EE. We have this implemented for 6.20 and it works.
Appreciate if anyone has seen this and has solutions.Hello,
I have also found the following errors in the dev_webdisp file:
[Thr 1543] *** ERROR => Connection request from (-1/65535/0) to host: hostname.europe.shell.com, service: 8506 failed (NIECONN_REFUSED) [icxxconn_mt.c 2542]
[Thr 1543] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4322]
[Thr 1543] *** ERROR => Connection request from (-1/65535/0) to host: hostname.europe.shell.com, service: 8506 failed (NIECONN_REFUSED) [icxxconn_mt.c 2542]
[Thr 1543] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4322]
[Thr 1543] *** ERROR => Connection request from (-1/65535/0) to host: hostname.europe.shell.com, service: 8506 failed (NIECONN_REFUSED) [icxxconn_mt.c 2542]
FYI we are using functional hostnames on our servers. -
Remote Exception: ConnectException Time Out
Dear All:
My RMI Client Application Code is a Java Servlet, placed under NT, Tomcat and IIS.
Each time I run my Client App I get a Connect Exception: Operation Time Out.
This is the code fragment of my Client Application:
public void service( HttpServletRequest peticion,
HttpServletResponse respuesta )
throws ServletException, IOException
String NumTelefono = peticion.getParameter("num");
String Email = peticion.getParameter("email");
String Mensaje = peticion.getParameter("mensaje");
String Longitud = peticion.getParameter("conta");
respuesta.setContentType("text/html");
PrintWriter out = respuesta.getWriter();
SMS wsms;
try {
wsms=(SMS)Naming.lookup("rmi://gocc2:1099/SMSService");
System.out.println( "Connection Successful" );
wsms.servicio(NumTelefono, Email, Mensaje, Longitud, out);//The program stops in this line
catch ( RemoteException re )
re.printStackTrace(); //and throws this exception
When I'm trying to pass parameters from my RMI Client Servlet to a class implementation which is host in the RMI Server, I get the next Exception (as I explained before):
java.rmi.ConnectException: Connection refused to host: 10.1.38.112; nested exception is:
java.net.ConnectException: Operation timed out: connect
java.net.ConnectException: Operation timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:100)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:25)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:120)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:499)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:190)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:174)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:83)
at SMS_Impl_Stub.servicio(Unknown Source)
at RMISMSCli.service(RMISMSCli.java:43)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:404)
at org.apache.tomcat.core.Handler.service(Handler.java:286)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:797)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:743)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:210)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:498)
at java.lang.Thread.run(Thread.java:484)
Could you help me please to figure out what it means.
Thans
MalenaHi
I 'm also facing the same error here Any one has any explanaition????
Thanks in advance -
Hi guys
Need a pointer..
Am trying to explore the standard functionality of test player timed out if a time out alert is enabled....
But when i try doing this , doesn't seem to be working....
not sure of the following:
does this happen for surveys as well?
any other profile option or any other set up is required for this ?
cheersHi,
Actually IMHO iLearning 5.0 does assessments in a strange way...
This is how it works:
The test timer starts when the user starts the test. (Even if the user leaves the test, the timer still runs.) According to Oracle, this is intended behavior. The 'remaining time' display is only refreshed when the user does refresh the browser or go to a subsequent screen - test section.
So it is possible that the user does not receive an alert concerning the time remaining at all (there is no pop-up or anything, the alert is only the display of the time remaining on top of the screen...)
Once time has expired, the user is locked out of continuing or submitting the test and the status of the test in the database is failed (if I remember correctly. However, I'm sure the test is not submitted automatically on timeout, the system just assumes the score is zero.)
Another strange thing: you can set a test as resumable, but when the user leaves the test - with an intention to return later - the timer does not stop...
The only workaround I see is that you do one question per page (=test section) but it's very tedious work...
This did work differently before iL 4.2... In earlier versions you couldn't make multi-page timed tests, however there was a real-time ticking clock and a pop-up alert as well. On timeout, the test was submitted so the user got a score for it. Oracle says this was changed because lots of customers wanted it to change...
hope this makes things clearer even if we can't really change the way OiL works.. (I currently struggle with the same issue and will possibly build a custom test display engine w. Flash..)
cheers
peter
Edited by: user8007152 on Sep 19, 2008 2:28 PM -
Remote connections in SAP support portal time out
Hello, we are having a problem opening connections to our systems in the support portal and would appreciate any help and direction. This is probably a problem with our SAPRouter or firewall configuration but have been unable to identify where that problem is, and we are working closely with our network folks to try to correct. We are able to download OSS notes through SNOTE and all of the RFC's work correctly but we can't seem to keep a connection open to allow SAP support to login to our systems. The connection appears to open for about three minutes but then gives the error "Host did not respond 1-9 times" then the connection shows cancelled after about 18min. We have had a high priority incident open with SAP for the last couple of weeks but haven't got much response from them. SAP has the IP addresses of our SAPRouter and VPN correct and the routestring is correct.
SAPRouter = 216.253.195.169
VPN = 216.253.195.170
Routestring = /H/colo-sap-router.insummit.com/S/3299
We are able to ping SAP(194.117.106.129) from the saprouter server successfully. A few things I have read indicate that a simple test is that you should be able to telnet to SAP(ip above) on the configured port, 3299 but this we are not able to do and we've told this to SAP, we can telnet to port 21 but not 3299.
SAPRouter is on a Windows 2008 server OS using VPN. Attached is our saprouttab file.
Also attached is a trace.out file, and dev_rout file.
Here are the firewall ACLs:
access-list Outside extended permit ip host 216.253.195.169 host 147.204.100.142
access-list Outside extended permit ip host 147.204.2.5 host 216.253.195.169
access-list Outside extended permit ip host 216.169.212.169 host 147.204.100.142
access-list Outside extended permit ip host 194.117.106.129 any
access-list Outside extended permit ip any host 194.117.106.129
access-list Outside extended permit ip host 194.117.106.128 any
access-list Outside extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
access-list Outside extended permit ip host 194.117.106.128 host 216.253.195.169
access-list Outside extended permit ip 194.117.106.128 255.255.255.252 host 216.253.195.169
access-list Outside extended permit ip host 194.117.106.129 host 216.253.195.169
access-list Outside extended permit ip host 216.169.212.169 194.117.106.128 255.255.255.252
Here are the routes:
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.5.0.1 10.5.0.222 266
10.5.0.0 255.255.255.0 On-link 10.5.0.222 266
10.5.0.222 255.255.255.255 On-link 10.5.0.222 266
10.5.0.255 255.255.255.255 On-link 10.5.0.222 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
194.117.106.128 255.255.255.252 216.253.195.170 216.253.195.169 21
216.253.195.168 255.255.255.248 On-link 216.253.195.169 276
216.253.195.169 255.255.255.255 On-link 216.253.195.169 276
216.253.195.175 255.255.255.255 On-link 216.253.195.169 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.5.0.222 266
224.0.0.0 240.0.0.0 On-link 216.253.195.169 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.5.0.222 266
255.255.255.255 255.255.255.255 On-link 216.253.195.169 276
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
194.117.106.128 255.255.255.252 216.253.195.170 1
0.0.0.0 0.0.0.0 10.5.0.1 Default
And here is the VPN tunnel info:
6 IKE Peer: 194.39.131.167
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
show ipsec sa peer 194.39.131.167
peer address: 194.39.131.167
Crypto map tag: cryptomap1, seq num: 15, local addr: 216.253.195.170
access-list encrypt_123_to_SAP extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
local ident (addr/mask/prot/port): (216.253.195.169/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (194.117.106.128/255.255.255.252/0/0)
current_peer: 194.39.131.167
#pkts encaps: 459156, #pkts encrypt: 459156, #pkts digest: 459156
#pkts decaps: 65825, #pkts decrypt: 65825, #pkts verify: 65825
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 459156, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 216.253.195.170, remote crypto endpt.: 194.39.131.167
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 90CB4EA0
current inbound spi : 769BBB0D
inbound esp sas:
spi: 0x769BBB0D (1989917453)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 20480, crypto-map: cryptomap1
sa timing: remaining key lifetime (kB/sec): (4373965/4063)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x90CB4EA0 (2429243040)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 20480, crypto-map: cryptomap1
sa timing: remaining key lifetime (kB/sec): (4373954/4063)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Again, any help and suggestions is greatly appreciated.
Thanks,
BrentHI Brent ,
I see your problem is critical !!!!
But you can have a net viewer session with SAP .
Its simple and effective way of analysing issue in run time .
SAP SMP Netviewer Instructions DE - YouTube
Netviewer
Please check above Links
Regards,
Abhishek -
CS3 / CS4 connection key issues.
My clients and I both upgraded to CS4 around the same time... it's been a while. Before we all had CS3. Now when I try to put my role as an admin - it corrupts all their connection keys and I then have to remove admin rights and set their connections up manually. Any thoughts on why this happens?
Thank you.Might be due to the Compatability settings. Please refer to http://blogs.adobe.com/contribute/2009/09/compatibilty_transition_mode.html for more information.
-
DW CS3- Cant Connect To Remote Site
Hi
Ive encountered a very fustrating problem.
The new Dreamweaver refuses to connect to any remote sites.
It imported my site list, with FTP info, user names and
passwords...but when I try to connect, I get a big error message
telling me that my info is wrong, or my settings are wrong, or that
the remote server is unplugged, etc etc.
This happens with every site on my list, and it happens when
I try setting up the site info from scratch.
Using the same info, I can connect using Dreamweaver MX 2004,
so I know the basic info is correct.
Does anyone have a guess what's wrong here? Has there been
some fundamental change to site management Im unaware of?
Any help is much appreciated!Send me your connection info offlist, and I'll try to get you
going.
forums at great-web-sights dot com
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yakcat" <[email protected]> wrote in
message
news:f32kcr$ruh$[email protected]..
> Hi
>
> Ive encountered a very fustrating problem.
>
> The new Dreamweaver refuses to connect to any remote
sites.
>
> It imported my site list, with FTP info, user names and
passwords...but
> when I
> try to connect, I get a big error message telling me
that my info is
> wrong, or
> my settings are wrong, or that the remote server is
unplugged, etc etc.
>
> This happens with every site on my list, and it happens
when I try setting
> up
> the site info from scratch.
>
> Using the same info, I can connect using Dreamweaver MX
2004, so I know
> the
> basic info is correct.
>
> Does anyone have a guess what's wrong here? Has there
been some
> fundamental
> change to site management Im unaware of?
>
> Any help is much appreciated!
>
>
> -
The database has been deleted. The problem was the database was not loaded. If you go to Application Settings, there is a selection "allow database to start". Since this was not in use since 4/29, I unchecked this item. If the app does not start, I don't have to worry about using ram resources.
Hi,
That is the path to the source files where configuration manager will copy the content from to the ContentLibrary on the Primary Site server. So in this case the files will be copied twice over the wan once to the SCCM Primary site server and then back
to the DP again.
What you could do is use a prestage package and create that application in configuration manager and then in the console create a prestage package that you can copy and import on the remote DP.
https://technet.microsoft.com/en-us/library/hh692395.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Help Itunes cannot connect to itunes store network time-out
Diagnostics:
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Acer Aspire L3600
iTunes 9.2.1.5
QuickTime 7.6.7
FairPlay 1.8.20
Apple Application Support 1.3.1
iPod-updaterbibliotheek 9.2d4
Cd-stuurprogramma 2.2.0.1
Cd-stuurprogramma-DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device-stuurprogramma 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes-serienummer 510CB457A506EB7D
Huidige gebruiker is een beheerder.
De huidige lokale datum en tijd zijn 2010-08-26 10:05:40.
De veilige modus van iTunes is niet actief.
Door WebKit versnelde samenstelling is ingeschakeld.
HDCP wordt niet ondersteund.
Videoweergave-informatie
Intel Corporation, Intel(R) G33/G31 Express Chipset Family
Intel Corporation, Intel(R) G33/G31 Express Chipset Family
** Informatie over externe plugins **
Er zijn geen externe plugins geïnstalleerd.
** Tests netwerkverbindingen **
Informatie over netwerkadapter
Adapternaam: {2A8F53B8-89AE-48D7-9602-4A39B2468B8A}
Beschrijving: Intel(R) PRO/1000 PL Network Connection
IP-adres: 192.168.1.70
Subnetmasker: 255.255.255.0
Standaardgateway: 192.168.1.254
DHCP ingeschakeld: Ja
DHCP-server: 192.168.1.254
Lease verkregen: Thu Aug 26 08:02:43 2010
Lease vervalt: Fri Aug 27 08:02:43 2010
DNS-servers: 192.168.1.254
192.168.1.254
Adapternaam: {08CC1049-A7AC-4EFF-9D1B-20B0A7AFD73A}
Beschrijving: Atheros AR5007EG Wireless Network Adapter
IP-adres: 0.0.0.0
Subnetmasker: 0.0.0.0
Standaardgateway: 0.0.0.0
DHCP ingeschakeld: Ja
DHCP-server:
Lease verkregen: Thu Jan 01 01:00:00 1970
Lease vervalt: Thu Jan 01 01:00:00 1970
DNS-servers:
Actieve verbinding: LAN-verbinding
Verbonden: Ja
Online: Ja
Gebruikt modem: Nee
Gebruikt LAN: Ja
Gebruikt proxy: Nee
SSL 3.0-ondersteuning: Actief
TLS 1.0-ondersteuning: Actief
Informatie over de firewall
Windows-firewall is ingeschakeld.
iTunes is actief in de Windows-firewall.
Verbinding met Apple website is geslaagd.
Verbinding met iTunes Store is geslaagd.
Beveiligde verbinding met iTunes Store is geslaagd.
Beveiligde verbinding met de iPhone-activatieserver is geslaagd.
Laatste geslaagde toegang tot iTunes Store: 2010-08-26 09:48:14.
** Tests cd/dvd-stations **
Geen stuurprogramma's in LowerFilters.
UpperFilters: NTIDrvr (1.0.0.6), GEARAspiWDM (2.2.0.1),
E: PIONEER DVD-RW DVR-K06RS, Rev 1.06
Station is leeg.
** Tests aangesloten apparaten **
iPodService 9.2.1.5 is actief.
iTunesHelper 9.2.1.5 is actief.
Mobiel Apple apparaat service 3.1.0.0 is actief.
Universal Serial Bus-controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Het apparaat werkt goed.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Het apparaat werkt goed.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Het apparaat werkt goed.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Het apparaat werkt goed.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Het apparaat werkt goed.
FireWire-hostcontrollers (IEEE 1394):
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Het apparaat werkt goed.
Informatie over aangesloten apparaten:
iPhone van Lobke, iPhone 3G gebruikt firmwareversie 4.0.2
Serienummer: 87834A9XY7K
Meest recente momenteel niet aangesloten apparaten:
iPod shuffle (tweede generatie) gebruikt firmwareversie 1.0.2
Serienummer: 4H7243UCVTE
** Synchronisatietests apparaten **
Synchronisatietests geslaagd.We need more information. Error messages? Exact wording of them. What does it do when you try to connect?
Have you also reviewed http://support.apple.com/kb/TS1368 ? -
A website upload works on CS4 on windows 7 machine but times out on Windows 8, help?
Can anyone assist
Glad to hear it is all straightened out. You are right about the upgrade cost. That is one reason why Adobe switched to monthly licensing—no more upgrade cost <g, r, & d>. Of course we do have nearly monthly product upgrades. It is almost like playing whack a mole.
-
Can't connect via remote desktop
Hello,
I'm using a late 2009 iMac running 10.6.8 and an AirPort Extreme 802.11n (4th Generation) running 7.5.2. Before I bought the AEBS, I was able to utilize Microsoft Remote Desktop Connection over a secure VPN network to access my work computer, which runs Windows 7 Professional.
After getting the AEBS, the VPN network still connects perfectly, but the RDC times out every time. If using an RDC client on my iPhone through the VPN over 3G, it still connects, nothing has changed with my work computer.
I'm typing in the work computer's IP address in the RDC client, and I have port forwarding for port 3389 set up in AirPort Utility to my iMac's static IP of 10.0.1.8.
I've read other message boards and have done everything I think I need to do. So what am I missing?
Thanks very much!This is not a solution it is a nasty work around, all of your network traffic including internet access is going to go over your vpn, I don't know about you but just because I have a vpn session and remote desktop running, should not mean that I can't do personal stuff on my local system without it going through my employers servers. How do you get Remote Desktop to route via the VPN connection without turning on "Send all traffic over VPN connection"?
-
Cant submit a new app, iTunes Connect times out
I posted this in another area on the forum but I think I put it in the wrong section so I'm reposting (sorry about the bad etiqute).
Im trying to submit an app for review but everytime I get to the stage where it connects to the iTunes Connect section, I get a time out. Is anyone else experiencing this? Is there any update on when they will be up and running again?
-SNo update on status....no news....no warning....no hope.
iTC is once again living up to it's reputation of being run by clueless summer interns.
We all just have to wait it out...
Ken -
Trying to connect to Web Services but times out. Configuration page suggests no internet connectivity although network modem/router is connected to the internet. Printer prints ok wirelessly through the network.
This question was solved.
View Solution.Let's set a static IP address and external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Telnet cannot connect to Remote Computer
When I telnet my localhost it works completely fine..
But It's not able to connect to Remote Host
It says Unable to Connect to Remote Host, Operation Timed Out
But my Remote Laptop is able to connect to this system perfectly...
I don't understand where's the issue.
Any Help ??Do you mean, you can access the target computer using the other computer and not the
one you’re on right now? Can you ping the target computer using that computer
and vice versa? Just make sure that the computers are pinging each other to
ensure that they are communicating. -
Well I am downgrading (if you can call it that). Leopard and Snow leopard are just superior OS's for power users. All the fancy stuff put in Lion actually slowed it down considerably among all the other bugs..... but anyway
I changed my network password today. My mbp on lion cannot access the network. I deleted the saved names in network preferences, I rebooted my modem an router, even cleared the DNS cache in Terminal. It still tries to connect to the network and times out... without asking me for the new WEP password I have put on the network.
My other laptop on snow leapord does what it is supposed to. Deleted the network name in network preferences, clicked on network name to get online, and then it requested the password name. Why doesn't Lion do this??
Like I said before I did all the above. I don't know what else to do. I also manually deleted the keychain passwords. Still no luck. I guess I have to rename my network lol.Access the router's admin area and put in a new password.
Maybe you are looking for
-
Upload data from Excel to Internal table in ECC
Hello SDN, Here I am facing a problem for uploading the data from excel sheet to internal table in ECC6.0 Main problem is we don't have any FM ALSM_EXCEL_TO_INTERNAL_TABLE. Please provide me the solution how to upload the data from excel to internal
-
Cannot install SP1 on Windows 2008 R2 64bit 0x800f0826
Hello, I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2. I tryed install the SP1 in a workgroup machine and the results were successful. But when I'm trying to install in my Domain it doesn't work, I think that s
-
Hi friends, I am doing a BDC for F-03 and everything is working fine except when the the BDC is executed at background mode i.e N. It is working good at A and E but it gives a custom validation error at background processing. I am searching SDN since
-
how u used logical database?how is data transferrd to program?corresponding statement in LDB?
-
Hi, Project IDoc is triggered from SAP system, when project status is REL(Release). Project IDoc, does not have information about if it is a new project or an existing changed project. Any idea how i can deal with this problem? Can i use ABAP table