Connecting two Entity Instances with global Entity and amongst themselves

Hi,
Is there a way of storing in the relationship between two instances of the same entity?.
For instance, there is an entity called : the household member(hhm)
and a global entity called the central character(cc).
Let the hhm be: A, B, C
and the cc: D
Is there a way of asking for and storing the relationships that A shares with B and C, and that shared between B and C?. And the one shared by al of them with D?
Please let me know if the case is not clear and any further clarity is needed.

Hi Davin,
Appreciate the prompt reply.
By "the relationships that A shares with B and C", I meant to find a way of capturing the relationship that different members of a household may share.
Lets assume that the form is being filled by one of the household members, now I am looking for a way to capture the relationship that the form-filler shares with other household members+ the relationship that these household members share with each other.
I hope i have cleared your doubt to a certain extent. Please let me know if you have any other misgivings.
Lokesh

Similar Messages

  • Two Coherence instances with same JVM

    Hi all,
    I have a special case need your advice.
    we have an architecture platform build on top coherence to support some system data (session persistence data...etc).
    and we are building applications on top the platform, the applications also need coehrence to support Application distributed data.
    which is the best practice:
    - Load two coherence instances with two separate configs
    - share same instance with same config file
    to isolate clear two parts, we prefer first solution, but we don't know which is drawback for this solution.
    Best regards.
    Jerome

    Hi John,
    I beg to differ: all you need to do is ensure that Coherence is loaded by two independent class loaders and not from a common parent class loader.
    Of course, you can't reuse the same ports so you can't rely on the default Java properties for overrides, but you can use the operational configuration descriptor override feature to specify different settings for things like cluster address, and similar.
    Best regards,
    Robert

  • Connecting two Nexus switches with link

    Hi,
    I would like to connect two nexus switches with a link. Like one c5020 and one c5548p. How do i need to configure the ports at both the switches which will be joined with a fiber cable.
    For MDS switches such links becomes E-port and fabric is merged. Not sure what happenes at the Nexus swictches. Any input will be appreciated.
    Thanks,

    Do you have fc modules in each nexus? If so, they act much like the MDS 9148. All ports should be default auto speed and auto switchport mode. Insert fc-sfp's and a regular multimode fc cable between them. Default mode is fc switch.
    If that doesn't work, configure the mode on each port as E.
    Once done, the fc switch portion of each nexus will merge.
    Dave

  • Connecting two Nexus 5020 with 10G ISL link

    Hi Experts,
    I am trying to connect two nexus 5020 with a 10G ISL link.
    Per my understanding, with new release 5.0.3 N2(2a) ISL link between two nexus switch is supported.
    Following is my config
    c5020-1(config)# show running-config int vfc 32
    !Command: show running-config interface vfc32
    !Time: Fri Dec  2 01:14:38 2011
    version 5.0(3)N2(2a)
    interface vfc32
      bind interface Ethernet1/32
      switchport mode E
      switchport trunk allowed vsan 3040
      no shutdown
    c5020-1(config)#
    c5020-1(config)# sho running-config int eth1/32
    !Command: show running-config interface Ethernet1/32
    !Time: Fri Dec  2 01:16:15 2011
    version 5.0(3)N2(2a)
    interface Ethernet1/32
      switchport mode trunk
      spanning-tree port type edge trunk
    c5020-1(config)#
    I have similar config on the other switch. But for some reason the link does not come up. vfc port keep "initializing" and Eth port stays isolated.
    c5020-1(config)# sh int vfc32
    vfc32 is trunking (Not all VSANs UP on the trunk)
        Bound interface is Ethernet1/32
        Hardware is Virtual Fibre Channel
        Port WWN is 20:1f:00:0d:ec:ca:04:bf
        Admin port mode is E, trunk mode is on
        snmp link state traps are enabled
        Port mode is TE
        Port vsan is 3040
        Trunk vsans (admin allowed and active) (3040)
        Trunk vsans (up)                       ()
        Trunk vsans (isolated)                 ()
        Trunk vsans (initializing)             (3040)
        1 minute input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
        1 minute output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
          0 frames input, 0 bytes
            0 discards, 0 errors
          0 frames output, 0 bytes
            0 discards, 0 errors
        last clearing of "show interface" counters never
        Interface last changed at Fri Dec  2 01:17:28 2011
    c5020-1(config)#
    c5020-1(config)# sh int eth1/32 fcoe
    Ethernet1/32 is FCoE Isolated
    c5020-1(config)#
    If any expert throw some light to make me understand things better will be helpful.

    i have not connected two Nexus before but looking at your eth 1/32 interfaces ..do you think it needs to be "
    switchport trunk allowed vlan" your "FCOE" VLAN ?

  • I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

    I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • Can I connect two apple tv on same network and same apple ID at a time ?

    Can I connect two apple tv on same network and same apple ID at a time ?

    Welcome to the  Discussion Forums.
    Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out why they aren't showing up.

    I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out how to get itunes to recognize the photos on my phone. This has never happened before.

    Have you tried to reset the iPhone and tried again to import?
    To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

  • I cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode

    i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    And if necessary
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights fl

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

  • Is possible to connect two i-phone4 with bluetooth?

    Is possible to connect two i-phone4 with bluetooth?

    For what reason.  Some apps were made to interact with another iPhone with the same app running over bluetooth.
    All info is in the manual if you mean for other reasons.
    http://manuals.apple.com

  • I have published two different blogs with different usernames and passwords

    I have published two different blogs with different usernames and passwords. When I want to publish one, it goes through the whole process of publishing the other blog as well - and takes too long.
    How can I publish each blog separately?

    I have published two different blogs
    I think you need to ask in the iWeb forum rather than this one (for iWork/Numbers):
    http://discussions.apple.com/forum.jspa?forumID=1309

  • Connecting two Acer monitors with VGA and DVI output to my Macbook Pro (mid 2010)

    Hi All,
    I need to connect 2 Acer monitors that have both VGA and DVI ports to my MacBook Pro.  What's the best way to do that?
    Thanks for your help!

    hey! Thats normal for notebook! That actually happens to almost all of us - as there are a small fraction of people with two and more thunderbolt displays or with newest rMBP and external multi-monitor setup.

  • Unable to create Instance with Object Editor and Attachment Pattern

    Hi Experts,
    I created a simple entity service with some attributes and a document reference.
    I also configured an object editor pattern and assigned a attachment pattern. The created object editor works as long as I don't attach a file. But if I attach a file and want to save it I get an error message "cannot create"
    In the default log.trc I have some entries
    Cannot read associated instance with MOF ID 105D8E0C4F02D45AFFD5B9D6A09EFB7A of MOF Layer 2 for (6DC24B80F6004CDBF4FA6C560AEDD33C,<null>)
    and
    refPackageM1(com.sap.ip.bi.sdk.dac.olap.query) failed RepositoryDBMemory. Using generic one.
    I configured the j2ee engine according the tutorial "Integrating KM with CAF UI Patterns"
    So what is wrong?
    Best regards Manuel

    Hi,
    From the stacktrace I assume that the following happens (please correct me, if I'm wrong):
    <b>*</b> Some time based event mechanism sends an event to your custom event handler code. That code is execute in some system context.
    <b>*</b> Your handler uses the RF API to create a collection. All this is perfectly OK. Here my assumptions end, the next steps are solid facts.
    <b>*</b> Within the RF all property filters are informed that a resource is about to be created. One of the filters is trying to obtain a lock from a system provided Locking Service.
    <b>*</b> That service refuses to grant the lock, telling that system users are not allowed to do so.
    Most proably you cannot do anything to solve this problem by yourself. When I ran into the same Exception once, I could avoid to have my code run in a system thread. Well you might try to do the same.
    Otherwise please open a customer message and complain about the restiction in the locking behaviour.
    Best regards,
    Michael

  • Two HTMLDB instances with single Database

    please tell me what if I just want to configure and connect an additional apache server to my existing Database. SO that i can get another way for connecting to same databse. ( Mirroring). If this is feasible then please tell me how to configure the apache server. I have tried to configure dad but i think i am not doing it the right way.I am on Oracle 10g with applications made in HTMLDB, I tried to use the dad file for making the connection. During the installation the error message states that " FLOWS_010500 user already exists if you want to continue the installation, please drop the user or specify a different database and try again.. Can any one tell me how can i connect to the Databse with another instance of HTMLDB.
    Thank you.

    Hi,
    Issue Clerifications
    1. You have one DB Node and you want install two htmldb application nodes.
    2. Which apache servers running on that DB Node.
    3. Which listiner ports are there on that DB Node.
    4. Are you try to install HTMLDB, What error messages are you facing.
    Regards,
    Upendran .A
    DBA Team

Maybe you are looking for