Connection errors when configuring OBIEE to access data in MS Analysis Cube

Hi,
I also have a requirement of making reports in OBIEE using MSAS 2005 Olap Cube as a source.
I have installed SQL Server 2005 with analysis services on Windows Server 2003 Enterprise Edition (Service Pack 1).
I have applied SQL Server 2005 Patch (SQLServer2005SP2-KB921896-x86-ENU.exe).
The customer has sent me a database dump and a Cube dump.
I have restored the database and Cube in the database and analysis server.
I am able to see the cube through the management studio.
Now I have to make reports in OBIEE with the MSAS Cube as a source.
For this I configured Virtual directory using the link:
http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx
Then when I try to import the cube from OBIEE RPD by giving the URL
http://10.176.230.227/olap/msmdpump.dll
I get the following error :
nQSError: 46100 Sax parser failed with error an exception occurred Type NetAccessorException Message Could not connect to the socket for URL http://www.w3.org/TR/html4/strict.dtd
I have everything installed on a single system (Sql Server,IIS,OBIEE 10.1.3.4 ).
Regards,
Krishna

Before trying to use this URL in OBIEE to import cubes, try this in Internet Explorer.
Follow the following steps:
a. Run this URL in Internet Explorer
b. You should get an output like this:
+
- <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <soap:Body>
- <soap:Fault xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>XMLAnalysisError.0xc10e0002</faultcode>
<faultstring>Parser: The syntax for 'GET' is incorrect.</faultstring>
- <detail>
<Error ErrorCode="3238920194" Description="Parser: The syntax for 'GET' is incorrect." Source="Unknown" HelpFile="" />
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
+
c. If yes, this proves that the virtual directory in IIS has been configured properly. If you get any other message, for example "Page cannot be displayed" or "Page not found", it means there are some issues with Virtual directory.
Try this and let me know the results...and then we can proceed further

Similar Messages

  • SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from De

    Hi SAP Guru,
    We have configured ADOBE for separate ABAP server and Java Server.
    But when I am execution report FP_TEST_00 getting below error
    ADS: com.adobe.ProcessingException: Problem accessing d(200101) Message no. FPRUNX001
    FP_CHECK_DESTINATION_SERVICE
    FP_CHECK_HTTP_DATA_TRANSFER giving error
    SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_IP1//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
    But report fp_pdf_test_00 is giving postive response.
    I have troubles hooted according to note 944221 , my configuration is ok but no success.
    Please help to resolve this issue.

    Hi,
    Check your ADS Connection .
    Do one thing
    Go to T-code "SM59"  -  "RFC Destinations (Display/Maintain)"
    select "HTTP Connections to External Server" - > ADS
    Double click there and check the all the settings " Administrations "  ,  Technical setting , Logon and security , Special option .
    Please check the log on and pass word with the help of your SAP BASIS consultant it will work fine .

  • App File Server connection error when trying to run a BI Publisher report..

    hello Gurus...
    As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
    What does our DBA need to do..?
    error message reads..
    Template code: SUARXASR
    Template app:  AR
    Language:      en
    Territory:     GB
    Output type:   EXCEL
    [5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
    oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
    at  oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
    many thanks for looking..
    Steven

    nobody experienced this before..?

  • Error when converting time stamp in date time time zone CST  in IC

    Hi Experts,
    We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
    so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
    we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
    So please advice how to resolve this issue.
    Regards,
    Teja

    Hi Teja,
    I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
    Regards,
    Simon.

  • Error when configuring Siebel Server in Windows server 2003

    Hi
    I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
    2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
    GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

    Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
    Hope it helps,
    Wilson

  • Error when I try to access my yahoo mailbox

    I am using JavaMail for accesing my yahoo mailbox.
    I get the following error when I try to access my mailbox
    Exception :: javax.mail.AuthenticationFailedException: Error logging in.
    Session session = Session.getInstance(properties,new Authenticator()
                                  public PasswordAuthentication getPasswordAuthentication()
                                       String username = getUser();
                                       String password = getPassword();
                                       return new PasswordAuthentication(username,password);
    Store store = session.getStore("pop3");
    store.connect(getPopHost(),user,password);
    please any one help me.
    i thinked error problem in
    Store store = session.getStore("pop3");
    store.connect(getPopHost(),user,password);
    any of this lines.
    please tell ur sugestions.
    thanks in advance.

    try it.
    public class SendMailUsingAuthentication
      private static final String SMTP_HOST_NAME = "myserver.smtphost.com";
      private static final String SMTP_AUTH_USER = "myusername";
      private static final String SMTP_AUTH_PWD  = "mypwd";
      private static final String emailMsgTxt      = "a message.";
      private static final String emailSubjectTxt  = "a subject";
      private static final String emailFromAddress = "[email protected]";
      // Add List of Email address to who email needs to be sent to
      private static final String[] emailList = {"[email protected]", "[email protected]"};
      public static void main(String args[]) throws Exception
        SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
        smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
        System.out.println("Sucessfully Sent mail to All Users");
      public void postMail( String recipients[ ], String subject,
                                String message , String from) throws MessagingException
        boolean debug = false;
         //Set the host smtp address
         Properties props = new Properties();
         props.put("mail.smtp.host", SMTP_HOST_NAME);
         props.put("mail.smtp.auth", "true");
        Authenticator auth = new SMTPAuthenticator();
        Session session = Session.getDefaultInstance(props, auth);
        session.setDebug(debug);
        // create a message
        Message msg = new MimeMessage(session);
        // set the from and to address
        InternetAddress addressFrom = new InternetAddress(from);
        msg.setFrom(addressFrom);
        InternetAddress[] addressTo = new InternetAddress[recipients.length];
        for (int i = 0; i < recipients.length; i++)
            addressTo[i] = new InternetAddress(recipients);
    msg.setRecipients(Message.RecipientType.TO, addressTo);
    // Setting the Subject and Content Type
    msg.setSubject(subject);
    msg.setContent(message, "text/plain");
    Transport.send(msg);
    * SimpleAuthenticator is used to do simple authentication
    * when the SMTP server requires it.
    private class SMTPAuthenticator extends javax.mail.Authenticator
    public PasswordAuthentication getPasswordAuthentication()
    String username = SMTP_AUTH_USER;
    String password = SMTP_AUTH_PWD;
    return new PasswordAuthentication(username, password);

  • 'No such host is known' error when configuring Reporting database

    Hi,
    We are joining two report server databases using reporting services config manager. The problem is when we are trying to connect database on another machine we are receiving following error at step 'generating Rights script'
    System.Net.Sockets.SocketException: No such host is known
       at System.Net.Dns.GetAddrInfo(String name)
       at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
       at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
       at ReportServicesConfigUI.RSDatabase.IsLocalDbServer(String dbServer)
       at ReportServicesConfigUI.RSDatabase.GrantRSConnectionRights()
       at ReportServicesConfigUI.RSDatabase.CreateNewDatabase()
    As per step mentioned in following link,
    http://blogs.msdn.com/b/sameersurve/archive/2009/06/15/no-such-host-is-known-error-when-configuring-ssrs-2008.aspx
    We tried opening port 1434 for the Reportserver db machine. but it didnt worked for me.
    Following are points i feel could be the reason of failure,
    1. The two machine we are working on are in different domains.
    2. The Product version of the two reporting servers are different.
    Have anyone experienced this if yes any solution that i can try? 

    Hi Shrikant_k,
    If we are using a remote database server for the report server database, we should refer to the following tips:
    Enable remote connections. And we should also open your firewall software and open the port that SQL Server listens on. For the default instance, this is typically port 1433 for TCP/IP connections. To verify that the instance accepts remote connections,
    please refer to the following article:
    http://technet.microsoft.com/en-us/library/ms157300(v=sql.105).aspx
    When you enable remote connections, the client and server protocols will also be enabled. To verify the protocols are enabled, please see:
    http://technet.microsoft.com/en-us/library/ms191294(v=sql.105).aspx
    When the database server is in a different domain or we are using workgroup security, we must configure the connection to use a SQL Server database login. In this way, we must update the report server database connection every time we change the password
    or the account.
    When creating a report server database, be aware that not all editions of SQL Server can be used to host the database. The following document is for your reference:
    http://technet.microsoft.com/en-us/library/ms157285(v=sql.105).aspx
    Reference:
    Configuring a Report Server Database Connection
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • HT5622 I have a connection error when I try to sign on to icloud, what is wrong?

    I have a connection error when I try to sign on to icloud, what is wrong?  My phone is stolen and I'm trying to track it.  Icloud was working fine earlier today. Help anybody please!

    If you are getting this error when trying to use icloud.com on a computer, follow these steps.

  • I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

    I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

    I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

  • My ipad says it has an internet connection but when i try to access safari it says it is unable to as there is no internet connection, help!

    My ipad says it has an internet connection but when i try to access safari it says it is unable to as there is no internet connection, help!

    Tap Settings / General / Reset / Reset Network Settings.
    Restart your IPad. Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If that doesn't help, try here >   Apple - Support - iPad - Wi-Fi

  • Iphone 6 lost connection error when PC READS the phone since iTunes update. t

    Lost connection error when trying to sync iphone 6 since iTunes update. Has anyone else had this issue its VERY FRUSTRATING, when the PC reads the phone?
    Message was edited by: marcityme

    Get a replacement nanoSIM from Rogers and see if this helps.

  • I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

    I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

    "You can add the PATH enviromental variable in Control Panel> System> Advanced System Settings.
    Alternatively, I was successful just copying the QTMovieWin.dll from c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
    See in: https://discussions.apple.com/thread/5252205?start=15&tstart=0

  • Connection Timed Out error when I try to access Alert Inbox

    Hi experts,
    I have not been looking at my alert inbox for a while and I suspect it's very full.
    When I tried to open the alert inbox from RWB, I encountered the following error:
    <b>500 Connection timed out
    Error: -5
    Version: 7000
    Component: ICM
    Date/Time: Mon May 07 11:08:51 2007 
    Module: icxxthr.c
    Line: 2646
    Server: ootspdbs02_PI1_01
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    </b>
    All other functions of the RWB is working fine, including Alert Configurations.
    I tried restarting the J2EE instance, but it did not help.
    I've checked the SICF services, and they are fine.
    I suspect the alert inbox is trying to load a huge amount of data, so it is timing out.
    How can I adjust the keep_alive_timeout setting in this case?
    When I look into RZ11, I am unable to edit this entry.
    Please help.
    Thanks.
    Ron

    Hi Ron,
    Follow these steps:
    1. Try restarting the JAVA Stack.
    2. ST22 check out any Dump.
    3. In RWB --> Component Monotring --> check the Cache connectivity test...is all are Green ( Glowing )
    Check these SAP Notes 750287,900896,768456
    If that doesnt work out, check this SAP Note 840849
    Regards,
    Prateek

  • Re: Error when configuring Data Masking with workload masking in 12c

    Hello,
    Even I am facing a similar issue - error message displayed when trying for data-masking along with R.A.T. capabilities
    Can anybody help resolve this.
    Objective - Use Real Application Testing in combination with Test Data Masking Pack
    Current Setup
    I have a VM Box with Windows 2008 R2 Server OS Image
    Enterprise Manager 12c and Oracle 11g Database Instance Installed and configured on the same host.
    Have added one more Oracle Database Instance 11g Database instance into the Target Databases.
    while doing data masking, when i select the checkbox Ensure Workload Masking Compatibility i always get the error:
    "Workload masking is not supported by the target database chosen. You may need to apply a patch or move to a newer version of the database for workload masking."
    Can you please guide as to which patches / configurations need to added. I believe the Patches and Provisioning Wizard within EM will help on installing the requiredd patches.
    But I am not aware of which patch it is referring to.
    highly appreciate your help n guidance in this regards.
    Regards,
    Nayan Tejani
    +91 98333 02666

    Gosh! at last i found the solution!!
    I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
    Problem faced:
    Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
    Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
    Possible Solution:
    1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
    2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
    3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
    4) Restart webadmin (step 3 & 4 can perform in VA too)
    5) set gw/keepalive &  gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
    5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
    > This is the main solution to solve intermittent failed RFC for extractor.
    Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
    Thanks!
    Nicholas Chang,

  • TCP connection error when sending MODBUS commands to WAGO 750-881 controller after 113655 bytes of data have been sent

    Hi all,
    I am new to the world of labview and am attempting to build a VI which sends commands to a 750-881 WAGO controller at periodic intervals of 10ms. 
    To set each of the DO's of the WAGO at once I therefore attempt to send the Modbus fc15 command every 10ms using the standard Labview TCP write module. 
    When I run the VI it works for about a minute before I recieve an Error 56 message telling me the TCP connection has timed out. Thinking this strange, I decided to record the number of bytes sent via the TCP connection whilst running the program. In doing so I noticed that the connection broke after exactly 113655 Bytes of data had been sent each time. 
    Thinking that I may have been sending too many messages I increased the While-loop delay from 10ms to 20, 100 and 200 ms but the error remained. I also tried playing with the TCP connection timeout and the TCP write timeout but neither of these had any effect on the problem. 
    I cannot see why this error is occuring, as the program works perfectly up untill the 113655 Bytes mark. 
    I have attached a screenshot of the basic VI (simply showing a MODBUS command being sent every second) and of a more advanced VI (where I am able to control each DO of the WAGO manually by setting a frequency at which the DO should switch between ON and OFF). 
    If anybody has any ideas on where the problems lie, or what I could do to further debug the program this would be greatly appreciated. 
    Solved!
    Go to Solution.
    Attachments:
    Basic_VI.png ‏84 KB
    Expanded_VI.png ‏89 KB

    AvdLinden wrote:
    Hi ThiCop,
    Yes the error occurs after exactly 113655 bytes every time. The timeout control I would like to use is 10ms, however even increasing this to 1s or 10s does not remove the error, which leads me to believe that this is not the issue (furthermore, not adding any delay to the while loop, thus letting it run at maximum speed, has shown that the TCP connection is able to send all 113655 bytes in under 3 seconds again pointing towards the timeout control not being the issue here). 
    I attempted Marco's suggestion but an having difficulty translating the string returned into a readable string, (rightnow the response given is "      -#   +   ").
    As to your second suggestion, I implemented something similar where I created a sub VI to build a TCP connection, send a message and then close the connection. I now build each message and then send the string to this subVI which successfully sends the command to my application. Whilst not being the most elegant method of solving the issue, it has resolved the timeout problem meaning I am able to send as many commands as I want. So in that sense the problem has been solved. 
    If you still have tips on how to correctly read the TCP read output, I would however like to see if I could not get my first program to work as it is slightly more robust in terms of timing. 
    Modbus TCP RTU is a binary protocol, as you show in your Basic VI, where you format the data stream using byte values. So you have to interprete the returned answer accordingly with the Modbus RTU spec in hand. Now what is most likely happening is that the connection gets hung after a while since you do NOT read the data the device sends as response to your commands. The TCP/IP stack buffers those bytes and at some point the internal buffers overflow and the connection is blocked by the stack. So adding the TCP Read at strategic places (usually after each write) is the proper solution for this. Is there any reason that you didn't use the NI provided Modbus TCP library?
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

Maybe you are looking for