Connection für 6.1 (7.1) Recievers? (self answered now
I read a dozen of topics, and then more i read, then less i know.
First off all I switched to a new mainboard, and left behind my good old nVidia soundstorm. I connected my PC with my Denon 380 receiver with one simple cinch-chinch cable, and had sound on all 7 speakers ( Front-Left/right, center, rear-left/right, back, sub ).
Now I bought a Soundblaster x-fi in hope of unbeli'veable sound experience.
I connected all three 3,5jack to 2xcinch to my receiver, an 5. sound is no problem at all. But how do I get sound to my back-speaker?
Manual says connector 2 and 3 are for three channels, do I have to split one 3,5jack into three chinch? Are they mixed soundchannels and not discrete?
My receiver has external input for Front-Left*/right*, center*, Rear-left*/right*, Back-left/right and Sub* ( * marks connected and working ).
So I hope for some help and pray that the answer is not "not possible".
Oli'verMessage Edited by oleister on 2-8-2005 :29 PM
oleister wrote:
Self answer:
Found at ( sorry german )
[url="http://www.hifi-forum.de/index.php?action=browseT&forum_id=42&thread=45]Hifi-Forum.de[/url]
[quote][size="-2">
Besitzt man ein 6. oder 7. Recei'ver, wird man sich nat?rlich wundern, wie man nun den 7ten Kanal rausbekommt, um 6. zu nutzen. Hier hat Creative sich etwas einfallen lassen. Man ben?tigt ein Kabel, was von 3,5mm Klinke (4 Polig) auf 3x Cinch geht. Der Ausgang f?r Center+Sub gibt mit einem normalen 3-Poligen Miniklinkekabel nur 2-Kan?le aus, f?r Center+Sub. Schlie?t man nun das das Kabel an, was einen 4 Poligen Miniklinkestecker besitzt, ?bertr?gt die Karte ?ber dies Center+Sub+Back Center. So bekommt man dann den 7ten Kanal. Der 4. Pol ist ?brigens f?r die Erdung.
Dieses Kabel kann man bei Creative bestellen, f?r 0EUR inkl. Versand. Es ist allerdings eine Kreditkarte von n?ten (Das Kabel wird auch mit dem 7700-Boxensystem ausgeliefert). Eine andere M?glichkeit ist, sich das Kabel woanders zu suchen (Bei Hifi-Regler gibt es eines von HAMA, allerdings f?r ca. 4,50EUR + Porto und Versand. Oder man kauft sich den 4-Poligen 3,5mm Klinkestecker z.B. HIER und l?tet sich das Kabel entsprechend zusammen.[/quote]
you need in fact a special 3.5 jack
[img"]http://www.reichelt.de/bilder/web/C60/KSK4G-35.jpg">
Thank you to creative for keeping your customers informed by manual. *sick*Message Edited by oleister on 2-8-2005 :3 PMMessage Edited by oleister on 2-8-2005 :3 PM
Where do you find this jack?
I'm looking for a high quality 4 poles jack to get 7., and the one in the picture seem to be of excellent quality.
Thanks.
Similar Messages
-
I recently aquired a new iphone 4s because my old one broke. I backed it up on my itunes but now it wont give me the option of using the phone, it just says connect to itunes. I have synced it several times now and dont know what to do, please help me!!
I recently created a new apple ID
Bad idea.
Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content. -
I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my housActually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice. -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
I just bought a new macbook, and am trying to transfer data from my old imac. I have connected the two with a firewire, and how do I now transfer the data?
Thanks in advance.
JoelYou can connect them in Target Mode http://support.apple.com/kb/HT1661 and then drag and drop from the iMac to the MacBook.
-
I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.
Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG -
I connected my iphone 4 to itunes and it automatically updated, now I am connected to icloud and all my pics are gone. Also, I have all my sons contacts on my phohe. How do I get my content back to the prior state?
Hey kaylactm,
Thanks for the question. I understand how frustrating this may be. To resolve your issue, it may be necessary to restore your device in recovery-mode:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!
http://support.apple.com/kb/ht1212
-
I had my macbook connected to 2 monitors and i accidently choose 0 monitors now I have a blank screen what do I do?
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
I had connected my yahoo email account with my apple email and now wish to disconnect this link. How do I do this?
Open Mail preferences and delete the account. This only removes it from the Mail app and doesn't close out the service.
-
When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?
Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
Help would be much appreciated!If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one. -
Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck -
Hello I recently downloaded an app on my iphone 4s - Remote mouse- so i can control my laptop that is connected to my tv, it used to work fine and now the connection fails, I downloaded another app and the same problem occurs, its not the firewall and both phone and laptop are conected to the same wifi, i also tried to connect it manually with the ip address and still no connection, can you help??
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Then reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss) Try it again. -
Hi all,
i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let them go.
if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore.
Maybe you are looking for
-
IOS SSL VPN application issues
Hi, I have setup WEBVPN with the SSL client on a Cisco 2811. The WebVPN gateway is via a loopback address on the router, so I NAT port 443 to this address as it enters the ADSL interface. Everything works great apart from when I try to access an inte
-
How do I DELETE AN EMAILS ADDRESS FROM MY ITUNES ACCOUNT
How can i delete an additional email address that is linked to my apple id?
-
When I have tried to download iTunes to my computer, it tries to save it to an invalid E Drive. I want it saved to my C Drive; how can I change that, it doesn't seem like it gives me the option.
-
30gb video ipod need help putting videos on it!!!
yea i just got a 30gb video ipod for my b-day and i have home videos that i want on the ipod but i dont know how...can yea guys help me out????
-
Idoc structure after upgrading
Hi, I would like to know whether the standard idoc segment structure changes after upgrade. We are upgrading from 4.7 to ECC 6.0 . Will any idoc, errors due to upgrade (because of structure changes or something like that). Anything needs to be taken