Connection issues between 64 bit SSIS and Oracle in 64bit

I've got a Win2K3 Std Ed server (x64) running 64-bit SQL Server 2005 Enterprise Edition. I've installed the Oracle 10g 64 bit and and installed ODAC 64 bit then oracle patch to take care of () issue, i managed to create a link server on management studio and connect to oracle a 64 bit server
Now... when I try to create a new connection manager in SQL Server 2005 Integration Services i got the following error, the OLEDB provider for Oracle can't be found, and when I try to manually add an underlying OLEDB connection to the database, SQL Server reports: i got the following error....
Test connection failed because of an error in initializing provider. The 'OraOLEDB.Oracle.1' provider is not registered on the local machine.
Note: my sql server agent is not running on this server, let me know if this is an issue.

I think I resolved this issue by installing Oracle 11g 32bit & 64bit clients in the 64bit SQL Server machine.
Please refer to the detail:
http://knol.google.com/k/jeyong-park/accessing-oracle-data-source-from-64bit/3vywlm4f31xae/12#

Similar Messages

Connectivity issues between Cisco 2901 and Cisco SG300-52

Hello,
I am having some serious connectivity issues between the hosts in my LAN.
My LAN is based on a Cisco 2901 router and a Cisco SG300-52 port switch.
The issue that has been happening is that connections between hosts on the LAN (remote desktop, extended ping, etc) is very unstable, at some point I can see a 35% lost packets on an extended ping. This happens at any time of the day and from any host.
All hosts are on the same Vlan(default Vlan) and on the same subnet. Some hosts have fixed IP addresses (servers and network equipment) and others obtain their IP address trough a DHCP reservation established on the router (reserved with the MAC address of every host).
I can provide further details if needed, because this issue is very serious and I would really appreciate any insight or support.
Many thanks in advanced.
Sair Amer
EDIT: After doing every test we could think of, we finally found the reason behind this problem.
It turns out that the switch has problems handling communications between clients at different speeds, because most of the hosts connected were working at 100 Mbps but the servers were working at 1000 Mbps (and the communication between host and servers wasn't stable).
After manually setting the speed on all ports to 100 Mbps the problems have stopped.
Many thanks for you help on this issue.

Building configuration...
Current configuration : 4123 bytes
! Last configuration change at 12:06:16 PCTime Sat Jul 19 2014 by ccp
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Foninsa
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 $1$BDbJ$HN3VP8nmywrGB55RCxPd30
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone PCTime -4 0
clock summer-time PCTime date Apr 6 2003 2:00 Oct 12 2003 12:00
no ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.151 192.168.1.255
ip dhcp pool FONINSA
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8 8.8.4.4
ip dhcp pool Laptop-Sporta-Wifi
host 192.168.1.10 255.255.255.0
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-213585710
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-213585710
revocation-check none
rsakeypair TP-self-signed-213585710
crypto pki certificate chain TP-self-signed-213585710
certificate self-signed 01
30820229 30820192
quit
license udi pid CISCO2901/K9 sn
license boot module c2900 technology-package securityk9
username ccp privilege 15 password
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 190.196.21.98 255.255.255.248
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip nat inside source static tcp 192.168.1.3 21 190.196.21.98 21 extendable
ip nat inside source static tcp 192.168.1.3 80 190.196.21.98 80 extendable
ip nat inside source static udp 192.168.1.8 1194 190.196.21.98 1194 extendable
ip nat inside source static tcp 192.168.1.4 3389 190.196.21.98 3389 extendable
ip nat inside source static tcp 192.168.1.9 3389 190.196.21.98 10000 extendable
ip nat inside source static tcp 192.168.1.3 3389 190.196.21.98 20000 extendable
ip route 0.0.0.0 0.0.0.0 190.196.21.97
access-list 1 permit 192.168.1.0 0.0.0.255
control-plane
line con 0
password $
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 5
access-class 23 in
privilege level 15
password #
transport input telnet ssh
no scheduler allocate
end

Connectivity Issue Between MacBook Pro and Mac Mini

I have a MacBook Pro and a Mac Mini both with Yosemite 10.10.2, I've never had any issues with them sharing a connection when I was home, (I've never been able to connect outside of my home network) but I use the Mini to backup my MacBook Pro, but has of February 11th my MacBook Pro doesn't see my Mac Mini no matter what I do. I can share the screen from the Mini to the Book Pro but I can't remotely access the Mini from the MacBook Pro. I've turned off Back to My Mac on both Macs and removed it from my Airport Extreme and re-entered all of the information. I signed out of iCloud on both Macs and signed back in. I haven't changed any settings at all before I lost the connection, I am not sure how to resolve this issue.

Hey there GRivera210,
It sounds like you are having issues with using Back to my Mac. I would recommend using the troubleshooting outlined in the following article to help resolve the issue. It also has a contact for the iCloud support team if it doesnt resolve it:
If you have issues using Back to My Mac
Thank you for using Apple Support Communities.
Take care,
Sterling

HT201398 Innhave a connectivity issue between my iPad now using iOS8.3 and my Dual 150 external GPS.There was no issue before I updated to iOS8.3

Updating to iOS 8.3 has caused a connectivity issue between my iPad and my Dual150 external GPS. Can I revert to a previous version of iOS?

The only way to get this working again is to downgrade to 8.2
Seems Apple does not have this on a high priority list and am not willing to buy something that works for a lot of money. The flying community who uses this for navigation is having a lot of problems with this issue. The position awareness is compromised. Hope they fix this quickly

Connection issue between Cisco 515 Pix and Cisco 1841 router

Hi,
I am having a problem getting a Cisco Pix 515 communicating to a Cisco 1841. I am currently studying for CCNA so forgive me if it's obvious to the rest of you where the problem lies.
The client currently has an ISDN service which is being moved over to a 2MB E1 connection.
I have configured the 1841 router with G.703 WIC according to the information given to me by the ISP. I have configured the 1841 to have the same internal IP as the ISDN Cisco 800 series router, hoping for a simple swap over. The Pix 515 sits behind the ISDN at present and will be behind the 1841 when it is active.
Once I unplug the 800 series ISDN router and plug the 1841 into the pix, I cannot get any response what so ever. I have tried changing the ethernet connection speeds between the pix and 1841 hoping it would be as simple as that without success. Can't get ping responses from either end but I can when the ISDN service is plugged in. Both ISDN and E1 link are supplied by the same ISP, Telstra Australia and the fixed IP's are able to move over to the E1 service.
I have not touched the pix in any way. A seperate company configured the router a couple of years ago.
I have included the configurations of the existing ISDN, Pix and the 1841 for you to review. Any advise/solutions would be greatly appreciated.
Thanks in Advance,

Hi,
The outside interface on your PIX is configured as 10BaseT which would be fine when using the original 800 series ISDN router.
Now with your new 1841, the interface that the PIX connects to is Fast Ethernet so you need to change your outside interface on the PIX to the same
If you want to use auto negotiation between the PIX and router then the command to do this on the PIX is
interface ethernet0 auto
I recommend using hard coded settings between the PIX and router and the command to do this on this PIX is
interface ethernet0 100full
You will also need to change your router as:
interface FastEthernet0/0
speed 100
duplex full
If you can't configure the PIX as you mentioned an external company did it, then i guess you could change your Fast Ethernet interface to "speed 10", "duplex half".
This won't create a bottleneck as you only have a 2 MB connection to your ISP
Everything else looks good, don't worry about asking questions on the forum, this is what its for.
HTH
Paddy

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Frequently transfering databases between MS SQL and Oracle

Hello all,
I am looking for a solution to easily, efficiently and be able to migrate/transfer databases between MS SQL and Oracle frequently.
I need to be able to replicate a databases on Ms SQL and Oracle for testing purposes. I will need to do this on frequent basis - almost once a week.
Please suggest what would be the best way.
Thanks in advance.

Hi Justin,
You have guessed it right to a great extend. Yes dont actually need to develop, rather need to test an application that supports SQL and Oracle databases. Now when testing the application its obviously vital to create proper systematic test data. This usually takes a lot of time and effort from the testing team/team-member. So, yes what I need to do is create the test data on one database(may it be SQL or Oracle) and migrate/transfer the data into the database on another server( ie. SQL to Oracle or Oracle to SQL).
So,
Are you developing a product that works against both SQL Server and Oracle and trying to synchonize development efforts?Yes, thats correct to extend, I need to test an application against both the servers, as it supports both types of databases, and try to reduce the test setup efforts (literally double the amount) that go in after manual creating same data on each type of database.
Are you trying to replicate structural changes between systems?I am not 100% sure, what you mean by this. But whats important and enough for me is to replicate the data. It would not be a lot of work to run the scripts and create empty schema objects.
Are you trying to replicate data changes between systems? The fact that you're only doing this weekly suggests that you're not working in a traditional replication environment.Yes, again as I mentioned above. It would be sufficient for me to just get a copy of the initial dataset. And then replicating changes to it would not be that important. However, if I can achieve a solution to this, I can by all means create a new database on the one server (SQL or Oracle) and take the data-set of the most recent/correct changes and replicate it on the other type of server as and when needed.
No - this is not a traditional replicating environment. I say weekly, because it is usually once in a week or forthnight that someone from the team will need to spent time to manually copy the test-data onto the another type of server in order to run the same testcases on two types of servers.
How do you handle conflicts (i.e. if I modify a row in both systems, which modification wins)? This is not really a problem in my scenario, as I only need to be able to transfer the data across to the different server and forget about the two databases actually being in-sync.
I have also, looked at DTS for a possible solution on SQL, however it seems highly un-realistic, having to map somewhere like 250 tables from the a drop-down list, only because the two database servers use different cases to represent tables internals. So, table 'Table' in my application's SQL database is called 'TABLE' is my applications Oracle database. DTS is highly inefficient in dealing with this. Also, having 250 tables move makes this a bit of a pain.
Thank you Justin for your response; I highly appreciate your inputs.
Regards, Nisarg

Wireless connection lost between my router and printer (hp officejet 4620)

My hp officejet 4620 printer has been working fine but now the wireless connection has been lost and I can't get the wireless connection back. The blue light for the wifi flashes blue. I can't get the connection back between the router and the printer because my wifi is actually working fine with my laptop. Any suggestions about what i can do to get the connection back so I can print again?
Is it something I need to do on the printer screen or laptop to fix the problem?

Have you powered off everything and power up again? Power off printer and router. Power on router and wait 2 mins. Power up printer and see if it connects to your SSID.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..
I am getting below error when i m trying to access oracle db using oracle 11g client. It works with earlier oracle client versions. how do i resolve this. is there any issue with version of ojdbc6.jar that i am using??? I cant use thin driver since its an old application for which i dont have source files.
Apr 6, 2013 1:00:59 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.UnsatisfiedLinkError: no ocijdbc9 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:262)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at PettyCash.SysDate.getSysSubSys(SysDate.java:232)
at org.apache.jsp.PettyCash.index_jsp._jspService(org.apache.jsp.PettyCash.index_jsp:186)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Code is as follow for reference
import oracle.jdbc.driver.*;
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
conn = DriverManager.getConnection ("jdbc:oracle:oci8:@" + database,db_user, db_pass);
eNVIRONMENT VARIABLES set are as follows:
classpath
C:\Program Files\apache-tomcat-5.5.12\common\lib\servlet-api.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\classes12.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\ojdbc6.jar;
JAVA_HOME
C:\Program Files\Java\jdk1.5.0_04
PATH
C:\Program Files\Java\jdk1.5.0_04\bin
ORACLE_HOME
D:\Oracle11\product\11.2.0\client_1\BIN

Apr 8, 2013 5:24:06 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NullPointerException
     at org.apache.jsp.abc.index_jsp._jspService(org.apache.jsp.abc.index_jsp:280)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:432)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:868)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:663)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)

What are major differences between SAP BI and Oracle BI?

Hi Experts,
I am new to Oracle BI. But I want to know about major differences between SAP BI and Oracle BI?.
Please help me....
Thanks & Regards,
A. kavya kumari.

There are at least five major differences :
S P O r c l e
but important to also be aware of the minor difference:
A/a

What is Difference between ANSI SQL and ORACLE SQL

Hi,
I am going to take the assesment test for ANSI SQL Programming before that i want to know any difference between ANSI SQL and ORACLE SQL?
I am studying for SQL but the test will be ANSI SQL please let me give an idea about the both.
Thanks
Merina Roslin

Basically there is syntax difference between both of them.
Lets say i want to join two table EMP and DEPT based on DEPTNO.
With Oracle SQL format its like this.
select e.*
from emp e, dept d
where e.deptno = d.deptnoHere the joining condition goes in the WHERE clause.
With ANSI SQL format its like this.
select e.*
from emp e
join dept d
on e.deptno = d.deptnoHere the join condition is mentioned separately and not in WHERE clause.
Oracle supports ANSI SQL starting from 9i version.
You can read more about the syntax difference Here

Score Issues between Captivate 4 and 5

Hi Everyone,
We are noticing an issue between Captivate 4 and 5 and we can't seem to figure out what is going on, this issue is with Captivate modules that have no quiz and the completion status is based only on a % of slide views. We publish as SCORM with complete/incomplete and report percent.
With these types of modules created in Captivate 4, the LMS would record a completion and a N/A score. Now, for those created in Captivate 5, the LMS receives a 0% score and the completion. Our end users are really confused as to why they see a 0%. Any ideas on what may be causing this? The LMS is Taleo Learn, formerly Learn.com's LearnCenter.
Any assitance would be greatly appreciated.
Thanks,
Connor

If you can't download any old versions by logging into your account then clearly these have been discontinued. Your best bet is ask somebody to lend you their CD/DVD which you can copy for your safe keeping.
Old products are always discontinued and that is why you should always buy them on a CD/DVD so that they can installed whenever you have a new system or you have a system crash.
Good luck.

How to find rfc connection exist between R/3 and APO ?

Hi all,
i wanted to find out...
rfc connection exist between R/3 and APO ?
kindly help in this regard..
Thanks
Joshi

Hi Sridhar,
If u have access to SM59 transaction then u can check and test the connection there it self.
If u don't have access then check the table RFCDES where all RFC destinatios defined for your system is stored.
Thanks,
Vinod.

IWay adapters between SAP ERP and Oracle

Hi,
The systemlandscape in the future is a SAP ERP System without a java stack and a Oracle system.
Importend: And without a SAP Portal and a SAP PI.
I think we will install the iWay Oracle adapter on the SAP ERP system and on the Oracle the iWay for SAP adapter.
I this solution generally possible with iWay adapters or maybe others solution between SAP ERP and Oracle?
Thank you for all answers.
Regards
Richard

Hi,
Your question is not clear.
It is true that SAP is no more supporting Dual stack systems because of performance related problems. So, we need to install As ABAP and As Java system separately. As far as oracle is concerned, you need a database to install ERP system then why you want to install adapter ?
Thanks
Sunny

Connection issues between 64 bit SSIS and Oracle in 64bit

Similar Messages

Maybe you are looking for