Connection to multiple Kinect V2, NOT for synchronous acquisition

Hi all,
I would like to connect 4 kinects v2 to a PC.
I've read that the BUS is limited and it is not possible to run multiple sensors at the same time.
In my application I need to collect the data from different points of view, but not with a synchronous acquisition, and use a single PC. Example: connect to sensor 1, acq data, close connection, repeat the same for the other sensors and then back to
1.
I wonder if this is possible playing around the pointers to the sensors and the call:
HRESULT hr = GetDefaultKinectSensor(&m_pKinectSensor);
Any suggestion?
Tnx

Hi HalphaPk1,
I would also as Oren
Physihome much appreciate some elaboration from you how did you manage do enable/disable usb to switch between kinects.
Thanks in advance!

Similar Messages

Connection to Time Capsule works not for all I-Products

Hello
Since today I have strange issues on my Home Network.
On my Ipad the connectiion is working fine with the TC, but with my Iphone 4s and Iphone 4 the connection is not working all the time. It connect from time to time but the most time it shows the message connection error.
I tried to reset the TC I reset the Iphon's, but nothing.
Do somebody know this issue?
Thanks

I have heard some interesting new info about it, but the issue is very complex. It depends on a large number of factors but latency can be an issue.
I recommend you redo the setup of the TC.
Start from a factory reset.
Use all SMB names... short, no spaces and pure alphanumeric.
That includes the TC name, wireless names.. give a different name to 5ghz and share name for hard disk.
Use WPA2 Personal security with password which matches the above.
Set wireless to manual radio channels.
Try channels 11,6,1 in that order.
But give me some more info if you still have issues.. what is the main router?
What broadband service do you use?

Can I use existing portal to connect to multiple R3 systems for config

I am planning to use existing portal 6.0 to connect to multiple R/3 systems for testing and configuration.
We have three portals in our landscape DEV TST and PRD.
Our R/3 system landscape -->DEV, DEV2, TST,TST2,TST3 etc.
DEV portal is connect to dev system TST portal to R/3 TST system etc.
Is there a way I can connect DEV portal to DEV2 R/3 System without effecting portal testing and configuration which is in progresses in DEV R/3 system.
If any one has done it in the past, please share instructions
Thanks,
adil

Hi Syed,
Check this link for creating systems.
Configuring EP for connecting to SAP R/3
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Reg : "Error multiple Receivers are not allowed for Synchronous calls"

Hi All,
Can somebody tell me why I am getting this error "Error multiple Receivers are not allowed for Synchronous calls" when I am using Synchronous Soap Request to WebService and the response from webservice is being sent to multiple receivers which are Business services based on Receiver determination condition(Services W/o Party).

Hi , If you are simply looking up data (and not updating tables ) using RFC you can use RFC Lookup APIs to create a java mapping
The source message has to be a RFC request message interface and target should be RFC response message interface.
Also you can use three step mappings in a single interface mapping.
1. from your request message to RFC request message mapping
2. java mapping which will do the lookup and give you rfc response back
3.rfc response to your target response mapping.
PS: RFC lookup can be used if there are not may hierarchy in the RFC Response structure. (i.e. may be 3 or 4 level nesting permitted)
To help you further
The following is a link which gives you access to a ready made source code. you just need to compile it and create a jar and import the mapping in imported archive
http://knowhowsapxi.synthasite.com/rfc-loolup.php
Edited by: Progirl Progirl on Oct 31, 2008 1:33 PM

When it starts setting up the trial, it says "trying to connect to server" and will not go any farther in the process. I have left it for multiple hours, yet it never works. I need help!!

I already stated the problem above, but I am able to download the file. Yet, when I try to begin the setup it says "trying to connect to server" and does not do anything else. I need help to finish the set-up!

Download trial photoshop are you on a managed network? Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.

My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.

My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.

Welcome to the Apple Community.
Check your store location is set correctly, if this doesn't help, try restarting the Apple TV by removing ALL the cables for a 30 seconds.

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Connecting to multiple Airport Express base stations for internet and TV?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single ethernet connection behind my stereo and it's connected to the Pay TV. My options seem to be an ethernet splitter (maybe - any ideas?), getting a new ethernet connection installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
It will help to know exactly what model iMac and exactly what make/model TV you have.
Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output. Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs. Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip agrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore

I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip addrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore. i tried everything I can think of. It is a 2010 macbook pro but i recentrly updated to osx lion and even with lion it was working fine so I nkow it is not the update. also Im able to connect to other internets at home it works great. starbucks too. but i became so frustated that i reset my computer to manufactuter setting and reinstall snow leopard on it. still I cant connect. I need help please i have been searching all over the web for help and i see people has been having this same problem for years now.. oh yeah and i know it is not the internet cuz there are other macs connecting to it without a single problem so i think it is an isolated problem plase help....i have follow many advises such as delete the internet from your prefered netwoks. restar your commputer etc etc.

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

Works for webrowsing, not for gaming... weird connection problems.

So back in November my wife and I were planning on moving but unfortunately the job didn't pan out and we ended up staying where we are now. I had canceled my Comcast cable internet starting Dec1st so I wouldn't get billed for the 12 days we intended to be in the state. At the time, I had my cable modem plugged into my Airport Extreme basestation (about 2 years old, but still the wireless G model) which serviced my iMac G4, iBook, XBox and Nintendo DS with an excellent connection pretty much all the time.
I recently got Comcast back again since we'll be staying where we're at for a couple more months at least, but now my network is acting funny. While plugged directly into the cable modem, my computers and XBox function perfectly. But when I attempted to set up my wireless connection again, it didn't work quite the same way again. My iMac and iBook can connect for webbrowsing and chatting on AIM/MSN although I occasionally get drops (never really happened before). My XBox won't connect wirelessly at ALL anymore. My DS will connect, but instead of getting normal "slow internet connection" lag, I get pauses. For instance, I'd play smoothly for a few seconds, and then the game would freeze, then play pretty smoothly again, then freeze again. This game forces a split host, so both players get the same lag to attempt to make the game as even as possible. But my friends who play don't have the same problem facing each other, only against me.
I've watched the LED's on the front of my basestation AND my cable modem while surfing the web, using AIM and (attempting) to play my DS. The center and right lights stay active the entire time, but the left light is almost always off. It merely flashes for a few seconds here and there and then cuts out. In fact, during the times my DS game worked smoothly, it was flashing, when it stopped flashing the game froze. Also, on the cable modem, MOST of the time while connected to my basestation the SEND light is not active, but all the others are. Again, it flashes for a few seconds here and there and then cuts out.
This modem is a different one than I had before when I had comcast. They updated the modems used in this area, so my guess so far has been that somehow the Airport basestation doesn't query the modem enough to keep the connection active. That would also explain why when I haven't been using the internet and then start to, it takes 2 or 3 tries to get a page to load. Once that happens things work pretty smoothly, albiet slower than it did the first time I had comcast/AE network setup. Also, occasionally I get an error message when trying to join the network (right after boot-up or after an error or drop) that says there was an error joining the network, and then I have to wait a little while before my iMac will even see the network again.
Does anyone have any suggestions for getting my basestation to work for my gaming systems? Or to get the network to be more stable for websurfing/chatting. I never changed any settings on my basestation from the time I had it before, in fact, it never even moved. I don't want to go buy another wireless router if it's a communication problem that can be fixed some other way. Someone please help me out. Thanks a bunch~!
Old Modem Model: Motorola Surfboard - SB5120
http://broadband.motorola.com/consumers/products/sb5120/
Current Modem Model: Ambit - U10C018
http://www.ambitbroadband.com/broadband/U10C018.php
Airport Basestation Firmware: v5.4

First welcome to the discussions.
You mention a couple of times when you had Comcast.
If you changed service to DSL it will be slower by 1/2.
Unless I am mistaken the left light is power and the middle is ethernet and the right is activity.
It sounds like you may be loosing your connection intermident. I would not chang e any settings at all on your computers and leave evrything plugged in.
I would however check and make sure that all your cables are in tight. then I would do a complete system reset.
This method is recommended by all the Router Manufactures with a little different twist added by me.
Pull the Power Adapter from your ISP's Modem. and do the same with your Router.
Wait for at least 5 minutes and plug in the Power Adapter to the MODEM First and you have to wait until you get all the lights normally 3 after that plug in the power adapter to your ROUTER and again you have to wait until it reacquires the signal and lights,I would restart your computer and give it a whirl.
It can't hurt to unplug every thing that you have plugged in Printer, scanner x box anything that could affect it untill you have a good signal again and after you are good then you can plug everything back in.
Cheers Don

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

Connection to multiple Kinect V2, NOT for synchronous acquisition

Similar Messages

Maybe you are looking for