Connexion airport faible

Bonjour,
voila ma connexion reseau airport marchait tres bien (video youtube avec connexion nickel en 720p) jusqu'a hier ou j'arrive meme plus a a me voir une video youtube en 240p j'arrive plus non plus a jouer a starcraft 2 .
Des idees ?

Il est dommage que vous ne pouvez pas jouer à votre jeu, mais nous ne parlons pas français ici. Pouvez-vous s'il vous plaît demander à votre question en anglais.
Merci beaucoup,
Charlie

Similar Messages

Connexion airport à internet

J'ai un mac mini avec airport intégré. je souhaite connecter ma freebox via airport. Est ce possible???
si oui, commenbt faut-il faire ?
merci d'avance
Suz

Mes excuses, mais ce ne sont pas une communauté de langue Française.
La question en laquelle vous parlez de moi malheureusement n'ont pas
une réponse à.

Je viens d.installer Time capsule airport , il fonctionne correctement pour les sauvegardes mais la connexion ethernet pour les autres appareils ne se fait pas pourtant j.ai bien branché un câble ethernet entre airport et ma box ?

Je viens d.installer Time capsule airport , la connexion pour internet se fait correctement
J.ai bien créé un réseau pour mes autres appareils mais la connexion ethernet ne se fait pas, l.ordinatueur indique que le câble n.est pas branche, alors que j.ai bien installé un câble tout neuf entre airport et ma box Sfr
Donc je peux sauvegarder mon Mac et c.est tout je ne peux relier mon iPad et mon iPhone à airport
Que faut il faire ?

Ok, i finally succeeded
Now the TC is linked by WiFi, but as you said, now, it's just an external device, impossible to join it :/
And it's not what i want because i need to access to it outside
If i'm right now, i say thank you, you really helped me even if it's not what i want exactly.
So Ethernet :/
Thx
---------------------------------------------- Translation
Pour les français, en gros, je dois utilisé le logiciel AirPort Utility version 5.6 (mais il me semble que le 6.0 le fait aussi en faite, j'ai pas trop regardé du coup) pour pouvoir non pas créer un nouveau réseau sans fil mais en rejoindre un
Grace à cela, la TC se connecte à la box sans fil mais devient un appareil externe, ce qui veut dire qu'on ne peux pas se connecter dessus en sans fil ou même y accéder de l'extérieur (comme moi)
Juste y accéder comme une clé USB et accéder au donnée, rien de plus.

No connexion adsl with airport express

I can't get connexion with my airport express and my modem adsl (huawei MT800). I put in my airport express all, note that I get connexion if the modem is connect directly in the mac mini! Why????

Does your ISP's ADSL connection require PPPoA? Is so, the AirPort base stations won't support this. If, instead, it uses PPPoE, then the following would be the correct settings for the AirPort Express Base Station (AX):
To set up the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

Airport express problème de connexion

Bonjour à tous,
Je me suis acheté depuis peu une borne d'extension Airport express pour générer une réseau wifi. Je l'utilisais quasisment tout les jours. Mais je l'allumais seulement quand j'en avais besoin. Et voici que, récemmenent, la borne Airport Express n'arrête pas de se déconnecter et de redémarrer. Je m'explique :
La brone Airport express possède une led qui affiche orange si elle est en démarrage et vert si elle fonctionne parfaitement. Dès que je la démarre, la led se met normalement en orange pour démarrer, et après le led devient verte. Ce qui est parfaitement normal. Mais après quelques minutes, la led redevient orange et reste orange. Elle ne clignote pas comme pour signaler que la connexion est perdue. Elle reste orange. Après quelques minutes, le réseau revient pour rdipaître quelques secondes après. En quelques sortes, la borne reste en démarrage.....
J' ai déjà essayé de la réinitialiser mais rien à faire. C'est toujours le même problème. J'ai donc besoin de votre aide pour savoir quel est le problème et comment le résoudre. Surtout que je n'ai pas de garantie dessus, donc pour 100 CHF je voudrais bien qu'elle remarche.
Merci de votre aide,
Meilleures salutations ,
BaptFrei

Bonjour,
Air port capsule revient au voyant lumineux orange après 3 ou 4 jours de fonctionnement au vert. Je le débranche et il fonctionne à nouveau pendant 3 ou 4 jours. Que se oasse-t-il?
Avez-vous reçu des réponses qui me permettraient de résoudre mon problème?
Merci
René Blouin

How to look at movies with IPAD3 using Airport express and external disk drive (USB connexion to Airport Express)

I would like to stotre several movies on an external disk drive connected to Airport express through USB port. With my IPAD, I am able to use the WiFi network (generated by Airport) buy I don't see the disk.... how to make it happen ? Thanks. JP A

Shoudl I use ICloud instead or another way ?
I have not tried iCloud for this...and understand that it is mainly for your backups. These link might help:
http://www.apple.com/icloud/get-started/
http://www.apple.com/icloud/setup/
Or, you could post in the iPad support area since that is really what your question is about.

Hello. My Macbook Pro looses wifi after 5 min of surfing. Connexion to a time capsule at 3 meters. The retailer said he changed the airport card. I had made a complete erase and re install of mouton Lion. The problem still occurs. What Can I do ?

I had not proceed to any software upgrades of the macbook or the time capsule. My other Mac book and my son PC work perfectly with the time capsule WIFI. The APPLE retailer (DARTY) don't find the root cause of this defect.
Any Idea ?

I had not proceed to any software upgrades of the macbook or the time capsule. My other Mac book and my son PC work perfectly with the time capsule WIFI. The APPLE retailer (DARTY) don't find the root cause of this defect.
Any Idea ?

Je viens d'acheter un Airport Xpress mais la connexion Internet ne se réalise pas. Une solution à me proposer?

See question please

Bonjour,
Un conseil complementaire est d'eviter de mettre autant de code dans une boucle de gestion d'évenement pour que l'application soit la
plus réactive possible au niveau de l'IHM.
Paolo_P
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Airport Extreme N works fine but not when WDS activated

I replaced my old Airport Extreme by the new 802.11n.
Works fine with our Macbooks (pro) enabled for n.
But when I activate WDS (I'd like to use my old airport Express for airtunes sometimes), an error message appears (WDS error) in the summary, and the light flashes alternatively in green and yellow... Everything else seems to work (internet connexion), but it seems no WDS possible... If I swtich it off, everything is just fine and green...
Of course I reinitialized the base, I once used the Airport utility assistant and then manually reput my personal options. I upgraded my airport firmware to 7.1 and WDS error message is still there with the flashing light... And I tried to see if my old express would make it but nope.

I had similar issues. To roll the firmware back to an earlier version try this:
- With the option key depressed, launch the Airport Utility (located: /Applications/Utilities)
- Select your problematic extreme base station and then while holding option again, click "Continue" and then choose Manual Setup.
- It should prompt you to choose a firmware version to upload. You can select 7.0 or 7.1.
The process is a little different on PC. Let me know if this solves your problem or if you need the directions for doing this from within Windows!

How to add Ethernet ports to an Airport Extreme Base Station?

I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
Any help or advice would be appreciated!
Thank you in advance for your time.
MacBook Pro with 1.83 GHz Intel Core Duo Mac OS X (10.4.7)

One final vital piece of information, which should be my conclusion on this topic.
Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
Finally, today, I have been able to find the item corresponding to my needs:
A Belkin Wireless G Router F5D7230-4
It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
With my best regards to those who took the trouble to read this thread to the end.
Yours, Hotaru

Airport extreme firmware update screwed up my IP sharing and internet

I am having all the same problems -
1) I upgraded to the 7.1 firmware
2) I got the 'double NAT' error, but no problems connecting to the internet
3) When I turned the bridge mode to off, I lost my internet, so I
4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
(If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
Now I'm afraid to touch anything!!

kayek wrote:
I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
{quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
1. Open AirPort Utility.
2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
3. Select the specific firmware version you require.
4. Click Download.
5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
6. Choose Base Station > Upload Firmware.
7. Select a firmware version and click OK.{/quote}

Airport express/Apple Tv to an Aircraft entertainment

Hi Apple support community,
We would like to create a WIFI network onboard of an aircraft (without internet connexion) via an Airport express box.
Then to connect an Apple TV box to this wifi. This Apple Tv box connected to the aircraft entertainment.
The connection between the apple TV and the aircraft will be done by an HDMI/AV cable.
We would like to display video or audio from our Iphone 5s/ipad mini to the aircraft.
Do you think that it can works ?
If the wifi speed will enought to watch movies ?
Thanks a lot for your support and have a nice day
all the best,
Philippe

Yes that should be fine. You would be streaming content stored on the iPhone or iPad over the local network so connection speed would not be relevant. It would be best to connect ATV to the router via ethernet.

Airport Express seems to lose connection after a while

My main wifi connection is through an Airport Extreme. The modem is connected to it. I also have in another room an airport express that I use as a bridge for my connection and also to use AirTunes.
Since a few weeks, the Airport Express seems to lose it's connexion after some use. It's always good in the morning, and after few hours, I realize I am no longer connected to the network. The airport light is always green, I see it in my disk utility, but I don't seem to be able to go online anymore. My solution at this point is to select my neighbor's network for few seconds, when I go back on my network, it works fine for an hour or so and I have to redo the process again.
The issue seems to be only with the Airport Express because when I'm in the other end of my house close to my Airport Extreme, I never have that problem.
Any idea what could be wrong with my Airport Express? Could it be a hardware problem? I just bought it 2 months ago. Should I go to exchange it?
Thanks for any help.

My AirPort connection worked fine when I first set it up a couple of days ago; then it stopped working yesterday: it just gives me the blinking amber light.
Strangely, though, when I use Network Diagnostics in Safari, I get green lights against Airport, Airport Settings, Network Settings, and ISP, but red lights against Internet and Server.
How can ISP be working but not Internet and Server? Also, if I pull out the the cable going into the AirPort and plug it directly into the LAN port on the MacBook, it connects to the internet fine.
Any comments/help appreciated.

My airport express keeps stopping

Hi,
I have an airport express to broadcast my dsl internet connexion in my flat and since a few days it keeps disconnecting each 20 minutes more or less, I have to disconnect it and reconnect to make it work again, it's not disconnecting from the dsl modem but from each computer connected to it. Its internal program is up to date. I don't know what is happening, could someone give me some advises about thing to do??
cheers!

it's the airport itself that is shutting down
"Shutting down" means that the Express powers off and the indicator light turns off. Is this what is happening?

Airport Extreme has ethernet connection but no internet connection

I am having an airport extreme connectivity issue that has yet to be resolved. For me, the cable modem (a Motorola Surfboard) recognizes the airport extreme (I have the round white saucer one) but the airport extreme, despite giving me an 'ethernet' connection (that also shows up as full signal strength in the menu bar), cannot connect to the internet, no matter what I do.
Seems the airport extreme is not recognizing/picking up the ip address of my computers.
The airport base station is recognized by airport utility, has an ID and I can name it as well as create a network, but no matter what I do and despite being told that I am connected to the internet via ethernet, there is no connection to the internet.
I have a dual G5 desktop hooked up directly to the cable modem and am trying to wirelessly connect a new macbook pro intel core dual.
Each computer can access the internet when directly hooked up to the cable modem, but neither can access the internet wirelessly.. so it's not the computers, nor is is the cable modem. I called Time Warner, all is fine with that connection.
Both my ethernet cables work (checked them both). So it must be the airport extreme.
I was on the phone with apple tech support for 5 hours yesterday!!! They made me run through all the things I did myself. From trying to reconfigure and rename the airport to completely resetting the airport. None of this worked.
And right now I'm on hold for a multi-media product specialist with apple tech support.
But they didn't do a thing for me yesterday so I'm hoping someone on here may know what to do.
I think I need a new airport extreme. Anyone???

Hello Laura, Jim, Richard...
Now my internet connexion work on my AEBS (Airport Extreme Base Station)... It seems that (for me) DHCP was the problem...
DHCP server (10.0.1.x) activated on the AEBS conflict with DHCP server (192.168.1.x) activated on the modem.
Before the AEBS 5.7 update (i made yesterday) this configuration with two DHCP servers with different IP addresses worked well... but not now...!
So, i disabled the Modem DHCP server. I rebooted the modem and the AEBS and success, my internet connexion worked again...
I used manual setup with fixed IP, submask, DNS to connect the AEBS to the modem...
I hope this could help you, Laura and Jim...
Sorry for mistakes, i'm french mac user
Message was edited by: mikeosx06

Connexion airport faible

Similar Messages

Maybe you are looking for