Consistently losing memory and problems with backups?! Help!!

Hi all. My iPhone 5 (32gb, thankfully) started to randomly lose a lot of its memory, every other week i would maybe see some of this also randomly return until it got worse. It used to go, return with desperate attempts (restarts and memory the filling method) and would just disappear within a minute. I deleted small things to make space and they'd go within a week or so too! Then it got REAL bad, i would delete things and the memory would disappear within seconds, which scared me a lot (maybe the flash memory's lost it and can't read/write so good any more?) so i deleted a 1.9GB game which bought me some time as the memory was only slowly being taken away this time, but it was shocking to see all of that go too, slowly (1.8, 1.7, 1.6 and so forth). I googled desperately and found a 'solution' for this and it WORKED! (Renamed a few files.) I managed to stop the memory being consumed and i was left with just under 1GB - but I've lost about 3GB or more in total (and maybe more that I've not kept count of).
Problem now is that i can't get any of that back and i cannot buy the new iPhone 6 unless i have a way of shifting all my data to the new device. If i simply 'restore from backup' on the new iPhone, this deficit in memory would possibly carry over (i think).
Another issue with backups is that they also carry other little bugs over from previous devices. For example, my old iPhone 4 randomly started showing 2 dark purple-near black artifacts/specs on every photo and video and i thought it was the camera itself. When i got the iPhone 5 2 years ago and carried over the 4's backup, the iPhone 5's camera had these same specs in the same places!
Because of these weird issues I'm laying off buying a new iPhone until i either find a way to migrate my data to the new device OR i can find a way to reclaim my lost memory at the least even if that means keeping the weird camera problem!
Has anyone had any of these issues or combination of issues? Is there a way to fix all this? Is there a way to transfer all my data without having iTunes carry over the bugs?
Thanks in advance!

Hi Zephryl,
I was actually able to get an initial response from Sun on this a few months ago. However, the Sun Swing team has not followed up on a resolution for this pervasive problem, even though they noticed the same problem when running a test applet I had created for them. Apparently, I.E. is not releasing memory from the heap.
Below is a quote from a Sun rep. on this in an e-mail sent to me on Dec 4, 2002:
"I suspected the leak is in the native code because the # of handles and GDI objects keep increasing but no obvious Java objects are left behind in the Java heap during page switch."
So, until Sun and/or Microsoft work out a solution to this, anyone who uses I.E. 6 and applets for their UI seems to be in a lot of trouble.
As a note, trying to invoke the Garbage Collector does not do anything, but generally a very small amount of memory will be released (like maybe 5-10% of the memory allocated for the applet).
Cheers!
Avi Gray
Global Computer Enterprises

Similar Messages

New C6-01 user/phone and problem with backup/resto...

Hello everyone.
I recently purchased a new C6-01 (and first-time Nokia owner) and having trouble with getting maps restored onto a new 32GB uSDHC card and need some help.
It is my understanding that I can backup and restore all my phone contents and settings to a new memory card using Nokia Suite. So what I did is performed a complete backup using Nokia Suite, ejected the old uSD card (that came with the phone), put in the new uSD card that I had purchased and format it, then performed a complete restore to the phone and the new memory card.
During the restore, I saw errors on the phone display that said something like disk write error and gave me the option of stop or retry. I hit the retry a few times and still getting the error. Thinking it may be a bad uSD card, I returned/exchanged for another identical one. With the 2nd new card, I still get the same error message so I rebooted the phone and ran restore again but this time instead of restore everything all at once, I selected a few items at a time and eventually got everything restored, at least without errors this time.
When I ran maps after the restore, it told me that I needed to download the maps, and when I tried to download it thru a WiFi connection (at my house), I keep getting Disk error - cannot complete write. Retry or data will be lost. At this point if I run Files, it will show drive E but not any free space number (and selecting it will show free space not available). A reboot will bring back drive E and show 29.4GB free. So I am completely stumped at this point and believe that for whatever the reason I can not get maps loaded onto a non-Nokia-provided memory card.
I am running Nokia Suite 3.5.34 on WIndows XP w/SP3. The new 32GB uSDHC card is a class 4 card made by Sandisk. The phone is running the Belle Refresh v111.040.1511 dated 7/28/2012. Map version: v3.09 12wk20 b01-MW OpenGL MN-Map version 0.2.46.103
Sorry for the large amount of information posted here, but I wanted to provide enough details for you to look at. Please feel free to ask for more information and thank you in advance for your help.
Bill

yes I reformatted the card, and after it was finished, I ran Maps. When it told me I need to download the maps (and gave me 3 options), I exited and connected the phone to my computer, browsed and deleted the cities folder and the qf file. Waited a little bit and reran Maps. This time I used the WiFi connection from the phone to download.
I gave me an error when I tried to download the entire USA maps, so I selected Texas and Pennsylvania state maps. Those downloaded ok. Next when I tried to download New Jersey, it started a little bit and the disk error message came up again so I hit stop. Ran Files and saw the memory card is grayed-out (did not indicate and free space), I know the same problem is happening again.

Oracle 10g standard edition installation and problems with logon (help pls)

I installed 10g standard edition, however I got the following two messages during installation:
1) The host IP address can not be determined
2) Missing or Invalid password ...
Eventhough I unlocked all the passwords during install (tiger/scott, sys, system, etc) I can not logon now with none of them ("invalid username/password: logon denied"). I also get "ORA-12170: TNS: Connect Timeout Occured" when trying to lgoon with my email addr and password used for installation.
Please help, this is frustrating. Thx!
P.S> Do I need to input anything in the "Host String" box ?

Chances are
1) you are using WIndows of some sort;
2) your machine does not have a static IP address (you are using DHCP);
3) you have not installed the loopback adapter, as desrcibed in the installation document.
You may want to review the Oracle Database 10g (release whichever you are using) "Installation Guide" manual for your operating system again. I think you missed a step.

When trying to install ios5 on my iphone, I get error message that there is a problem with backup, if I continue with update all data on my phone will deleted. I cancelled the update and phone is fine. Anyone know the cause?

When trying to install io5 on my iphone4 I get an error message during the updtae that there is a problem with backup and if I continue with the update, all the data will be deleted from my phone. I cancelled the update and my phone is fne. Has anyone else experience this? What is the cause/solution?
Yhanks!

DON'T DO IT! Read the threads ... there is a MAJOR problem with updating iPhones 3GS/4 to iOS 5.
Take it to the Apple store and ask them to do it.
I repeat: DON'T DO IT YOURSELF.
(Voice of experience.)

Memory leak problems with loading videos over and over.

I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
     // start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
     trace("VideoLoad(" + pUrl +
     VideoCreate();
     if (pUrl != "")
          if (fVideoFolder + pUrl == fVideo.source)
               fVideo.seek(0);
VideoReady(null);
          } else {
trace(fVideo.state);
               if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
     } else {
// error no url
function VideoCreate():void
     trace("VideoCreate()");
     // remove old one
     if (getChildAt(0) == fVideo)
          removeChildAt(0);
     fVideo = new
VideoPlayer(1024, 768);
     addChildAt(fVideo, 0);
     fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);

Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

Problem with backups on Tape

Could you help me ,I have a problem with backups on tape drive .The error which Windows throws is "BackupTapeFile::UnloadTape: PrepareTape(UNLOCK) failure on backup device '\\.\tape0'. Operating system error 21(failed to retrieve text for this error. Reason: 15105)."
Does anyone of you have the same problem.Thank you!

You cannot perform a regular restore/recovery (up to the latest possible point in time), because at this time dropped tablespace is not known to the controlfiles/recocery catalog and therefore not known to RMAN,too. You have to 2 possibilities:
1. Restore the entire database and recover back in time to before the tablespace is dropped.
This will cause ALL data within the database to go back in time, not just this tablespace.
2. Clone the target database to a new location, perform point in time recovery in order to export
the data of the tablespace for import into the original database. This causes the data of this
tablespace to be brought back into the production database, not effecting existing (current) data
in any other area of the database.
As you can see recovering from a dropped tablespace needs some additional efforts. By the way you also cannot use RMAN's TSPITR functionality.
Werner

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I did that and it is currently whirring away, had over 16000 emails as everything got imported when I set emails up (only had this computer 5 days). So will see what happens when it stops doing whatever it is doing. Sorry if I appear stupid but first Mac I have owned so everything a bit new. Have managed to get most things working correctly just can't sort this BT email problem out. Will report back later!

ITunes has stopped working. Problem with iTunes Helper Module

After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

Problems with "Mac Help"

My help files, especially "Mac Help", no longer work properly since upgrading to Tiger. If I open "Mac Help", for example, the help window will pop up, but the links will not work (nothing happens when I click on them) and the search feature in help will not work either (the little gray "clock" just spins next to the help bar and nothing else ever happens). Any suggestions on this one? As I'm a relatively recent Mac convert, the help feature was something that I came to rely on. Thanks!

Hi CP,
This is a common problem with Mac Help. When it happens, try first (quit Help) deleting this folder:
Home/Library/Caches/com.apple.helpui
If Help still doesn't work, try then deleting those files:
Home/Library/Preferences/com.apple.helpviewer.plist
Home/Library/Preferences/com.apple.help.plist
(and this one if you find it):
Home/Library/Preferences/com.apple.helpui.plist
See also this KB article for more info
- Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits
and this excellent X Lab FAQ
- Troubleshooting Help Viewer
It seems (not sure about that), that Help caches get easily corrupted when interrupting searches instead of patiently waiting for its internet accessings etc?
Good luck!
Axl

Problem with Adobe Help Online

Dear sir,
Hi, My name is Palm.
I have a problem with Adobe Help. Every time I use the function "Leyer Style" >> "Gradient Overlay".
Adobe Help Online is often displayed without my pressing or click anything.
It was a problem with my work.
I have to restart the program. To work again.
Thanks for the help.

Thank you.
It's excellent for this solution.
I have solved the problem as suggested.
Now the problem is still not found but I will monitor this issue further.

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

My iphone is not syching at itunes. Everytime it says your iphone as been diconnected whenever I try to synch it, while logo on phone and itunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5 with backup as well

My iPhone is not synching at iTunes. Every time it says your iPhone as been disconnected whenever I try to synch it, while logo on phone and iTunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5. This problem is with the back up as well.

Hi singhgurwinder79,
The article linked below provides details that can help troubleshoot this error and get your iPhone to sync correctly with iTunes.
iTunes: Resolve USB-related alerts
http://support.apple.com/en-us/HT203843
Regards,
Allen

Like many people I have problems with Backup and n...

When i try to backup my n80 via Nokia suite i receive error message on 1% "Connection to phone was lost.Please reconnect and restart backup.".I try to backup via blouetooth and USB cable that comes with n80 (CA-53), same problem!
Windows XP Pro SP2 with last updates!
Running Nokia Suite 6.80.22
Bluetooth from D-Link DBT-120 with latest drivers
I use windows firewall, AVG Antivirus and Search & Destroy, but havent any error messages by installation of Nokia Suite!
All things in Nokia Suite works without problems, except Content Copier!
I use for conncetion USB 2.0 on front from case!But its not a hub, its direct pluged into mainboard!
N80 firmware is V 3.0614.0.3 11-04-2006
And sorry for my poor english!

Allready tryed to connect USB cable on back from my PC,
It does not help, same thing like before!
I can only backup when I chose in settings from Content Copier "Include only memory card."
In time I installed some applications in phone (I read post from cracker1979), but I haved same problem after I received my phone, I only create contacts and tryed to Backup, with same error mesage!
I tryed allready before my posts to find answers on my qastions, but without luck, I cant find post that end with "This is resolved with this method" etc....but i see many people have same problem like me!Message Edited by dado on 18-Jul-2006
01:46 PM

Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal

Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it helps you at all or for feedback/ideas. Well first off I had the crackling noise popping so on even when my machine was idle. If you have not done this yet do it
!!! Start, Control Panel, Sounds Speech and Audio Device, Change Speaker Settings, Advanced (in device volume), ok now there is a bunch of sliders go to "options" check everything, ok now that you see all the sliders mute Everything besides: Play Control, Wave, CD Player for testing purpose. You will probably hear a difference as you do it. Especially Mic 2. Ok well that issue resolved my popping crackling noises when idle. Ok so I still have a shared IRQ issue since I have an Asus A8N32-SLI Deluxe board and the slots go as such PCI-E, PCI, PCI, PCI-E, PCI. Well since the GeForce 7800 GTX cards I have take up not just the PCI-E slot, but also the PCI slot is covered from the Huge Fan. Then the Same thing for the Second graphics card. So I have only one slot that works for my PCI Fatalty sound card. Well this forces me to share PCI IRQ between one of the Video Cards and the Sound Card. Its not a "conflict" it is simply sharing the IRQ, after the above issue fixed my popping issue this no longer was a concern. Now my big issue is that I sent my Sub Woofer in for RMA, I have the Gigaworks S750 7. THX speakers, they are great but when I really crank up the volume on them I would get the sound like a speaker was blown in the left rear channel, so I swapped another speaker in its place and I have the same problem. So the RMA folks said to send in the Sub Woofer which cost me over $30 to ship the thing only to have them tell me there is no problem. Well I had recently done RMAs on my sound card, both Video Cards, and my mother board too in hopes of fixing the next problem. So everything is new though I got a refurb on the mobo. So I'm just waiting on my Sub woofer now so I'm using my headphones and guess what I'm finding there is this noise in the left speaker, an issue I sent the headphones back for a long time ago when I was using them waiting to buy my speakers. I have the Creative Pro Gamer headphones. So now I read a post about someone else with the same issue left channel, and I have to wonder I am not alone and that usually means in Creative Labs land there probably is others with this issue that have spouses that wont let them stretch their audiophile legs with extreme volume, if this is you try it out kick up the bass, and see if you have this problem too, if so please post it here. I have no clue on this one and I am open to any ideas. Ok and the last issue!! This is the real problem I'm facing now. I play EQ2 I love my MMO titles with the occassional single player title for those short stints at the computer between work, parenting, and stuff my wife demands be started before she finishes speaking of it (those of you married know what I'm talking about). I have 2 operating systems, XP Home, and XP Pro 64. Home I use for Office, graphic design, and general applications. XP Pro 64 I use purely for gaming. All my games are installed through this OS which is on my 2 74 Gig Raptors in Raid 0, I have another Partition for XP Home, and a 3rd for all the game installs. So I recently found that after selecting Extreme Graphics option in EQ2 then moving the rest of the sliders to Max that my G5 keyboard which has a performance monitor in it showing the amount of Ram usage showed me hitting about 90% and would spilke at the same time as I found I had frame rate slowdown. So I decided to get 2 more gigs of Corsair Twin XMS 3500Pro 024x2 memory bumping me up to 4 gigs. Well I had to go into the bios I found and change a memory setting to discrete and enable the memory hole in order for XP Pro 64 and the motherboard to see the memory. At this time I was working on other things with my computer, and suddenly the popping noise came back so I'm pissed now.... But oddly its not happening in XP home, only in XP 64. So I'm thinking I may have to go to XP home for my gaming OS, then just before I install home I remember that XP home wont register 4 gigs of memory.... So I go turn off the memory hole and discrete settings and this sets the memory to 2 gigs.... Crackling sound in ALL EAX GAMES goes away.... So now clearly my issue with my sound card and EAX crackling noise is Memory related somehow. Now I have isolated it to 4 gigs of memory, but it makes me think of those folks with this issue perhaps something is amiss with their memory and how it works with timing, or onboard memory on the sound card which is a first time memory is put on a sound card?.... Any input is appreciated as to how to repair this issue, thanks for reading, below is my system set up.
rocessor >
?Model:???? x AMD Athlon(tm) 64 X2 Dual Core Processor
??????4400+
?Speed:???? 2.2GHz
?Model Number:???? 4400 (estimated)
?Performance Rating:??? PR7072 (estimated)
?Cores per Processor:?? 2 Unit(s)
?Threads per Core:??? Unit(s)
?Type:????? Dual-Core
?Internal Data Cache:?? 2x 64kB Synchronous, Write-Back, 2-way set,
??????64 byte line size
?L2 On-board Cache:?? 2x MB ECC Synchronous, Write-Back, 6-way
??????set, 64 byte line size
?<Mainboard >
?Bus(es):???? ISA PCI PCIe USB FireWire/394 i2c/SMBus
?MP Support:???? 2 Processor(s)
?MP APIC:???? No
?System BIOS:??? American Megatrends Inc. 8.2
?System:????? System manufacturer System Product Name
?Mainboard:???? ASUSTeK Computer INC. A8N32-SLI-Deluxe
?Total Memory:???? 3.9GB DDR-SDRAM
?<Chipset >
?Model:???? Advanced Micro Devices (AMD) Athlon 64 /
??????Opteron HyperTransport Technology
??????Configuration
?Front Side Bus Speed:?? 2x 005MHz (200MHz data rate)
?Total Memory:???? 4GB DDR-SDRAM
?Memory Bus Speed:??? 2x 200MHz (400MHz data rate)
?<Video System >
?Monitor/Panel:??? Default Monitor
?Monitor/Panel:??? HP D895 HP P20 2-inch Monitor
?Adapter:???? NVIDIA GeForce 7800 GTX
?Adapter:???? NVIDIA GeForce 7800 GTX
?hysical Storage Devices >
?Removable Dri've:??? Floppy disk dri've
?Hard Disk:???? WDC WD2500KS-00MJB0 (233GB)
?Hard Disk:???? WDC WD3200JD-00KLB0 (298GB)
?Hard Disk:???? NVIDIA? STRIPE? 38.49G
?Hard Disk:???? Generic USB CF Reader USB Device
?Hard Disk:???? Generic USB MS Reader USB Device
?Hard Disk:???? Generic USB SD Reader USB Device
?Hard Disk:???? Generic USB SM Reader USB Device
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVDRAM GSA-463B (CD 40X Rd, 40X Wr)
??????(DVD 5X Rd, 5X Wr)
?<Logical Storage Devices >
?.44MB 3.5" (A:??? N/A
?Applications - games - storage:233GB (5GB, 65% Free Space) (NTFS)
?Xp home (D:???? 24GB (5.6GB, 23% Free Space) (NTFS)
?CD-ROM/DVD (E:??? N/A
?Xp 64 (F:???? 24GB (5GB, 63% Free Space) (NTFS)
?Raptor games (G:?? 90GB (7GB, 8% Free Space) (NTFS)
?Ssdisk (H:???? 629MB (CDFS)
?Bf2xpack cd (I:??? 677MB (CDFS)
?Farstone (J:??? 00MB (CDFS)
?Removable Dri've (K:?? N/A
?Removable Dri've (L:?? N/A
?Removable Dri've (M:?? N/A
?Back up dri've (N:??? 298GB (3GB, 44% Free Space) (NTFS)
?Removable Dri've (O:?? N/A?EvolovE

Evolve,
I have the a8n-sli Premium which as you stated is basically the same board with a couple extra items. I have the latest beta bios ver -06. Since the early fall release the option which we will be talking about was available in the premium board which it I remember was Bios rev 9. I would download the latest bios rev.
07.04 (latest beta?or go with 06)?and flash in. Here are the steps to get the proper memory options to work and I have also included my system specs to compare.
) Hit Del to get into Bios
2) Go to the second tab on the top of the screen "Advanced"
3) Select the first option in the menu "CPU Configuration"
4) Select the first option in the "CPU Configuration" menu called "DRAM Configuration"
5) Select Manual configuration from the first Menu item.
6) The last two options in the same menu for DRAM are s/w remapping over 4G and h/w remapping over 4G. Select the "s/w remapping option over 4G" and enable it. Disable the "h/w remapping over 4G."?
7) Hit f0 and save the config.
You should now at post have 4GBws total but only 3GBs of usable memory and your X-fi should crush it in XP64 and XP32.
My Specs
A8n-sli premium (Bios -06)
amd X2 4400 (~2.5 GHZ)
4GB LL patriot memory (~228 HZ)
X-Fi Extreme Music
LSI 320-2e PCI express SCSI RAID controller (256MB buffer)
2x Seagate Cheata 5K.3?dri'ves
All water cooled
Good Luck
PapaH
By the way this is defiantly a XP64 driver problem because even with h/w remapping enabled in XP32 the card sounds fine. It only happens in XP64.

Problem with Backup with Rescue And Recovery 4.31

Hi
How are you My friends ?
I have a problem with my thinkvantage , it say I never get backup and it is true , but i can not fix it because i can not get backup from my hard disk
I do my job step by step but in the backup process nothing happen
I mean every thing going right untill the exactly geting backup and it stop and do any work in 0 %
and my system crash ( of course something like crash I mean my mouse work but any click , do nothing and alt+ctrl+del dosen't work and I just can fix it by holding the power key)
there is here some information about my system :
1. Win 7 ultimate 64bit
2. I have thinkpad edge 14"
3. core i 3 370m
4. 4G ram
5. rescue and recover 4.31
6. 500G hard
7. My system is new and I want to get backup just becuase of my driver and Operation system
And there is pics of my system and works i do
Link to picture
Link to picture
Link to picture
Link to picture
then after i press the OK it goes to start but it wait on 0 % and do nothing and system crash
Please Help me to solve this problem
Thanks every body
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

It errored out after it has already created some folders and files as indicated in the first post.Tried the same steps several times just make sure it was repeatable by closing Rescue and Restore app and starting it again. The network between the share host and my W510 was a direct RJ45 cable connection, so zero hop. In the end I used Windows 7 Backup and Restore to do full backup, using the same \\server\sharename, the network share was mapped without a problem. But then Windows 7 Restore CD wasn't able to map network share - giving me 0x800704cf. Googling shows lots questions raised on this but no fix.
Update:
Last night, I gave it a shot again. For some reason, RR was able to mapped the network share using \\IPaddress\sharename (this time I used a different folder and a diferent sharename). OK great, but after 10 hrs it's at 88% completion, did my math, estimated elasped time is 12 hrs, Wow! The image backup with Windows 7 Backup took 5 hr 51 min with 132GB in the WindowsImageBackup folder. RR is 2x slower!
On the other hand, as it's still running, the est. backup folder size is 106GB. RR does a better job in compression - a 20% reduction in size compared with Windows' at the cost of 2x time.
Going back to the Windows 7 Restore CD 0x80704cf error when mapping the network share, found an Internet user posting that he succeede by providing a NIC driver.

Consistently losing memory and problems with backups?! Help!!

Similar Messages

Maybe you are looking for