Console message and system.log

Hi,
in the console system.log always apear this message every 30 second:
+Feb 16 02:22:55 Macintosh SystemUIServer[346]: Error: ACInterfaceGetPower() called with invalid interface+
+Feb 16 02:23:25: --- last message repeated 5 times ---+
and every 5 second this other message:
16/02/08 02:40:55 SystemUIServer[346] Error: ACInterfaceGetPower() called with invalid interface
.. and the message look like an infinite loop message.
Is it a problem ?
And i can ear the Internal HD run always.
Thanks on advice for any help
Ale

I just went through a bunch of research on this on my own iMac G5. (BTW - do you have an iMac G5 or an iMac Intel Core Duo? It can't be both)
It comes down to the items that the SystemUIServer is trying to call. if you look at <homefolder>/Library/Preferences/com.apple.systemuiserver.plist and open it with TextEdit, you'll see that, among other things, it references 8 menuExtras -
Battery.menu
Displays.menu
TimeMachine.menu
Bluetooth.menu
AirPort.menu
Volume.menu
Clock.menu
User.menu
While logged in as an administrative user, I launched System Preferences, Activity Monitor, and the Console looking at *+All Messages+*. I got the same ACInterfaceGetPower() error every 5 seconds, too. So I went through the Preferences and deactivated each menu item above, but the messages continued to appear.
I had two items that might have been causing a problem. The first was the fact that I had the AirPort signal showing up in the menu bar, even though the Network location I have set up does not have AirPort as an available service. I added the Airport service back in, disabled the menu icon, removed the AirPort service again, and Applied the changes. I'm pretty sure the error message was still appearing at this point.
The big change came when I opened up Accounts. First, I went to the Login Items section for my current user. I noticed that the EyeTV Helper and an Adobe process were both there along with the iTunes Helper process. I removed the first two using the "-" at the bottom. That actually appeared to fix it, but I proceeded to the Login Options section and disabled *Fast User Switching*. That removes the users from the menu bar. By this time the only thing left in the menu bar was the Spotlight icon.
Switching over to Activity Monitor, I killed the SystemUIServer process. It restarted and the ACInterfaceGetPower() messages did not reappear. I then re-activated each item, one at a time, killing the SystemUiServer after each activation. Again, the messages did not appear. I did not re-activate Bluetooth or AirPort, since I do not need them.
I am no longer getting those messages and the system appears to be running fine right now.
I have an external monitor attached to the iMac G5 as well as 4 FireWire hard drives. I am connected to the outside world via FiOS and I have a 100 Mb CAT-5 connection to that router.

Similar Messages

  • ICal writing tons of log messages into system.log

    Hi all,
    I've got an issue with iCal under Leopard 10.5.1.
    Sometimes my syslogd process grabs ~100% CPU time and so I took a look into system.log.
    I saw MANY lines like this:
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.363 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p774
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.364 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p2754
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.364 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p288
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.365 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p2056
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.366 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p148
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.367 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p73
    Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.497 iCalExternalSync[4230:10b] SyncServices precondition failure in [ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
    Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.521 iCalExternalSync[4230:10b] [ICalExternalSync ]Encountered [ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
    Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.526 iCalExternalSync[4230:10b] [ICalExternalSync ]NSException name:NSInvalidArgumentException reason:[ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
    Any idea how to fix this?
    Here's another problem that might be related to this: my "Private" calendar was published in 10.4 but now the webdav server that was used for this is no longer existent (and can't be setup again).
    So I wanted to unpublish my Private calendar but this wasn't possible. When trying to unpublish it I get the error message "This calendar could not be unpublished. Authentication information may be incorrect."
    If I select the "Cange location..." menu entry in the context menu of the Private calendar I still see the webdav server address and the Login and Password fields are filled. But because this server no longer exists publishing is no longer possible. Which is fine with me.
    So, how can I get rid of the publishing? Because I get tons of error messages in system.log, too, for this behaviour. Everytime the system tries to publish this calendar...
    Thanks,
    Stefan.

    I am not much of a help, but I just wanted to say that my iCal just experienced the same problems for the first time today...

  • How to write messages into system log(sm21) using c_write_syslog_entry

    Hi,
    May i know how to write my application messages into system log(sm21)
    using "c_write_syslog_entry". Any explanation regarding the Type. ID, Data
    will be useful with examples. Incase of any other FM's or C functions does
    the same Please let me know.
    Thanks
    Prasath

    Hello Prasanth
    I agree with Kareem that you should prefer the application log. If interface IF_RECA_MESSAGE_LIST is available on your SAP system this is the first choice for collecting messages AND storing them as application log.
    For an example you may have a look at my Wiki posting [Message Handling - Finding the Needle in the Haystack|https://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
    Not shown in this example is the storage of the application log. However, if you look at method CF_RECA_MESSAGE_LIST=>CREATE you see that you can add the application log references here.
    Regards
      Uwe

  • Blackberry 8310 Curve randomly deletes text/sms messages and phone logs

    Why does this keep happening to me?
    There are times that my phone goes over a week without it happening and then there are times like today it has happened three times.
    I will have maybe 5 ot 6 text messages in my inbox and maybe 2 or 3 emails and I get a phone call and POOF the text messages and phone logs are gone!
    I have repeatedly lost important text messages and numbers from my call log.
    The tech support excuse for it is that I have too many messages in my inbox which causes it, but 6 sms messages and 3 emails is too much?
    I have tried everything (updating the desktop software, updating all of the settings NOT to delete messages until i delete them, hard booting my phone once a day, etc..) and it still does it.
    This also used to happen with my Blackberry Pearl.
    If I can't get it resolved, I will just switch to the iPhone.  I can deal with the randomly dropped calls, but constantly loosing my call logs and text messages is BEYOND frustrating and Blackberry tech support has been no help!.
    Solved!
    Go to Solution.

    DCmuseum,
    Hi,
    You have low free memory left on your device.
    Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
    I do not know your experience level, so if you know this I'm sorry but please read and let me
    know if this applies.
    Most people close the applications by pressing the escape or red key. This does not close the applications.
    Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
    Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
    you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
    Read the link below and follow each step that Tanzim outlines,
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9225#M9225
    If you follow these steps and keep up with your memory your phone will operate smoothly.
    Please let us know if you need help with any of the steps.
    Thanks
    Message Edited by Bifocals on 09-07-2008 11:58 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • One day I just went on my iPod on messages and the log in sign showed up I thought that was weird because I am always logged i so i logged in and it went all the way back to the start! It is the same with FaceTime I do not know what to do?

    One day I just went on my iPod on messages and the log in sign showed up I tried logging in and it just brought me all the way back it is the same with FaceTime please help!

    Try:
    iOS: Troubleshooting FaceTime and iMessage activation

  • Where can I find detailed instructions on transferring message and call logs ?

    I failed to find good info on this using search etc. I switched from Droid X to Galaxy Note 3 recently. On Verizon Cloud, it tells I have the logs uploaded but my Galaxy Note 3 does not display them and I am unable to download the logs into my new phone from Verizon Cloud. Thanks in advance for any help.

    Thank you Tominque. Here is the update: I misunderstood the restore phone option as going to factory settings after I had used my phone for a few days and feared to touch it. However, later I saved some of the stuff on my phone and took a chance after talking to one of your helpful reps and it worked. I got my messages and call logs into my phone, happy ending. It would be nice if there is a little more explanation on the Verizon Cloud.

  • Default Trace and system Log

    Hi all,
    I have got  default trace and system log folders
    Default trace - \usr\sap\J2E\JC00\j2ee\cluster\server0\log\.
    Security log - \usr\sap\J2E\JC00\j2ee\cluster\server0\log\system
    I need to know are these folders specific to setup package created . I mean can i get these folders for one i created on specified date.
    Answers would be rewarded
    Thanks and Regards
    Neha Kapoor

    The problem is solved

  • Randomly erasing messages and call logs.

    I have a Blackberry Pearl 8100, it's started erasing my messages and call logs. When it starts doing it, it will delete messages before I even have a chance to recieve them, or read them. It will also freeze up while loading some applications.
    I've checked my memory and it says I have 11379836 bytes free. I have a memory card so the only things  saved on the phone are the defaults and one picture. The only way to fix the messages thing is to take the battery out for a few minutes but it ends up doing it four or five times within a day. 
    Please help! (=

    britt - just wanted to say Welcme to the cmmunity supprt frums! you are in excellent hands with John_clark.... He is one of the best around here! 
    Nurse-Berry
    Follow NurseBerry08 on Twitter

  • Console and system log help please

    During boot-up I get these errors in the system log:
    During shutdown (power then restart option) 2-4 times in a block
    Aug 15 11:31:16 EPsMBP kernel[0]: (63: coreservicesd)tfp: failed on 0:
    During restart 5 times in a block
    Aug 15 11:31:20 EPsMBP kernel[0]: (1183: ps)tfp: failed on 0:
    Later 5 times in a block
    Aug 15 11:31:24 EPsMBP kernel[0]: (1219: ps)tfp: failed on 0:
    Later
    Aug 15 11:31:59 localhost kernel[0]: USBF: 9.640 Errata bits for controller 0x8086/0x27cc(rev 0x2) are 0x5800
    Aug 15 11:31:59 localhost kernel[0]: USB caused wake event (EHCI)
    Aug 15 11:31:59 localhost kernel[0]: USBF: 9.659 Errata bits for controller 0x8086/0x27c8(rev 0x2) are 0xe800
    Aug 15 11:31:59 localhost kernel[0]: USBF: 9.659 Errata bits for controller 0x8086/0x27c9(rev 0x2) are 0xe800
    Aug 15 11:31:59 localhost kernel[0]: USBF: 9.659 Errata bits for controller 0x8086/0x27ca(rev 0x2) are 0xe800
    Aug 15 11:31:59 localhost kernel[0]: USBF: 9.659 Errata bits for controller 0x8086/0x27cb(rev 0x2) are 0xe800
    Then general under 5 times in a block:
    Aug 15 11:32:03 EPsMBP kernel[0]: (49: SystemStarter)tfp: failed on 0:
    Also in the console log during boot-up:
    NOTE: ignoring this component:
    Discovered 0 component = 0x64e6f6 type = imdc subt = 1Bt2 manu = Domi flags = 0
    NOTE: ignoring this component:
    Discovered 0 component = 0x64e104 type = imdc subt = 1Bt3 manu = Domi flags = 0
    NOTE: ignoring this component:
    Discovered 0 component = 0x64e154 type = imco subt = 1Bt3 manu = Domi flags = 0
    What does this mean? I'm running on a brand new install or 10.4.7 with all firmware updates for my macbok pro. No hardware attached, permissions repaired, disk repaired, memtest checks out OK.
    should I be worried?
    Thanks
    Edd

    Exact same issue here!
    I think it has to do with some third party app. I've used Kuvvo to automatically get wallpapers from the net en change them.
    After I decided to go back to my own wallpapers and removed the Kuvvo app, my wallpaper prefs is crashing.
    I tried to reinstall Kuvvo with the hope of fixing broken links / references but to no avail!

  • Org.samba.winbindd logs constant throttling respawn messages in system.log

    I am running Mac OS X 10.6.4 on a MacBookPro5,1 (Intel Core 2 Duo) system.
    My network connectivity is fine as far as I can tell. I recently discovered the following message being logged over and over in the system.log log file:
    7-17-10 11:49:09 o'clock com.apple.launchd[1] (org.samba.winbindd) Throttling respawn: Will start in 10 seconds
    7-17-10 11:49:19 o'clock com.apple.launchd[1] (org.samba.winbindd[157]) Exited with exit code: 1
    This is really annoying when trying to view the log output to diagnose a problem I with an application I'm trying to develop
    What can stop these message from appear in my log output?

    I checked the Console application and found a log file in it call log.winbindd. It has several entries like the following in it that might be relevant:
    [2010/07/17 14:44:14, 1] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbindd.c:main(1024)
    winbindd version 3.0.28a-apple started.
    Copyright Andrew Tridgell and the Samba Team 1992-2008
    [2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbinddcache.c:initialize_winbinddcache(2222)
    initializewinbinddcache: clearing cache and re-creating with version number 1
    [2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
    opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
    [2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
    secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
    [2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbinddutil.c:init_domainlist(505)
    Could not fetch our SID - did we join?
    [2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbindd.c:main(1130)
    unable to initalize domain list
    What insight does this offer into the cause of the messages and how to stop them?

  • Error Message in System log

    Hi, I recently discovered this error message in my system.log
    /Applications/Safari.app/Contents/MacOS/Safari: CGContextClipToRect: invalid context
    I am using Safari version 2.0.4 on Tiger. Can anyone tell me what it means and if I need to worry about it. Thanks!

    Hi,
    It's just a debugging entry the programmers have left in the Safari/WebKit code. It looks like the webpage you are viewing is causing one of the rendering functions used to draw parts of the page to behave in an unexpected way.
    Nothing to worry about as such.

  • Warning messages in system log after upgrading to SP4

    Hello there, I am starting to see quite a lot of warning messages in the system log saying the following:
    Failed loading JDBC Driver class com.microsoft.jdbc.sqlserver.SQLServerDriver - Exception:java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
    Failed loading JDBC Driver class com.sap.dbtech.jdbc.DriverSapDB - Exception:java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
    Failed loading JDBC Driver class org.gjt.mm.mysql.Driver - Exception:java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
    We are using MSSQL as the underlying database, so maybe something needs to be unchecked somewhere? Any ideas?
    Best regards,
    Anders

    Anders,
        I just updated to SP4 and tried a user creation (my database is also MSSQL). I did not see any warnings in the system logs. Like Thomas said you must have extra entries in the Tools/Option/Java/JDBC driver names.
    All you need is just one entry "com.microsoft.sqlserver.jdbc.SQLServerDriver".
    Hope this helps.
    Thanks
    Shabna

  • Empty messages in system.log repeated in a large number

    I am getting on my terminal the following message:
    Broadcast Message from [email protected]
                       (no tty) at 19:07 PDT..."
    Apr 18 19:07:25 Andreis-MacBook-Pro-L kernel[0]:                              
    Looking around on Internet I leaned that I should examine /var/log/system.log
    I find that I have empty messages repaeted an amazing number of times:
    Apr 18 19:27:17 Andreis-MacBook-Pro-L kernel[0]:
    Apr 18 19:27:17: --- last message repeated 801 times ---
    Apr 18 19:27:17 Andreis-MacBook-Pro-L usbmuxd[21137]: _AMDeviceConnectByAddressAndPort (thread 0x100704000): IPv4
    Apr 18 19:27:17 Andreis-MacBook-Pro-L kernel[0]:
    Apr 18 19:27:18: --- last message repeated 1001 times ---
    Apr 18 19:27:18 Andreis-MacBook-Pro-L Xcode[22615]: _AMDDeviceAttachedCallbackv3 (thread 0x116301000): Device 'AMDevice 0x408121ea0 {UDID = b8b2c1d0f684f0c8189faf6a560f38bd9a8232a8, device ID = 17, FullServiceName = f0:cb:a1:08:7d:5c@fe80::f2cb:a1ff:fe08:7d5c._apple-mobdev._tcp.local.}' attached.
    Apr 18 19:27:18 Andreis-MacBook-Pro-L Xcode[22615]: _AMDDeviceAttachedCallbackv3 (thread 0x113a2a000): Device 'AMDevice 0x40253d940 {UDID = b8b2c1d0f684f0c8189faf6a560f38bd9a8232a8, device ID = 17, FullServiceName = f0:cb:a1:08:7d:5c@fe80::f2cb:a1ff:fe08:7d5c._apple-mobdev._tcp.local.}' attached.
    Apr 18 19:27:18 Andreis-MacBook-Pro-L kernel[0]:
    Apr 18 19:27:48: --- last message repeated 70929 times ---
    Apr 18 19:27:47 Andreis-MacBook-Pro-L kernel[0]:
    Anybody has a clue why this may be?

    Apache is a webserver.
    Go to console
    type:
    sudo apachectl stop
    enter your password. you should not have that issue again

  • RADIUS messages in system.log, all day long

    My 10.6 server's system log is full of RADIUS messages, every few seconds, making me think that something isn't as it should be. We have an airport extreme base station as our router and RADIUS access point. I configured the airport base station from the server, thru server manager.
    Feb 3 17:50:32 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:56:00 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:56:00 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:56:21 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:56:21 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:58:53 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:59:07 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Fe

    Also NOW I suddenly have two 256 cards that are not showing up so I have lost half of my RAM! I have less than 12% space left on my hard drive. Two of the cards look the same and two others look alike ( I have four 256 cards) Two years ago the repair shop put in two used cards so I would have all the same. I tried re seating them but it didn't work and I still get repeating messages in my systems log.

  • Repeating messages in System log: com.apple.wikid.mailinglists[######]: mail:status = "list-updated"

    Hello
    I have an OSX 10.6.8 server and recently noticed the System log keeps repating the same message after 10 mins:
    com.apple.wikid.mailinglists[#####]: mail:status = "list-updated"
    [#####] = number that changes every event
    The server is bound to Active Directory and the only active services are AFP and SMB
    Is there a location/way I can check to stop/fix these messages?
    Many thanks for your help
    Ciao
    Carlo

    This is part of the wiki server's setup. If you don't want the messages, turn off the wiki (or 'collaboration services' in the web server setup.
    Beyond that, there's no harm in the messages. Why do they concern you?

Maybe you are looking for