Constantly Dropping From N to G on 17" MBP

OK, my neighborhood is absolutely awash in g networks. I was forever having to manually move to a relatively clear end of the spectrum, only to find myself needing to move again a day or two later (one of my neighbors apparently shuts down his WiFi every time he's finished using it, thus he comes up on random channels all the time). So I finally bit the bullet and bought a 1 TB Time Capsule. Oddly, my Mini stays pegged on N channel 149, whereas my 17" MBP keeps dropping down to g. I do have an all-in-one that I spent a lot of money on a few years back and it only does g. Also, my iPhone is g. Any way to peg this thing to N? Anyway to kick it back up once it drops down to g? With the way things are, I've basically wasted $300 (the backup function of the capsule holds value to me, but not $300 worth all on its own). I work from home when not on a client's location and thus my network connectivity is paramount. And I do a lot of RealVNC between my MBP and my Mini, so I really do consume a lot of WiFi bandwidth. Or I would if I was constantly dealing with interference in the g band of channels...

Post and ye shall receive! After a bit more fighting with this thing, I discovered a feature that I thought was sorely lacking. Namely, the ability to have separate SSIDs for your different frequency bands. If you go into manual configuration of the Time Capsule, there is an advanced option that you can check that adds "(5 GHz)" to the SSID. Thus, you can set your Macs to prefer the N before the g or just eliminate the g altogether. So this should solve the problem. Thanks to those of you who popped into this brief thread and hopefully this will help someone else new to the Time Capsule down the line...

Similar Messages

  • Why is my mac air constantly dropping from my time machine

    Hello, I have an IMAC, an iPad and now a Mac Air....ever since I purchased my Mac Air last week, I am constantly dropping from my time machine...( time capsule router) ....This is very frustrating...everything worked well until then....
    Is there a solution to this? I read many who have a time machine lose connection....It happens to me every time I try to use my Mac Air....
    I am constantly having to wait for it to find a connection.
    please connect
    <E-mail Edited by Host>

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Have a look at this it might help
    http://support.apple.com/kb/TS4148

  • We used to have great service, now it sucks! Constantly dropping calls, dead areas that have never been dead. Getting fed up and getting no help from Verizon.

    This is really getting old, no help from Verizon. Service was great 2 years ago now it sucks, Constantly dropping calls, dead areas where there used to be fine. What is verison doing to help this???

    I have an iphone 5s, my husband has a casio, my sister in law has a Samsung, my friends have various phones we are all experiencing the same thing – dropped calls, no service and it is outside as well as inside the house or the car. At our residence and along the drive to work or to the store. I don’t text much or use my data much so I am mostly concerned with the telephone service.
    Every day may not be good, but there's something good in every day. Author Unknown
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • I can't drag and drop from a data CD I recorded

    I recently burned some audiobooks files (in mp3 format) as data cd's in Toast 8.0.1. When I go to reload them back onto my 20" 2 Ghz Dual Core Intel I can't drag and drop the files directly into any folder while using the columns view in a finder window. I can do it if I drag onto the music folder and let it spring open down to the level of the folder. I also can drag the mp3's into iTunes and then into the folder. This is not CD related since I used several diff brands.
    I constantly update, backup, repair permissions, and do other maintenance so everything is up to date. I have noticed this behavior just since I started to use the program called Audiobook Builder. I am (and have always used) a non-admin user account. When this started a few months ago it seemed to go away with a restart, permission repair, or a logout but now it seems permanant. I checked user permissions on my home folder - I have not added any software since adding Audiobook Builder. Any idea's? I read something about trashing a com.apple pref but didn't try that.
    I suspect Audiobook Builder since it changes the permissions and filetype to the iTunes Audiobook filetype but have not seen anyone reference this.
    wes

    dj_paige wrote:
    While the programming of course could be done, the idea of a function that performs on original unprocessed images seems to violate the whole idea of what Lightroom was designed to be. At least that's my opinion. Of course, the idea that Adobe should do this programming for a relatively small number of people (you're one of a very few people to ask for this, that I have read) seems to be something that isn't going to happen.
    I agree, I can't see much reason for drag-and-drop to drag the unprocessed image - in other words, an image that isn't the one that you see when you drag and drop.  I can see that just filling this forum with "why the heck does it do that????????" posts.  I could be wrong, but I suspect that Adobe won't do that. 
    But if you do want to drag-and-drop the original unprocessed image, you can do it very easily now.  Right click the image, choose "show in Explorer", and then drag-and-drop from Explorer. 

  • SOLUTION to your HP printer going offline and/or constantly disconnecting from the network

    If you are having a problem printing, scanning or faxing with any HP Printer because of it going offline and constantly disconnecting from the network, here is the fix!
    I figured this all out after many unsuccessful attempts with HP Support, my Internet Service Provider and various troubleshooting tasks including reinstalling HP software over and over and over.  Well, through self teaching on the internet and 6 grueling months of research, I FINALLY figured it out.  OMG!  I am a Paramedic (not IT) and somewhat computer literate but by far no expert.  I here all of you!  Nobody seems to have the answer but I am 97% sure that I do.  Either way, please reply back and let me know that this did in fact work for you!  :-)   
    It doesn't matter if your printer is installed wirelessly or wired.  Don’t worry about reinstalling your software, no recycling your printers’ power or your Router/Modem.  The reason your printer is unstable on the network and continues to either go offline or disconnect from the network is NOT because the software is glitched, it’s not a firewall problem per say, it’s not a router problem, there isn’t a problem with your power cord, it’s because most networks use a “range” of IP addresses and for security purposes, it sort of “cycles” the various devices’ IP addresses to decrease the chance of an attack.  A printer is no threat but the “network” doesn’t possess human intelligence so it doesn’t know this.  Below are my step by step instructions on how to basically make your printer hold its IP address (static IP) instead of changing back and forth through a cycle therefore dropping your printer off the network or disconnecting. 
    Funny, if you are someone who has had items in your print cue, they won’t print, and you turn your printer off and then back on and suddenly your documents print…well, join my club.  The reason this works is because when you first turn on the printer, it starts with the same IP address before it cycles.  If you are someone who sits there for a while and suddenly your documents print without you changing anything…this is because through the IP cycle change, it hits your printers IP address and the network will allow it to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes but not all the time.  Since I figured this out, I can SCAN, PRINT and use all of the features of my installed HP software such as HP Solution Center, Photosmart Essentials.   
    On your printer, go to menu/setup/network and press OK.  Inside the network menu, print a "network configuration page" so you can see the IP address and other settings for your printer.
    Now, go back to main menu on your printers’ screen.  Or you can go to your web browser and type in the IP address using the decimals too and this will take you to your printers’ web page.  Choose: setup\network and press OK.  Look for IP settings and press OK. Choose "manual" instead of "automatic". Enter the IP address there manually as well as the default gateway which you can see on the network configuration page that you printed earlier.  Note: If you manually set the printer's IP, make sure that it is outside of your router's DHCP range. Otherwise you may run into an issue with duplicate IP's on your network. (If you don’t know how to do this, write back and I will explain).  Don’t forget to click “save changes”.  Now, restart your computer and print anything you want.  :-) 
    A trick I often use with printers in DHCP networks:
    In Printers and Faxes right click on the printer and select “properties”.  Click add a new port.  Choose standard TCP/IP port configured to the printer host name. Read the hostname from the printer's network configuration sheet.
    Using my method means that you always connect to the printer even if its IP changes (which may happen with dynamic configuration). This does not jeopardize your network security.  It just tells your printer to stay put and stop traveling the IP address highway.  :-)
    This question was solved.
    View Solution.

    The DHCP range is the range of IP addresses the router hands out automatically as devices join the network.  The DHCP range is determined by the router and each brand has a range set at the factory (that can be changed by you).
    Your D-link's DHCP default range is 192.168.0.100 to 192.168.0.199.  So, outside the DHCP range is .2 to .99 and .200 to .254.
    Attached is a handy cheat sheet.
    You can change this range by entering the router's settings page - type the router's IP address into a browser, enter the login info and navigate to the DHCP settings area (varies based on router, hunt around).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP
    Attachments:
    Router Facts.pdf ‏25 KB

  • External hard drive constantly dropping USB connection

    Last week I bought a 1 TB drive from Hitachi to use for video storage and rendering, but it seems that every 15 minutes or so, the USB connection drops itself and then immediately reconnects. This of course proves to be a problem when it happens while I'm transferring data. I've had a number of uploads fail because of this and I don't want to start editing several hours of HDV video in FCP only to have the connection constantly dropped.
    Any thoughts/suggestions?
    Thanks.

    I've recently started having similar problems with my external USB devices - including a 500GB Western Digital External USB drive. But it's not just the drive. I have a USB hub plugged into the left USB port and the whole thing was switching on and off - turning off my mouse, disconnecting my USB drive and restarting my iPhone charging (and restarting iPhoto every time, of course, to download any new photos).
    Initially I suspected the USB hub (which has it's own power supply) had gone bad somehow but after reading about all the problems MacBook Pro owners have been having with their USB devices I'm not so sure anymore.
    Trying the right USB port now to see if it exhibits the same problems. So far it's working fine with just the drive plugged in. I'll let you know.

  • My new Macbook Air constantly drops its Internet connection.

    Running 10.8.1. Constantly drops connection to Internet, even though Airport shows it's connected. Browser, email, etc., all say there's no internet connection. I can get reconnected by putting machine to sleep, then reawakening it, but eventually connection drops again. Sometimes it goes on and off for no apparent reason, sometimes it stays connected. But it mostly just drops it after a few minutes. Maddening, to say the least.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership. If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to  exchange or return it for a refund. In other countries, the return policy may be different.

  • Broadband constantly dropping out

    My broadband constantly drops out. I am paying a fortune to BT to provided an unlimited broadband service and during watching one film this morning I've had to reboot my router 6 times so far and I'm still only half way through watching it. On top of randomly losing connection, when ever the phone rings connection is lost. Can anyone help. Really don't wish to call BT because I've spent hours getting no where with then before, on other issues.

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    resetting your connection is the worst thing you can do and only makes matters worse.
    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home? If you conenct to test socket with a new filter and receiving a phone call drops your internet connection then you have a high resistence fault and need to report a phone fault to 151 not broadband fault.  get this fixed and connection will improve
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Broadband Constantly dropping since Broadband Talk...

    Firstly - if anyone from BT reads this and cares about customer service and support, get a grip it is the worst support I have ever had the need to contact!
    Two weeks ago I finally swap my fully working and stable Netgear router over to a Home Hub, with the intention of getting rid of my Vonage VOIP service (which works a treat, but costs!) and use the Broadband talk service. The hub and phone arrived on the 10th (I think) and plugg in and all worked well ... however it would seem that I did not have the required broadband talk number and password. It took nearly two weeks of long phone calls to various people getting no where, when finally last night they activated it and sent out the relevant information via email!
    However now my broadband connection is constantly dropping, and broadband talk light sometimes goes back to blue, but often just stays at orange ... and as the broadband is dropping (as I type, but hopefully I'll get a window to post it in) my internet connection is now useless.
    Performing the line check on the BT website said there was a fault and gave me a reference number and a number to call. That's when two and half hours of passing around started. They tell me I don't have a line fault, that it is a fault at my end.... they seem **bleep** bent on finding something they can blame it on. Are you connected via wireless or ethernet, well I have both. Which operating system, well I have Seven, Vista, XP Pro, 98, Me, an PS3 and an Iphone. Then we move down the it must be the cables to the socket in the house (well not changed since last night when BBT was activated!), and then I have to move the cupboard in the hall to get access to the master socket to tell them what it looks like! What is the point of that one!!
    I am told that it is purely a coincidence that it dropped when the BBT was activated (one **bleep** of a coincidence!) and after much more discussion finally I was told that he was 'honestly sorry' that I had a problem, and would book an engineer to look at it tomorrow between 8am and 1pm, but they need 48 hours to resolve it! Basic maths that one!
    Has anyone else experienced these problems? Why is BT customer support so scripted and if your problems don't follow the tick boxes they are lost, and just start again? If I pay my phone bill late, I get charged a fee for doing so ... what compensation do I get for loss of service?
    The broadband lights finally came back on so I'll try the post option.

    Further to my last, this is a section of the event log from the router, the VOIP certainly appears to be having a problem.....  (I've removed my phone number so the ***'s are normally a number.
    12:50:11  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:50:11  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:50:10  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:50:10  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.6 dB)
    12:49:58  24 Sep
    FIREWALL event (1 of 1): created rules
    12:49:58  24 Sep
    xDSL linestate down
    12:49:58  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:49:43  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 200 OK - SIP message received
    12:49:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:49:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 401 Unauthorized - SIP message received
    12:49:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:47:07  24 Sep
    VOIP: [2.0A] [100] [] 404 Not Found - SIP message sent
    12:47:07  24 Sep
    VOIP: [2.0A] [100] [-] OPTIONS - SIP message received
    12:44:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:44:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:44:41  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:44:41  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.3 dB)
    12:44:28  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:44:24  24 Sep
    FIREWALL event (1 of 2): created rules
    12:44:24  24 Sep
    xDSL linestate down
    12:43:10  24 Sep
    CONFIGURATION saved by TR69
    12:43:02  24 Sep
    SNTP Synchronised to server: 213.123.20.170
    12:42:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:42:42  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:42:41  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:42:40  24 Sep
    PPP link up (Internet) [86.129.29.132]
    12:42:40  24 Sep
    PPP CHAP Chap receive success : authentication ok
    12:42:40  24 Sep
    PPP CHAP Receive challenge (rhost = ESR5.Sheffield3)
    12:42:36  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:42:35  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:42:27  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:42:23  24 Sep
    xDSL linestate down
    12:42:17  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:42:04  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.0 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.4 dB)
    12:41:58  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:41:51  24 Sep
    xDSL linestate down
    12:41:49  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:41:29  24 Sep
    PPP link down (Internet) [86.129.24.10]
    12:41:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:41:05  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:41:05  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:41:04  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:40:48  24 Sep
    FIREWALL event (1 of 1): created rules
    12:40:48  24 Sep
    xDSL linestate down
    12:38:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:38:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:38:05  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:38:05  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.2 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 23.0 dB, Up: 7.5 dB)
    12:37:50  24 Sep
    FIREWALL event (1 of 1): created rules
    12:37:50  24 Sep
    xDSL linestate down
    12:35:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:35:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:31:56  24 Sep
    LOGIN User admin logged in on [HTTP] (from 192.168.1.66)
    12:30:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:30:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:30:19  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:30:19  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.4 dB)
    12:30:02  24 Sep
    FIREWALL event (1 of 1): created rules
    12:30:02  24 Sep
    xDSL linestate down
    12:29:05  24 Sep
    CONFIGURATION saved by TR69
    12:28:33  24 Sep
    [CWMP] Too many AUTHENTICATION FAILURES CPE -> ACS.
    12:28:30  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:28:30  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:28:29  24 Sep
    FIREWALL event (1 of 2): deleted rules
    12:28:29  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:28:15  24 Sep
    FIREWALL event (1 of 2): created rules
    12:28:15  24 Sep
    xDSL linestate down
    12:27:53  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:27:53  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:27:52  24 Sep
    PPP link up (Internet) [86.129.24.10]
    12:27:52  24 Sep
    PPP CHAP Chap receive success : authentication ok
    12:27:51  24 Sep
    PPP CHAP Receive challenge (rhost = ESR5.Sheffield3)
    12:27:47  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:41  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:40  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 23.0 dB, Up: 7.3 dB)
    12:27:35  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:32  24 Sep
    PPP link down (Internet) [86.137.179.222]
    12:27:29  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:27  24 Sep
    xDSL linestate down
    12:27:08  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:27:08  24 Sep
    FIREWALL event (1 of 2): deleted rules
    12:27:08  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 11.9 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:26:55  24 Sep
    FIREWALL event (1 of 2): created rules
    12:26:54  24 Sep
    xDSL linestate down
    12:26:54  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:26:07  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 200 OK - SIP message received
    12:26:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:26:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 401 Unauthorized - SIP message received
    12:26:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:26:05  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.0 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.2 dB)
    12:25:53  24 Sep
    xDSL linestate down
    12:25:53  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 200 OK - SIP message received
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 401 Unauthorized - SIP message received
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:25:23  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:25:23  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 6.9 dB)
    12:25:17  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:25:10  24 Sep
    FIREWALL event (1 of 1): created rules

  • 2012 MacBook Pro Intel i7 (purchased May 2013) constantly drops airport connection. My 2006 MacBook Pro has no problems connecting and staying connected.

    I received a 2012 MacBook Pro INtel i7 for my birthday this May 2013. It constantly drops my airport connection. My ancient 2006 MacBook Pro has no problem connecting to airport, nor staying connected. I've had to write this message several times as I keep losing the airport connection and have to reconnect. BTW: I am less than five feet from the airport base.
    Thanks for help.

    After trying all of the above the suggestions, the problem returned as before. However, after digging some more I discovered that the issue appears to lie with the 10.4.10 version of the Mac OS; when I checked the software log under the system profiler I noticed that I had installed that update at about the time my Airport problems began. Apple then quietly released a v 1.1 combo update to 10.4.10 on July 2nd, which once installed appears to have resolved the problem. You can find the download at http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
    What's curious is that originally Apple listed that the v 1.1 combo update resolved some issues with RAW image data, and some sound problems, which don't seem to have anything to do with Airport.

  • Keep getting dropped from my server

    Why do I keep getting dropped from my server? We have 3 computers in our house - all on our wireless router - I have the only Mac and I am the ONLY one experiencing this problem! After using the internet for any length of time, if I let the computer set idle for a short period of time, a window comes up saying Safari cannot find server! This will happen everyday - ALL DAY - and I'm really tired of restarting my computer (which can't be good) I have looked at other FAQ and I saw where someone else was having this problem but when I tried the downloads that was recommended to them, it came up that my computer did not support that download (or something like that). Anyone have any suggestions????

    I have the same problem as you, I found that disabling the IPV6 setting and resetting the PRAM helped a bit.
    How does it work on your Macbook, on mine if I leave Network Diagnostics open flickers on and off constantly.

  • Wifi constantly drops while watching Live Stream TV

    My Wifi constantly drops while watching Live Stream TV. I cannot make it through a 30 min tv show without it dropping me serveal times.I can only resume if I refresh and re-connect to my reouter.  I just had my service installed 3 weeks ago and have been told I have the latest router.   

    The most likely cause for your findings is that your neighbor is using a different channel on his router, or he is broadcasting a stong signal on the same or a nearby channel, and interfering with your signal.   However, don't rush out and change your channel to the same one he is using, as this may only make things worse.  There are, however, several things to do to improve your wireless connections:
    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, Bluetooth (including Bluetooth game controllers), microwave ovens, wireless mice and keyboards, and your neighbor's wireless network. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Hope this helps.
    Message Edited by toomanydonuts on 05-08-200704:34 AM
    Message Edited by toomanydonuts on 05-08-200704:35 AM

  • Constantly dropping calls no matter the phone

    All Verizon phones constantly drop calls in my house.  Signal constantly bounces from 2-4 bars when the phones aren't moving.  The only place I can make calls without dropping signal is if I step out in my back yard.  How do I put in a ticket or have someone check this out.  The problem has been here since I moved in 2 years ago, however it's progressively gotten worse.  Phones are HTC Winphone 8x and Samsung Brightside, but family's Droid X2, Iphone 4, Iphone 5, LG showtime, and a couple other basic phones all have same issue.

        Hi mtpica112471!
    I apologize for the inconvenience because I realize the importance of operable service! Let's look into this. Current zip code? There can challenges present with indoor coverage.
    Thanks,
    AyaniB_VZW
    Follow us on Twitter @VZWSupport

  • FTTP Drops from a steady 200Mb to a steady 95Mb

    Greetings,
    I've recently migrated from a 576K ADSL connection that constantly dropped to a 200Mb FTTP connection with BT which has been excellent in terms of speed and service. I am in a rural area and contention seems low as I always got 210Mb off peak and around 190mb at its lowest at peak times. Last week we had some lighting storms which caused power cuts and I'm assuming the loss of the connection (The ONT has battery backup and was still synced but the BT home hub five would only authenticate intermittently), after the storm concluded service returned to normal. However the next day I noticed the bandwidth had dropped and run a test to check, the result now is always 95Mb regardless of when the test is run. I've power cycled both the hub and modem a few times since and also copied a file over the LAN (Gbit) to test the speed (~85MBytes sec) and done a speed test with my laptop plugged directly into the hub, it always tops out at 95Mb.
    I can't think of anything else obvious on my end? I'm thinking it is probably a setting that has returned to default on BT's side.

    In order to rule out the Homehub as potentially being the device responsible for your speed loss, you can connect the Openreach ONT directly to the PC and see if the speed improves.
    To do that follow these steps:
    Step 1: Remove the homehub from the ONT cable
    Step2: Connect your pc/laptop to the ONT via the cable instead
    Step3: Open network and sharing centre on windows and click set up a new connection or network
    Step4: Connect to the internet then click make a new connection Broadband PPPoE
    Step5: Username [email protected] and the password as BT
    Step6: connect, If it doesn't,keep pressing try again until it does.
    However, please note that this will stop any other access apart from the PC
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

Maybe you are looking for