Consuming WS using X.509 certificate not working after NetWeaver 7.02 SP08

Hi
For more than two years we have had a solution that consumes web services over HTTPS using an X.509 certificate for authentication. Now, after upgrading to NetWeaver 7.02 SP08, the web services no longer work.
Today, roughly a week after the upgrade, all the logical ports have been set by the system to an Inconsistent state, and have been renamed with a prefix of ERROR.
When I try to re-create the logical ports I cannot assign the correct PSE file from STRUST to the newly created Logical Port. Previously, we would go into SM59 and set the SSL Certificate to the PSE containing the client and root certificates. But that option is apparently no longer available, see DUETE - Logical Port for OBAfielReciever. 
I have been able to get the HTTPS communication to work again by copying the SSL certificate of the service provider into the PSE ANONYMOUS. But I cannot get the soamanager to use the client certificate, so I always get a "HTTP Code 403  : Client Authentication Error" back when consuming the web service.
Any pointers on how to attach the PSE to the logical port would be appreciated.
Best regards,
Bo

Still no ideas ?

Similar Messages

  • HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection?  I have even tried creating a new apple ID but the same message appears

    When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection.  I have even tried creating a new apple ID but the same message appears.  I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • Certificate not works when deploy the store app package by powershell

     I request a web service with a pfx certificate in windows store app, it works well, but after I create a package by VS2013, and
    deploy the app with powershell, access web service failed, seems the certificate not works. Any hints, suggestion ? My code as below:
    string certRawData = StringEncryptionHelper.Decrypt(ConfigurationLoader.ApplicationSettings.CertificateData.RawData);
    string certPassword = StringEncryptionHelper.Decrypt(ConfigurationLoader.ApplicationSettings.CertificateData.Password);
    await CertificateEnrollmentManager.ImportPfxDataAsync(certRawData,
    certPassword,
    ExportOption.Exportable,
    KeyProtectionLevel.NoConsent,
    InstallOptions.None,
    ConfigurationLoader.ApplicationSettings.CertificateData.FriendlyName);
    CertificateQuery certQuery = new CertificateQuery { FriendlyName = ConfigurationLoader.ApplicationSettings.CertificateData.FriendlyName };
    IReadOnlyList<Windows.Security.Cryptography.Certificates.Certificate> certs = await CertificateStores.FindAllAsync(certQuery);
    certificate = certs.FirstOrDefault();
    var protolFilter = new HttpBaseProtocolFilter { ClientCertificate = certificate };
    var client = new HttpClient(protolFilter);
    HttpResponseMessage result = await client.GetAsync(requestUri);

    Hello Mosser lee，
    As this issue is related to Development, it is recommended to post in the related MSDN forum.
    The professionals there will be glad to help you.
    https://social.msdn.microsoft.com/Forums/en-US/home
    Thanks for your understanding.
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

    I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Web service Security using X.509 certificate

    Hi All,
    I have a web service deployed on the SAP Web AS J2EE.
    I want to include Authentication option in my web service
    I have configured the settings for using X.509 certificate(HTTPS) in my
    web service configuration and similarly I've configured my client proxy
    for the same.
    My question is..... from where do I get the X.509 certificate?
    actually I have the .crt and .der files, which I created from
    the visual administrator.
    And also do I need to install anything on my SAP server
    in order to use the authentication service? (Any prerequisite)
    Thanks,
    Talimeren

    Hi Talimeren,
    when you want to use certificates you have to setup SSL which you've started already. You have to get and import a server certificate which authenticates the server while the client creates a SSL connection. The cert has to assigned to the SSL port. For NW04 you can find the guide here http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
    If you want client authentication by certificates as well you have to import at least one root certificate from a certficate authority (CA) which you trust and by which all user certificates are signed.
    SAP delivers the IAIK library for WebAS security, but this depends on your WebAS version and installation. I suggest you setup SSL and try to make a connection. If the connection can be made, the security library should be there.
    HTH
    Daniel
    Message was edited by: Correct Link
            Daniel Sass

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • My camera does not work after I restored the system, how can I use it again?

    My camera does not work after I restored the system, how can I use it again?
    Thank you for your help!

    Did try to restore "as new device" without using the backup after that?
    Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

  • HT3867 automatically connect to known networks using wi fi is NOT working

    "automatically connect to known networks" using wi fi is NOT working. Please can any one help

    Hi jvichatt,
    Welcome to Apple Support Communities.
    You may find some of the steps in this article helpful for troubleshooting your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Best,
    Jeremy

  • I will using of firefox but not working shortcut key of website.

    I will using of firefox but not working shortcut key of website.
    It's working in chrome and I.E.

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • TS1307 The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

    The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

    "Well Known" TCP and UDP ports used by Apple software products
    http://support.apple.com/kb/TS1629?viewlocale=en_US

  • Mail not working after using migration assistant - what am I missing?

    Mail not working after using migration assistant - what am I missing?

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • I cannot get past the password screen on my old laptop - I'm entering the password I always used and it is not working

    I am trying to log on to an old laptop and I cannot get past the password screen - I'm using the password I always used and it is not working.  Even the clue doesn't help.  Is there anything I can do.  The last time it was turned on the apple staff transferred data to my new laptop.  Help

    If the old Macbook(?) has Snow Leopard 10.6 installed, and you have that retail install disc or the system disc of the current (base level) system on it, you could use the installer disc as a boot volume and use the utilities on the booted install disc to reset the password. It should be a menu option in the booted Install disc, way short of any effort to re-install anything. And if your computer can do this, the same DVD has Disk Utility, to check/repair the Mac HDD.
    What OS X version do you have, & what MacBook, etc is that?
    Good luck & happy computing!

  • Uploading Files Using InputFile Component -- Sometimes not working

    Hello,
    This is the 2nd time I make a post about it!
    Because I have more than 1 application using upload, and everything is correct! But it doesn't work as it should!
    You can check the original post here: Uploading Files Using InputFile Component - Sometimes not working
    I need a solution please!
    The only thing we can conclude is that it could be a bug from oracle !!! (???) But I talked with other people and they say that it works fine for them.
    There is one important thing: when we put a form to "Uses Upload = true" it seems that the page doesn't work very normal. For exemple: if you use a table in a form that uses upload the table get's "crazy".
    Thanks,
    JP

    I have now access to METALINK!
    I can find some problems and patches about inputFile but not mine! I will check better later!
    I think the problem is caused because of my framework!

Maybe you are looking for