Content server problem

Hello,
I would like to link my ECC 6.0 system with an (outdated..) 620 Content server
This works fine for non secure data
Now I would like to enable signed url's.
for this you need to enable security=1 in the Content server .ini file.
Furrthermore you should be able to check the certificates in the CSADMIN Certificates tab.
if I go to this tab I recieve the following error at the bottom :
Error In HTTP Acces: IF_HTTP_CLIENT->RECEIVE 1
I googled and browsed the forums but without result.
as anyone seen this problem, and even better has a solution ?
Thank you SAP collegues
Hans

Hi Diane,
No, we haven't fully resolved this yet. In addition to the issue listed we've come across a number of others that look like problems from install. We've reached the point where it's looking more effective to try and uninstall Content Server and do a clean install from scratch rather than debug every little thing.
As part of the new install we're changing the architecture to create an internal ImageServer on the CS server and then use a scheduled task to push everything out to the external ImageServer on the portal box overnight. This should get around a number of the firewall and dns issues currently making communication between the two quite difficult.
We recently installed another 5.0.2 portal in a different environment and have had none of the same issues with it so we're a little perplexed. When we get this resolved I'll be happy to write a note about what it was. In the meantime if you get anywhere with yours please let us know.
cheers
Anita

Similar Messages

Content Server problem after 5.0.2 upgrade

Hi,
We've just upgraded our staging environment from 5.0.1 to 5.0.2 and have lost all branding. The diagnostic script reports the following error:
==========
Community Branding Image Publishing Target : FAIL Settings
Community Branding Image Publish File Location: file://localhost/C:/ProgramFiles/plumtree/ptimages/imageserver/plumtree/portal/templates
Community Branding Image Publish Browser Location: http://<SERVERNAME>/imageserver/plumtree/portal/templates
Community Image FTP User Name:
Community Image FTP Password:
Possible Resolution
The file could not be found at the browser locationEnsure the community branding settings in content.properties are correct. The file location and browser location must be valid paths.
Error Details
Exception Message: Connect Failed. HTTP response code: 404
======================
I tried resolving both the file location and the http address from within the Content Server box and was able to without problem so I know it's not these it can't see.
I checked the pcs.log and the following error is reported:
======================
com.plumtree.openfoundation.io.XPFileNotFoundException: jscomponent file for jscontrols not found or failed to load.Exceptions encountered: - com.plumtree.openfoundation.io.XPFileNotFoundException: Failed to receive response from http://<PUBLICURL>/imageserver/plumtree/common/private/js/jscontrols/jscomponent.xmlin the alloted time (10000ms).======================
It appears that the Content Server is trying to access this xml file via the public url for the image server which, due to firewall configurations in this environment, it won't be able to do. I'd like to be able to change how it looks for this file to be http://<SERVERNAME>/imageserver rather than http://<PUBLICURL>/imageserver
Where is it getting this from for me to change it?
Thanks in advance for your advice, hope my problem description makes sense :-)
Anita

Hi Diane,
No, we haven't fully resolved this yet. In addition to the issue listed we've come across a number of others that look like problems from install. We've reached the point where it's looking more effective to try and uninstall Content Server and do a clean install from scratch rather than debug every little thing.
As part of the new install we're changing the architecture to create an internal ImageServer on the CS server and then use a scheduled task to push everything out to the external ImageServer on the portal box overnight. This should get around a number of the firewall and dns issues currently making communication between the two quite difficult.
We recently installed another 5.0.2 portal in a different environment and have had none of the same issues with it so we're a little perplexed. When we get this resolved I'll be happy to write a note about what it was. In the meantime if you get anywhere with yours please let us know.
cheers
Anita

R/3 - Content server problem

Hello,
we have a SAP R/3 4.7 server linked to a SAP Content Server 6.2 version.
This works ok.
The only problem is that the Content Server saves all the documents + metadata from the documents in one big database.
(With metadata I mean name of the document, author, creation date ...)
How can we change this setup so that the Content Server only saves the metadata of the documents in the database, and that the documents are saved in a normal windows file structure?
Has Anyone done this ?
@moderator : if you think it is necessay to move this subject to another sub-forum , please do so. thank you
Thanks
Bud

First, why do you want to mount R/3 directory onto XI? You have RFC, IDOC and ABAP proxies to connect your XI system with R/3. Why dont you go for any of these options?

Problem with Content Server 4 keystore access on Ubuntu 8.04

Hello,
Setting up the Content Server I encounter this problem with the fulfillment server Status check-up:
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.Error: Problem reading key and certificate from keystore
     com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:201)
     com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
     com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
     com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
     com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
I've created operator.p12 according to the instructions in the Quickstart guide
and placed it in /etc where it is accessible by the server. I used OpenSSL 0.9.8k
for this.
I can use "openssl pkcs12 -in operator.p12 -out file.pem" to view the contents of
the file.
My Content Server fulfillment configuration is as follows:
com.adobe.adept.init1=com.adobe.adept.shared.util.SharedInitialization
com.adobe.adept.log.level=trace
com.adobe.adept.log.file=/var/log/fulfillment.log
com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
com.adobe.adept.persist.sql.connection=jdbc:mysql://127.0.0.1:3306/adept
com.adobe.adept.persist.sql.dialect=mysql
com.adobe.adept.persist.sql.user=ereading
com.adobe.adept.persist.sql.password=********
com.adobe.adept.fulfillment.security.licensesignURL=https://eusigningservice.adobe.com/licensesign
com.adobe.adept.fulfillment.security.keystore.user=operator
com.adobe.adept.fulfillment.security.keystore.password=********
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
com.adobe.adept.serviceURL=http://******.dmz.******.org/fulfillment
Any ideas?
Best regards,
Teemu

for solve this, change this
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
for this
com.adobe.adept.fulfillment.security.pkcs12.file=/etc/operator.p12

Content Server connection problems

SAP Content Server connection problems
I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
I thought maybe the httpd.conf file was wrong so I tried:
Listen 0.0.0.0:1090
In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
I also changed StorageDriver from SAPDBStorage to FSStorage.
I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
Thanks to all for any help. Points will dutifully be rewarded.
David

Hi Henk,
It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
David
Edited by: Dave Hill on Mar 28, 2008 12:00 AM
Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
David
Edited by: Dave Hill on Mar 28, 2008 1:06 AM
Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
/sapdb/programs/bin
Then type
./x_server start
I'm not sure what user it should run under but I started it as the sdb user.
You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
Thank you Henk, I'll call this problem solved and award points.
Edited by: Dave Hill on Mar 28, 2008 2:10 AM

Problem using content from content server in portlet.

Hi all,
I create a JSR286 portlet project, add a content server connection then drag content from those connection to jspx by selected create > document - content presenter.
Problem occur when i deploy the project to portlet managed server.
I'm not sure any mds they required because while deploying the Deploymeny Configuration was poped up to prompt me select mds repository.
I don't know what mds repository they required.
Please help.
Regards.

Hi ngsankar,
Thanks for your reply.
I have no idea about any schema ;(
on the integrated weblogic server i can't deploy too.
Is it possible to use any content from content server in portlet like on portal?
Regards.

Content server Instalation problem.---HTTP 404- ERROR FORBIDDEN

Hello Guys,
This issue is pertaining to Content server instalation with SAP 6 ECC.
Status till date:
1) content server is installed to windows 2003 server.
2) we are currently working in quality server.I have opted a 80 GB harddisk and installed windows 2003 server and also installed Content server to that.
3) i defined New content repository ZDMS_C1in OAC0
Gave appropriate description,
Doc area : Doc magt system
Storage type: HTTP content server
Version no: 0046
Http server 132.147.167.110( this is 80 gb system Ip address)
port number:1090
Http script: Contentserver/contentserver.dll
Physical path: H:usr\sap\ELD\SYS\Global\ (default selection )
i saved and i get every information of created by and last changed by....
Ok but when i test connection it says " HTTP 404:ERROR FORBIDEN".
I get another error when i "SEND CERTIFICATE"
" ERROR IN HTTP ACCESS IFHTTPCLIENT--RECEIVE 1
ICM-HTTP-CONNECTION-FAILED.
Some problem in IIS server but litraly basis team is unable to solve the status.
How to solve this issue.....Help me out in detail.
Regards,
Murali.S

Hi Murali,
Follow two NOTES 212394 & 661852
or
Ensure that PSE (Personal Security Environment) is created directly on SAP system after the system is installed, this is one time activity.
To do this you use T Code "STRUST". You can check with your Senior Basis guy for more.
By default the system's PSE is used to sign URLs. from SAP WAS you can also create your own PSE to sign Kpro URLs
Regards
Rehman

Inbound refinery : Problem to have same administrator than content server

Hi,
I've installed the Inbound Refinery.
During the installation, I asked to have the Inbound Refinery as a proxied server in order to have the administrator of my Content Server as administrator of the Inbound Refinery.
Both applications are on the same physical server.
On the Content Server, an outgoing provider was created to link with the Inbound Refinery.
On the Inbound refinery, an outgoing provider was created to link with the Content Server.
If I click on the "Test" link of the provider, it seems to work.
But, if I try to connect to the Inbound Refinery with the "sysadmin" of my Content Server, it doesn't work.
I noticed also that the role "refineryadmin" was not created in the Content Server database.
I didn't know if it was important. So I created it manually but it does not work.
In the IP filter of the Inbound Refinery, I added the local host + the IP address of the server (do not know if it is necessary).
I followed the procedures to allow manually that the content server manages the refinery authentication, but it does not work.
Anybody has an idea of what could be the problem ?
Any help is welcome
Regards
Pierre

I agree with you.
It is what I did.
The providers defined on the CS and IBR sides were created automatically.
It is why I don't understand why it does not work.
Concerning the Test, when I click on it, I can see "good" in the Connection state column.
But, I'm wondering if it is worth something. Because I put stupid values for the Server instance and the web root and it still indicates "good" (I restarted the CS after provider modification).
Is-it another way to test ?

Content Server 10gR3 installation problem on Windows 7

Hi,
I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
Thank you
Rama

Hi Srinath,
Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
Thanks again
Rama

Installation problem in Oracle Content Server 10g

Hi,
I am trying to install 'ORACLE CONTENT SERVER 10g', as a part of this trying to click on 'Installer.exe' in '/win32'. When i click this installer.exe, it is prompting one COMMAND PROMPT SCREEN and it is disappearing soon. In fact it was suppose to ask language preference as per installation guide.
Dont know how to resolve this issue. please help me out.
Thanks in advance,

pparkko wrote:
With this type of behaviour, you always need to find out the real error.
Try opening a command prompt (cmd) and running the command from the command line.
Then you can see what is going wrong.I have a question, I just upgraded our test 11i database (9i) to 10g (10.2), as a part of that upgraded forms, reports, graphics to patchset 18. Now planning to install 10giAS on appsTier on which forms, Apache and discoverer running. If I install 10giAS in differnet home, how can I get that in to appsTier?, does it mean adapcctl script no longer be used to start webservices?. I haven’t done this before, if my question is stupid, please ignore :).

Problems to access files in Content Server

We recently did a migration of our DMS.
Initially our DMS was located in Sao Paulo and we changed our DMS server to Rio de Janeiro.
We kept the same version of the DMS, the same operating system and the same server configuration.
After this migration we are unable to view the original files (PDFs, DWGs,
etc..) that have been filed in Content Server.
We are receving the following error when we are trying to access file:
c: temp Regal FISPQ.pdf can not be created.
In transaction SLG1 we're getting the 404 Not Found error.
We debugged the program 'SCMS_HTTP_GET_FILE' and received the error file not found.
Can you help me?
Regards,
Sérgio Salomã

Hi Sérgio
I am also facing similar issue. Is your issue resolved? Can you please guide me how did you resolve this issue.
In my case Content Server and Content Repository both are up and running but still I am not able to access the documents.
Thanks

Content Server - character display problem

We have a portal where the content is all in Italian.
When users are adding content in Content Server, the HTML editor shows international characters correctly.
But when they are published, these characters mess up and do not seem to be getting encoded properly.
How can I get international characters to display properly in Content Server??

Hi Andrew,When you add content in Content Server 5.0, the text is encoded in UTF-8 (an encoding of Unicode). Content Server uses Unicode so that content in any language of the world can be added to Content Server. However UTF-8 characters will not be recognized as UTF-8 by most browsers unless you also add a "meta" tag which identifies the data as UTF-8.
The meta tag looks like this:<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8">
Content Server makes adding the tag easy with a feature in the Presentation Template editor. Just "right-click" on the rich-text editor window and select the "Insert HTML shell" menu item. This will give you the proper <html>, <head>, and <body> tags that go with a properly formed HTML page. The meta tag will also be automatically inserted inside the <head> tag.
Regards,Paul Deuter

Moving docs from Content Server 6.30/SAP DB to CS 6.40/MaxDB. Problems?

Hi SAP Experts
A question today about Content Server versions and unicode.
We are planning to extract documents stored in SAP Content Server 6.30 (SAPDB 7.3) connected to ECC5.
And move the documents to be stored in a separate SAP Content Server 6.40 (MaxDB 7.6) connected to a different ECC5 system.
I have seen that the latest MaxDB 7.6 is installed as unicode by default.
The CS 6.30 with SAPDB 7.30 is non-unicode (CODE=ASCII)
Does anyone know of any issues we may encounter with this process?
Logically we are taking a document stored in a Non-Uni database (CS 6.30/SAPDB 7.3) and moving it to be stored in a Uni database (CS 6.40/MaxDB 7.6).
Thanks for your thoughts on this.
Regards Graham

Hi Gregor,
That's what I thought may have been the case. Since I sent this post, I tried bypassing SAPINST by analyzing install scripts, and manually installing the Apache shared library, and other config files. At this point, I can bring-up the content server, but somehow it is not able to analyze the archivelink function from the URL. Finally I gave up, and decided to use supposted Linux distributions, I was trying to avoid initially as those were not free as for such a small component, seemed like overkill.
Thanks for the information.
Regards,
Vishal

Problem while creating Oracle Content Server Identity plug-in in SES

Hi,
I am Integrating Oracle SES with UCM.Both UCM and Oracle SES are installed on the same machine.
I have installed SESCrawlerExport compoent on UCM and also taken Snapshot of Repository.
But when i am trying to create Oracle Content server Identity plug-in in SES it gives following exception.
Inputs:-
1) HTTP endpoint for authentication- http://localhost:100/idc_new/idc
2) Admin User - sysadmin
3) Password - idc
09/10/15 15:06:33 INFO     HTTPThreadGroup-7               URIHandler initialized for the URI http://localhost:100/idcnew/idcplg
09/10/15 15:06:33 INFO     HTTPThreadGroup-7               StellentIdentityPlugin.autheticate: username=sysadmin
09/10/15 15:06:33 FATAL     HTTPThreadGroup-7               EQP-80309: Exception while opening a stream to the URI: http://localhost:100/idcnew/idcplg
09/10/15 15:06:33 FATAL     HTTPThreadGroup-7     EQP-80317: HTTP connect attempt failed after 3 attempts. Aborting connection attempt oracle.search.sdk.common.PluginException oracle.search.plugin.rss.HTTPHandler:getInputStream:302 java.lang.Thread:run:534
09/10/15 15:06:33 ERROR     HTTPThreadGroup-7               EQP-80354: Exception while authenticating user sysadmin: EQP-80317: HTTP connect attempt failed after 3 attempts. Aborting connection attempt
09/10/15 15:06:33 ERROR     HTTPThreadGroup-7     EQP-80317: HTTP connect attempt failed after 3 attempts. Aborting connection attempt oracle.search.sdk.common.PluginException oracle.search.plugin.rss.HTTPHandler:getInputStream:302 java.lang.Thread:run:534
09/10/15 15:06:33 EQP-80353: Exception while validating parameters: EQP-80317: HTTP connect attempt failed after 3 attempts. Aborting connection attempt
Please help me on the same.
Regards,
Nitin

If the error message is correct, it means that no listener is running on port 100.
Where did you get the URL http://localhost:100/idc_new/idc ?
Is UCM using port 100 as it's standard port?
What happens if you try to open this in a browser (running on the localhost machine)?

Problem while creating Oracle Content Server source in SES

Hi,
I am Integrating Oracle SES with UCM.Both UCM and Oracle SES are installed on the same machine.
I have installed SESCrawlerExport compoent on UCM and also taken Snapshot of Repository.
But when i am trying to create Oracle Content server Source in SES, it gives following exception.
13:05:46:562 INFO main Crawling started at 10/15/09 1:05 PM
13:05:47:578 INFO main URL manager connecting to Oracle...
13:05:47:843 INFO main connected
13:05:47:984 ERROR main EQG-31209: No security attribute defined for source (id=70)
 at oracle.search.crawler.WebCrawler.init(WebCrawler.java:631)
 at ImtCrawler.run(ImtCrawler.java:1954)
 at ImtCrawler.main(ImtCrawler.java:534)
13:05:47:984 ERROR main EQG-30249: Crawler process aborted
Please help me on the same.

Thanks very much, Roger. That's very kind of you. The answer was very helpful. I've changed the host and realm accordingly, and altered the Authentication Type to BASIC (previously NATIVE).
When I now try a crawl of UCM, it fails and the log file provides the debugging info listed at the bottom of this message. I've tried to research the exception type and have experimented by altering a few configuration values, but have so far failed to resolve the issue. Are you able to hazard a guess as to what could be causing it?
The parameters I am using are listed below (I have only entered/changed values under the three tabs listed; any fields under those tabs which are omitted below have been left blank):
Source Configuration
Configuration URL: http://<hostname>/ucm/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONFIG&source=feeds
Authetication Type: BASIC
Realm: ucm
User ID: sysadmin
Password: <password for sysadmin>
Max connections: 3
Authentication
Host: <hostname>
Realm: ucm
Username: sysadmin
Password: <password for sysadmin>
Authorization
ACLs controlled by Source
HTTP endpoint: http://<hostname>/ucm/idcplg
Display URL prefix: http://<hostname>/ucm
Administrator user: sysadmin
Administrator pw: <password for sysadmin>
Display crawled version: true
Authorization user ID format: username
Use cached user and role info to authorize results: false
Authentication Type: BASIC
Realm: ucm
Debugging info:
09/10/23 11:29:05 oracle.search.admin.exception.DBSetException
09/10/23 11:29:05 at oracle.search.admin.util.AdminObject.handleBackEndException(AdminObject.java:297)
09/10/23 11:29:05 at oracle.search.admin.users.InstanceManager.isOwnerOfInstance(InstanceManager.java:497)
09/10/23 11:29:05 at schedules.schedules._jspService(_schedules.java:551)
09/10/23 11:29:05 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
09/10/23 11:29:05 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
09/10/23 11:29:05 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
09/10/23 11:29:05 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
09/10/23 11:29:05 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
09/10/23 11:29:05 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
09/10/23 11:29:05 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
09/10/23 11:29:05 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
09/10/23 11:29:05 at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
09/10/23 11:29:05 at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
09/10/23 11:29:05 at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
09/10/23 11:29:05 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
09/10/23 11:29:05 at java.lang.Thread.run(Thread.java:534)
09/10/23 11:29:05 oracle.search.admin.exception.DBSetException
09/10/23 11:29:05 at oracle.search.admin.util.AdminObject.handleBackEndException(AdminObject.java:297)
09/10/23 11:29:05 at oracle.search.admin.users.InstanceManager.isOwnerOfInstance(InstanceManager.java:497)
09/10/23 11:29:05 at control.error._jspService(_error.java:543)
09/10/23 11:29:05 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
09/10/23 11:29:05 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
09/10/23 11:29:05 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
09/10/23 11:29:05 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
09/10/23 11:29:05 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
09/10/23 11:29:05 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
09/10/23 11:29:05 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
09/10/23 11:29:05 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
09/10/23 11:29:05 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
09/10/23 11:29:05 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
09/10/23 11:29:05 at java.lang.Thread.run(Thread.java:534)
Thanks again.

Content server problem

Similar Messages

Maybe you are looking for