Content Status Stuck "In Progress"

I had this error before, and installing the hotfix http://support.microsoft.com/kb/2828900/en-us fixed the issue. However, last week the issue returned. At the time, nothing
had changed. I have since installed CU4, then CU5. These servers are updated monthly, but had not yet updated when this began.
When viewing the Content Status, the Status is “Waiting for Content.” However, in the Asset Message Summary, the description is “Distribution Manager successfully processed package…”
OSD task sequences are now not able to complete due to the Configuration Manager Client Package being in the same state (due to the CU5 client update).
Deployments such as Programs and Updates are completing successfully.
Interestingly, I was able to distribute NEW content (SP1 CU5 - x64 client update) to a Distribution Point Group (which includes 4 of 13 DP’s). So maybe this issues only applies
to REDISTRIBUTING content.
PkgXferMgr.log does not show anything unusual
Distmgr.log shows a recurring attempt to update a package which was removed and subsequently redistributed for testing purposes, but other entries appear to process normally.
Found package properties updated notification for package 'KS100005'
Sleep 30 minutes...
Found notification for package 'KS100005'
Package 'KS100005' (priority 1) is already in queue.
Used 1 out of 7 allowed processing threads.
Package 'KS100005' is found in active queue, will try it later
Sleep 1753 seconds...
Sleep 30 minutes...
My configuration:
Windows Server 2008 R2 SP1
SCCM 2012 SP1 CU5
SQL Server 2008 R2 SP1
1 Primary Site and 12 Distribution Points
Original Install Date: 4/13/2012
I have Googled the following and read most results on the first two pages:
In progress - Waiting for Content
Package (priority 1) is already in queue
Package is found in active queue, will try it later
distribution manager successfully processed package waiting for content
The content status of a package is stuck in "In progress - Waiting for Content" status in System Center 2012 Configuration Manager SP1
Maybe someone has some fancy PowerShell or SQL commands I can run. (My SQL skills are limited).
Jamie

Thanks Torsten. I've read many of your successful replies over the years, and now you're answering one of my questions! Actually, the first question since I've usually found the answer.
Yes, I have redistributed the packages that are giving the inaccurate status messages.
To get a current log, I redistributed the configmgr client (KS100002). The description now reads "Distribution Manager created snapshot for content Configuration Manager Client Package successfully." However, the Content Status is still "Waiting for
Content - In Progress."
distmgr.log
Taking package snapshot for package KS100002 from source \\svsccm1.nazdar.com\SMS_KS1\Client
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:53:50 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:53:50 PM
1184 (0x04A0)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
7/24/2014 1:53:54 PM 6492 (0x195C)
Found package properties updated notification for package 'KS100005'
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:00 PM
3520 (0x0DC0)
Found notification for package 'KS100005' SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:05 PM 3520 (0x0DC0)
Package 'KS100005' (priority 1) is already in queue.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Used 2 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Package 'KS100005' is found in active queue, will try it later
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:05 PM 3520 (0x0DC0)
The size of package KS100002, version 11 is 187015 KBytes
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:06 PM
1184 (0x04A0)
CreatePackageSignature() called for Package KS100002 with version 11 with source as '\\?\UNC\svsccm1.nazdar.com\SMS_KS1\Client'. KeepUnpackedSignature = 1
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:06 PM
1184 (0x04A0)
Successfully created RDC signatures for package KS100002 version 11
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:10 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:10 PM
1184 (0x04A0)
Creating hash for algorithm 32780 SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:14 PM 1184 (0x04A0)
The hash for algorithm 32780 is EF26808AB6F9B0291F4E0999BB09F90DA9AAEF3C334BF681A0D8CAAC226C5A39
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The RDC signature hash for algorithm 32780 is 9DF7DE9375172B8E07724E5985B5D2142839AC135D7ABE6F246203E89FA6AD00
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
STATMSG: ID=2376 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=svsccm1.nazdar.com SITE=KS1 PID=7472 TID=1184 GMTDATE=Thu Jul 24 18:54:14.344 2014 ISTR0="KS100002" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="KS100002"
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=KS100002, Version=11, Status=2376
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The source for package KS100002 has changed or the package source needs to be refreshed
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Adding these contents to the package KS100002 version 11.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The Package Action is 1, the Update Mask is 32 and UpdateMaskEx is 0.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Use drive C for storing the compressed package.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Successfully created/updated the package KS100002
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=svsccm1.nazdar.com SITE=KS1 PID=7472 TID=1184 GMTDATE=Thu Jul 24 18:54:19.703 2014 ISTR0="KS100002" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="KS100002"
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
Set share security on share \\SVWSTSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:21 PM
1184 (0x04A0)
Set share security on share \\SVTEISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:25 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:27 PM
1184 (0x04A0)
Set share security on share \\SVPENSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:28 PM
1184 (0x04A0)
Set share security on share \\SVMICSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:34 PM
1184 (0x04A0)
Set share security on share \\SVMIASCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:36 PM
1184 (0x04A0)
Set share security on share \\SVMEXSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:41 PM
1184 (0x04A0)
Set share security on share \\svmansccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:50 PM
1184 (0x04A0)
Set share security on share \\SVGSISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:57 PM
1184 (0x04A0)
Set share security on share \\SVGRNSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:59 PM
1184 (0x04A0)
Set share security on share \\SVCINSCCM.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:55:03 PM
1184 (0x04A0)
Set share security on share \\SVCHISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:55:06 PM
1184 (0x04A0)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
7/24/2014 2:23:59 PM 6492 (0x195C)
pkgxfermgr.log- no activity

Similar Messages

Fusion Absence Status stuck 'In Progress'

Hi !
I'm trying to complete a full cycle of recording an absence.
I've created the accrual plan, the absence type and enrolled employees in accrual plan.
At employee level I added an absence ( of the type created before ) and is stuck in status 'In progress'.
In the Absence Type, section 'Display features' I selected the options as below.
My questions:
1. Where and how these Display Features can be used ? for 'Approval Processing' Employee level 'Enabled' does it mean that the Employee can select the Approver ?
2. What is the maening of 'In progress' status ?
regards,
Gabriela

Hi !
I'm trying to complete a full cycle of recording an absence.
I've created the accrual plan, the absence type and enrolled employees in accrual plan.
At employee level I added an absence ( of the type created before ) and is stuck in status 'In progress'.
In the Absence Type, section 'Display features' I selected the options as below.
My questions:
1. Where and how these Display Features can be used ? for 'Approval Processing' Employee level 'Enabled' does it mean that the Employee can select the Approver ?
2. What is the maening of 'In progress' status ?
regards,
Gabriela

Leave with approval status ''Work in progress''

Hi,
I try to delete or complete the leave with approval status ''Work in progress'' and there is no way to do that .. can anybody help .
This issue happened when i request annual leave and the session expired .. i login again and i found the request stuck at absence summary and i can't do any thing even deleting.
snapshot of the issue:
http://www.2shared.com/photo/B2F8Aysg/work_in_progress_leave.html
Thanks in advance

Hi,
Yes i know its not should be disabled at site level i did that on test envroment .
i tried to put it at user but its not possible
after i put the profile on value 'Yes' the delete and update columns appeared at absence summary with warning massege and i can delete the Leave with approval status ''Work in progress'':
http://www.2shared.com/photo/QqRfjReY/Warning_mass-2.html
and when i try to create new leave gave this error massege:
http://www.2shared.com/photo/LL1sU9xB/Warning_mass-1.html
can you guide me how can i know the earlier personalization done on the absence page ??
thaks alot for your helping

My Process status is in progress but all the subprocess are completed

Hi,
I have a problem, i started a process with 4 subprocess. One of the Subprocess didn't finish its activity and it's status remain "in progress".
In the context data of subprocess i didn't see any information. Now if i try to suspend or cancel it i get this error message:
Error during the process.Number and instance Id's of the processes which can not be suspended
how can i delete it from Process istance?

I tried to suspend or cancel the process but i can't do it.
the system told me the error in the first post.
if i go in the history of process i have this log:
10-gen-2011 16.10.42 Application result Web service operation taskRun of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation taskRun of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Application result Web service operation getTaskKey of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation getTaskKey of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Process initiated Processo 'New Pool 0' iniziato Control flow
10-gen-2011 16.10.42 Data object created Data object TextVariables has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Administrators has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Auto_PotentialOwners has been created Data flow
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object Auto_ExcludedOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_PotentialOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_ExcludedOwners has been updated
with no error, but for now the subprocess still in progress and it's don't finish.

Workflow: Even if PO is released the log shows status as 'In Progress'

Dear All,
I have created custom workflow for PO approval procedure. I have 3 step approval process and have specified same User ID as agent to all 3 levels. Now I am facing below issues in my workflow
1) It is getting triggered twice, I have specified only one start condition as RELEASESTEPCREATED, why is this happening?
2) If I execute the workflow from SWBP for release, even after release of PO the step shows status as 'In Progress' in SWIA, its not going to complete status. Hence not going to next step.
Please guide me on the above issues.
Thanks and Regards,
Aniket

If you are using standard Workflow WS20000075 on releasing the PO a notification workitem is ent to the Initiator which displays the PO. On executing this workitem the workflow instance get completed. This is a standard solution if you need to change it then copy it and customize it accordingly.
Thanks
Arghadip

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.

Content status shows some DP's as unknown

content status shows some DP's as unknown, I checked the DP's and the package was successfully updated and if I drill into view status everything appears correct except the pie chart of my DP's shows most as unknown
Rob Szarszewski

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Object COntent information for deleted packages still visible in content status

Hi,
I have a situation in our prod. SCCM site where deleted packages still have their object content information visible in Content status in SCCM. Has anyone faced the same issue?

Hi,
Check distmgr.log
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Compliance on content status not correctly updated on CAS

We have a new SCCM 2012 R2 CU1 environment with a CAS and multiple primary sites.
We noticed that the compliance percentage
for some applications are not correctly (50%) updated on the CAS for a site with a primary site server with a DP role and a site system with a DP role. It is shown correctly (100%) on the primary site server.
On the CAS you can see the message "detail will be available when server finishes processing the messages" on the content status asset details for some applications.
We have verified that these applications are distributed. The compliance percentage is corrected if we go to an application on the CAS and redistribute it. It only takes a second to finish. So it looks like a bug on the CAS.
Since we are doing our proactive checks on the CAS, it is important for us that the information is shown correctly. We have rebooted the CAS with no result. Also we have all updates installed. We have not found a solution for this yet.
Is there anyone else with this issue? What can we do to troubleshoot or fix this issue?

Hi ,
As it is related to System Center 2012 Configuration Manager, you can create a new post on the configuration manager forum to ask for more information:
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
More experts will assist you, then you will get more information relation to your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Configuration Manager 2012 SP1 CU4 Console - Content Status very slow

I have a SCCM 2012 SP1 CU4 environment running.
When using the console and viewing the Monitoring / Distribution Status / Content Status it took about 10-15 minutes to get the information.
How can this be speed up a bit ? By adding additional indexes in SQL ?
Any tips, hints are very welcome.

Hi,
Have you seen this previuous thread on the topic?
https://social.technet.microsoft.com/Forums/en-US/7935143e-21a8-4770-83bf-7e1938d9defd/configuration-manager-2012-content-status-slow?forum=configmanagergeneral
I would run the script from Ola that reports back on the indexe defragementeation and what I normally see as well is that more than one TempDB file increases performance greatly. It is most likely covered in the session mentioned above by Tim.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

I bought iphone on donedeal.ie it had no icloud account on it. i erased content and settings as previous owner had photos on it.icloud appearing after erased content. Stuck on activation screen now

i bought iphone on donedeal.ie it had no icloud account on it. i erased content and settings as previous owner had photos on it.icloud appearing after erased content. Stuck on activation screen now
what can be done?

http://support.apple.com/kb/PH13695
Theres no issue with the mother board. It's the activation lock look at the link I provided.
There is nothing you or Apple can do without the previous owners icloud information.
Like I already stated you have a paperweight.

HT4623 update stuck in progress bar while restoring ios 7

iphone 4s restoring ios 7.0.4 tried 20 times and keep getiing error 14 and stuck on progress bar help please ??
if needed i well post error log

It's updated to the newest version.

Deployment status shows stuck in progress, no advertisement or package ID in any client log

I am trying to deploy an applications to a remote machine. The application is distributed to the DPs and has been successfully deployed to at least one computer on the LAN. The deployment status for the machine is stuck on the In Progress
tab, Category as In Progress.
The content has not downloaded to ccmcache, and I can't find any reference to the application or package ID in any of the logs. I don't know what to look at next that might help. Any help is much appreciated! Thanks,
Jeff

How about locationservices.log? It runs through this every 10 minutes, which is both more often and quite different from what I see in my laptop's locationservices.log (granted I'm on the LAN).
Refreshed security settings over AD
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
No security settings update detected.   LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Retrieved MP [oursccmprimary] from Registry   LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Attempting to retrieve lookup MP(s) from AD    LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Lookup Management Points from AD:   LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'N'
LocationServices
12/3/2014 3:50:06 PM
5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'N'
LocationServices
12/3/2014 3:50:06 PM
5160 (0x1428)
Retrieved lookup MP(s) from AD
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Attempting to retrieve default management points from lookup MP(s) via HTTPS
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Default Management Points from MP: LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
LSUpdateInternetManagementPoints   LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Internet Management Points from assigned MP:
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
LSUpdateInternetManagementPoints: Successfully refreshed internet MPs from MP oursccmsecondary.ourdomain.lan.
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Persisting the default management points in WMI
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Default Management Points from MP: LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Persisted Default Management Point Locations locally
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Attempting to retrieve local MPs from the assigned MP LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)

[SCCM 2012] Content distribution to DP's successfull status then in progress

Hello,
Had 70 DP on my infrastructure. A distribution group with around 200 contents is created and 70 DP are link to this DP group.
Every day I check the content distribution status, and the global pourcentage go up and down.
IE: Monday a DP is fully synched and the day after 10 contents are "in progress" and I have this thing on all DP's. Looks like that content distribution are done again an again....
Two weeks ago I had 15 DP fully distributed and now only 3... and no changes on the contents...
So I don't know what is the cause of this. Any idea?
Thanks in advance

We seem to be experiencing this issue in our environment and I just want to try and understand whether this is a bug that only reflects on status messages, or if the status messages reflect on the actual content, and thus, application and task sequence deployments?
I believe this is becoming a serious issue.
When the "Content is being distributed to the distribution point" messages first started surfacing, we noticed that certain packages (but not necessarily all), were being sent to all DP's, even when some of those packages weren't assigned to that
particular DP or the Boundary Group set up for content to that DP (we are viewing this in SCCM 2012 Monitoring | Distribution Status | Distribution Point Configuration Status, and the Details tab.) The biggest issue right now is that this recurrence of packages
redistributing, is causing task sequences to fail from distribution points that didn't actually have content redistributed to them.
And yes, validating content individually on those "in progress" packages does remediate the status message and eventually green light the DP. But validating content every time a DP is stood up, or content is distributed is becoming painstaking.
And scheduling Content Validation to occur more frequently only seems to be a band-aid that will not always help.
Is there any additional information on this malformed status message that can be provided? Is Microsoft working on a fix? We have not yet upgraded to SP1. Can anyone confirm the issue is resolved with SP1 or later, or if a hotfix exists to address the problem?

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

Content Status Stuck "In Progress"

Similar Messages

Maybe you are looking for