Contract and billing question.

I'm leaving to Basic Combat Training in mid September and I'm getting a phone beforehand so I can keep contact with people when they start allowing phone time, and so I can keep contact through Advanced Individual Training. I don't have a job so I've been saving money for awhile now.
I'm getting an iPhone 5, so up front payment to start a contract is $199.99. The bill will be $110 monthly with the plan I've chosen. Now, I have enough money for the up front payment and the first bill, so I'm wondering, if I start my contract at the start of September 2013, when will my first and second bill be due?
I'll start getting paychecks around the end of September/start of October and since I have enough money for the upfront payment, and the first bill, would the first bill be due at the end of September, and the next at the end of October? If this was the case, I'd be fine because my bank account would have my BCT pay already going into it so by the time the 2nd bill arrived I would already have more than enough money in my account from training to pay for it thereon out. However if the billing cycle is different (or if I have to pay the upfront cost + the first bill at the same time upon opening the account) then I'd need to put the billing on someone elses card then pay them back after my training. 
Thanks, answers will help a ton.

Hi voidn0ise,
These forums are dedicated to Residential products and services offered by Verizon.
For help on Verizon Wireless issues, please post your topic on the Verizon Wireless community.
Thank you.

Similar Messages

  • Different amount in Contract and Billing document.

    Hi All,
    We have a issue here, need suggestion.
    We have a contract which has a billing plan. We have maintained monthly plans with a fixed amount.
    Say we have $ 1000 in the contract, but the billing has been created with $ 900.
    So you see the amounts are different in contract and billing document.
    We have checked there are no recent pricing changes or any such changes that will have such effect. The invoice is created in May.
    There were pricing changes in March but they had been corrected in March itself.
    Let me know if anybody has faced such issue and where may be the issue.
    Regards,
    SB
    Edited by: Satish Bharambe on Jun 2, 2011 11:43 PM

    You would have to cross-check the Pricing at Item level in Contract & Invoice. Hope , it would help you to check the Base Price or some other Prices / Discounts.
    Best Regards,
    Ankur

  • Predefined Rate contract and Billing

    MM Gurus,
      Can we create any predefined rate contract. My client have yearly based rate contract with vendor. In this rate contract they have segricated the  amount for  each activity. for example - change of motor -100 rs, change of pump 200.
    Whenever the service contractor done the job they have raises the bill for the activity. Then bill should be verified with the job and it should be accounted.
    kindly suggect me how i can capture this activities in plant maintenance also.
    Thanks and regards
    G.Sathish

    Hi,
    Satish you can create service PO based on PR generated out of PM order
    Use item category D and account assignment category K in service PO and maintain these services as either service masters or text items in PO
    You can enter service entry sheet based on activity completed (services rendered) by service provider the rate will be as per PO
    Thanks
    Diwakar

  • Canceled service before end of contract and billing cycle. Being charged an extra month!

    Hi. I have been a loyal Verizon wireless customer for a long while, but have had such a bad experience in the past year (where I have paid bills as high as $700.00) that I decided to cancel my services and move to another network. My billing cycle runs from 14th of the month to 14th of next month, typically. I have autopay set up to pay my bills and it deducts money for the following month on or around 6th of that month.
    I ported out my verizon number to a service on 4th of this month and since my verizon account got immediately closed, I called up verizon to find out about the ETF and final bill. I was surprised to find that I had to not only pay ETF but also pay the bills for the next month (which I am not using as I canceled before the Feb 14th!). Is this common practice? I feel so cheated. I feel its a sneaky move to squeeze that extra amount of money from me!

    shiphone wrote:
    There were many options to choose from when my contracts ended every two years, and I stuck with VZW. The CSR whom I spoke with mentioned its a Verizon policy. She did not talk about billing error and mentioned to avoid paying this extra months bills I must have canceled my service before the bill was generated for the following month! I find that conniving.
    But thank you for your response. 
    I'm sure you stuck with Verizon because they were giving the best service for a reasonable price. That's not loyalty. That's just being a smart consumer. Being loyal would be sticking with Verizon when other carriers where offering equal or superior service for less money. And in that case that may be being loyal but it's also kind of stupid.
    As far as your bill my new bill is generated about 4-5 days after the end of my billing period. So if your billing period ended on the 14th the new bill would be generated on the 18th. Verizon bills in advance so your bill that got generated on the 18th of January would be from January 15th to February 14th. Which would be due around Feb 6th. So you were billed correctly.

  • Table link between contract document and billing document

    Hi,
    Please let me know the table link between contract data and its billing plan nnumber.
    Regards,
    bhaarathi.

    VBKD is the Table name
    if Ordertype "G"  <--- that means It is a contract
    From VBAK and VBAP you can get the Contract Details for the Order Type "G"
    Go to Table VBKD, with the contract and get the billing plan .
    FPLNR <--- is the Billing plan
    Here you get the relation Between Contract and Billing Plan

  • Question regarding cancelation of wireless contract and signing a new one

    Hi,  I have a question regarding my contract. My Cell was stolen 2 days ago ( Iphone 5)  had it for about year and 2 months. now I have a dilemma when it comes on getting a new device. the rep told me she can offer me some S... phones for over $200 as a replacement or I to look up Amazon; Ebay and craiglist. I also don't want to pay a retail price for a brand new device. So I was thinking of cancelation of this contract paying the fee and signing up a new contract with a new device like Iphone 5s or Samsung Galaxy. My question is, are there any waiting periods for doing such a thing, or I could do it at the same time, ditch old contract and sign for new one.

        I really want to take a closer look at your options, Filip.M. We definitely wouldn't want to see you cancelling out all the great history you have with us already. I have sent you a follow request here in the forum. Please access https://community.verizonwireless.com/actions to accept my request and follow me back so you can send me a private message with your name and mobile number so we can get started.
    Thank you
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • TS1424 My Apple ID has been disabled, it won't let me updated my previous purchases. No reason for why it has been disabled or how to enable it again. I reset my password, security questions and billing info. Nothing- Anybody has seen this before?...

    My Apple ID has been disabled, it won't let me updated my previous purchases. No reason for why it has been disabled or how to enable it again. I reset my password, security questions and billing info. Nothing… I even called Apple SUpport 1-800 # and they said they can't help me...Anybody has seen this before?...

    You need to contact itunes support.
    http://www.apple.com/support/contact/
    There is NO telephone support for itunes.  Use the link above.

  • So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

    So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

    This is a user to user technical support forum.  It is not our responsibility to convince you of anything.
    Do you actually have a technical support question?  If not, post your question on a blog or somewhere more appropriate.
    Best,
    GDG

  • Listing and Billing Currency Question...

    This is what I'm getting on my listings Review your listing  Listing Currency: U.S. dollarBilling Currency: Canadian dollar If you list on Ebay.ca and your listings are in $US and you pay your Ebay fees by Paypal in $US...Is this the way you should be set up? It seems to me there would be a currency exchange advantage if your Billing Currency was in $US, not $CAN.I'm not sure what would be best...

    Listing currency and billing currency are independent from each other Listing currency on eBay.com is always in US$ Listing currency on eBay.ca can be either US$ or Cdn$,  at the option of the seller The billing currency is selected by the seller and can be changed once a year. http://pages.ebay.ca/help/sell/billing-currency.html If your billing currency is in US$ and you list in US$, then the fees charged by eBay are exactly what you see on the fee schedule; If your billing currency is in US$ and you list in Cdn$, then each fee will be converted to US$ using the current conversion rate (determined daily by eBay).  That conversion rate does not include any currency conversion fee.  For example, if you have a Cdn$1.00 fee today, your account would be charged US$0.77 If your billing currency is in Cdn$ and you list in Cdn$, then the fees charged by eBay are exactly what you see on the fee schedule. If your billing currency is in Cdn$ and you list in US$, then each fee will be converted to Cdn$ using the current conversion rate (determined daily by eBay). For example, if you have a US$1.00 fee today, your account would be charged Cdn$ 1.29 How to select the right "billing currency"?  The "right" answer to that question depends on each seller: what currency is used for listing?  where are the proceeds kept?  does the seller have a US$ denominated credit card? etc... Personally I list in both US$ on eBay.com and Cdn$ on eBay.ca.  That is what works best for me.  I also pay my eBay fees by credit card (never PayPal) as I earn AirMiles every month with my credit card and I find it a lot easier from a bookkeeping point-of-view.  That is what works best for me. Good Luck

  • Partner in service contract and ibase

    Here is a data migration scenario, migration service contract from legance to crm:
    1. warranty data and sold to partner will be migrated to ibase in crm
    2. legancy contract will be migrated to crm contract, which also contains a sold to party
    So my question is whether there is a dependency about sold-to party between service contract and ibase,
    - for example., here is ibase contain product: A,B,C, but when create a contract for product D, which does not exist in a ibase, so whether this contract can be create, whether it can look up the if product exist in ibase according to sold to party,
    And whether it can prevent to create new contract for D?
    Many thanks.

    Hi Nagaraju,
    First of all, you can bill Service Contract and Service Order differently. This is because you may wish to charge contract fees irrespective of whether service occurs or not.
    Secondly, while maintaining DIP profile, you can use different material from the one used in contract. Just make sure that it gives explanation as to what service was performed so that customer will understand the invoice.
    DP90 will generate Debit memo request. You will need to create billing document against this using VF01.
    When you settle the service order (KO88), it will be settled against service contract.
    Please let me know if you need any further information.
    Regards,
    Aaditya.

  • How to link Sales Order with Service Contract and then with Install Base?

    Hi Friends,
    1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
    2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
    3) How can we create AR invoice from Service Contract?
    Please let me know if anyone has idea on this.
    Thanks in Adavance,
    Vara

    Dear Sid,
    Thanks for your promt response.
    Let me explain you what I did.
    1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
    2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
    3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
    4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
    5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
    Here I have few doubts:
    1) Are the AR invoice and Service Contract Billing Invoices same?
    2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
    because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
    3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
    Thank you so much for your helpful answers.
    Regards,
    Vara

  • Automatic Delivery, PGI and Billing

    Hi SD gurus,
    Will appreciate the feedback on this. In standard SAP, upon creating and saving of sales order, we need to create outbound delivery ( and do picking for picking-relevant item ), then do PGI. Upon that, create billing document and save.
    My question is, if upon creating and saving of sales order, I want to make the subsequent processes runs automatically, how can it be done ?
    The triggering part from saving the sales order - can that be done via userexit ? If so, which userexit can I look into ?
    For the automation of delivery, PGI issue and billing, are there any BAPI or userexit that can accomodate that ? If so, can anyone be kind enough to pinpoint to me how to locate it and if possible, what are the key things I need to look into ? I believe it can be done via BDC as well but I'm not too sure how to go around it.
    Really looking forward to some valuable feedbacks here. Many thanks way in advance.
    Warmest Regards,
    Janice

    Hi Janie,
       You can also create a BDC program where everything would be created on its own.You can take the help of ABAPer for this purpose.
    It will also do the availability check and in your program you can create the logic that PGI would be done only if the confirmation date in the schedule line is today's date.
    We ourselves have created the same scenario in our own project and it has worked really well.
                                               OR
    Configure the sales order such that the delivery is created on saving the document. This can be achieved in sales order type.
    Create a Batch job which does the subsequent steps.
    On creation of delivery, use the function module 'ws_delivery_update' or 'SD_DELIVERY_UPDATE_PICKING_1' or 'BAPI_OUTB_DELIVERY_CONFIRM_DEC' [take the Help of an ABAPer] to perform the PGI. In the end use the transaction for billing due list to create the billing documents.
    Reward points if it works.
    Regards
    Karan
    Message was edited by:
            Karan Bhatia

  • I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.

    I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.

    If you were instructed to call them, then that's what you should do. They will probably need to verify your identity before helping you with the security question.

  • Can't renew contract and upgrade phones 1 1/2 days early?

    Last Saturday I tried to renew my contract and upgrade mine and my wife's phones to the Galaxy S5 at the Tunnel Rd, Asheville NC location. My official contract renewal date for both phones was the following Monday, but due to the nature of my work, and the fact that I have to schedule said work around my wife's cancer treatments, I rarely am able to make it to any business within business hours. I had hoped that renewing 1 1/2 days early would be feasible, but upon asking at the Verizon store, I was told by the young lady "assisting" me that, no, they were very strict on not allowing early renewal, and that I should come back Monday. So now it seems that i have missed the buy one get one free deal? That would be very aggravating in and of itself, but imagine my surprise when a friend said no, that you could renew and upgrade 30 days before the official date, and he called customer service in my presence and proved it. So was I pushed out of the store because they were busy, or were they just hoping that I would come back on Monday and pay the normal price for both phones? Is there any way that I can still get the bogo deal? Extremely unhappy with Verizon at the moment, I wish there were more options in the rural are in which I live.

    The store service is no good for any situation even MILDLY complicated. We upgraded my husband's phone 3 days early because he was deployed and coming home three days prior to his renewal date and his previous phone no longer worked. He did it over the phone but the order mistakenly got cancelled. Went into a store to try to get it handled and they will literally tell you "We work on a different system that the customer service center." I don't even know what that means, but basically, unless you are starting new service, paying a bill, or buying accessories, they will be of no help. I went home, called back into customer service and got it situated. Had you called in, I am almost certain they would have upgraded you. Unfortunately, as someone has already stated, if the deal is over, they most likely will no longer honor it.

  • Goods Movement and Billing status at header level

    Hello,
    Im new to this topic and have some very basic questions
    Will WBSTK field be updated with goods movement status for a given sales order number in VBUK table ?
    Similarly, will FKSTK/FKSTK or BUCHK will be updated with billing status ?
    I know that for a given delivery document number, I can track the status at the item level.
    But my aim is to know the overall goods movement and billing status at the order header level.
    Any clues will be of great help.
    Thanking you in advance.
    Regards,
    Preethi

    Hi Preethi,
    A sales order does not determine a billing status for delivery related billing, field VBUK-FKSTK is only determined for delivey.
    Just because of this, you will not find billing status field in VA03 -> goto header;
    you could only find billing status field for delivery in VL03N -> status overview.
    Best regards,
    Crystal Lin

Maybe you are looking for