Control/Default values in Service Notifications and Service Orders

Hi all,
When in transaction IW52 and IW32 I know you can maintain a set of default values for when you are either creating a Service Notificaiton and/or a Service Order.
My scenario is as follows:-
User 1 has a set of default values and it contains Work Centre A. User 1 then creates a Service Notification.
User 2 has a set of default values and it contains Work Centre B. User 2 then reviews the Service Notification created by User 1 and wishes to create a Service Order.
When User 2 creates the Service Order, the default value for the Work Centre is using User 1's Work Centre (Work centre A) and not their own Work Centre of Work Centre B?
What is stopping User 2 picking up their own Work Centre of Work Centre B when they want to create a Service Order from a Service Notification?

Gary,
The order takes its data from the notification (which got it from USER1's defaults).
What you need to do is change the notification work centre to that of USER2's preferred default value.
There is no standard setting for this. However, all is not lost. It may be possible by misuing one of the order user-exits
PeteA

Similar Messages

User-exit for default values in service order

Hi,
i use EXIT QQMA0025 (EXIT_SAPLIQS0_017) to set some default values by creating
a service notification.
Is there some exit or badi to do the same for service orders. I don't want to use TPMUS.
Regards, Dieter

I create this thread in SD, because
i don't get any answers.
Regards, Dieter

[svn:fx-trunk] 13129: ASDoc bug fixes, and added a note that Scroller no longer has a default value of hasFocusableChildren ="false" and focusEnabled="true"

Revision: 13129
Revision: 13129
Author:   [email protected]
Date:     2009-12-21 13:50:37 -0800 (Mon, 21 Dec 2009)
Log Message:
ASDoc bug fixes, and added a note that Scroller no longer has a default value of hasFocusableChildren="false" and focusEnabled="true"
QE notes: -
Doc notes: -
Bugs: - FLEXDOCS-386
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDOCS-386
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/VideoDisplay.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/events/VideoEvent.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/core/SpriteVisualElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/interpolation/MultiValueInterp olator.as

I had a while ago similar problem with USB memory stick. At the end, I don't know why, just formatting it using WinXP helped me.
S-
Last edited by StenM (2011-07-22 17:56:32)

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

Default values for service provider in transaction TRIP

Hello Gurus...
We are implementing travel management and I have a problem... here's the scenario
Tha gl account that should be used for a specific trip recepit depends on the following:
The expense type
The company specific type of trip
The Employee grouping for Travel Management
What we have done so far is :
create a service provider for every combination of trip_type/employee_grouping
create entries in V_T706B4 for every valid combination of expense_type/service_provider
configure transfer to accounting
With this configuration the gl account is determined correctly. However this way of solving the situation means that the user must enter the service provider for every recepit entered in the expense report. Given that in our particular scenario the service provider depends on data that has been already entered (type of trip) or that "the system should know" (employee grouping), users are not happy about having to enter the service provider.
¿Is there a way to assign default values to the service provider, and would it be possible to code/configure somewhere how to set those default values? I tried doing it through the trip schema, but apparently it is not possible to set a default service provider that way. I also tried setting the values in the user exit (b4 assigning trip number) but this doesn't work since the user exit is called after the standard validation. I also tried implementing subroutine USER_EVAL_RECEIPT, but this doesn't seem to work in transaction TRIP.
Thanks in advance for any help you may provide!
Juan Ramon

Hello AP.
Thogh your suggestion is helpful (I might use profile parameters somewhere else) thre is no parameter for the field I need. In any case It wouldn't have solved the issue completely, since the default value I need depends on both the employee(user) and the type of trip that's selected.

Link Between Service Notification and Sales Order

Hi All,
In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated without updating the VBFA Table or is there any other table gets updated for this flow.
Please guide me.
With Regards
Vinu.N

Hello Vinu
For one Sales Order # figures in Notification header table- VIQMEL-VBELN.
Similarly Notification # figures in Sales Order Header table- VBAK-QMNUM
That is a solid link right there.
I Also guess technical objects like Equipment, Serial number also form link between the Sales and Service Documents.
Also check out the logic in document flow program RIBELF20, may be it will give you the clues to the problem.
Hope this helps.

"File Path Control" default Value

Hi - How do we set or change the default value for "File Path Control" (Control --> String & Path ---> File Path Control)?
I typed the default path into the control field on the front pannel and save the VI file. The value gone when I reopen the file.

jimmy.chretien wrote:
[...] difference between Not a path and Empty path... Why?
Not a Path is a specific value for the path (<Not a Path>).
Developers should use this to prevent situations in applications, where a user has to select a path before performing an action (e.g. saving a file). If the user skips the path selection, the application still has "Not a Path" and can prevent errors and tell the user to select the path (error handling!).
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Plsss help me: how to set default values in html:file and html:radio

Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

Programmatically determine control default value

Hullo,
I'm trying to figure out a reasonably supportable method for detecting whether a sub VI's input is wired.
I'm using the approach of setting a nonsensical default value for the control, then comparing the control's current value to a constant of this value. If they're not equal, then I pass the control's value into my shift register. If they are equal, I retain whatever value was previously in the shift register. In this instance, I've created an action engine that allows me to update status and progress bars.
This works because my progress counter is a U8 which I will only ever write 0-100 to, so I can set my default to something outside this range (here, 255) for my comparison. Something similar should be relatively simple to understand and reuse in the future.
However, there's a dependency on someone setting the default value for the control and then updating the comparison constant to match. My question: is there a method for checking the default value of a control programmatically in order to remove the coupling? I realise that any method would invariably be slower in terms of execution, but this is merely out of curiosity.
CLD
Solved!
Go to Solution.

Thanks tst.
I was thinking more of future expandability and use rather than maintenance.
The default value method works for any input for which you can define a default value, so it can be used for anything your imagination stretches to. This may be a trivial example, but I can foresee someone in the future copying the architecture and ignoring the documentation.- but that's my problem, not anyone else's!
As I mentioned, it was mostly out of curiosity rather than an actual wish to use it. I'll have a look at the default value via scripting for posterity, but if you were going down the scripting route you could also use the Terminal Checker method. This doesn't work in the RTE either, though.
Thanks again!
CLD

How to change default value of a parameter and LOV attached to a parameter

Hi All
I am new to discoverer reports and I need to accomplish the following tasks:
1. Need to change the SQL query of a discoverer report
2. Need to change the default value of parameter ( from constant to current month). In the discoverer plus responsibility when I open the report and go to tools>>parameter>>edit
I can see the constant default value given there. On the right hand side there is a drop down which says 'Value'. I guess if i need to put a SQL as defaul value I need to change the drop down to sql or something and then put the SQL. Problem is the drop down is froezen and I cannot change it.
Even if I try to create a new parameter/report.
3. Need to change the LOV associated to the item on which the parameter is based.
I have the discoverer plus responsibility attached to myself and do not have the discoverer administrator tool (desktop developer tool like forms 6i). My questions are:
1. Can I change the SQL query by using discoverer plus responsibility or do I need discoverer administrator tool?
2. Any help on how to get the default value from an SQL query? currently it is a constant value.
3. Is there any way to figure out is the LOV is madeup of fixed constant values (like independednt value set) or they are fetched from some sql query(table validated value sets)?
Any pointers/solutions will be highly appriciated!!!
Thanks in advance.
Thanks and Regards,
Shashank

HI,
Need to change the SQL query of a discoverer reportThe discoverer generate the SQL according to the item, calculation and conditions designed in the worksheet.
You cannot edit a specific worksheet SQL.
In order to change the SQL you need to change the worksheet using the "Edit-> worksheet" from the menu.
To change the SQL generated inside the folders you need to do that using the administrator.
Need to change the default value of parameterYou cannot use SQL statements for the parameter default value. it is not supported. if you need default you can use only constant (as it was). otherwise you can set the parameter to be optional and then add to this condition an OR saying that <item>= NVL(:Parameter,<your default>)
as <your default> you can use calculations so that if for example you want the current date you will create a calculation containing: SYSDATE.
Is there any way to figure out is the LOV is madeup of fixed constant values (like independednt value set) or they are fetched from some sql query(table validated value sets)?They are based on SQL, even they are const then you will see it as
select 'a','b'... from dual
you can find the LOV (called item classes) in the administrator.
Go to the item your condition is based on and see its properties.
In the properties you should see the item class it uses.
Close the properties and go to the item classes tab, search for this item class and figure the folder it came from.
This is the folder you need to change in order to change the LOV.
Hope it helped a bit, you sure asked several big questions...
Tamir

Default values in EO's and DB

Hi all,
in my DB (Oracle 9i Rel.2) I can define default values. In an INSERT statement I can use the keyword 'default' to add the default value for this field. When I create my EOs, the default value is completely ignored. Of course I can modify my EO's to have that default value. But it would be nice if the EO's would contain a keyword like 'default' to set the DB's default value. If there are any changes for the default value in the DB my EO's wouldn't need any changes. Is this possible? How?
Thanks,
Axel

Thanks for responding..... However, it didn't work for me. I guess I'll stick to setting the value in the create method of the viewRowImpl. Just FYI.... what is working for me now is to check to see if the getCol() is null or length of zero and set the default date that way.
By the way... do you have an exampe of a class file for creating a MessageList Data Object?
Thanks again!
Connie

Know default values of Lexer punctuation and endjoins

I am using Oracle Text 11.2.0.2.0. I have a CTXCAT index with prefix on.
I am creating lexer as
ctx_ddl.create_preference ('MY_LEXER', 'BASIC_LEXER');
ctx_ddl.set_attribute ('MY_LEXER', 'PRINTJOINS', ',.-''()/^&"');
in my ctxcat index.
However if period comes at the end of a word I cannot to prefix search in it.
select * from mytab where catsearch
(SRCH_NM, 'b.b.*','') >0
Is period (.) being treated as punctuation or endjoins.
How can I know whats are the default values used for punctuations, endjoins? and how can I can so that punctuation is empty?
Thanks.
Have a happy holiday.

As you suspected, the period is a default punctuation. You can view the attributes for the basic_lexer, followed by their default values here:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
So, if you reset the attributes for punctuations for your lexer to just the question mark and exclamation point, then it works as you want, as demonstrated below. You can see the tokens that are created as a result of indexing by select the dr$token column from the dr$your_index_name$i domain index table. Bear in mind that, if you are searching for any word that is the last word in a sentence, followed by a period, you will now have to either include that period or a wildcard in your search.
SCOTT@orcl_11gR2> create table mytab
2    (srch_nm varchar2 (30))
3 /
Table created.
SCOTT@orcl_11gR2> insert all
2 into mytab values ('B.B. HEMPHIL')
3 select * from dual
4 /
1 row created.
SCOTT@orcl_11gR2> begin
2    ctx_ddl.create_preference ('MY_LEXER', 'BASIC_LEXER');
3    ctx_ddl.set_attribute ('MY_LEXER', 'PRINTJOINS', ',.-''()/^&"');
4    ctx_ddl.set_attribute ('MY_LEXER', 'PUNCTUATIONS', '?!');
5 end;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index my_index
2 on mytab (srch_nm)
3 indextype is ctxsys.ctxcat
4 parameters ('lexer my_lexer')
5 /
Index created.
SCOTT@orcl_11gR2> -- tokens created by indexing:
SCOTT@orcl_11gR2> select dr$token from dr$my_index$i
2 /
DR$TOKEN
B.B.
HEMPHIL
2 rows selected.
SCOTT@orcl_11gR2> select * from mytab where catsearch
2 (SRCH_NM, 'b.b.*', '') > 0
3 /
SRCH_NM
B.B. HEMPHIL
1 row selected.

Master control attribute value discrepency between Master and child org.

Hi Guru,
We are facing a strange issue in Track install Base Attribute values. There are some 60K item having discrepency in the value of the this attribute between master and child.
We are wondering how it happens as this attribute is master controlled one and we never changed this attribute control and kept as Master controlled. The master value is true
If you guys experience this issue, please let us know the solution that you had applied to fix this issue.
regards
venkat

Try executing the vo1 query before setting the bind variable for vo2, then execute the vo2 query (if that's what you want to do).

How to set the Default value in the picklist and LOV

Hi All,
I have created a table with some of the columns as picklist and some of the columns as Lovs to insert some data into the tables as per the client requirement.
I want to make one value as default for the picklist and one value as default for the Lov.
Could you please let me know how can we show one value as default in the pick list or Lov.
thanks in advance.
jay

can u please help how can we set the initial value dynamically with the userid
For that i was passing the value from process Request of the lovCO by using the get user id to the vo query in the vo
but its not giving the initial value as default dynamically depending on the user id
could you please let me know the solution.
Thanks
Ajay

Control/Default values in Service Notifications and Service Orders

Similar Messages

Maybe you are looking for