User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

Similar Messages

  • IDocs for Notification and Work Order messages to third party software

    Dear all,
    Our client have a third party software in which he intends to manage the Notifications for PM. Now he wants that, when the Notification is created into SAP, the Notification number from SAP to be sent to the third-party software. Also, from the WO created from the Notification, to the third party software have to be sent the WO number and the status of the WO and, each time the status of the WO is changed, the new status have to be sent to the third party software, until the status of the WO is TECO.
    Please, can you help me, I am totally uninitiated of the IDocs and I don't know if there are some standard IDocs that can be used for this and how to manage them.
    Thank you very much for your help.
    Kind regards,
    Sorin

    Hi Sorin, 
    There are idoc types INOTIF and IORDER available but please refer to SAP note 812542 which states that the recommended way of transferring the data to third party software is to make use of the available BAPIs. Please note, the mentioned idocs will not benefit from future developments, but they
    will still be  supported in their current state. 
    However, please refer to the existing PM BAPIs in transaction BAPI. Specifically BAPI_ALM_ORDER_GET_DETAIL and BAPI_ALM_NOTIF_GET_DETAIL can be used to read
    data from the order and notifications. This data can then be exported in a way that suits your requirements.
    I hope this helps,
    Siobhan

  • User status for Notification

    Hi all, I want to change the user status NOCO(Notification completed) for M2 type of notification in the Quality client.I did it in Dev client for M2(Break down Notn) and imported the TR to Quality.When i try to assign this status in Quality client, the system is throwing an error as follows.
    Status NOCO is not allowed (QNF 10039901).   Solution please.Also provide the path in SPRO.
    Thanks in advance,
    Venu.

    Have you completed all of the tasks in the notification. Has the Notification the following system status : ATCO ,
    If not, you would not be able to complete the Notification. Try Completing all the tasks and then mark the Notification as Complete.
    If you have defined any user status to be NOCO, then check that whether in the User status profile, against the current user status of the Notification, the lowest and Highest columns allow the NOCO status or not. Include the status number for NOCO against the current user status. This would solve the problem.
    Path for User Status Profile Creation and Assignment:
    SPRO>Plant Maintenance and Customer Service>maintenance and Service Notifications>Notification Processing>User Status For Notifications-->Define Status Profile
    Edited by: Usman Kahoot on Jun 1, 2010 5:19 PM

  • User statuses for equipment,functional location,order,notification

    Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
    Regards,
    Vivek

    Vivek,
    There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the  business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
    You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
    Hope it is helpful to you.
    if you want further detail please revert.
    DP

  • Need help on to set User status for Operations in Maintenance order

    Hi experts,
    i am new to PM module.
    i need to do BDC for IW31. i want to know some inforamtion
    on user status for each opertaion.
    my problem is ,, what is user status.
    why it is saying order is not yet released when saving and status can not set.
    in this cases how can i do BDC.

    User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
    May be in your system user status are configured to set only  after the release of the order.
    For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
    http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

  • Colective Settlement and "CLSD"Status for Production and Maintenance Orders

    Hi dear experts,
    Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
    The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
    We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
    Thanks in advance,
    Lígia Moreira

    Hi,
    You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
    Regards,
    Eli

  • Customizing catalog profiles in  notification and work orders

    Hi all,
    I have been trying to figure out two problems:
    1- I would like to add one more catalog code to notification; therefore, there will be object part, damage, cause and activity. I would like to make this like a picture posted below. Catalogs in tab is not feasible and easy to enter.
    2- Is it possible to show all catalogs (object-damage-cause-activity) in work order tab? There are only two catalogs and I would like to add two more.
    Regards,
    Selçuk - Maintenance Planner

    Hi Selcuk,
    1. This is a standard screen area (015), which can not be modified.
    So you need to go fro screen-Exit to have a screen area with Activity fields under this one. Obviously Coding will be done in PBO and PAI to input values of the Z-fields to the real activity fields of the table (VIQMMA).
    Screen-Exit in Enhancement QQMA0001 will help.
    2. Similarly, for Order issue too you need to take help of Enhancement (Screen-Exits) IWO10018.
    Both jobs will be deep technical jobs.
    I do not see alternative ways other than developments for these requirements.
    Regards
    Jogeswara Rao K

  • Badi/user exit for sales and purchase order

    HI folks,
    I have to export the value of order type to a memory id for create and change transaction of sales order and the purchase order, I serached a lot for badis in purchase order and created implementation for that, but it didnt work. Please help me out....
    thanks in advance

    Hi,
    As written I need to export the value of order type into a memory id at the moment below transactions are hit:
    va01,va02, me21n, me22n.
    for va01 first u need to enter the order type and then press enter...at this event I need to export its value,
    for va02 the value of order is entered and then press enter,
    similarly I have to export the purchase order type during execution of ME21n and ME22n.
    I hope u will understand the problem better....If not please tell me

  • How to extract User status for Sales and purchase contracts

    Hello,
    We need to load the User status linked to sales and purchase contract.
    I think that there is no datasource in BI content.
    What is the better solution ?
    - Enhance a standard datasource like 2LIS_11_VASTH with a status field (This solution is not ok for Purchase contract)
    - Create a spécific datasource to extract this status
    - Others
    Thanks for your help
    Best regards
    Christophe

    Hi,
    In your scenario its better to use generic extractor to get the reqd data. This data can than be stored in a DSO on the BI side.
    And you can look up for the user status using a routine .
    Regards,
    Rahul

  • Set a User Status for Quality Notifications only if they are "Activated".

    Hello experts:
    I need to be able to set a User Status for Quality Notifications only if they are "Activated".
    When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification".  Initially, the only difference between the inactive "Defect Notification" and the active  "Quality Notification" is that  the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
    So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
    I checked the business rules for status DEFR and found that the following processes clear this status
      PMM1 -  Postpone Notification
      PMM2 -  Put Notification In Process
      PMM3 -  Assign Order
      PMM6 -  Put Notification In Process Again
    Any Ideas ?

    Perhaps some additional information would help you understand what I need to do.
    For notification type F3, we are recording all defects found in production.
    Most of these are expected defects that result in a minor reduction in yield.
    For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
    However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
    When this happens we manually activate the notification and assign tasks to find and correct the cause.
    It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
    The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing.  I therefore want to use the Activation event as the trigger to set my user status.

  • User status for Service Issue{for particular Sales order} in CRM

    Hi Experts,
    I've an issue related to the User status in CRM.
    I've a Sales Order and I'm creating a service issue for it in CRM.
    For the service issue number has some user status and I want to know from where it is coming.
    Is there any configuration involved in it, or is it coming from the standard coding part.
    Please let me know how to find the user status for a service issue.
    Thanks
    Subbu

    Thank you PePe,
    I'm asking about the user status not the system status.
    The user status has only the values{open, worked & closed}.
    now for a service issue if it is rejected then the user status are automatically changed into "Closed".
    So if you have any idea in this please help me.
    thanks
    Subbu

  • User status for order confirmation

    Dear Expert
    My requirement is when system status for maintenance order is CNF and authorize person agreed with all data in confirmation, he will set user status and then only I can complete my order (Teco).
    Till now I created one user status OCAP (operation conf aprroved. ) and I allowded TECO only at this status. when system will have any other user status TECO is forrbiden. and it is working fine.
    but now if my order is not CNF and person approves order(select OCAP) system allow to do TECO.
    How I can stop this?
    I mean if order status is not CNF even person select any user status system should not allow for TECO. If both condition are correct then only system will allow for TECo.
    Please suggest
    Regards,
    Prasad

    solved.
    it is only works for operation
    and not order header

  • User statuses on notifications should carryover to order when created from

    Hi,
    I have requriement for user statuses on notifications (IW21/22) should carryover to order when created from notification automatically.
    Did anybody worked on this type of scenerios. I already found some userexit (QQMA0014) but i could not able to find any thing related to user status in VIQMEL view.
    At the time of creation of notification IW21, when i go for creation of order, User status of notification should copied to order automatically.
    Appreciate any help.
    Regards
    MM

    Thanks Anji for your response.Yes there is FM status_read which i can use to get Status but my problem is during creation of order from notification, i don't have notification number so i can't use any database tables to get status for later use. As per requirment, during creation of notification, I can go to order creation. at that time whatever user-status I choose at notifcation, same status should get copied to order. I hope it got clear to you now.
    Please suggest.
    Regards
    MM

  • Does the Task Status Email Notification definition work for you?

    Hi,
    Have you ever set the email definition Task Status Email Notification? Worked?
    I've configured this template in my process tasks notifications. The e-mails for C and R status were sent OK but the values were all empty. Below are the subject and body of this email definition.
    Subject
    Process task <Process Definition.Tasks.Task Name> is <Process Instance.Task Details.Data>.
    Body
    The Process task <Tasks.Task Name> is <Task Details.Status>.
    The details of this process task are as follows:
    Process Task Name: <Process Definition.Name>
    Process Task Status: <Task Details.Status>
    Resource Name: <Resource.Resource Name>
    Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
    Assigned to: <Process Instance.Task Information.Assignee First Name> <Process Instance.Task Information.Assignee Last Name> [<Process Instance.Task Information.Assignee User ID>]
    Response Code : <Responses.Response>
    Response Description : <Responses.Description>
    Error Details : <Task Details.Reason>

    Thanks for your attention.
    For all custom process tasks I have set this definition to notify the target user, for example, when the task is Completed or Rejected. For all all I've got the same problem: the notification e-mail is sent but the values are all empty.
    I thought the tags were based on the fields returned by the getProvisioningTaskDetails that returns the information below. But you can see the tags are different from.
    Process Instance.Task Details.Key
    Process Instance.Task Details.Type
    Process Instance.Task Details.Status
    Process Instance.Task Details.Data
    Process Instance.Task Details.Reason
    Process Instance.Task Information.Assign Type
    Organizations.Key
    Process Instance.Key
    Process Definition.Name
    Process Instance.Descriptive Data
    Process Instance.Task Details.Projected Start
    Process Instance.Task Details.Projected End
    Process Instance.Task Details.Actual Start Date
    Process Instance.Task Details.Actual End Date
    SCH_REASON
    Process Instance.Task Details.Updated By
    Process Instance.Task Details.Update Date
    Process Instance.Task Details.Row Version
    Process Instance.Task Details.Action
    Process Instance.Task Details.System level
    Process Instance.Task Details.Creation Date
    Process Instance.Task Details.Created By
    Process Instance.Task Details.Note
    Process Definition.Tasks.Key
    Process Definition.Tasks.Task Name
    Process Definition.Tasks.Task Description
    Process Definition.Tasks.Days
    Process Definition.Tasks.Hours
    Process Definition.Tasks.Minutes
    Process Definition.Tasks.Milestone Datalabel
    Process Definition.Tasks.Disable Manual Insert
    Process Definition.Tasks.Responses.Description
    Process Instance.Task Information.Updated By User Key
    Process Instance.Task Information.Updated By User ID
    Process Instance.Task Information.Updated By First Name
    Process Instance.Task Information.Updated By Last Name
    Process Instance.Task Information.Assignee User Key
    Process Instance.Task Information.Assignee User ID
    Process Instance.Task Information.Assignee First Name
    Process Instance.Task Information.Assignee Last Name
    Process Instance.Task Information.Assignee Email
    Process Definition.Tasks.Responses.Key
    Process Instance.Task Information.Row Version
    TLG_KEY
    Status.Category
    Groups.Key
    Groups.Group Name
    Thanks,
    Renato.

  • User status for component item in service order (plant maintenance order)

    Dear experts,
    I cannot find the customizing for assigning a user status (profile) to a component item of a service order.
    IW31 - tab components - mark an entry - click on button "component status"
    Can you help me?
    Best Regards,
    Philipp

    OSS message created. Answer from SAP:
    11.02.2011 - 15:04:46 CET - Antwort von SAP     
    Hello Mr. Miller,
    user status for components are not possible and not intended. I'm
    sorry that I cannot provide better news.
    Best regards
    Reinhard Gruber
    Senior Support Consultant
    AGS Primary Support,
    Business Suite & Technology
    SAP AG
    Therefore this message is closed... but not yet answered
    Edited by: Philipp Miller on Feb 11, 2011 3:28 PM

Maybe you are looking for