Control Levels via Expression

Is there a way to use a slider to control the various attributes that make up a levels adjustment via expression? I am able to set them via scripting and have done so. However, the stopwatch that lets me create an expression is linked to the histogram as a whole, not its individual components, i.e. input black, input white, gamma, etc. Is this possible or am I barking up the wrong tree here? The goal is to control multiple levels applied to individual clips in one nice, neat location. An adjustment layer will not work for me because of layering. Also, I do not want my background to be effected by the adjustment, just a few of the pieces that make up my foreground objects.

You have to use Levels Individual controls..

Similar Messages

HT4437 Can I play a video from the remote app onto apple tv whilst simultaneously stra,ing music to other speakers via express?

Can I play a video from the remote app onto apple tv whilst simultaneously stra,ing music to other speakers via express?

Thank you for that, I wanted to make sure I was trying to replicate the same thing as you. Just tried it now, works fine for me.
Of note though, this will take a relatively well performing network to achieve this, I have such a network, if your network is not as good as it might be, you might encounter problems.
For the avoidance of doubt, I used the remote app on my phone to get my iTunes library on my computer to stream music to 3 of my Apple TVs, I then used the remote app to control another Apple TV and get it to stream a music video from my computer to it. Of interest I managed to do this while my wife was using yet another Apple TV (not with the remote app) to watch something else from iTunes on my computer.

Problem in page overflow with table contents having control level

Hello members,
My scenario is to display table contents from (Master Page)MP1 and then overflow to MP2 and use the MP2 for the rest of the overflowed pages too. In the form context, the table has control level grouping on a field(F1), which is set in context, because of which we can sub total for the group of records based on field F1.
Take the scenario that the content area(CA1) of MP1 fits only 10 records and content area(CA2) of MP2 fits only 20 records.
Test scenario 1:
If the table contents have records upto 20, then MP1 gets filled with first 10 records and then MP2 with rest of the 10 records. This scenario works fine.
Test scenario 2:
If the table contents have records upto 5, then only MP1 with current 5 records gets filled. This scenario also works fine.
Test scenario 3:( ISSUE BEING FACED)
If the table contents have records upto 50,(which are more than the combined number of rows of MP1 and MP2) then no data is displayed on MP1 and data starts filling in next MP2 and only approx 22 records are visible where few even cross the content area of the MP2. And no over flow for the rest of the records happen.
We use SFP Transaction in SAP to modify the layouts of the forms. Please let us know if the table having group set by control level causes any issue in this scenarion Test scenario 3.
Thanks
Vivek
[email protected]

Hi,
master pages don't support page breaks. Those pages are only used for the background things of body pages like page numbers, company logs or letter head layouts.
Don't use repeating objects on masterpages that may overflow its content area, this will always end up with unexpected results.
Put all those objects on a regular page (body page) which allows page breaks.

Multple page not coming correctly when using "Control Levels"

Hi,
There is a situation wherein "Control Levels" is required to be used. However, the output is not as expected. Some of the problems with this are
1. Some of the data is being lost
2. Some pages are blank
3. The data is overlapping/overwriting on the footer section
and others issues..
Has anybody come across similar issues? If yes, could you suggest a solution
Thanks in Advance.
Thanks,
Jayant

Having raised this message with OSS, we got to know that the issue was with the generated XML file. The line is BOLD needs to be added between the lines as shown below.
<template xmlns:xliff="urn:oasis:names:tc:xliff:document:1.1" xmlns="http://www.xfa.org/schema/xfa-template/2.4/">
<?layout streamLineLayout 1?>
<subform layout="tb" locale="fr_CH" name="data">
Not sure of the real purpose of this. But it works

Controlling Matlab via TestStand COM Objects

I am attempting to control MATLAB via teststand activex com objects. I set up my module to use the matlab 7 automation server, and when I try to run the sequence, I get this error:
"Create New Object" in automation call failed.
No such interface supported
One reason this can occur is if the interface of your COM server cannot be marshaled. This can happen if your server is not using the default OLE marshaling implementation and does not implement its own proxy and stub code. If you write your server using Visual C++ you can add the oleautomation attribute to your interface in order to use the default OLE marshaling implementation. Alternatively, COM does not require marshaling if the server's threading model is the same as the client thread's apartment. You can try changing your server's threading model or the client thread's apartment to avoid the need to marshal the interface."
Anyone know how to fix this?
-Joey

It turns out this issue was a bug within Matlab itself. The correct registry keys were not being added for the Matlab ActiveX server with version 7.2. The bug report is located here. Once the correct registry keys were added there was no problem calling the Matlab ActiveX interface.
Pat P.
Software Engineer
National Instruments

Help for Control Level Events

Dear Friends
i had an internal Table Itab_emp
before saving from belowcode i want to check for a particular field
i had itab_otime which had value as time format for particular ids
so i want to add them for a id and check condition
output of itab_emp is
PERID Date OTIME
1      01.10.2007 013000
1      03.10.2007 001000
2      04.10.2007 000030
2      05.10.2007 001000
i want to add values for perid 1 and 2 and see the sum of that in a field in itab only so that i can apply condition
Hope u got my problem
Reflect changes in below code
i think control level events will help but How i dont know
SORT ITAB_EMP BY PERID.
LOOP AT ITAB_EMP WHERE MARK = 'X' .
    IF SY-SUBRC = 0.
MOVE-CORRESPONDING ITAB_EMP TO ITAB_OTAPP .
      ITAB_OTAPP-OBJID = 1.
      ITAB_OTAPP-TODTE = ZHR_PR_M_OTAPP-TODTE.
      ITAB_OTAPP-FRDTE = ZHR_PR_M_OTAPP-FRDTE.
      ITAB_OTAPP-IMMHD = ZHR_PR_M_OTAPP-IMMHD.
      ITAB_OTAPP-CRETM = SY-UZEIT.
      ITAB_OTAPP-CREON = SY-DATUM.
      ITAB_OTAPP-CREBY = SY-UNAME.
      APPEND ITAB_OTAPP.
    ENDIF.
ENDLOOP.
LOOP AT ITAB_OTAPP INTO WA_ITAB_OTAPP.
    MODIFY ZHR_PR_M_OTAPP FROM WA_ITAB_OTAPP.
ENDLOOP.
Hope will get answer as soon as possible
Please Help Out Genius
With Best Regards
Ruby

Dear Friends
i had an internal Table Itab_emp
before saving from belowcode i want to check for a particular field
i had itab_otime which had value as time format for particular ids
so i want to add them for a id and check condition
output of itab_emp is
PERID Date OTIME
1      01.10.2007 013000
1      03.10.2007 001000
2      04.10.2007 000030
2      05.10.2007 001000
i want to add values for perid 1 and 2 and see the sum of that in a field in itab only so that i can apply condition
Hope u got my problem
Reflect changes in below code
i think control level events will help but How i dont know
SORT ITAB_EMP BY PERID.
LOOP AT ITAB_EMP WHERE MARK = 'X' .
    IF SY-SUBRC = 0.
MOVE-CORRESPONDING ITAB_EMP TO ITAB_OTAPP .
      ITAB_OTAPP-OBJID = 1.
      ITAB_OTAPP-TODTE = ZHR_PR_M_OTAPP-TODTE.
      ITAB_OTAPP-FRDTE = ZHR_PR_M_OTAPP-FRDTE.
      ITAB_OTAPP-IMMHD = ZHR_PR_M_OTAPP-IMMHD.
      ITAB_OTAPP-CRETM = SY-UZEIT.
      ITAB_OTAPP-CREON = SY-DATUM.
      ITAB_OTAPP-CREBY = SY-UNAME.
      APPEND ITAB_OTAPP.
    ENDIF.
ENDLOOP.
LOOP AT ITAB_OTAPP INTO WA_ITAB_OTAPP.
    MODIFY ZHR_PR_M_OTAPP FROM WA_ITAB_OTAPP.
ENDLOOP.
Hope will get answer as soon as possible
Please Help Out Genius
With Best Regards
Ruby

Controlling Level At The Production Order Level

Hi,
I want to set the ML controlling level to the production order level because I want to see the actual BOM used for each production order at the production order level. Since a different BOM may have been used for each production order (although the FG is the same) i must be able to see the actual BOM for each production order at the CKM3N screen.
However in the controlling level setting there is no way to set the controlling level up to the production order level. May i know why?

hi
check this link
http://help.sap.com/saphelp_470/helpdata/en/b2/6d118acb0a11d28a150000e83234f3/content.htm
check whether production order level is possible. i dont thinks so.but it highly affects your system performance.
krishna

Control level Staements

What are control level statements ? what is the use of this ?
can any one give sample examples for control level statements
points for sure...
Regards
Vijaya

Hello Vijaya,
Check out the code below
Processing Control Levels
When you sort an extract dataset, control levels are defined in it. For general information about control levels, refer to Processing Internal Tables in Loops The control level hierarchy of an extract dataset corresponds to the sequence of the fields in the HEADER field group. After sorting, you can use the AT statement within a loop to program statement blocks that the system processes only at a control break, that is, when the control level changes.
AT NEW <f> | AT END OF <f>.
ENDAT.
A control break occurs when the value of the field <f> or a superior field in the current record has a different value from the previous record (AT NEW) or the subsequent record (AT END). Field <f> must be part of the HEADER field group.
If the extract dataset is not sorted, the AT... ENDAT block is never executed. Furthermore, all extract records with the value HEX 00 in the field <f> are ignored when the control breaks are determined.
The AT... ENDAT blocks in a loop are processed in the order in which they occur. This sequence should be the same as the sort sequence. This sequence must not necessarily be the sequence of the fields in the HEADER field group, but can also be the one determined in the SORT statement.
If you have sorted an extract dataset by the fields <f1>, <f2>, ..., the processing of the control levels should be written between the other control statements as follows:
LOOP.
AT FIRST.... ENDAT.
 AT NEW <f1>....... ENDAT.
 AT NEW <f2>....... ENDAT.
 AT <fgi>..... ENDAT.
 <single line processing without control statement>
 AT END OF <f2>.... ENDAT.
 AT END OF <f1>.... ENDAT.
AT LAST..... ENDAT.
ENDLOOP.
You do not have to use all of the statement blocks listed here, but only the ones you require.
REPORT DEMO.
DATA: T1(4), T2 TYPE I.
FIELD-GROUPS: HEADER.
INSERT T2 T1 INTO HEADER.
T1 ='AABB'. T2 = 1. EXTRACT HEADER.
T1 ='BBCC'. T2 = 2. EXTRACT HEADER.
T1 ='AAAA'. T2 = 2. EXTRACT HEADER.
T1 ='AABB'. T2 = 1. EXTRACT HEADER.
T1 ='BBBB'. T2 = 2. EXTRACT HEADER.
T1 ='BBCC'. T2 = 2. EXTRACT HEADER.
T1 ='AAAA'. T2 = 1. EXTRACT HEADER.
T1 ='BBBB'. T2 = 1. EXTRACT HEADER.
T1 ='AAAA'. T2 = 3. EXTRACT HEADER.
T1 ='AABB'. T2 = 1. EXTRACT HEADER.
SORT BY T1 T2.
LOOP.
AT FIRST.
 WRITE 'Start of LOOP'.
 ULINE.
ENDAT.
AT NEW T1.
 WRITE / ' New T1:'.
ENDAT.
AT NEW T2.
 WRITE / ' New T2:'.
ENDAT.
WRITE: /14 T1, T2.
AT END OF T2.
 WRITE / 'End of T2'.
ENDAT.
AT END OF T1.
 WRITE / 'End of T1'.
ENDAT.
AT LAST.
 ULINE.
ENDAT.
ENDLOOP.
Rewards points if helpful.
Thanks,
Sachin

Control level+read

Ques]]
THE STATEMENT
READ TABLE <itab> WITH TABLE KEY <k1> = <f1> <RESULT> .
Is therebut is it possible to refer to PARTIAL FIELDS as was possible with the statement
READ TABLE <itab> WITH KEY <k1> = <f1> <RESULT> .
Q]] The control level hierarchy must be known when you create an internal table --why?

Hi, abaper.
I found some thing in SAP Library:
Using a Different Search Key
To use a key other than the table key as a search key, enter <key> as follows:
READ TABLE <itab> WITH KEY = <f> <result>.
or as follows
READ TABLE <itab> WITH KEY <k1> = <f1> ... <k n> = <f n> <result>.
In the first case, the whole line of the internal table is used as the search key. The contents of the entire table line are compared with the contents of field <f>. If <f> is not compatible with the line type of the table, the value is converted into the line type. The search key allows you to find entries in internal tables that do not have a structured line type, that is, where the line is a single field or an internal table type.
In the second case, the search key can consist of any of the table fields <k 1 >...<k n >. If you do not know the name of one of the components until runtime, you can specify it as the content of a field <n i > using the form (<n i >) = <f i >. If <n i > is empty when the statement is executed, the search field is ignored. If the data types of <f i > are not compatible with the components in the internal table, the system converts them. You can restrict the search to partial fields by specifying offset and length.
The search is linear for all table types. The runtime is in linear relation to the number of table lines.
I hope it's helpful.
And I'm a beginner, I don't know the meaning of 'The control level hierarchy'.

Can not change the control level of item attribute "Inventory Asset Value"

I can not change the control level of the item attribute "Inventory Asset Value" from Master Level to Org Level. It's show me the message "FRM-40200: Field is protected against update".
Version is below:
Oracle Application: 10.7SC
Form: INVIDCTL 6.0.26

I did a trace when I chage the control level. the SQL is below:
SELECT COUNT(*)
FROM CST_ITEM_COSTS CHILD
, CST_ITEM_COSTS MASTER
WHERE MASTER.INVENTORY_ITEM_ID = CHILD.INVENTORY_ITEM_ID (+)
AND MASTER.COST_TYPE_ID = 1
AND CHILD.COST_TYPE_ID (+) = 1
AND NVL(MASTER.ITEM_COST,0) != NVL(CHILD.ITEM_COST (+) ,DECODE(MASTER.ITEM_COST, NULL ,0,-99999))
AND MASTER.ORGANIZATION_ID IN (SELECT MASTER_ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE ORGANIZATION_ID != MASTER_ORGANIZATION_ID )
AND CHILD.ORGANIZATION_ID IN (SELECT ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE MASTER_ORGANIZATION_ID = MASTER.ORGANIZATION_ID )

Ship Via Express vs Standand

Does anyone know if Ship Via Express is USPS, UPS or FedEx? How much faster is Ship Via Express than Ship Via Standard?
G5 2GHz Dual Mac OS X (10.4.6)

I don't remember exactly where they were shipped from by near Sacramento sounds familiar. The soft cover medium come in envelopes and the first was scrunched into the mail box. It didn't crease the book but could have. The large book, if shipped similarly probably would have been creased knowing how some other large envelops have been added to our mail box in the past.
The medium's quality was sub par if you compare to the large hard cover. The half tone/dither pattern was obvious to the naked eye at close range. For the intended use, a memory book for each grandkid of a day at SeaWorld with the grandparents, it was perfect. So "quality" is really a matter of intended use and expectations.
Will be interested to see how the medium books turn out now that we're at V6.

CONTROL LEVELS

Moderator message: do not post questions either in the subject or the body, in ALL CAPITALS
HI FRIENDS
at new ,on change of both r work almost same.
then why don,t we use on change of instead of at new in control level?
Edited by: Matt on Nov 20, 2008 11:34 AM - second warning

Hi Syamala
Before posting search in SCN You will a get sufficient data from SCN.
Check This Link
difference btwn at new and on change of
https://forums.sdn.sap.com/click.jspa?searchID=18939507&messageID=4734682
Ranga

I'm using my airport express so I can control stereo via iPhone/iPad. It's linked to my router wirelessly (via "join network" setting). It works fine for a while, but then airplay ability / icon always disappears.

My airport express is brand new and has latest software.
My router is an Engenius 300N, and is 6 months old.
iPhone is a 5S and has latest software.
I've tried restarting router, resetting Airport, and spoken with apple support.
The only thing that works is turning power to Airport off and on, but this only works for 5 minutes then disappears again.
Help please
Matt

Oh - and also disappears from other devices eg macbook and ipad.
thanks

Is there a way for the 5s to HOST CONTROL devices via Lightning or otherwise?

So I asked this question in the regular Apple forum because I am trying to help a company why is not very Apple savvy
figure out how to offer the same level of control they offer on Android devices with the iPhone 5, 5c and 5s. They realize
there are restrictions on the Lightning side but I was wondering if such functions can be controlled via the 3.5 jack being
as that is an output source for the iPhone.
I realize the EASIEST solution is for them to make their device BlueTooth capable and that would solve the issue right
then and there but they already have several thousand units boxed and ready to go so this would be a solution for all their
customers who own Apple devices and do not have the ability to control the device the way Android users can.
If anyone knows of ANY device that can be host controlled by any Lightning cabled device, please let me know so they
can look into it and get this going.
Thank you.

I can't answer the "host control" part of your question, but there are plenty of devices that can be controlled by an app running on the iPod. For example, the Square credit card reader connects to the headphone jack.
If the device vendor wants to use the Lightning port, they should join the MFi Program.
https://developer.apple.com/programs/mfi/

Can't Add To Access Control List Airport Express

We have both Airport Extreme (2) and Express Base Stations (3) to create a wireless network. On the Extremes I can click the Add button in Access Control in the Airport Admin Utility to add people to the list. On all the Express Base Staions I can edit or delete entries already on the list but can't add any new ones. I can export an Access Control List but not import one. The button is greyed out only the button works. I could add to the lists in the past and I'm not sure when it stopped working. The network structure and settings have not changed. Has anyone heard of this problem?
Aiport Express Mac OS X (10.4.8)

WDS is used on two Express units to relay the signal from the main base station but not on third one which is connected directly to the network via ethernet.
On the internet connected Express the Airport Network setting is:
Wireless Mode: Create a Wireless Network (Home Router)
All base stations have the same name to allow roaming.
Internet is connected using Ethernet.

Control Levels via Expression

Similar Messages

Maybe you are looking for