CONVERSION_EXIT_MATN1_INPUT is not working!
Hello
I am using to convert material number from external format to internal format in order to pad leading zeros to the material number, am using CONVERSION_EXIT_MATN1_INPUT, but dont know why its not working if the IMPORT matnr length is 9
1) If IMPORT material is '12345678' (length is 8) - is working fine and am getting 000000000012345678
2) If IMPORT material is '123456789' (length is 9) - is NOT working! am getting error message "The material number is longer than the length set" pls. let me know the reason and fix pls.
Thank you
Thank you
I saw 'Material No. Length' field is populated with 8 in OMSL tx.
But, i saw CHAR18 as in TNRO table for 'Number length domain' field
Pls. let me know that issue is because of OMSL's 8?
If so, then i have to pad zeros as prefix MANUALLY by logic in the prog. in order to make it to 18 length?
Similar Messages
-
Hi ALL i have a BDC code it is not working properly
this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_fileHi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
WERKS
CHARG
from MCHA
into (l_matnr, l_werks, l_charg)
where matnr = w_stck_cnt-matnr
and werks = w_stck_cnt-werks.
and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant -
Select query is not working in BDC Program
Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond -
Not work tablet UI on Prestigio 5080 PRO tablet
I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.
Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team -
Why self-defined access sequences of free goods can not work?
Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advanceDear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali. -
Adobe bridge raw not working with windows vista in photoshop cc, why?
adobe bridge raw not working in photoshop cc, is there a fix?
Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista. -
Adobe Bridge CS5 in windows 7 not working?
Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager -
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html -
Partner application logoff not working
We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
ThanksHi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem -
IPhone 4 Voice Memos not working/saving
Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1 -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Ideapad A1-07 tablet wifi-bluet​ooth does not work!
Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.
Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Polygonal lasso tool not working with stylus on Surface Pro 2
Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scottsame problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly -
Excite PRO 3G connection not work after Android v4.3 update
Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings) -
A2109 tablet autorotate does not work
The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Maybe you are looking for
-
As a user how can I make use of the highlight feature in iBooks on a PDF ?
-
IPod not appearing in iTunes Or Windows
Just bought a new computer, in the midst of transferring all my iPod stuff to this new computer I thought I was done last night, until I tried to update it today and it didnt even show up in My Computer. The apple website has been absolutely useless.
-
Whenever I try to map a user I get an error. I go to User Administration -> User Mapping, find the user, select them, select the system, enter the information, click save, and then I receive this error. Portal Runtime Error An exception occurred whil
-
Dynamic Link Error - Please HELP!!!!
I am getting this message "Could not connect to Adobe After Effects. Please verify that Adobe After Effects and Adobe Dynamic Link components are installed." I've not had any trouble with After Effects and the Media Encoder until this morning. I've c
-
Another Capital One Increase...This time an increase of 4K!
Background: I opened my Capital One Quicksilver One card in February of this year with a SL of $500 and requested an increase in April. I was automatically approved for a $1,000 increase. Fast foward to last Saturday night (7/11/15) I decided to try