Conversion from JCOConnector to Connection Framework

Hi,
I am just starting out on a piece of work to convert some old JCO based EP5 portal components to use the new connection framework, the docu seems clear on what to do with one small exception
Which external JAR libraries do I need to include in my eclipse project thus enabling me to use the corresponding import statements ?
Many thanks
Richard

Here are the libraries that you need for Connector Framework components:
.../additional-lib/connector.jar
.../additional-lib/com/sapportals/connectorframework/framework/GenericConnector.jar
.../additional-lib/com/sapportals/connectorframework/framework/ConnectorHelper.jar
.../additional-lib/jta.jar
.../portalapps/com.sap.portal.ivs.connectorservice/lib/com.sap.portal.ivs.connectorserviceapi.jar

Similar Messages

ACF(Altinn Connection Framework): Message Posting using SOAP via HTTPS

Hello Experts,
Giving you the background , we have imported and configured interface content of ACF (Altinn Connection Framework) provided by SAP (service market place). which will basically integrate SAP HR system with Altinn (Norwegian TaX system). Sync Message will be always sent from HR system to PI and which will be sent to Altinn system via Receiver SOAP Adapter (as webservice call). The target URL of Altinn will be https:// eg https://www.altinn.no/AuthenticationExternal/SystemAuthentication.svc
its working as expected BUT * without importing any certificate of Altinn in PI STRUST or J2EE engine’s keystore. And Also we have not enabled HTTPS in PI.
My Question is on Security of the message flow.
* Since we are passing the message from PI (which is not HTTPS enabled) to Atinn System by calling Target HTTPS Webservice, whether this message is Secure ? if its secure how we can prove i ?
my doubt is as per the link help.sap link-HTTP and SSL it says "Both parties of an HTTP connection (that is, the HTTPS client and the HTTPS server) must be technically enabled."
but without enable the HTTPS in PI its working.
* we tried enabling the HTTPS in PI as per help.sap link-HTTP and SSL , but no were in the Trace which shows the message was sent from HTTPS port of PI to the target URL . if you know where I can find the trace of it ?
Regarding,
Danab.

Hi
Did you figure this out?
I am about to deploy this for a customer and have just read through the guide and I am also questioning the security part as well as how easily this is to implement on single stack - I guess I have to do configuration by hand.
Kind Regards,
Pernille

Best practice video conversion from download

I am looking for best practice for video conversions.
I am downloading adobe recordings via this method:
http://server.adobeconnect.com/xyz/output/filename.zip?download=zip
From here, I have been converting the FLVs using either freemake video converter or FLV converter. I have tried converting into AVI (XVID), MOV, WMV, etc. (I need the file to be under 600 MB for an hour of recording, therefore it is going to need some type of compression).
My goal is to import the video into Sony Vegas Pro 10 for further editting. I have found that whatever method I use, the video and audio does not sync properly about 50% of the time. The video time is longer than the audio time usually. Or that there are other various errors, such as the video just freezing halfway through the video.
I have been using connect for a few years now, but with each update I find (connect 8, 9, etc), that the problems are getting worse. At this point I am just wasting time trying to convert into various formats using various codecs just trying to luck upon one where the video is at least without error.
What methods are others using to convert the FLV to a workable editable format?

Can't the FLV files be changed into many different formats through Apple's
Compressor or Adobe Media Encoder? These formats can then be opened in
standard video editing software for editing.
Best practice video conversion from download
mach5kel
to:
jsb152
05/21/12 01:03 PM
Please respond to jive-509399086-9dnu-2-2mvb7
Re: Best practice video conversion from download
created by mach5kel in Connect General Discussion - View the full
discussion
Yes, I use this as a last resort, as the quality of capture this was is
signifcatnly lower. As well as it is a much more time consuming process. I
sometimes have over 50 parts of 1 hour video. To use camtasia, you need
first to record it, then it must be saved in a camtasia format, and then
lastly rendered into avi or wmv. Therefore, it is does take awhile.
Really, I feel there shouldnt be so many errors in the conversion process,
but I am finding the FLV recordings themselves have problems. This last
file I am looking at, even the recording playback on adobe connect, has
serious issues with audio and video sync. A problem that is all too common
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4426243#4426243]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4426243#4426243]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Connect General Discussion by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Unexpected implict conversion from unitless to unit

If I drop a constant unitless double value on a diagram and a doube indicator in the front panel, with some kind of units, and connect both, I get a broken wire, i.e. no implicit conversion from unitless to units.
If I drop a constant unitless double value on a diagram and connect it to both input choices of the buit in select, connect some value to the selector, and connect the output of the selector to a double indicator with some kind of units, I get a broken wire, i.e. no implicit conversion from unitless to units.
If I drop two constant double values on a diagram, one unitless and the other with units, and connect each to the two inputs of the selector, connect to the selector a constant that selects the unitless constant, and connect the output of the selector to a double indicator with the same units as the input with units, I get all valid connections and an implicit conversion from unitless to the base unit of the input. This is a bit unexpected, shouldn't I get a broken wire in there somewhere?

Okay, it's a slow Friday so here is what I found.
1. If we connect one unitless input and one input with units to a select function we receive a broken run arrow only when the the true input has units.
2. If both inputs have units but do not match, we receive a broken run arrow regardless of input placement.
3. In Range and Coerce will actually coerce units, it is the only simple primitive I found that does this.
4. Stuff gets really, really wierd with units. Follow these steps:
a. Create four double constants, two unitless and two "m"
b. Drop a select function and an "In range and coerce" function
c. Wire one "m" to the true input on select and one into the upper limit of the in range function
d. Wire one unitless numeric constant to the false input of select and one to the lower limit of the in range function.
e. Delete the Select function
f. Undo
In conclusion: LabVIEW units, how do they work? If I have time next week I'll try to ask around.
Matt J
Professional Googler and Kudo Addict
National Instruments

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Multiple ResultSets from the same connection occuring at the same time

Is it possible to have the following code? The issue is that you are iterating through two result sets created from the same connection at the same time.
try {
Connection conn=createConnection();
Statement s=conn.createStatement();
ResultSet rs=s.executeQuery(someSQL);
while (rs.next()) {
     Statement s2=conn.createStatement();
      ResultSet rs2=s2.executeQuery(someOtherSQL);
      while (rs2.next()) {
           //do something
} catch (SQLException sqle) {
} finally {
freeConnection(conn);

Joel,
The code compiles, but I have not tried running it. It is a question I need to know, designing a program.
The question is whether some error would come up or the first ResultSet would be corrupted because a second were created before the first one was closed.
--Gabe

Share files from 2 computers connected to same router from remote location

I can remotely (from external IP) share file from one computer connected to my router but I cannot share with other machines on my home network. Same with ARD access. Is there a way to access multiple machines across my router?

The only easy way to do this would be to use something like Back To My Mac with a MobileMe subscription or [LogMeIn|https://www.logmein.com].
The problem with what you're trying to do is that your entire home network only has one IP address to the outside world. How did you get it working in the first place? I'm assuming you've got a wireless router and set up port forwarding on the router to redirect traffic to a specific machine. The problem there is that file sharing uses a specific port (548), and you can only map that port to one machine at a time.
One possibility would be to use different services for different machines. For example, you could share files normally (port 548) on one machine and via FTP (port 21) on another. Another possibility would be to enable screen sharing on the one you can access from outside your home network, then use screen sharing to make that machine log in to the other machines on the network. Of course, neither of these are ideal solutions.

Iphone 4s-when wifi is off and I am away from my home connection can I receive and send texts and text messages? I want to keep my wifi off to limit data (email etc) to when I want to check it. Cellular is roaming"voice only" it says.Can I get texts?

When my wifi is off and I'm away from my home connection - it shows wifi off (unless I turn it on to check my email etc.) - and in the settings cellular it shows "voice only". Will I be able to receive and send texts in those settings? Or check voicemail. I had wanted to keep my email from coming in all the time and only want to check it periodically - so I turn ON my wifi when I want to check my email. But when my wifi was off away from home- I hadn't seemed to be getting my texts. So- do I need to keep wifi roaming connected when away from home to receive and send my texts in real time. (which is what I want) or am I still able to send and receive texts with my wifi off when I'm away from home. (When I'm home I am connected to my home data plan automatically through wifi and I get texts when I'm home - but I'm thinking I'm not getting texts in real time - is it because my wifi is off when I'm away from home? My cellular shows voice only when my wifi is off away from home. Am I doing it right to receive and send texts away from home? Or do I need to open up the wifi in order to receive and send text messages. I know that I would need to turn on wifi roaming - which will use data - for email checking or sending - as well as to use browsing apps and now I'm guessing to receive voice messages I may have missed? So do I need wifi on to receive texts too? Thank you - GregorySC

Hello GregorySC,
In order to send and receive SMS or MMS messages, you will need to have an active cellular data or Wi-Fi connection.
You will need these to send and receive iMessages:
An iPhone, iPad, or iPod touch
iOS 5.0 or later
A cellular data connection or a Wi-Fi connection
A phone number or Apple ID registered with iMessage in Settings > Messages
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

I can´t sync iCal events written in the iphone4 to the macbook ical, but conversely from macbook to iphone there´s no problem, can somebody help me?

Thanks for your answer! I tried as you say, erase the Sync History, but now does not sync any calendar, only displays the birthday ...do not know whatelse to try.

Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu

Conversion from JCOConnector to Connection Framework

Similar Messages

Maybe you are looking for