Conversion of LaTeX formatting?

I have some text in a database that I write out in InDesign Tagged Text
format for placing in an InDesign CS3 document. Normally, this text is just
plain text.
However, now I noticed some LaTeX formatting codes (LaTeX is a document
formatting language/system used often in the scientific publishing field).
It would be nice to interpret some of these that are easy, at least in a
rudimentary way (bold, italic, superscript, subscript, etc.)
Has anyone ever come up with a solution for handling LaTeX formatting code
with InDesign, either directly or through processing of a tagged-text file
before placing it in InDesign?
I'm looking for something that doesn't require manual intervention in 300
pages of text.
Thanks,
Lance

From what I understand LaTeX supports exporting to XML. That would most
likely be the best way to get it from LaTeX to InDesign.

Similar Messages

LabVIEW formula to LaTeX format Converter

Does anyone know if there is a VI available that will convert a LabVIEW formula to LaTeX format?
e.g.
(a1+a2)/2 ----> \frac{a1+a2}{2}
I wanted to check if something like this is available before venturing off and attempting to make my own.

This shows the reverse direction, which might give you a push in the direction you want - http://decibel.ni.com/content/docs/DOC-13859
Try to take over the world!

Using File Content Conversion converting XML format to text format

Hi All,
 I am able to convert to Text format using file content conversion, But the requirement is to convert the same for the structure with additional subnodes as in the example (also complex nested structures)
<ns0:SendXSDEmployeeDetails xmlns:ns0="http://ehro.eds.com/FRAMEWORK/FileToFile/FileCConverion">
 <Employee>
 <Employee_ID>2</Employee_ID>
 <Employee_Name>KannanKumar</Employee_Name>
 <Address>
 <Street>13th Cross Reddy</Street>
 <City>Bangalore</City>
 <Pincode>641026</Pincode>
 <Phone_No>
 <t1>9901934934</t1>
 <t2>9901934934</t2>
 </Phone_No>
</Address>
 </Employee>
</ns0:SendXSDEmployeeDetails>
can any one help on this please
I have already seen the blogs :
/people/krishnakumar.ramamoorthy3/blog/2007/01/27/generic-mapping-to-convert-nested-xml-to-flat--receiver-file-adatper
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Can any one help to do this in simple way 

Hi,
Like correctly pointed by JaiShankar, the Sender File Adapter currently does not supoort such stracutures.
the strcuture supported is described in this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards
Bhavesh

Data conversion from 212 format

I found a problem during conversion data.
I have a file which contains ASCII characters (in fact they're look
like ASCII on any editor) . I have to convert them to integer but I
know that data are organised into pairs of 12bit numbers packed into
byte triplets (format 212).
I made some vi (which convert 2 following ASCII characters to binary,
then divide them to pairs of 4bits, then some rotation etc..) but the
whole conversion takes too much time (64kb file conversion is taking
approx. 1minute).
Thank you for any suggestions,
Michael ([email protected])

Dear Michal,
I hope this vi work faster.
Input: 3bytes, data type unsigned int (U8)
Output: 2 values, data type integer. (INT16)
of course read all file to memory. Don't read everytime from file by 3
bytes.
Deniss
ps. vi i send by e-mail.
"Michal Szaj" wrote in message
news:[email protected]..
> On Wed, 18 Sep 2002 02:27:25 GMT, Greg McKaskle
> wrote:
>
> >This is one of those things that is quite sensitive to how it is coded.
> > If you make your VI available, others, including myself can give you a
> >hand with speeding it up.
> >
> >As for guessing at what might be going on, first look at the array wire.
> > If you are using locals or property nodes to access the a
rray, that is
> >the cause. If the array is written to a global and later accessed via
> >the global, that is causing it.
> >
> >I suspect that the bit manipulations on 64K should take something like a
> >few seconds.
> >
> >Greg McKaskle
>
> Thank you for your support.
>
> In this case I have only one vi and I don't use any global/local
> variables.
> At the beginning of the vi I load all text character from file to
> memory and then I'm making further operations.
>
> If it helps I can send the vi with data file.
>
> Thnx,
>
> Michael ([email protected])

Conversion of time format

conversion of string indicators containing 12Hour -time format into 24hour-time format
ie 1:35:00 pm(12hour time-format) to 13:35:00(24-hour format)
Attachments:
Doc1.docx ‏46 KB

priya2207 wrote:
actually i have taken a numeric control of time- date format in which display format of time is 24-hour type but the requirement is that the numeric control should be converted into string type in which display format is 24-hour type.
You have two options: Format Date/Time String or Format String. I prefer Format String since I am usually combining other things. For the format string, follow formats given in the LabVIEW Help (follow the links I already gave you).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Conversion of .dwg format

Hi,
I am using Location Appliance 2700 Serie, and I must import a plant in WCS.
According to "Cisco 2700 Series Wireless Location Appliance - Deployment Guide", the only two importable formats are: .jgps and .bmps.
I have a plant in .dwg format.
Can somebody help me to convert my format .dwg into either .jgps or .bmps ?
Thank you!!!

If you have AutoCad available, you can output it to jpg directly from AutoCad. If not, Visio is an option, as well as one of the many free utilities out there. Some co-workers of mine have used AnyDwg (anydwg.com), but there are many fine tools out there.
I would suggest a search of google for "+convert +dwg +jpg" to gegt a few potential programs. Most offer a trial period to see if you like them. If this is a one time conversion, a trial might be all you need.

Apple TV - Software for Conversions to .m4v format

I've been using MPEG Streamclip to do conversions from .vob, .avi, etc to m4v format. It seems to take an unusually long time (for a 2 hour film it takes 8-10 hours) and lately when it finally gets to the end, a message comes up that "Can't export movie" with no details given. My 1TB destination drive has plenty of space available.
I'm wondering if there's a better product out there even if it costs a bit of $$ ?
I do need the ability to convert to 1020 x 780p for my Plasma HD Set (for full screen) ...
BTW, I'm on an iMac 2 GHz Intel Core Duo with 2GB memory (the max) sunning OS X 10.4.11

I'm not sure but I don't believe the turbo h264 does 720p conversions.
You are certainly right; the webpage says:
Apple TV Video: Video: H.264 Main Profile, 5 Mbps max., 800x600 max., 30 fps max. Audio: AAC-LC, stereo, 128 Kbps, 48 kHz. (Note: If the source movie is larger than 800x600 it will be scaled to fit within 800x600 preserving aspect ratio. Resolution is maintained if 800x600 or smaller. Frame rate is maintained when 30 fps and smaller.)
Also if your source video isn't 720p, you are wasting a lot of time and HD space converting to 720p, you cannot create quality from nowhere.
I'm always amazed at the number of people who seem to think you can.

Email Video Files conversion to Quicktime Format

HP Privillion Windows XP Laptop
I have just purchase a ipod. I have loaded my music and pictures. I have loaded all my Video’s that were save to my hard drive from my camera.
Problem;I also have a lot of videos sent to me via email of my grandson which I cannot convert to QuickTime. When I try and open the video (which works fine on windows Media Player) I get a 2048 error, this is not a movie file. The file is: type, Video, Audio codec G.726, Video codec ISO MPEG -4 (M452) Location MOL 4361, AFS, Description Cannon MVX 10i, I tried down loading MPEG speed file but that didn’t help……….. Any suggestions? Thanks
HP Privillion Windows XP Laptop
HP Privillion Windows XP Laptop

DVDs use muxed mpeg video and QT will not export sound from such formats. QT Mpeg Limitations
One workaround is to demux the mpeg-2 to separate video and audio streams. Sorry, I don't have a link to a Windows demux utility but I am sure you can find one on the net. Convert those separately to QT formats and then use QT to combine the separate tracks into a single file, like mpeg-4, which the iPod should read. QT (if you buy the mpeg2playbackcomponent) will play and convert the video to other formats. For the sound you will have to use a separate sound utility to convert the mpeg sound stream to a QT compatible form like AIFF or Wave. This freeware application offers a Windows version that should do the conversion. Audacity

Conversion of doc format to pdf format using pdfexport in UCm using IBR

when i try to check in doc file from ucm to conversion, it is passed to IBR for conversion and the status is shown as Success after few seconds. But i can't able to view converted Pdf. The web-viewable link also given in older format, which it is uploaded. Any same is the case with conversion to XML format

Hi ,
Have you done the necessary configuration / set up for conversions . If not , then please check the following documentation : http://docs.oracle.com/cd/E23943_01/doc.1111/e14495/configibr.htm#INECM1154
Thanks
Srinath
Edited by: Srinath Menon on Oct 12, 2012 11:46 AM

Frame Maker document Format conversion to InDesign format

Frame Maker stores the authored document into binary format. My question is any Adobe Scripting/program guide to read the framemaker data and convert in a format which Adobe InDesign can understand.
I read an article that there is a MIF filter tool which provide such functionality. I love coding than using some prebuilt tool.
Is anyone has experienced anything related to converting existing framemake document using scripting/program to the format Adobe InDesign?
Thanks
Anil

Anil @TCS wrote:
Frame Maker stores the authored document into binary format. My question is any Adobe Scripting/program guide to read the framemaker data and convert in a format which Adobe InDesign can understand.
I read an article that there is a MIF filter tool which provide such functionality. I love coding than using some prebuilt tool.
Is anyone has experienced anything related to converting existing framemake document using scripting/program to the format Adobe InDesign?
Thanks
Anil
Hi, Anil:
If the article you read was in InDesign Magazine, it's probably my review of DTP Tools's MIF Filter plug-in for InDesign.
The FrameMaker Software Development Kit (SDK) is one way to program FrameMaker. Framescript is a third-party tool that runs scripts on FrameMaker. There are some publicly-available Framescripts, and many commercially-available, plus a few folks who custom-develop
Frame's MIF (Maker Interchange Language) is open. Opening an FM file that was saved as MIF perfectly recreates the original; well, not exactly, because it does leave out almost all miscellaneous corruption and garbage, so it's better than the orignal.
FrameMaker 10 introduces scripting with javascript by using ExtendScript. Search Google for terms like "framemaker 10 sdk," "FrameMaker MIF Reference Manual," and "Framescript," without quotes for links to these tools.
In my article I mentioned that there are some FrameMaker constructs that cannot be converted exactly to InDesign, because InDesign doesn't have those features. True sideheads are one example. "Straddle paragraphs" that go across two or more columns are no longer missing in InDesign, where they're called "span paragraphs." If you think you can program true InDesign sideheads, more power to you! The MIF Filter does its best to duplicate the FrameMaker appearance in its InDesign conversions, but the behavior is different; this means that if you edit such "innovative" conversions, they may fall apart.
FrameMaker can export XML and RTF, which InDesign can import, so you may find that these formats are sufficient to migrate your content.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Conversion of Date format(0bill_date) to no of days format

We have a report "customer payment analysis report" with following fields
Customer No , Customer Name , Customer Group , Payment Term , Actual Paid Days, Difference
In the cube we are having 0bill_date(actual paid date) ,but want to convert this 0bill_date(in date format) to Actual paid days( no of days format).
How to get that?
Edited by: ranamk on Jan 13, 2011 8:06 AM

Hi,
Count the number of paid dates. It will give you the number of actual paid days
Thanks,
Dinesh

Problem in Asian language conversion in pdf format? Need Help!

Dear All,
I have created an SAPscript form in Chinese, and Korean versions. The print preview of the form layout is coming properly when I am using corresponding output type options. But when I am trying to get a pdf format of the invoice layout, the Korean and Chinese fonts are not coming properly. What to do?
My second question is how to access Archieved database in SAP?
Eagerly waiting for your reply.
Regards,
Pulokesh

Hi,
Time Statement works only you implement Time Evalutation, once you run the Time Evalutationn than you activate the HR FORM =SAP_TIMESLIP , and maintain the Feature HRFOR.
Hope this will help you!!
Regards,
Samba.

.DOC to .PDF conversion with the format maintainence

Hi,
My requirement is to convert the exact text witht he formating in the .DOC file to PDF file.
I have done this using POI and IText ar files but I am unable to maintain the formating , tried and search the net but unable to find the solution.
Please help me in solving this issue.
Thanks in advance.
Pooja

Can you please tell me how did you solve this?
Cheers,
Kunjal

Conversion of date format from DD-MMM-YY to YYYYMMDD

Hi all,
i am getting date from oracle database which is in DD-MMM-YY format. i want to change it to YYYYMMDD format .is there any func module to achieve this.
bye

hi srikanth,
try this code it is exactly suite u r requiremnt
DATA:STR(8),S1(2),DD(2),MM(2),YY(4).
STR=SOURCE_FIELDS-/BIC-DATEFIELD(if bi7.0 )
STR=TRANS_STRUCTURE-/BIC-DATEFIELD(if BW 3.5 )
SPLIT STR AT u2018-u2018 INTO DD MM YY
SHIFT DD RIGHT DELETING TRAILING SPACE.
SHIFT MM RIGHT DELETING TRAILING SPACE.
OVERLAY DD WITH S1.
OVER LAY MM WITH S1.
CONCATENATE YY MM DD INTO STR.
RESULT=STR.
regards
sasidhar

Conversion of DATE Format?

Hi Experts,
Am importing the my_DATE value from front end as in the format of MM/DD/YYYY, but, my_bapi code needs to hv in the format of YYYY/MM/DD, then only my_bapi gives output!
I hv declared my_date as my_date LIKE RSPARAMS in my_bapi, under TABLES tabstrip.
So, How to convert from MM/DD/YYYY to YYYY/MM/DD? Wht is the FM?
thanq.
Message was edited by:
Srikhar

use offset command to convert desired output
if u want date in dd.mm.yyyy format u can use FM CONVERSION_EXIT_PDATE_OUTPUT u will get ur required date format as u ask dd.mm.yyyy.
FM - CONVERSION_EXIT_PDATE_OUTPUT
data : out_date(10) like char,
in_date(10) like char.
in_date = '10.02.2007'.
*take variables V1, V2, V3.
V1 = in_date+ 0(4).
V2 = in_date+ 5(2).
V3 = in_date+ 7(2).
Concatenate V3 V2 V1 into date separated by '/'.
Now, out_date will have DD/MM/YYYY
Thanks
Seshu

Conversion of LaTeX formatting?

Similar Messages

Maybe you are looking for