Converting a path to selection deselects the path group in the paths palette.

Hi, does anyone know how I can stop this from happening. It did not do it in any other versions of PS I have used including CS6. Before when I selected one path in a group of paths, and then hit convert to selection the rest of the paths in the group would remain visible and the group/slot would remain highlighted in the paths palette. Now when I select a path and convert it to a selection it deselects the whole group in the paths palette so they are not visible anymore. When you have many paths in a group and you want to contiually deselect and select paths in the same group and convert to selection and then deselect to convert another path in the group to a selection to then have to reselect the group on the paths palette each time you wish to do this is a serious pain and waste of valuable time. I cannot recollect their being a setting that would disable or enable this feature. Can anyone help?

Hi Lemorris,
There is another discussion here regarding this issue. I'm hoping that an engineer will be able to answer our questions. So far it has been 15 days since this initial request for help was posted and no one from Adobe seems to care about the fact that we are having serious issues with the new path behaviours. Sadly these new behaviours are a possible game changer for me as they are adding quite a significant amount of time to my working processes. I'm still within my 30 day cancellation period for Adobe CC and if I do not get a satisfactory reply from someone at Adobe who can at least relieve my conscerns and tell me that this is a known bug and will be rectified at some point I will be cancelling my subscription. I have a genuine concern about the software and not one single person from Adobe has deemed my issue as worthy of reply. To me that is a disgraceful customer service.

Similar Messages

One of the functional groups of the Logical Database "SDF" does not appear.

Hello,
I have a problem with the logical database "SDF". It has already defined 3 functional groups. When I select the buttom "display the contents" I can see all these groups with their owns fields.
The problem is that when I use a transaction which contains this logical database, in the dynamic selections I can only see two of the functional groups. The last one doesn't appear there and I don't know why.
How can I resolve my problem?
Thank you very much in advance.
Best Regards.

1 hour is the default timeout for "ExternalCommandTimeout". So, it could be that this one measure group's fact query is taking longer than 1 hour for the first record. You can see the query in the error messages and might like to try it out
manually. Note, a common issue is with referenced dimensions or Distinct Count when an inner join or Order By are added to the fact queries.
A simple solution might be to simply increase the ExternalCommandTimeout in the SSAS properties page. Try 7200, and if it completes in less than 2 hours, or fails after exactly 2 hours, you know this is the issue.
Richard

How to get the screen groups for the screen field which are on selectionscn

hiiii Experts,
               How to know the screen groups for the screen field which are on selection screen.
Thanks and regards,
kasyap

     NAME                                             PNPABKRS-LOW
        GROUP1                                             SEL
        GROUP2                                             DBS
        GROUP3                                             LOW
        GROUP4                                             180
to get this use this:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    if screen-name CS 'ABKRS'.
      BREAK-POINT.
    endif.
ENDLOOP.

Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.

Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.
I have dropped and recreated a fact table to refresh the data as the table is having identity columns. So not able to directly insert data. After that cube is throwing above error.
Please suggest.

Hi Md,
It hard to analyse the issue base on the limited information, Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error. Please provide us the detail information about it, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMEL

Hi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL

How does the MRP Group determine the Requirement Type

Hello,
I find in help that the MRP Group or the Strategy Group in the MRP view of the material master record determines what Requirement Type is used.
Could you please tell me in which table / transaction can I find the assignment of Requirement Type to MRP Group? I mean it in case when the Strategy Group has not been maintained.
I will appreciate your help very much.
Best regards,
Robert

Dear,
System will pick the requirement type from strategy group maintained in MRP 3 view of material master, If the strategy group is not maintained, then only system will check the MRP group In MRP1 view and check the strategy group maintained in OPPR
Based on strategy Group- you can find the requirement type In IMG>production> Production Planning >Demand management> Planned Independent requirement -->Planning strategy -->Define strategy , From here you can find the requirement type and requirement class
and then go to OVZG
if the requirement class have a setting for costing - order costing and costing details, while saving the sale order system will update the cost of goods sold in condition EK02

Need to find out the account group given the accounting document number

I am new to SAP. Please help.
Need to find out the account group given the accounting document number?

If you are asking about account assignment group then that can be seen in billing document -> Header -> Accounting Data.

How to use the access groups with the E61

I have configured a access group in the E61 to connect to the internet. But how do I tell the E61 to use this access-group instead of a access-point???

Access Point groups seems to be Supported only in IMAP/POP Email where you can select those to be used as an AP.
In Browser you can use those if you select Browser Access Point to "Always ask" mode -> They you can select the Group to be used as an AP.

Cant see the native groups on the forms and reports

We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
We did the migration for test environment, but didnt encounter this issue.
For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
We brought over the schema, migrate and register the applications, but the problem still persists.
Has any one encountered issue like this, I would, I would really appreciate any suggestions.
thanks

Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
Any idea would be highly appreciated.
thanks

HT6119 Music by the same group in the US and Australia.

Why would some of a groups music be avaliable in the US and some only avaliable in Australia?

Because they haven't granted Apple permission to sell the remainder there, or a glitch caused it to disappear from the iTunes Store servers. Try contacting them.
(101325)

Tolerance dialogue missing on "make work path from selection"

I am trying to convert a 1-color drawing to a path so I can put it into Illustrator. I use the magic wand to select the edges and get a nice tight fit. But when I select the "Make work path from selection" button, I get a sloppy fit. I've looked this up, and supposedly I should get a dialogue box asking me to state the tolerance. I have never seen that box - I've tried it and had colleagues come try it. My version 13.1.2 x64. Seems like a bug to me, but maybe I'm missing something. Is there another way to do this? Thank.s

R_Kelly wrote:
If you press the Alt/Option key while pressing the Make work path from selection button, then you'll get the Tolerance dialog.
Other ways are to right click inside the selection and choose Make Work Path or use the flyout menu from the Paths panel and choose Make Work Path.
Hah! I didn't know that RK
[EDIT] As an aside to the above information, having had a play with it, I have realised how poorly the 'Make work path from selection' feature works in Photoshop. It has always worried me that distibution of points that result from using that feature on a Shift drag eliptical marquee circle, appear less than optimal, but I have just lived with that because it is quick and convenient. But having just looked again, zooming right in and activating the point handles, the curve is just plain horrible!
Me thinks I shall take the time to do it properly in future, by using the Shape tool.
It also amazed me how many points were used when setting tolerance to the minimum of .5
Anyway... I am not getting my work done here, so time to earn a living

ALV: Need to select/deselect all output rows iwth a Button

Hi All,
I have an ALV grid displaying a few lines of data.
User needs a button in the application toolbar to SELECT/DESELECT all rows displayed in the ALV list.
I am using OO for displaying the layout.
I want to know if there is a method which can SELECT/DESELECT all displayed rows. If there is no method, is there a workaround of achieving same.
Just for your info I dont have a check-box as the first colum of my ALV.
Appreciate your feedback on same.
Thanks and Regards
Rajiv

hi
chk this out
TYPE-POOLS : SLIS.
Tables                                                              *
TABLES:
VBRK,
VBRP.
Parameters and select options OR SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
            S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
Internal Tables                                                     *
work areas
DATA: BEGIN OF IT_VBRP OCCURS 0,
       VBELN LIKE VBRK-VBELN,
       POSNR LIKE VBRP-POSNR,
       UEPOS LIKE VBRP-UEPOS,
       FKIMG LIKE VBRP-FKIMG,
       NETWR LIKE VBRP-NETWR,
       MEINS LIKE VBRP-MEINS.
DATA : END OF IT_VBRP.
Variables                                                           *
DATA : GR_ALVGRID TYPE REF TO CL_GUI_ALV_GRID,
       GC_CUSTOM_CONTROL_NAME TYPE SCRFNAME VALUE 'CC_ALV',
       GR_CCONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       GT_FIELDCAT TYPE LVC_T_FCAT,
       GS_LAYOUT TYPE LVC_S_LAYO,
       V_FLAG VALUE 'X'.
Start of Program                                                    *
      INITIALIZATION.                                               *
INITIALIZATION.
S_VBELN-LOW = 1.
S_VBELN-HIGH = 1000000000.
S_VBELN-OPTION = 'EQ'.
S_VBELN-SIGN = 'I'.
APPEND S_VBELN.
      SELECTION-SCREEN                                              *
AT SELECTION-SCREEN.
PERFORM VALIDATION.
      START-OF-SELECTION                                            *
START-OF-SELECTION.
PERFORM GET_DATA.
CALL SCREEN 0100.
      END-OF-SELECTION                                              *
END-OF-SELECTION.
      TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
      END-OF-PAGE                                                   *
END-OF-PAGE.
      AT USER-COMMAND                                               *
*&      Form VALIDATION
      text
--> p1        text
<-- p2        text
FORM VALIDATION .
SELECT SINGLE VBELN
FROM VBRK
INTO VBRK-VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no billing documents found'.
ENDIF.
ENDFORM.                    " VALIDATION
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
FORM GET_DATA .
SELECT VBELN
         POSNR
         UEPOS
         FKIMG
         NETWR
         MEINS
FROM VBRP
INTO TABLE IT_VBRP
WHERE VBELN IN S_VBELN.
ENDFORM.                    " GET_DATA
*&      Module DISPLAY_ALV OUTPUT
      text
MODULE DISPLAY_ALV OUTPUT.
IF V_FLAG = 'X'.
    PERFORM DISPLAY_ALV.
    PERFORM PREPARE_FIELD_CATALOG CHANGING GT_FIELDCAT.
    PERFORM PREPARE_LAYOUT CHANGING GS_LAYOUT.
    CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
     I_BUFFER_ACTIVE               =
     I_BYPASSING_BUFFER            =
     I_CONSISTENCY_CHECK           =
     I_STRUCTURE_NAME              = 'VBRP'
     IS_VARIANT                    =
     I_SAVE                        =
     I_DEFAULT                     = 'X'
          IS_LAYOUT                     = GS_LAYOUT
     IS_PRINT                      =
     IT_SPECIAL_GROUPS             =
     IT_TOOLBAR_EXCLUDING          =
     IT_HYPERLINK                  =
     IT_ALV_GRAPHICS               =
     IT_EXCEPT_QINFO               =
        CHANGING
          IT_OUTTAB                     = IT_VBRP[]
          IT_FIELDCATALOG               = GT_FIELDCAT
     IT_SORT                       =
     IT_FILTER                     =
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          TOO_MANY_LINES                = 3
          OTHERS                        = 4
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
        EXPORTING
          I_READY_FOR_INPUT = 1.
    ELSE.
      CALL METHOD GR_ALVGRID->REFRESH_TABLE_DISPLAY
   EXPORTING
     IS_STABLE      =
     I_SOFT_REFRESH =
        EXCEPTIONS
          FINISHED       = 1
          OTHERS         = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDIF.
    CLEAR V_FLAG.
ENDIF.
ENDMODULE.                 " DISPLAY_ALV OUTPUT
*&      Form DISPLAY_ALV
      text
--> p1        text
<-- p2        text
FORM DISPLAY_ALV .
IF GR_ALVGRID IS INITIAL.
    CREATE OBJECT GR_ALVGRID
      EXPORTING
   I_SHELLSTYLE      = 0
   I_LIFETIME        =
        I_PARENT          = GR_CCONTAINER
   I_APPL_EVENTS     = space
   I_PARENTDBG       =
   I_APPLOGPARENT    =
   I_GRAPHICSPARENT =
   I_NAME            =
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        OTHERS            = 5
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDFORM.                    " DISPLAY_ALV
*&      Form PREPARE_FIELD_CATALOG
      text
     <--P_GT_FIELDCAT text
FORM PREPARE_FIELD_CATALOG CHANGING P_GT_FIELDCAT TYPE LVC_T_FCAT.
DATA : LS_FCAT TYPE LVC_S_FCAT,
         L_POS TYPE I.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'VBELN'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Billing Document'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'POSNR'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Billing Item'.
LS_FCAT-OUTPUTLEN = '6'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'UEPOS'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Higher Level Item'.
LS_FCAT-OUTPUTLEN = '6'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'FKIMG'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Invoice Quantity'.
LS_FCAT-OUTPUTLEN = '13'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'NETWR'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Net Value'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'MEINS'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Unit of Measure'.
LS_FCAT-OUTPUTLEN = '3'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
ENDFORM.                    " PREPARE_FIELD_CATALOG
*&      Form PREPARE_LAYOUT
      text
     <--P_GS_LAYOUT text
FORM PREPARE_LAYOUT CHANGING P_GS_LAYOUT TYPE LVC_S_LAYO.
P_GS_LAYOUT-ZEBRA = 'X'.
P_GS_LAYOUT-GRID_TITLE = 'INVOICE DETAILS'.
P_GS_LAYOUT-SMALLTITLE = 'X'.
P_GS_LAYOUT-EDIT = 'X'.
ENDFORM.                    " PREPARE_LAYOUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'CANCEL'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'CANCEL'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      CALL TRANSACTION 'SE38'.
    WHEN 'CHANGE'.
      IF GR_ALVGRID->IS_READY_FOR_INPUT( ) = 0.
        CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
          EXPORTING
            I_READY_FOR_INPUT = 1.
      ELSE.
        CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
          EXPORTING
            I_READY_FOR_INPUT = 0.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT

HT2486 How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the group I want to send to.

How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the address book group I want to send to.

The group is "undisclosed" there are 6 contacts in the group. The contacts are listed in 2nd column entitled "name", one of these contacts remains highlighted or selected in grey. I can't remove the grey selection of the contact. When you select the "undisclosed" group as the "to" address the contact highlighted in grey appears in the email address box. The group name should appear in the email box, but it doesn't. This began to happen after I upgraded to IOS 10.6.8. However I'm not sure that has anything to do with the problem? I do not have "show all member addresses selected." Your help is appreciated.

Changing the "Reconciliation Account" in the master data of a Customer

Hi All,
I've to change the "Reconciliation Account" in the master data of a Customer. But this fiel has been made not modifiable.
Could anyone tell how change this?
Thanks,
Gandalf

Hi,
In SPRO, change the field status for the customer account group to optional. Then you can change the reconciliation account of the customer.
The Path -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Customer Accounts>>Master Data>> Preparations for Creating Customer Master Data>>Define Account Groups with Screen Layout (Customers). Here select the account group for the customer and double click on the line. In this screen, double click on Company code data. Then change the field status in Account management for Reconciliation account.
Hope this helps.
Thanks and Regards,
Anit

I was processing pictures and the Basic function on the right has disapeared ( the one that has Exposure etc) I know see the Histogram, then Tone Curve, HSL/Color/B

I was processing pictures and the Basic function on the right has disappeared, the one that contains Exposure, Contrast etc. I now have only the Histogram, Paint Brush etc, then it goes to Tone Curve, HSL/Color/B&W and all others down to Camera Calibration. How can I recuperate Basic ?? Thanks for your help

i have now found where the OS permission is located but cannot find a way to change it. Here is what I have done:
- Selected the Local Disk Folder
- Chose File>Get Info
- Click on Sharing and Permissions (It shows Read Only)
Now this is where I am stuck, the instruction in Apple Support says "Select a user or Group from the Name Column then choose the following Pop-Up menu in the Priviliges column(this is where the Read &Write option should be. I can't choose a user or group under the name column, all I have in the Name column is "Local Disk"
Can someone help me from here to convert to Read & Write, thanks

Converting a path to selection deselects the path group in the paths palette.

Similar Messages

Maybe you are looking for