Converting Volume data to Velocity data?
Hi all,
Just wondering if Logic (or any 3rd part apps) are able to convert midi volume data into midi velocity data?
Thanks!
I'd suggest to ask specific questions on the dedicated forums.
For Logic's environment
http://community.sonikmatter.com/forums/index.php?showforum=29
For Plogue Bidule
http://www.plogue.com/phpBB2/viewforum.php?f=4
In my experience people on these forums are very responsive, competent and helpful.
G4/1.2GHz Mac OS X (10.4.6) Logic 7.2.1
Similar Messages
-
Logic pro 9.1.7 does not show note velocity data with velocity tool
Anyone have an issue with files not showing note velocity and duration data with velocity tool in the piano roll in Logic 9.1.7? It only show the note and the velocity change (+1 or -1 for instance). I have to use Logic 9.1.5 because of that.
Hi
glankrudolph wrote:
I realize this could be a host of issues other than Logic Pro 9, such as Audio Midi Setup (which often doesn't recognize my Mbox2 Pro). But again, thought I'd start here.
If Audio MIDI Setup cannot see/recognise the MBox, then Logic will be unable to see it. Audio MIDI Setup is at OS level: if your MBox does not show up it is likely to be:
Driver issues (highly likely)
Cable Issues
FW socket issues: hardware fault.
CCT -
Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SVI just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected] -
Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SVI just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected] -
How to convert XML data into binary data (opaque data)
Hi,
I am trying to develop a process that delivers files after reading data from a database.
However, it is required not to deliver the data immediately. We want to perform some checks before the files get written.
So the way we want to design this is,
1. Read data from database (or any other input). The data is in XML format (this is a requirement, as in general, we have xml data)
2. This data is written, opaquely, to a JMS queue that can store binary data, along with what is the filename of the file that would be written (filename is passed using JMS Headers)
3. When required, another process reads the JMS queue's binary data, and dumps into a file
The reason I want to use opaque data while inserting in the JMS queue is, that enables me to develop a single process in Step 3 that can write any file, irrespective of the format.
My questions are
1. How to convert the xml data to opaque data. In BPEL I may use a embedded java, but how about ESB. Any other way....?
2. how to pass filename to the jms queue, when payload is opaque. Can I use a header attribute...custom attributes?
3. Which jms message type is better for this kind of requirement - SYS.AQ$_JMS_BYTES_MESSAGE or SYS.AQ$_JMS_STREAM_MESSAGEAna,
We are doing the same thing--using one variable with the schema as the source of the .xsl and assigning the resulting html to another variable--the content body of the email, in our case. I just posted how we did it here: Re: Using XSLT to generate the email HTML body
Let me know if this helps. -
How to convert raw data to original data
Hi,
I'm using db10g.
I have stored the blob of a word doc into the database using dbms_lob package.
Now during retrieval, i'm getting the raw data using the code
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
l_raw is of type raw.
I want to convert the raw data to original string.
Please Help
ThanksDivya wrote:
I think I have clearly told that i have blobs of different files in my database.
The files are of different type, I have blob of pdf,doc,html,xml,gif etc...
and in the procedure i have posted(get_file_contents), it is a database procedure and i'm calling it from the forms.
So i'm passing the file_name and file_id to the procedure(file_name and file_id are the columns in the table.
Table 'Blob_Details' have 4 columns file_id,file_name,file_type,theblob) and a varchar variable final_data.
final_data varchar(32000)
and in the procedure i'm taking the blob from database, reading it using dbms_lob.read in a loop and casting it to varchar and storing the contents in the variable final_data.
So coming out of the loop, the variable final_data will have the contents of the given file.BLOB data (such as word or excel documents and PDFs containing images etc.) are Binary data, not Character data. Converting that raw binary data to VARCHAR will cause issues.
If you have loaded a binary file and stored it on the database as a BLOB (Binary data) and you now want to create the original file from that BLOB, you will simply need to read the BLOB data from the database into BLOB variable and process it in chunks, using UTL_FILE to write out, in Binary mode, that data to a file with the appropriate filename. The actual process is quite simple...
As sys user:
CREATE OR REPLACE DIRECTORY MY_FILES AS 'c:\myfiles';
GRANT READ,WRITE ON DIRECTORY MY_FILES TO myuser;As myuser:
DECLARE
-- Data Variables
v_blob BLOB;
v_data_length NUMBER;
-- Loop Control Variables
v_offset NUMBER := 1;
v_chunk CONSTANT NUMBER := 32767; -- maximum chunk size
-- UTL_FILE variables
fh UTL_FILE.file_type;
BEGIN
v_blob := ... populate the blob variable here
v_data_length := DBMS_LOB.getlength (v_blob);
-- Open the file
fh := UTL_FILE.fopen ('MY_FILES', 'myfile.dat', 'wb', v_chunk);
LOOP
-- Exit when our file offset is bigger than our file
EXIT WHEN v_offset > v_data_length;
-- Write the output chunk by chunk
UTL_FILE.put_raw (fh, DBMS_LOB.SUBSTR (v_blob, v_chunk, v_offset), TRUE);
-- Increment the offset by the amount written
v_offset := v_offset + v_chunk;
END LOOP;
-- Close the file
UTL_FILE.fclose (fh);
END; -
Converting Java.util date to XML date in format YYYY-MMM-dd
I'm using below code to convert java.util.date to XML date
public static XMLGregorianCalendar toXMLDate(Date dte) {
try {
// this may throw DatatypeConfigurationException
DatatypeFactory datatypeFactory = DatatypeFactory.newInstance();
GregorianCalendar calendar = new GregorianCalendar();
// reset all fields
calendar.clear();
Calendar parsedCalendar = Calendar.getInstance();
parsedCalendar.setTime(dte);
calendar.set( parsedCalendar.get(Calendar.YEAR ),
parsedCalendar.get(Calendar.MONTH),
parsedCalendar.get(Calendar.DATE ));
XMLGregorianCalendar xmlCalendar = datatypeFactory.newXMLGregorianCalendar( calendar );
xmlCalendar.setTimezone( DatatypeConstants.FIELD_UNDEFINED );
xmlCalendar.setFractionalSecond( null );
return xmlCalendar;
I need to get the date in the format YYYY-MMM-dd, but it returns in a format YYYY-MM-dd. Can anyone tell me how can i change the format? Thanks>
The snippet of ApplicationClient where the assignment took place and the syntax occurred were:
1. DateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy");
2. DateFormat timeFormat = new SimpleDateFormat("HH:mm:ss");
3. Date date = new Date();
4. CustomerDetail customerDetail = new CustomerDetail();
5. customerDetail.setCollectionDate(dateFormat.format(date)); //got the above syntax error
6. customerDetail.setCollectionTime(timeFormat.format(date)); //got the above syntax error
.....I am running JDK 1.6.0_10, Glassfish v2r2, MySQL 5.0, Netbeans 6.1 on Windows XP platform.The format method returns a String not a Date. Why not just store the Date as is without formatting, and format it when you want to retrieve it from the DB and display it?
m -
Converting from milliseconds to a date format in java
This so that, that date can be inserted into a date column in mysql
What I have is something like 1119193190
I do:
SimpleDateFormat sdf = new SimpleDateFormat("MMM dd,yyyy HH:mm");
Date resultdate = new Date(yourmilliseconds);
System.out.println(sdf.format(resultdate));
and Java gives me something like:
Jul 04,2004 14:06
But Java then when inserting into a mysql table is all like um....no:
com.mysql.jdbc.MysqlDataTruncation: Data truncation: Incorrect date value: 'Jul 04,2004 14:06' for column 'prodDate' at row 1
proDate is of type date in mysql.
Help?jverd wrote:
"Jul 04,2004 14:06" is a String, not a Date.
PreparedStatement ps = conn.prepareStatement("insert into T(name, birthdate) values(?, ?)");
ps.setString(1, "Joe Smith");
java.sql.Date date = new java.sql.Date(yourmillis);
ps.setDate(2, date);
ps.executeUpdate();
I am a bit confused
This i what I have
for(int i = 0; i < productions.size(); i++)
//Create a new Production from the ArrayList
Production p = (Production) productions.get(i);
//Convert the date from milliseconds to YYYY-MM-DD format. for mysql?
SimpleDateFormat dateFormatter = new SimpleDateFormat("MMM dd,yyyy HH:mm");
Date convertedDate = new Date(p.getDate());
//Build a query to insert the Production into the table
String insertQuery = "INSERT INTO WELL_PROD VALUES(" +
"'" + p.getLocation() + "'," +
"'" + dateFormatter.format(convertedDate) + "'," +
"'" + p.getOilProd() + "'," +
"'" + p.getWaterProd() + "'," +
"'" + p.getGasProd() + "')";
//Print the query to the screen
System.out.println("-> INSERTING the following query into well_prod: ");
System.out.println(" " + insertQuery);
//Update the database using the constructed query
int result = statement.executeUpdate(insertQuery);
//Print out the result of the insertion
System.out.println(" INSERT RESULT: " + result);
}Are you saying something like
java.sql.Date date = new java.sql.Date(Something , what I have no idea, Should go here);
instead of
SimpleDateFormat dateFormatter = new SimpleDateFormat("MMM dd,yyyy HH:mm");
and then carry on as normal?
If so, what should go in those brackets based on the code?
java.sql.Date date = new java.sql.Date("MMM dd,yyyy HH:mm");
This is all being read in from a text file and converted over before being spit out to the data base, it all works except for the date... -
Converting seconds value to a date
Hi,
I have date column as integer like 1212638737.Could anyone tell me the way of converting this value to corresponding date value?user11365275 wrote:
I have date column as integer like 1212638737.Could anyone tell me the way of converting this value to corresponding date value?How is the number to be converted to a date? Its not a Julain date because the number is way too big -
When i convert any file to pdf, date is automatically added in the header in pdf file. How to change that?*
heres a screenshot
heres a screenshot of how i convert them -
How to convert object type to only Date type ?
Hii everyone,
I have a table in database and their is column called as date and its data type is DateTime
In my UI part i have taken a Datepeacker and what ever user selected that date i am storing in my Date properties which has the same data type DateTime and at the Insertion time the date inserting successfully but at the time of updating data i am getting
error that the Date is not correct format because in date property it having the value 23:12:2014 00:00:00 which is crate problem at the time of update. So how to solve this ?
Note : I am using VS2008 and using Datagrid inside datgrid what ever changes user make tat one i required to update ,below are my update code which done through datatable i.e
first i have done datatable dt=new datatable();
dt = EmpBusinessLayer.SelectManager(dd.Eno)
then my update logic is :
for (int i= 0; i < dt.Rows.Count; i++)
ee.Ename = dt.Rows[i][0].ToString();
ee.Job = dt.Rows[i][1].ToString();
ee.Dept = dt.Rows[i][2].ToString();
ee.Gender = dt.Rows[i][3].ToString();
ee.Status =Convert.ToInt32(dt.Rows[i][4]);
ee.Dates = Convert.ToDateTime(dt.Rows[i][6]);// Hear i am getting value like 23.8.2104 00:00:00
ee.Eno = Convert.ToInt32(dt.Rows[i][9]);
cmd = new SqlCommand("update Employee set sEname='"+ee.Ename+"', sEJob='"+ee.Job+"', sEDept='"+ee.Dept+"',
sGender='"+ee.Gender+"', bStatus="+ee.Status+", dDates="+ee.Dates+" where iEmpNo="+ee.Eno, con); // Hear Getting Error tat incorrect syntax 00
if (con.State != ConnectionState.Open)
con.Open();
if (cmd.ExecuteNonQuery() > 0)
return 1;
S.K NayakYou could use the yyyy-MM-dd format by calling the ToString method on the DateTime object:
cmd = new SqlCommand("update Employee set sEname='"+ee.Ename+"', sEJob='"+ee.Job+"', sEDept='"+ee.Dept+"', sGender='"+ee.Gender+"', bStatus="+ee.Status+", dDates=" + ee.Dates.ToString("yyyy-MM-dd") +" where iEmpNo="+ee.Eno, con);
Note that you should use parameters when create a command like this though:
https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlparametercollection.addwithvalue(v=vs.110).aspx
But that's another story for another thread in another forum.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
Convert String to java UTC date then to sql date
Hi,
I am trying to convert string (MM/dd/yyyy format) to UTC date time and store in the database.
This is what I did:
String dateAsString = "10/01/2007";
SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
formatter.setTimeZone(TimeZone.getTimeZone("GMT"));
formatter.setLenient(false);
java.util.date dateValue = formatter.parse(dateAsString, new ParsePosition(0));
dateValue will be Sun Sep 30 20:00:00 EDT 2007 in UTC.
Now I need to store this date and time to MS SQL database.
I used the following code:
java.sql.Date sqlDateValue = new java.sql.Date(parsedToDate.getTime());
But this code give only the date, not time 2007-09-30
Can anybody tell me how I can change this java date to sql date (or datetime?) so that I can get both date and time.
Thanks,
semajsemaj07 wrote:
Hi,
I am trying to convert string (MM/dd/yyyy format) to UTC date time and store in the database.
This is what I did:
String dateAsString = "10/01/2007";
SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
formatter.setTimeZone(TimeZone.getTimeZone("GMT"));
formatter.setLenient(false);
java.util.date dateValue = formatter.parse(dateAsString, new ParsePosition(0));
dateValue will be Sun Sep 30 20:00:00 EDT 2007 in UTC.
Now I need to store this date and time to MS SQL database.
I used the following code:
java.sql.Date sqlDateValue = new java.sql.Date(parsedToDate.getTime());
But this code give only the date, not time 2007-09-30
Can anybody tell me how I can change this java date to sql date (or datetime?) so that I can get both date and time.
Thanks,
semajTake a look at java.sql.Timestamp:
http://java.sun.com/javase/6/docs/api/java/sql/Timestamp.html
Edited by: hungyee98 on Oct 17, 2007 8:57 AM -
How to convert julian Date into Calendar Date
Hi,
I want convert julian Date to calendar Date (mm/dd/yyyy or mm/dd/yy format) in java.
Can any one help me how to convert julian date to calendar Date.
Thanks,
Krishore.import java.util.*;
import java.text.*;
public class jdate {
Calendar date;
public jdate(int j)
date = Calendar.getInstance();
date.set(Calendar.DAY_OF_YEAR, j);
public String toString()
SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
return (formatter.format( date.getTime() ));
public static void main(String args[])
if(args.length == 1)
int j = Integer.parseInt(args[0]);
jdate julian = new jdate(j);
System.out.println("Julian date(" + j + ") = " + julian.toString());
} -
How to convert Julian format date to regular date format
Hi,
I'm trying to convert Julian date(e.g. 2455657) passed to regular date format(e.g. 2011/4/6), but the Julian date is shown without conversion.
I set the following code, and changed the format to "Date" with "yyyy/M/d" format, but "2455657" is displayed, not "2011/4/6".
<?xdofx:to_date(HIRE_DATE_J,'J')?>
I also set the following with "Text" format field, but it still shows "2455657".
<?xdofx:to_char(to_date(HIRE_DATE_J,'J'),'YYYY/MM/DD')?>
How can I convert Julian format to regular date format?
Thanks in advance
ToruTake a look at the following post: http://blogs.oracle.com/xmlpublisher/2007/08/more_date_calculations.html
and look at the comments section. Based on the comments, it appears that you can not convert from Julian format and you would have to do this in your query.
Thanks,
BIPuser -
Is there a program out there to convert appleworks data to pages data
Is there a program that will convert appleworks date to pages data?
Word Processing documents can be opened directly only in Pages (AppleWorks 6 only).
Draw Documents can be opened directly only in EazyDraw (the more expensive version from their website, not the cheaper one from the Mac App Store, and you will need v4.0 'Retro' not the most recent version) or Intaglio (though this appears not to be able to handle very complex drawings).
Spreadsheets can be opened directly only in Numbers.
Presentations can be opened directly only in Keynote.
To use other programs, or open Painting or Database documents at all, you must export from AppleWorks first.
If you can no longer run AppleWorks you cannot open these document types.
This article examines the situation in a lot more detail:
http://rfwilmut.net/aw
Maybe you are looking for
-
Print data in two line in the same column
Hi, In a tabular Report I want to print a column (eg:Description,) in two lines in the same cell. Since the description is too long. Is it possible in report 6i. Or any other solution for this? Please reply.
-
Hello All, I'm having an issue where footage has completely random frames that are completely solid red. I was working with raw MXF wrapped files that are 1080p from a sony F5 so I thought it I might need to transcode. So I transcoded everything to
-
Transfer material stocks to PCA for previous periods (1KEH)
I have an issue with 1KEH. We did not run the 1KEH(generate opening bal for material stocks) for period 2 . In SAP it looks like you can either run in for current period or previous period. (not 2 periods back). I looked this up with SAP note 858363.
-
How to load javabeans help......
hihi i am doing a project that require the use of java bean technology. i understand that javabean are just java class with a certain set of methods inside it. i would like to write a program to test out how to load java beans. let say i got 10 java
-
Automatic drilldown after selection load in data view
Hello, I work in a specific data view of a planning book. After loading a defined selection a drilldown is executed automatically. I do not know how to avoid this - where can I stop this behaviour? The drilldown is executed for every defined selectio