COOIS - Saving Object Overview WIP Status layouts

COOIS - Would like to be able to save the layout of an Object Overview - WIP Status report. There is currently NO icons for "choose layout" , "export" or "views" available while in Object Overview. I need to be able to create a report showing the header and operations list and this is the only way to get both on the screen at the same time.
After I create the report layout with the fields needed, cannot save this format in any way. The only thing I can do is print the report to a PDF file for others to view. Would like to be able to save the format I have created and bring it up on screen anytime without have to create it from scratch each time. This would prove a great resource if I only had the ability to save the layout. Especially when have a few 100 production orders.
Thanks for all help in advance.
Stan

What happened to my other thread with 4 replies?
Receiving help from Prasobh.
Using COOIS:
LIST Object Overview
Profile WIP STATUS may be company created.
output is a 3 shades of blue and gray Production Order tree.
shows orders header, component, operation and confirmation lists at one time.
Thanks

Similar Messages

New Profiles for list Object Overview of COOIS

Dear guru ,
i run COOIS for list PPIOA000 (Object Overview) Profile 000000000001 (Standard Profile)
for production orders.
In object selection view the system purpose for every object (operations , components ..) a profile 000001.
I have tried in customizing but I havent found where can I add new profile for this list.
Thanks in advance.

Dear Cristiano
Go to transaction COIS double click the Overall profile 000000000001 Standard profile
Order infromation system: Overall profile detail screen appears
Double click the Profile 000001agianst order headers
Order infromation system:Object profiles Overviewl screen appears
Add new entries to appear in the object selection screen.
Note : If you even drill down you can change the fields to display respectively.
Regards
Soundararajan M,

Network - print object overview

hello!
i tried to print the object overview in a network (CN22, menu network->print), but the menu-entry is not selectable.
how could i print this overview - is there some customizing missing? the status of my network is already released ...
thanks!
matthias

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Saved Objects are not displayed in designer view after insert

Hi All,
My HFRS is acting weird today. I tried to insert a saved Object(text,Image) into my report. I have inserted them by (Insert>>Saved Object) but I'm unable to view them in designer view after insert. When I run the PDF Preview I'm able to see the objects on the report. Any assistance? I want to move the text object to the bottom of the report.
Thanks.

Resolved it.

Modifying / Moving objects in Web Dynpro Layout

Hi.
Can someone tell me if it is possible to edit buttons or other objects from Web Dynpro layout? If it is possible, how can I do this?
When I say edit, I mean move button/object to certain location or make size bigger.
I know I can do this in Adobe form layout, but I am hoping I can keep adobe form separately from buttons, so off-line Adobe form will not have buttons.
Thanks in advance for your help.
John

Hi John,
There is no property by which the size of a button can be changed. Although the text can be varied by using property "Design" of the text elements.
As far as position is concerned, The button can be placed anywhere according to user requirement. The simplest way of doing that is creating a toolbar and creating right aligned or left aligned buttons. or by just using the properties of the layout you are using.
Check the [Layout documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/47/af8841349e1909e10000000a155106/frameset.htm] for more details
Regards,
Kinshuk

What are saved objects in HFM

Hi Experts
What are saved objects in HFM? Plz give me an example?
regards
Smilee

Hi Smilee
Saved objects are related to Financial Reporting.
Saved objects option is used to avoid the recreation of code, thus I find it valuable to turn all report header and footer information into saved objects. Items such as company logo’s, report title/sub-tile information, dimensional point-of-view selections, date & time stamps, page numbers and data source information make for great saved objects as they typically reside on all financial or management reports.
The usefulness of report objects may seem less important during the early stages of development, but as your reporting repository grows, their impact becomes increasingly important. For example, changing a company logo on a few reports is a minor incontinence, but making that same change to 50 reports could take hours to complete, resulting in the inefficient use of development/ maintenance time.
For more information please go through the below link.
http://www.in2hyperion.com/websites/in2hyperionblog/post/2012/03/27/Increased-Efficiency-Utilizing-Saved-Objects-in-Financial-Reporting.aspx
regards
Dev

BIAC - goto 'Object overview'

Hi,
We installed the BIAC. The reports are running fine in the Portal.
If you use the right-click on the mouse (navigate) in the Portal, you can jump to:
- dataflow
- manage InfoCube
- change InfoCube (??)
- display InfoCube
- object overview
I found out that this setting can be maintained with trx. RSBBS, but it still does not work.
I even tried to run program RSTC_CALL_TLOGO_VIA_RRI with the variant. Here we receive dumps.
Does anyone have an idea?
We looked for notes, but note 1052621 - Short dump "OBJECTS_OBJREF_NOT_ASSIGNED" while accessing RRI is already in the system.
Regards,
Jos.

Hi,
I solved it.
You need to activate mimes in trx. SICF.
Also perform the steps of document: "Enabling the SAP GUI for HTML with the ITS on 04.PDF".
It works nice: Using the Administrator workbench from the Web.
Regards,
Jos.

Saving Object Styles

I have saved Object Styles to reuse in new documents, but I don't know how I did it and can't find the "Save Object Style" command anywhere. There is such a command on Swatches. How do I add to the library of Object Styles that I have on my desktop? Thanks in advance,

From the object styles panel flyout menu, choose load object styles.
Bob

Saving Master Pages question & photo layout question

I am making a custom book theme (for instance at 8x8 inches) to use mainly for printing layouts. When I design a page template that I want to use multiple times, I have tried saving it "to document master" and "as a new document master". If I delete the book, the 8x8 theme is still saved when I make a new book, but the page template is not. Is there a way to save the page template into the theme without leaving the old book in my Aperture library?
Thanks for any help you can give.

i was making a hard cover book in aperature and i was almost done
somehow it switched to soft cover
i lost the flaps in the front and back
all the pages seem to be ok
but now i can't get the hard cover back without ruining all the pages
and it is finished
i want to order
ugh any help here
thanks

How to align object in the report layout

Hello,
I find it very difficult to aligin objects in the report editor or in the template editor. I know there are some alignment options, like aligning to the grid or aligning a group of objects, but they seem to work on the bounding rectangle for the object. For my text objects, those rectangles are arbitrarily sized. So aligning those rectangles does not correctly align the text baseline, for example.
Does anyone have a tip on how you can align objects? I there maybe a way to alter the size of objects by changing a number in a property sheet somewhere?
Regards,
Frans

The problems I am having now occur when I am editing the margin in the template editor. For some reason, the flex and confine options can not be turned off in the template editor. I believe they are turned on in this mode, at least in tools:options: paper layout they are turned on. But anyway, this really does not matter because I don't have nested objects in the margin. The objects that will go flying off are completely unrelated to the object I want to move or resize.
Update: I have just tried editing the layout of a report that was based on the template I am working on. Turning flex off there had a positive effect. It seems indeed the 'flex' setting is to blame for the problems I am experiencing. Thanks for the tip!
So now I would really like to know how to turn of flex in the template editor..

Appraisal Document - MSS Overview Screen Tab Layout

Within MSS when displaying the status flows of the appraisal documents the tab 'In Review' is out of order. The layout of the tabs are In Prep, In Planning, In Process, Completed, Approved, Closed Approved, Rejected, Closed Rejected, In Review
How do I get the 'In Review' tab displayed after 'In Process"?
Also, is there a way to hide the tabs: Approved, Closed Approved, Rejected, Closed Rejected since we are not using the approval process?
Thanks for your time.

Implement note 1280314

Objective Setting & Appraisals - Status Flow

Hello,
I'm working on OSA module.
When i configure the status flow, i have two options regarding the state of the appraisal after status change:
- Save and Change to Display Mode
- Save and Exit Appraisal Document.
My requirement is that the appraisal is saved and user can continue editing.
Is there a way to add an option here?
Regards,
Fabio.

Hi -
Typically if you are using push buttons to move the document into a new status / sub status, you would be moving the document to another person in the process, so I'd be interested to know what the exact requirement is. Are you wanting to put it in a new sub status for reporting reasons?
If you are making changes and want to change the status, but still stay within the document and edit, im not sure you can do that through standard configuration. Have you tried not selecting one of the two options and leaving it blank? I wonder what that would do?
Thanks,
Nick

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Using mime objects in bps excel layouts

Does anyone know how to user mime objects in bps excel based layouts? I know you can insert 'pictures' but I don't see a link to the mime repository like you have in the web interface builder.
Thanks
Tim

Hi Charles,
There are two How to documents available on SDN, to work on the MIME objects and the procedure for the same.
How to Add a Logo into the MIME Repository
How to Add a Cascading Style Sheet into the MIME Repository
Refer to the below links to access the same.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to add a logo into the mime repository.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to add a cascading style sheet into the mime repository.doc
Hope it helps

CJ20N Authorization Object for Project Status Changes

Hi Gurus,
Can any one knows the Authorization Object responsible to control the change of status for a project in the CJ20N?
We want to control who can and who can't change the STATUS of a project independent from other changes.
Regards
Gustavo Balboa

User authorization object B_USERSTAT. Before that u should define authorization key in Tcode:BS52 and assign it to User status in Tcode:OK02.
In authorization object B_USERSTAT set ERSL=Authorization Key, so that the user can change the status of that perticular status only.
Venkat

COOIS - Saving Object Overview WIP Status layouts

Similar Messages

Maybe you are looking for