COPA Planning Module on R/3 side and update to BW

For some record types we are using the COPA Planning Module on R/3 to "upload" to COPA. Running COPA reports in R/3 these record types show up. In BW, the dataloads are not picking these record types up.
So my question:
What has to happen on the R/3 side, when using the COPA planning module, to "upload/update" these records so BW recognizes them?
Thanks, Mark.

Anyone have any ideas?

Similar Messages

FM : to call collective Search help and update two fields in SSCR

Hi Experts,
     I have problem while using collective serach help.
    My scenario is using Collective Search help thru that i want to update 2 fields in my selection screen.
Thru this function module F4IF_INT_TABLE_VALUE_REQUEST i can mapping and update two fields using DYNP_VALUE_UPDATE but using this function module i can't able to call my Collective Search help
in other way
Thru F4IF_FIELD_VALUE_REQUEST i can able to call the collective search help but _i can't mapping field and can't updated the
selection screen field_
Is any otherway to do it, Please help me ASAP.
Regards,
Florian.

Hi Friends,
I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
The search help is working fine and i am getting the entries with the following code.
The problem is i am finding extra popup on screen.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname         = space
fieldname       = space
SEARCHHELP      = 'MAT1'
MULTIPLE_CHOICE = 'X'
STEPL           = 0
value           = 'MATNR'
*dynpprog        = progname
*dynpnr          = dynnum
*dynprofield     = 'CARRIER'
CALLBACK_PROGRAM          = 'ZTEST_1_PRA'
CALLBACK_FORM             = 'F4CALLBACK'
TABLES
RETURN_TAB                = RETURN_TAB
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5.

Budget and Target COPA Planning tables

Dear All
I started to use SAP .Net Connector 3 with VS2010.
I want to get the Budget and Target from SAP tables it all reside in COPA planning.
The TCode = “KEPM”.

Almost all .NET Connector work begins with finding the right RFC-enabled BAPI to call. In your case, this is most likely BAPI_COPAPLANNING_GETDATA. From that point, please refer to the tutorials available for invoking this function module from your C# or VB code.
Here's a good one for non-ABAP developers -- How-To Use SAP Nco 3 Connector | .Net 4 | Visual Studio 2010
Basics
Programming Guide

ODI and Hyperion Planning Module

Hi, is anyone using the planning module with odi? I'd like to know how to delete a dimension.
Thanks in advance,
Roberta

Hi Roberta,
You can use the ODI IKM to delete members by setting the operation column to delete but Planing does not allow a dimension to be deleted. At least as far as I know. If you need to delete a Planning dimension you might post or search the Planning forum.
Thanks,
Denis

COPA Planning-Upload via KE13N

Hi Experts ,
I am doing COPA planning , but stuck with the excel upload via T code KE13N.
-I have defined the planning level on the basis of the sales organisation
-Planning packages on basis of years.
-Paramater set has also been defined. Integrated excel is checked here .
-While saving the planning layout i have defined the coloumns for Company code, distribution channel, division as Lead columns.
When i am trying to execute the parameter set, excel gets generated. i am unprotecting the excel and doing the changes in layout, Since i want Characteristics in rows and Values in their corresponding columns . i save that excel to my desktop in text format.
After this in KEPM i goto settings > fomatting > Save file description.
It gives me mesage " File description 02_CE1CA00__SAP_001TEST7 was saved"
After this i goto KE13N and trt to upload the text file i created before but i get the error message
"File description 02_CE1CA00__SAP_001TEST 7 does not exist".
Cld u pls advise where i am going wrong .

Hi Christian,
Thanks for your reply.
I have corrected that error, now if i am trying to upload it is giving me the below 2 errors :
1.Entry should have template ___.____
Message no. RRKEB001
2.Error occurred when generating data for the planning processor
Message no. K9400
Cld u pls help me with this .
Thanks !!
Mani

Can we Creare a Functional Module in Our BW side?

Hi friends,
Can we Creare a Functional Module in Our BW side?
Thanking you.
i would appriaciete if you share my issue.

Hi,
You can create FM in BW side, it is like normal ECC FM.
Eg: Goto SE37 and give /OSP/SCHEDULE_WEEKDAY_JOB and see the details, like that you can create your own FMs in BW.
Thanks
Reddy

I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green.

I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green. The computer froze with these pixels, so I shut it off and restarted it, and there were this green lines everywere. So I turned it off, and the next day I turned it on and it began to work just fine, but suddenly the same thing happened again, and when I restart the computer again there are these green and some red pixels everywere.
I've read 10.7.3 is giving people many problems, but I never saw that it gave one like this. How can I fix this, or what will Apple do to fix this problem they caused me with their update.
Thanks

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

COPA Planning to Profit Center Accounting

Hi,
We are using ECC 6.0.
When we do COPA planning and transfer the values of COPA to Profit Center, no data has been transfered to profit center plan items.
We have not activated Planning version of Classic Profit Center Accounting. Is it required for ECC 6.0 also to activate Classic Profit Center Accoutning?
We have Mapped requisit Value fields of COPA to GL Accounts.
Can any one guide us in this regard.
Thanks in Advance
Sudhakar

Hi,
In COPA the planning has been done to the value field of PRCTR which represents Profit center. Through report forms the actual and plan data for the value fields can be derived in COPA itself. I dont think that the planned values can be transferred to profit center accouting. On the other hand the actuals of profit center with the same value fields can be derived in COPA.
Assign points if its useful
Regards
Kaarthik.D

Planned orders created at APO side are not coming to the ECC

Hi All,
I am not getting the planned orders generated in the APO in to the ECC side after running the Product Heuristic. Many times I refreshed the stock requirements at ECC side and also APO side but still the planned orders generate has not come to the ECC. I am just new to APO. It would be great help if somebody can help me can guide/advice me on this.
Thanks & Regards
psamp1

As well as Sajeev's reply, you also need to ensure that the Products and Plants you are planning are in an active integration model and that the transactional data you are expecting is also in an active integration model
You can check this by using the transaction CFM5 in ECC, enter your products and plants in the general selection options then tick the checkboxes for Materials, Plants and Planned Orders. On execution the system will tell you if they are in an active model or not.

COPA Plan values not appearing in report

Hi
I posted COPA Plan values using KEPM and line items are appearing in KE25 but no values are not being appeared in COPA line item report we created using report painter. We used KE94 and KE91.
Actual values appearing correctly in report.
Any help??

Check if you have Plan/Act indicator maintained correctly with the plan value. If it shows up in other reports, I don't see any reason why it will not show up here. I would also check other parameters entered in the report and see if any other characteristic is preventing plan values from populating.
Shail

COPA - Planned Material Cost not appearing in KE30 report

Hi all
In COPA planning, I manually planned the Material cost (Material External Price) along with the Sales Quantity and Revenue for two company codes (one plant in each co code). But in KE30 report, I could see the material cost (MEP) values only for one company codeplant. What could be the issue?
I even tried valuation in KEPM. Valuation step is calculating and populating the material cost in KEPM, but the values are not flowing to KE30 reports. And this happens to only one of the two company codes.
Thanks
Vamsi

Hi Vamsi
Please check table CE2XXXX, where XXXX = Op Concern.... Here, can you see the plan line items??
If yes, then the issue is with your report definition in KE30... May be you are restricting values display in KE30 report by virtue of your selection parameters
br, Ajay M

What are all Modules come under sales,service and marketing in Oracle CRM?

Hi All,
This is Hemanth writing in. I'm new to oracle CRM implementation in client side through Oracle Business Accelerator Methodology . I want to map sales ,service, marketing Modules.
Our client Company is manufacturing crane, tower crane,cutting bending machine.
what are all Modules come under sales, service and marketing ?
In Which module we can map the Trade management and logistics ?
Thanks in Advance
Hemanth.C

hi prakesh,
firstly, cic winclient is an older version and obsolete so its better to implement the new crm version.
secondly, in any case if you want to implement, then your 3rd party raw data has to be mapped with the SAP system which could be a problem. Middleware could be a lot of effort. Rest all depends on how much customization you need for your business requirement in cic and sales. In case you are implementing standard functionality mostly then no major complications are expected otherwise lot of development effort may be required.
regards
shikha

How to implement the WIP in production planning module?

Hi Gurus,
Good afternoon! We are planning to Implement the WIP in Production Planning Module. Current set-up, we create production order and confirmed for all process in production transaction especially the consumption of raw materials and Goods receipt of FG from one Production order. We have two activity in production transaction. But we would like to separate the process per activity. Can we ask on how to separate the transaction or implementing the WIP? To create production order as semi-finished goods and one production order for final finished goods. We would like to ask for your expertise and advise on how to implement WIP in SAP PP that there is no duplication of manufacturing FG cost.
We would like also to know all FI entries per transaction to make sure there is no double entries in manufacturing cost of FG.
thank you,
weldin angelo

Hello Angelo,
Please refer this thread for your requirement
Wip calculation in production Order
WIP Settlement
I hope this information helpful to you
Regards
Umesh Mali

Difference between Oracle SID and an Oracle Database

Hi
Can any one please differeniate what exactly is the difference between an Oracle SID and a new Oracle Database?
We just need to create another instance of an application (so we need another copy of all tables).
So either we can:
1. New database SID created or
2. New user created in existing schema or
3. New database provided
Which is the best approach?

Hi,
New database SID created orThat is equivalent of creating a new database in your case.
New user created in existing schema orYou meant new schema(user) created in existing database. I assumed this because you do not want both application to update the same table copy, but different copy.
3. New database providedIt all depends on your you whether you want to create a new database or a new schema for getting another copy of table.
Some points which I take in mind
1) If I have a production database and I need to create a new set of tables for testing or any other purpose, I would create a new database.
2) If I have a test database and I need to create a new set of tables for testing or any other purpose, if possible I would create a new schema in existing database.
3) If I am running less in resources(hardware/memory), I would be createing a new schema in existing database.
4) If I am not running less in resources and I would to keep these two copies entirely different, then from security purpose I would create a new database.
Regards
Anurag Tibrewal.

4 copies of same form with differnt footers and terms and conditons at back

Hi Gurus,
I have a requirement for invoice printing have a standard driver program for that..
The problem is when we print the form we need 4 copies of the output with 4 different texts at the footer.
like customer delivery copy, payment copy etc.
And for cust delivery copy it should print the terms and conditons at the back side similarly a differt terms and condtions for payment copy..
Please Help.. and provide ur valueable suggestions

Hi Imran,
Efficient, easy and perfect solution is here:
Step-1: Your dynamic/conditional texts in footer should write in a new window. Create a new window and place it in page accordingly. Now, change the type of that window as 'COPIES WINDOW'.
Step-2: In side this window, create a program-line and get the value of system variable 'SFSY-COPYCOUNT'. This will be either of 001/002/003/004 for different 4 copies.
Step-3: Now depending on this value, print your footer.
Hope this will solve your problem.
Thanks
Arghya Roy

COPA Planning Module on R/3 side and update to BW

Similar Messages

Maybe you are looking for