COPA report (material name)

Dear Friends,
We have maintained in MM master material name as "ABCDEF" under FG.
but when i pull out report for this material using KE30 report - the material name only refelcts - "ABCD" why does not the complete name reflect in KE30 as well.
i even changed the Settings of characteristic display - to enlarge the field of the material name but it still shows the material name in trunkated format.
Please can you assist
Thansk
Sanjay

Hi,
generally, characteristics are limited to 18 digits maximum field length.
Check KE24 if the material "name" (is it material number or material description?) is displayed properly or not.
If it is, the KE30 report causes the problem.
If it is not, check the characteristics definition / field length in KEA5 of the characteristic that contains the name.
Best regards, Christian

Similar Messages

Material regrouping in MM02 not reflecting in COPA report

Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
Regds

Hi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

Characteristic Name of Sales Employee in COPA report is not appear

Characteristic Name of Sales Employee in COPA report is not appear, it is just the a Code of Sales Employee
1.I created Characteristic Derivation t.code KEDR Table lookup PA0001 using condition Origin GLOBAL USERTEMP1 until USERTEMP6
2.During Test Analyze Derivation there was result Derivation was not carried out. Reason: Not fulfilled in Field USERTEMP6
How to solve this problem?
Thanks & Regards,
Cyrenia

You need to use Characteristic Derivations for this to work.
In transaction KEDR, maintain a "look-up" and provide your Reference table as VBPA and your target field will be the COPA Characteristic that you defined for the Partner Function Sales Employee.
Select the Characteristics that will allow you to determine the Sales Employee (Partner Function = "VE") and then map the KUNNR field to the COPA Value Field.
This will allow the flow of Sales Employee Values into COPA and hence the description as well.
Hope this helps.
Cheers.

COPA Report Changes in KE30 for Configured materials - User Exit

Dear all,
We are having a configured material with BOM and we are using COPA Report.
For a given material type we need the row "Other cost of Goods Sold" to be zero since it does not take into account the child materials.
Is there any userexit to make this happen ??
Thanks in advance.
Regards,
Vivek.

Hi Vivek,
KE30 is a Transaction code. If you want to copy a Report associated with this Transaction code then go to transaction code KE30 Provide the data a initial screen. Then go to Utilities->status. A popup screen will be displayed. In SAP data tab There is a field called Program. Copy that program name & go to transaction code SE80 & provide the program name & go for display. Here all the related screens, fields, tables etc. will be displayed then right click on the program name & select copy & provide the target program name starting from Z. Save & activate it.
Note you can copy the standard program & copy it also but I think it will not take place the standard porgram, you will have to run the progam manually.
I think BADI or BTE may be available for this transaction.
Ashven

Issue in COPA Report Creation

Dear All,
I ave an issue in creation of COPA repor in KE30
We have created all P&L item as cost element except
1.Change in WIP for WIP calculation in Product Costing
2. Price Difference (OBYC- PRD) Variance will be calculated from settlement profile
Values in COPA are
1.     VV001 - Quantity (KWBRUM) Quantity field
2.     VV002 u2013 Price (PR00) Revenue account of sales (Cost Category 11)
3.     VV002 - Material Cost-COGS (VPRS)
4.     VV003 - Discount Given (SD Condition) (Cost Category 12)
5.     VV005 u2013 Fright (SD Condition) (Cost Category 12)
6.     VV005 u2013 Misc Exp (SD Condition) (Cost Category 12)
7.     VV006 - Consumption and Cost of Production, Revaluation, inv diff account
8.     VV007 u2013 admin expenses
9.     VV008 - Employees cost
10.     VV009 u2013 financial cost (interest paid etc deprecation cost, audit exp)
11.     VV010 u2013 Settlement of Variances of Production order (from settlement profile)
12.     VV011 - Other income GL accounts (including Exch Rate Diff, profit on sale of asset etc)
From VV005 to VV009 all the GL account included are created as primary cost element (C category 01)
and assigned in OKB9 as transfer to PA structure and assigned in PA transfer FI (direct posting form FI)
VV011 u2013 all the GL account created as Revenue (Cost Category 11)
Issue we are facing
1. In Consumption and Cost of Production GL account (Movement type 101 and 261 from production order ) we are not
able to generate Profit analysis document.
2. Price difference also come in picture at the time of Stock transfer and Price diff GL account is not created as cost element and how to flow that in copa, price difference from settlement will come from settlement profile.
Format we have created for COPA report is like
1.Quantity Field
2.Selling Price (PR00)
3 Material Cost (VPRS)
4 Discount Given
5. Fright
6. Misc Exp
7. Consumption and Cost of Production, Revaluation, inv diff account
8 admin expenses
9. Employees cost
10. financial cost
11 Settlement of Variances of Production order
12. Other income
13 Net Profit (Calculated Values ) ( 2- 3-4-5-6-7-8-9-10-11+12)
Is this a correct logic I applied kindly suggest.
Regards
Bittu

Dear All,
Any suggestion..
Bittu

Sales order values not coming in copa report can been seen in ke24

hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareem

hi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

Cost component structure in copa report

HI Gurus
1We are doing REM Process and costing variant "PREM"
2. We are going for moving average price for all Material type there is no standard cost estimate
3. My client want to see the cost component structure in copa reports like
sales
exice
ram material
packing material
labour
overehad
selling and distributioh overhead
I have done all necessary setting in costing key
I have done pa trasnfer structre also
But Cost component spill is not happening in copa report
Can we get cost component struture in copa report with moving average price if yes
Please advice me how to geneate the report
Thanks & Regards
KISHORE

Hi Aravind
Thanks for your reply, But in our business process there is not Standard cost estimation,bcoz, Price control in material master is MAP. Can we get cost component strudcture in copa if we are going for MAP in MM.
I have done all the Setting IN KE4R also. But i am unable to see the values in COPA report
Thanks
KISHORE

COPA report & G/L balance misatched

Dear Experts,
Will u pls explain me when i see G/L balance of Domestic Sales(G/l number 500000) it come 200050.If i check it through COPA report in same period/year,distribution channel of Domestic sale it shows me different figure.In the COPA repot in top list item when i check FI documents one by one some documents are missing.Pls suggest me how i got correct data in the COPA report and why the documents not seen in COPA reprt.Pls suggest.
Thanks & Regards,
Debashis

Hi
FI - COPA reconciliation is always a tedious task and time consuming.
Download COPA line item data from KE24 and FI balance from FBL3n and compare the balances by record type.
1. Make sure cost element category for your sales GL 500000 is either set to 11 or 12.
2. Check the record type of COPA documents posted in KE24.
3. If the record type is F which comes thru SD/Billing module, check and make sure the FI Balance matches with COPA for this record type. You need to get the FI balance for this record type either by user/Job name or by different doc type.
4. Check if there is any direct FI-PA transfer structure is activated for this GL and if any user posted FI entry with manual entry of characteristics, where by some of the characteristics are not input correct/blank. This is higly prone transaction for FI - COPA reconciliation issue.
5. Check if there is any direct COPA entry posting made thru transaction KE21N. This will result in more/less balance in COPA than in FI.
6. Check if any copa entries are transferred thru external system, and few important characteristics not derived properly.
7. Check KEDR derivations are set properly
8. Check if any other cost element area are allocated to this cost element in Controlling Allocations/distributions/assesments.
9. Last but not the least, check if the COPA report you are checking is able to identify the correct characteristics. If not amend the report based on the data poste.
Regards,
Sekhar

COPA report and purchase order value mismatched

Dear Experts,
In copa report ke30 COGS value come Rs 12129805 and in purchage order it shown 767537.34 which was assigned the sales order.
In KE33 report i checked VRPRS was th value field which data flowing to copa and input parameter recoed type B to F.
VPRS condition type assigned wit VRPRS value field in ke4i(Assignment of SD to copa value field).
Please suggest why data coming mismatch.
Regards,
Debashis

Hi,
There could be difference in material prices mentioned in the PO,
and at the time of PGI/billing. check material prices
Please check material prices for those material for the period.
Regards,
Kedar

Currency type option needed for copa report

Dear Experts,
Currency type option needed for copa report.I have checked all the possibilities in ke35 as well.
how to add curreny type in selection screen for COPA reports.
regards
RK

If you want to create your own report with required currency,
T CODE - KE35 - Click on "Report" (create), next window appears
Give the name of the report and description
The u see 2 options
1. Basic report
2. Report with Form
Select which ever you want and press ENTER
Here you need to prepare the report format and fields which are there in the right side box
Hope it helps
Thanks

Trade Sales Profit Margin in COPA Report

HI,
We have one requirement COPA Report for to know the profit Margin.
Scenario
My client purchase material from Vendor and sale same material to Customer.
Ex: FG Purchase Price 100/- and same material without doing thing then sell to customer 120/-
Present in our system.
Creation of sales order.
Creation Purchase Request against Sales order
Creation of PO.
Creation of MIGO with reference to PO(the material value show special Stock. Its wont update Price and quantity in Material Master)
MIRO
Post goods issue.
Billing
Now my requirement is how to get PGI value in COPA value field. Present there is no ‘VPRS’ condition in SO. I am getting Revenue and Discount values but I am not getting Purchase price.
Please give me your valuable suggestions.
Regards,
Thirumalesh

Hi Thiru
VPRS has to be a part of your pricing procedure.. Only then it updates COGS into COPA
but I am wondering having VPRS would really help in this case, because you are saying the MIGO is not updating Price and Qty in Material Master
Still, I would like you to try with VPRS once, by including it in your pricing procedure
Also, in KE4I (ORKE > Actual Value Flows > Value from SD > Billing docs > Assign Value Fields) - > Here you have the option to map MM conditions also to COPA.. So, explore this by mapping the MM cond to COPA VF
Br. Ajay M

Help- COPA Report KE30 Unusual value problem

Hi,
My COPA report from ke30 showing the bellow value which is unusal to my real value. though we are now entering backlog data but the COGS value which is showing is more less than the actual value. please suggest what to do to correct the report.
Sales quantity            1,958,412.000
Gross Revenue             653593,271.00
VAT                            86,064,276.00
Net Revenue(aftr VAT      567528,995.00
Sales Excess              19,721,488.00
Freight Revenue            5,491,314.00
Total Revenues            592741,797.00
% Based discount              0.00
Quantity based disco       0.00
Material Rebate               0.00
Customer Rebate            9,556,570.00
Free of charge                 3,499.97
Net Revenue(Aft dis) 583188,726.97
Raw Material                       0.00
Packing Material              0.00
Labour Var                         0.00
Raw Material                       0.00
Packing Material              0.00
Labour Var                         0.00
Labour Fix                         0.00
Power Var                          0.00
Power Fixed                        0.00
Mfg OH Var                         0.00
Mfg OH Fixed                  0.00
Packing OH Variable      0.00
COGS                           495040,646.82
COGS Internal price      24,647,600.96
Mfg Cost(Standard)            0.00
Production Variance      28,883,245.46-
Purchase variance          5,002,496.04-
Revaluation of Inven         275,261.45-
Actual Cost               34,161,002.95-
Gross Profit              617349,729.92
Admn Exp                           0.00
Depreciation                       0.00
Finance Exp                        0.00
Selling and Dist Exp          0.00
Thanks
Rajib

Hi rajibimran
There is a transaction (KE27) that reavaluates standard price for actual price.
I dont know how your system is set, but during months all cost elements are set using standard price.
During period end closing, after you run actual costs (CKMLCP) you have to revaluate CO-PA with actual price.
Regards
Fred

Balance Sheet Account Balance in COPA Report

Dear Experts,
My Client Requirement in COPA is: Working Capital Value should be viewed in COPA Report. So the value fileld balance is CA-CL. these operation will be done by blance sheet accounts.
So, Is the Balance Account values will flow to COPA?
Please suggest me with detail.
Thanking in advance,
Regards,
Balaji

Dear sir,
I tried with what you said in KA01. But system showing this message...
G/L account 10000000 is a balance sheet account
Message no. KS036
Diagnosis
G/L account 10000000 is defined in FI as a balance sheet account.
System Response
Balance sheet accounts cannot be created as cost elements in cost accounting, except for:
Asset reconciliation accounts
Material stock accounts for valuated sales order stock for sales orders or projects.
Really I appreciate your response...
Please give me the soulution...
Regards,
Balaji

Exclude a customr from COPA report

We have a COPA report where we have two row in the form (KE35). It's a cost based report
First row - Total sales - the characteristics are by sales document type
Second row - Rebate sales - by Material groups
In the rport (KE33) - they are slecting all customers for all above..
Now I have a requirement to delete one single customer out of the report and I dont's see any option to delete one customer.
Is it possible?

Hi,
I guess, you cna exclude it from the selection variant when you run a report. Of course, if the customer is a part of selection parameters.
Regards,
Eli

COPA report (material name)

Similar Messages

Maybe you are looking for