Exclude a customr from COPA report

We have a COPA report where we have two row in the form (KE35). It's a cost based report
First row - Total sales - the characteristics are by sales document type
Second row - Rebate sales - by Material groups
In the rport (KE33) - they are slecting all customers for all above..
Now I have a requirement to delete one single customer out of the report and I dont's see any option to delete one customer. 
Is it possible?

Hi,
I guess, you cna exclude it from the selection variant when you run a report. Of course, if the customer is a part of selection parameters.
Regards,
Eli

Similar Messages

  • How to restrict a filter to exclude certain values from the report

    Hi,
    I have a scenario,
    I have to filter on date "date of destroy/return" to exclude the batches which are destroyed/returned in the report.
    Thanks,
    Jyothi.

    in the screen where u drag selected dates from left to right...there..
    right click on each of the selected dates..click on 'exclude from selection'..
    u will see icon color changes to RED..
    values will get excluded from selection..
    Vishvesh

  • Impact of negative stock from FI reporting perspective

    Hi Guru's,
    I want to analyse the impact of allowing negative stock for materials from financials perspectvie..
    How will it impact on my Actual price calculation if any.
    Impact from COPA reporting perspect
    Any guidance on this shall be highly appreciated.
    Thanks.

    Hi,
    Stock qty = 10
    Price/unit= RM10
    Total stock value = RM100
    Then, I goods issue 200 unit of stock A
    Stock qty = -190
    Stock value = -RM1900,
    in this case sytem takes the MAP from the material master which is available, as 10 RM,
    Then, I goods receipt 200 unit again at diff cost, & the accounting posting is
    Dr Stock RM 2050
    Cr GR/IR RM 3000
    Dr Inv Adjustment RM 950
    in the above case u have received the GRN with 15RM,
    means the MAP is update with the new price,
    and the difference 950 is also adjusted through inventory adjusted posting,
    rgds
    chenna

  • How i can Select characteristics range like From To in COPA Report

    HI,
    I am creating copa report, I want to know how i can select characteristics with range like From / To.
    e g i want to give period range from 001 To 002 Etc.
    how it is possible while creating COPA report with report painter. (KE31)
    Thanks
    Nilesh

    Hi,
    see SAPNET note 516557.
    Best regards, Christian

  • Copa report from fi posting

    HI,
    We maintained a vendor account number in customer master, when ever we paid any amount to this vendor, it needs to update a copa report as discount. How could I do this?
    thanks & regards
    msr

    Hi,
    So, when you enter Customer invoice (F-22), do you update the Quantity filed (BSEG-MENGE)?
    I posted an invoice (f-22) with quantity field updated and I could see that Quantity value field is getting updated in CO-PA.
    You may also want to check again if you have assigned to correct cost element in PA transfer structure.
    Hope this helps.

  • Issue in COPA Report Creation

    Dear All,
    I ave an issue in creation of COPA repor in KE30
    We have created all P&L item as cost element except
    1.Change in WIP for WIP calculation in Product Costing
    2. Price Difference (OBYC- PRD) Variance will be calculated from settlement profile
    Values in COPA are
    1.     VV001  - Quantity (KWBRUM) Quantity field
    2.     VV002 u2013 Price  (PR00) Revenue account of sales (Cost Category 11)
    3.     VV002 -  Material Cost-COGS (VPRS)
    4.     VV003 -  Discount Given (SD Condition)  (Cost Category 12)
    5.     VV005 u2013 Fright (SD Condition)  (Cost Category 12)
    6.     VV005 u2013 Misc Exp (SD  Condition) (Cost Category 12)
    7.     VV006 -  Consumption and Cost of Production, Revaluation, inv diff account
    8.     VV007 u2013 admin expenses
    9.     VV008  - Employees cost
    10.     VV009 u2013 financial cost (interest paid etc deprecation cost, audit exp)
    11.     VV010 u2013 Settlement of Variances of Production order (from settlement profile)
    12.     VV011 - Other income GL accounts (including Exch Rate Diff, profit on sale of asset etc)
    From VV005 to VV009 all the GL account included are created as primary cost element (C category 01)
    and assigned in OKB9 as transfer to PA structure and assigned in PA transfer FI (direct posting form FI)
    VV011 u2013 all the GL account created as Revenue (Cost Category 11)
    Issue we are facing
    1. In Consumption and Cost of Production GL account (Movement type 101 and 261 from production order ) we are not
    able to generate Profit analysis document.
    2. Price difference also come in picture at the time of Stock transfer and Price diff GL account is not created as cost element and how to flow that in copa, price difference from settlement will come from settlement profile.
    Format we have created for COPA report is like
    1.Quantity Field
    2.Selling Price  (PR00)
    3 Material Cost (VPRS)
    4 Discount Given
    5. Fright
    6. Misc Exp
    7. Consumption and Cost of Production, Revaluation, inv diff account
    8 admin expenses
    9. Employees cost
    10. financial cost
    11 Settlement of Variances of Production order
    12. Other income
    13 Net Profit (Calculated Values ) ( 2- 3-4-5-6-7-8-9-10-11+12)
    Is this a correct logic I applied kindly suggest.
    Regards
    Bittu

    Dear All,
    Any suggestion..
    Bittu

  • Sales order values not coming in copa report can been seen in ke24

    hi
    i have did sd and billing and actual settlement through va88
    i can able to values in ke24 actual line items.
    but when i cant able to see values in ke30 copa report aganist sales order characteristic
    and aganist record type A values are not flowing in copa report.
    please help me.
    thanks
    kareem

    hi ajay,
    i have again prepare actual line items report from ke94 ,ke91 and executed report ,
    here for that particular sales order values are flowing through record type C but not flowing for record type A.
    sales order is not displaying for record type A.
    and for that c only revenue and  and  raw material cost is flowing.
    thanks
    kareem

  • Want to add number of sales orders in a COPA report or form

    Hi All
    I created a COPA report that has two columns: sales from sales orders & sales from billing documents. Now I want to add columns which shows number of sales orders that make up sales. Can any one explain me , how can we acheive this  With a user exit, .
    thanks in advance for looking into this

    Hi Steve,
    Walter is very right in saying so.
    In SD module itself you can get some reports like this.
    Even in COPA you will get these kind reports.  But if your company is a big company and have lots of sales orders,
    Then you will have serious problems with System performance issue. 
    When you define that sale order is a segment level character, then system will ear up the resources and take very long time in executing the reports.
    But for some reason this requirement is a must case, then it is very simple
    you define Sale order in either form or report,
    then give the variable parameters like Co.Code, Period etc. you will get all the sales orders details for the selected period
    But think about not going for it before you make up your mind
    Best Regards
    Surya

  • COPA Report Changes in KE30 for Configured materials - User Exit

    Dear all,
    We are having a configured material with BOM and we are using COPA Report.
    For a given material type we need the row "Other cost of Goods Sold" to be zero since it does not take into account the child materials.
    Is there any userexit to make this happen ??
    Thanks in advance.
    Regards,
    Vivek.

    Hi Vivek,
    KE30 is a Transaction code. If you want to copy a Report associated with this Transaction code then go to transaction code KE30 Provide the data a initial screen. Then go to Utilities->status. A popup screen will be displayed. In SAP data tab There is a field called Program. Copy that program name & go to transaction code SE80 & provide the program name & go for display. Here all the related screens, fields, tables etc. will be displayed then right click on the program name & select copy & provide the target program name starting from Z. Save & activate it.
    Note you can copy the standard program & copy it also but I think it will not take place the standard porgram, you will have to run the progam manually.
    I think BADI or BTE may be available for this transaction.
    Ashven

  • COPA Report current period and previous period issue

    Hi Gurus,
    I have defined COPA report (Tcode KE94) based on line items. Now I want all values to be displayed based on an entry parameter in terms of period. That is to say that  If I give input values of "010.2013" as a period entry , my report should display the values for the the period specified i.e. 010.2013 in the first column and in second column  values for the period 009.2013 should be displayed and in the third column values for the period 001.2013 till 010.2013 should be displayed cumulatively.
    For this, I choosed the character "period/year" in General data selection tab, clicked "Variable on/off" tab and gave values "From"  as well as "To" for the Global Variable "OFP"  which is Curr.fisc.per./year.
    For the 1st column (1st column which is suppose to display the values according to selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From"  as well as "To" for the Global Variable "OFP"  which is Curr.fisc.per./year.
    For the 2nd column (2nd column which is suppose to display the values for the immediately preceeding period of the selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From"  as well as "To" for the Global Variable "OFP"  which is Curr.fisc.per./year. While doing so, I selected operator as "-" and choosed offset as 1.
    For the 3rd column (3rd column which is suppose to display the cumulative values from the beginning of the fiscal year till the period mentioned in the selection parameter), along with the character "company code" , I choosed the character "period" and selected 001 in "From" and 016 in "To" tab.
    Company Code selected in all the three columns is same and I have selected actual values i.e. 0 for "plan/actual indicator" tab.
    When I run the report through Tcode KE30 , I give values as "010.2013" for the From and To selection tabs. System shows the values as per the selection parameter in the 1st column which is correct  but display values same as per coulmn 1st in the 3rd column which is wrong because it should be cumulative. 2nd column is blank. 
    How to display the values for the immediately preceeding period and for cumulative period?
    Regards,
    makrand

    Dear Ajay,
    Thanks for the reply. Here are the screen shots.
    For the general data selection tab
    For the first column "current month" i.e. for the month
    For the second column "Last Months"
    For the third column "Cumulative" i.e. year to date
    Following is the result of KE30
    Values for the period 010.2013
    You can see that values in the report for the period 011.2013 contains value for the previous period which is 59090.21
    This value is matching when the report is run for the period 010.2013.
    But in both the reports,the figures for Current month and YTD (year to date) are same.
    Please let me know what setting is required in the current month column.
    Regards,
    makrand

  • COPA Report Sales Actual value is not getting picked up

    HI,
    I have creted a COPA REPORT that is Plan vs Actual
    all values are getting picked up in report except sales actual value .
    could you give us some informatin regarding the same ?
    In column actual sales i have selection characteristics 0 only
    And my general data selection is Record Type is From A To I
    Thanks
    Nilesh R

    HI,
    I have creted a COPA REPORT that is Plan vs Actual
    all values are getting picked up in report except sales actual value .
    could you give us some informatin regarding the same ?
    In column actual sales i have selection characteristics 0 only
    And my general data selection is Record Type is From A To I
    Thanks
    Nilesh R

  • How to exempt vendor from 1099 reporting

    Hi All,
    On the vendor master, Accounting information tab, we have fields "Exemption number,Valid until and exemption authority" with respect to withholding tax. As per my understanding if we enter these fields, then that particular vendor should not be considered for 1099. However these fields are not having any impact on my 1099 reports. I am running standard report S_ALR_87012143 for validation. Can anyone guide me the relevance of these fields and how to use them correctly in business scenario? Also let me know how to exempt a vendor from 1099 reporting.

    Hi - The exemtion number is entered so that the system does not withhold tax amount (eg: 30% or so) when the payment is made. I think the vendor will still appear on the 1099 report. You can use a different Withholding Tax type for these vendors and exclude the WT type when you run the 1099s.

  • COPA report & G/L balance misatched

    Dear Experts,
    Will u pls explain me when i see G/L balance of Domestic Sales(G/l number 500000) it come  200050.If i check it through COPA report in same period/year,distribution channel of Domestic sale it shows  me different figure.In the COPA repot in top list item when i check FI documents one by one some documents are missing.Pls suggest me how i got correct data in the COPA report and why the  documents not seen in COPA reprt.Pls suggest.
    Thanks & Regards,
    Debashis

    Hi
    FI - COPA reconciliation is always a tedious task and time consuming.
    Download COPA line item data from KE24 and FI balance from FBL3n and compare the balances by record type.
    1. Make sure cost element category for your sales GL 500000 is either set to 11 or 12.
    2. Check the record type of COPA documents posted in KE24.
    3. If the record type is F which comes thru SD/Billing module, check and make sure the FI Balance matches with COPA for this record type. You need to get the FI balance for this record type either by user/Job name or by different doc type.
    4. Check if there is any direct FI-PA transfer structure is activated for this GL and if any user posted FI entry with manual entry of characteristics, where by some of the characteristics are not input correct/blank. This is higly prone transaction for FI - COPA reconciliation issue.
    5. Check if there is any direct COPA entry posting made thru transaction KE21N. This will result in more/less balance in COPA than in FI.
    6. Check if any copa entries are transferred thru external system, and few important characteristics not derived properly.
    7. Check KEDR derivations are set properly
    8. Check if any other cost element area are allocated to this cost element in Controlling Allocations/distributions/assesments.
    9. Last but not the least, check if the COPA report you are checking is able to identify the correct characteristics. If not amend the report based on the data poste.
    Regards,
    Sekhar

  • Exclude Master Pages From RH8 Search

    Is there a way to exclude master pages from RH8 searches? There is no option in the Master Page properties as with topics.
    What I did: I created a Master Page to add a "Download PDF version" link to the PDF version of the Help, in the same way that  RJ Jacquez did in his "Web 2.0 Documentation using Adobe AIR and RoboHelp 8 OnDemand Recording" tutorial. The difference is that Jacquez's sample used an image as the link, while I used text.
    Problem: "Download PDF version" is prepended to all search results (in the context line).
    The obvious workaround is to replace the text with an image representation instead. But I thought I would ask the question about master pages and searches anyway.

    Hi Jason
    I think you misunderstood me. Note that Master Pages may be used in different ways.
    They may be used as a starting off point for a topic. You create the topic, and much like a Word template, the Master Page partially builds the topic by having certain elements already in place. From there forward, you customize the topic to your needs. Subsequent changes to the Master Page have zero effect on any topics created from them.
    They may also be used to configure a Header and a Footer. You then associate the Master Page with the Header, Footer or both to several or all topics to give the associated topics the Header or Footer information from the Master Page. In this case, subsequent changes to the Header or Footer in the Master Page DO actually appear in all associated topics.
    I was talking about the latter option. I wasn't suggesting you move things into the HTML Head area of the topic.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • XML output from Repostiory Reports

    Hi,
    Any ideas why the table definition report (cktci.rdf) data from the Repository Reports cannot be generated to XML?
    I'm running Designer ver. 9.0.2.91.9, Reports ver. 9.0.2.0.3 . XML is not on the destination format list in Repository Reports, but if you type in xml, the DESFORMAT parameter is correctly set to it. However, only part of the data model is output to the xml file:
    <?xml version="1.0"?>
    <!-- Generated by Oracle Reports version 9.0.2.0.3 -->
    <CKTCI>
    <LIST_G_IRID>
    <G_IRID>
    <IRID>*****</IRID>
    <NAME>SODO</NAME>
    <LIST_G_LEV>
    <G_LEV>
    <VERSION>1.8</VERSION>
    <LEV>0</LEV>
    </G_LEV>
    </LIST_G_LEV>
    <CS_TABS>1</CS_TABS>
    </G_IRID>
    </LIST_G_IRID>
    <D_USERNAME>REP_OWNER</D_USERNAME>
    <D_USERNAME1></D_USERNAME1>
    <F_COL_DET>N</F_COL_DET>
    <F_VW></F_VW>
    <F_SNP></F_SNP>
    <TABLES_YN>Yes</TABLES_YN>
    <VW_TYPE>No</VW_TYPE>
    <SNP_TYPE>No</SNP_TYPE>
    <COL_DET>Yes</COL_DET>
    <D_TABTY1></D_TABTY1>
    <CF_PROP_NAME></CF_PROP_NAME>
    <P_NULL_IND>Optional ? : </P_NULL_IND>
    <P_DOMAIN_NAME>Domain : </P_DOMAIN_NAME>
    <P_UPPERCASE>Uppercase ? : </P_UPPERCASE>
    <P_ORAC_SEQ>Sequence : </P_ORAC_SEQ>
    <P_DEF_VAL>Default Value : </P_DEF_VAL>
    <P_ORD_SEQ>Order By Sequence : </P_ORD_SEQ>
    <P_SORT_ORD>Sort Order : </P_SORT_ORD>
    <D_YN></D_YN>
    <D_YES>Yes</D_YES>
    <D_NO>No</D_NO>
    <D_NULL>Yes</D_NULL>
    <D_NOT_NULL>No</D_NOT_NULL>
    <D_NULL_IND></D_NULL_IND>
    <D_VERSION>1.8</D_VERSION>
    <D_CONTAINER>ZSI-WARTA/SODO</D_CONTAINER>
    <D_VERSION1>&nbsp</D_VERSION1>
    <D_CONTAINER1>&nbsp</D_CONTAINER1>
    <COUNTER>*****</COUNTER>
    </CKTCI>
    The biggest problem is that the main group G_APP from the report definition is not generated to XML, in spite of its parameter "Exclude from XML Output" being set to No. Any ideas why this happens?
    Regards,
    Tomasz

    hello,
    you can specify the look of the XML tags in the "XML Settings" property of the respective field. so let's say your datamodel has the colun called NAME then by default the xml tag would look soemthing like this
    <NAME>this is the value </NAME>
    now if you set the value for the
    "XML Tag" property and the "XML Tag Attributes" property to e.g. facet and name="his-name"> (the * is just to terminate the the values in this text) the generated XML tag would look something like
    <facet name="his-name">name="his-name"></facet>
    columns that are not in the datamodel (like i asume you mean by <stuff> and <futurestuff> you can create by adding formula columns into your datamodel. formula columns have the same "XML settings" section in their property sheet and can be modified accordingly.
    hope this is what you are looking for.
    thanks,
    ph.

Maybe you are looking for