Copy items without baseref

Hi all,
I'm having the following issue.
When I'm copying from an Invoice, and I'm choosing the Customize option. I'm selecting the rows I need.
When I click Finish, I need to remove the BaseRef, BaseType and BaseRow columns.
I'm doing this by clearing the matrix and adding the items myself.
But I've got an issue with this approach. The first item that I readd to the matrix, does get the BaseRef, BaseRow and BaseType settings. This only happens with the first item. I also noticed when i'm adding items hardcoded, for example "Item 2". And in my matrix there isn't any "Item 2" selected, this doesn't happen.
Any ideas ?
Kind regards

Hello Hans Renard,
Tip:
On the customizing screen, at last step, when you selected the items, and press the ok button, you may stop the UI (Bubbleevent=false), and copy the selected items with the values from your code. it is easyier to do, to fill an empty matrix, than remove lines from existing matrix.
You can loop over the selected rows of the matrix a " Customize option", and add items to invoices......
Regards
János

Similar Messages

Outlook 2013: Imported or copied items from .pst file disappear after a few seconds

I am migrating from an open source email platform (Axigen) to Outlook/Exchange 2013. The Axigen system uses a connector for Outlook allowing users to use Outlook as a client.
To move from Outlook 2010 with the Axigen server to Outlook 2013 with Exchange I have exported the entire mailbox from Outlook 2010 to a .pst file which I am then trying to import into Outlook 2013.
The import process appears to complete successfully and the imported items show up in Outlook 2013 - but only for a second or two. Then they disappear completely, nowhere to be found. This happens with ontacts, emails and calendar items and the result
is the same whether I import the entire mailbox or just a folder at a time.
If I OPEN the .pst file into Outlook 2013 everything in it looks perfectly OK, I can view items with no problems, all folders are there with their correct content. Now if I try to move or copy
items from the opened .pst file into the Outlook 2013 mailbox, I get the exact same symptoms as when importing. Items show for a couple of seconds and then disappear. If I copy or move a
folder, the folder remains in the Outlook 2013 folder tree but the items in it disappear.
Why would items be perfectly visible and readable from an opened .pst file but disappear when they are copied into the new 2013 mailbox?
They are not visible in OWA either, btw, so this is not just Outlook not displaying them, they are really gone. Checking the folder size in Outlook shows an empty folder (size 0, 0 messages). I have tried the /cleanviews switch when starting Outlook.
This has me completely stumped. Any ideas?
Thanks in advance!

More strangeness:
I set up an Android phone to sync with this account just now. I imported my contacts list from the phone into the Exchange account. After sync, all the contacts are perfectly visible on the phone, but NOT in Outlook 2013 or in OWA...
So maybe it is some sort of display filter thing after all?
That's unbelieveable that message is visiable in Android phone through Exchange ActiveSync but cannot be viewd in OWA...
For the database session, we may enable
Exchange Mailbox Audit logging(http://technet.microsoft.com/en-us/library/ff461937(v=exchg.150).aspx) to check if the message is indeed upload into DB from Outlook.
For the client level, please enable Outlook logging to log what happens inside outlook to aid in your troubleshooting.
We can enable Outlook logging in Outlook 2013 under File > Options > Advanced > "Other" section
Log files are created as .etl files and stored in %userprofile%\Local Settings\Temp. A new log file is created each time Outlook starts.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected].
Okay, I have enabled Outlook logging. However I cannot find any way to read those .etl files.
I also enabled audit logging in Exchange but as I understand it that will not log operations performed by the mailbox owner, only non-owner access.
I think I am close to giving up on this. I can't believe an enterprise email platform will simply delete messages copied into a mailbox without any error message whatsoever, and no way for an admin to track what is happening.
It is definitely happening when syncing with Exchange, so there must be something in these items (and
remember this happens not only to email messages, but also to Contacts) that makes the Exchange server decide these messages should be discarded witout warning.
One other thing: Folders copied from the .pst are visible on Outlook (although their contents are deleted) but not on ActiveSync clients. If I create a new folder in the mailbox, it syncs as it should.

Need help with "Copy items to the iPhoto Library" option

I originally unchecked the "Copy items to the iPhoto Library" option because I wanted to keep my own file structure; however, I now want to get rid of my file structure and just import all pics into iPhoto library without losing all the editing and face recognition work I did. If I create a new library, I will have to redo all the editing which is a massive amount of work. I have a 50+GB library.
iPhoto 11 on MacBook Pro - Lion OS.

Unless you can hack an sql database, there is no way to do what you want, I'm afraid.

After a library has been created with the "Copy items to the iPhoto library" option unselected, can it later be made to create those copies?

iPhoto 9.4.3
iPhoto Library Manager 3.6.8
MacBook Pro - OS X 10.7.5.
I have a large number of iPhoto libraries, organized with iPhoto Library Manager, that I created with the "Copy items to the iPhoto library" option unselected because I wanted easier access to the individual files. I am now going to be migrating to a new computer and have run into some problems with iPhoto losing the path to the file, and as a result showing me the exclamation point of doom. What's more, the program doesn't seem very intelligent about rebuilding those lost connections, and I have to go back through and correct it manually almost one at a time. How do I get around this problem?
If I rebuild my new computer from a Time Machine backup (I usually enjoy taking this opportunity to start from a clean slate, but...), will the paths all be preserved without me needing to abandon my organization system?
Or is there some way to ask iPhoto or Library Manager to create and organize copies of all the photos in the library that are not currently present within the library?
On a tangentially related note, what's the best way to save keywords (and ideally also faces) added in iPhoto to the photos' meta data?
Much obliged.

Not with iPhoto by itself. If you have the lastest version of Aperture and iPhoto referenced libraries can be converted to managed with Aperture.
You can convert to a managed library with iPhoto Library Manager by rebuilding the library with iPLM. This will create a new, managed library with all your photos in it and with all Events, albums, keywords, titles, descriptions and places intact. However, books, calendars, slideshows and cards will not be retained. They will end up as albums containing the photos.
OT

Copy items to the iPhoto Library option doesn't seem to work

Hi, I'm using 7.1.1 and if I:
1. De-select the create "Copy items to the iPhoto Library" option in Preferences/Advanced
2. Create a new library
It doesn't seem to work. The images are still being copied into the library -- that is, if I show the package contents of the library, the data directory has the photos. Additionally, if I do something like open, modify in photoshop and save one of the imported files, it doesn't show up in iPhoto. Likewise if I modify the file in iPhoto and then look at the photo in the file system using Preview or Photoshop, the iPhoto changes don't appear.
Is this a bug? Is it not supposed to work like this? I believe that if I say "don't copy the files into the library" it means that it uses my original photos in their original location and that changes I make in iPhoto modify and manipulate the original files.
I've tried this on two different machines and get the same results. Anyone have any ideas?
Thanks!

markand:
Welcome to the Apple Discussions. It's not a bug. You don't understand correctly how iPhoto works in the "referenced" library mode. The Data folder contains the thumbnail files that iPhoto creates and needs to operate. The Originals folder will contain alias files linked to the source files at their location. Any edits, by iPhoto or by Photoshop configured correctly will result in a modified file in the Modified folder of iPhoto. *You should not open, rename, move or edit any file in the library package from the Finder.*
Using Photoshop to edit photos in iPHoto must be done by selecting PS as the editor to use in iPhoto's General Preferences section. Then follow the instructions below to edit photos correctly:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Using PowerShell 1.0 copy-item GroupPolicy Folder(C:\WINDOWS\system32\GroupPolicy)

Hello everybody,
This is my first time posting in this forum and i have encounted an issue i hope you can help i'm trying to create a powershell 1.0 script as this is for Windows XP to copy default policy back to their original folder then do a gpupdate on the copmuter so
that the Local policy are returned to their default but i'm having access denied as this is user account and needed a way to make it run as an administrator but without success as i'm new powershell.
Copy-Item 'C:\WINDOWS\system32\GroupPolicy\Original Group Policy for User and Machine\Machine\*' 'C:\WINDOWS\system32\GroupPolicy\Machine\'
Copy-Item 'C:\WINDOWS\system32\GroupPolicy\Original Group Policy for User and Machine\User\*' 'C:\WINDOWS\system32\GroupPolicy\User\'
Your help is much appreciated.

Hi mniceguy81,
Did you try to enable "run as" in XP ?
Please refer to following link :
http://support.microsoft.com/kb/294676
And please try to use powershell command :
$cred = New-Object Management.Automation.PSCredential("$UserName", $securePassword)
copy-item xxxx xxxx -credential $cred
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Copy items to large number of users

I am a wee bit new to ARD and have (what I'm sure is) an easy question. I'm trying to copy a file to a specific path inside each user's home folder. is there a way to do this in ARD without having to type in each user's LDAP account name in each of the paths?

This is ABSOLUTELY possible.
We used this at my school to copy files to a PARTITION which was not the boot disk.
The ARD computer is turned off and unaccessible at the moment, but the functionality is in the COPY ITEMS interface.
Select a group of computers in the Scanner, add them to All Computers. Select the Targets and then choose the COPY button on the top of the screen. The first PULLDOWN menu has a choice which will let you enter a PATH to a directory.
To get the path, I used ARD to control one of the targets and I then dragged the partition into Terminal to get its path as Text. I copied that on the client, then exported the clipboard to the ARD control machine and then I could use the path to target the copy.
Of course, the partition and path name need to be the same on all the client computers.
Good luck. This is DEFINITELY POSSIBLE.
Just a caveat though, it uses MULTICASTING to broadcast the files out over your entire network. We have IP phones here and trying to push out 50GB of data as multicast is crashing our phones. I'm searching this message board to find a way to PREVENT MULTICASTING.

ARD 3.5.1 fails to copy items

I'm using ARD 3.5.1 on OS 10.6.8, and until today, I've been able to copy items to client machines with the same system without much trouble.
Suddenly, today, ARD won't copy files. That is to say, when I use the "Copy" button from the Remote Desktop window, and select one computer or a group of computers to copy a small file to, the copying process hangs at "Waiting for Item" and then fails a few seconds later. I am also not able to drag files from my computer onto the controlled computer.
Some things I have tried:
Changing the owner and location of the file I'm copying
Removing the computers from the "All Computers" list and adding them back in to the computers I control again
Quitting ARD and restarting it
Using ARD from the Server instead of my computer
Oddly, I am still about to Control and Observe.
Actually I just realized something... I'm running a copy of ARD on my laptop, but also have it installed on the teacher's station of the computer classroom I'm administering, as well as a copy installed on the server. The teacher's station copy is able to successfully copy files, while my copy and server cannot.
That said, up until a few days ago, I was able to copy files from my laptop and/or from the server.
We do have two different serial numbers for ARD, I'm not sure if that's causing the problem. I mean, it wasn't causing a problem until today.

This is a link to a previous thread with a similar problem. The solution by Scooter Magrooter of resetting the task server is the one that works best for me. Hope this helps you.
https://discussions.apple.com/message/16201614#16201614

ITunes/iPhone stuck contacting update server preparing to copy items

Why is Preparing to copy items stuck?
Why is Contacting the iPhone software update server stuck?
I have an iPhone 6 Plus running 8.1. I have not updated to 8.2 yet. My phone was syncing normally until 7pm lastnight but now it is stuck at Preparing to copy items Step 5 of 5. For background information; I am a DJ and use my phone to screen songs so I regularly sync songs on/off and use iTunes Grouping and Comments to organize tracks. I may listen to songs and sync the phone multiple times a day and this was done without problems on 3/24/15 at least 4 times until after 7pm.
I have done a hard reset on the phone. I have restarted my Macbook Pro, done a Force Quit. I have tried to uncheck Sync Music to remove all music and start over. I let this sit for over an hour with no success. Today (3/25/15) I attempted to update the phone to iOS 8.2 but the computer sits at Contacting update software server and no progress is made. There are multiple posts online with this issue as well.
I did allow some Apps to update yesterday but I do not recall which ones. So, whats the deal?

Watashi mo wakaranai! Each time I reset my iPhone 5 and then I get one go after that to re-sync new data to the unit before having to reset again. This morning I reset and began to start loading everything from scratch again, only to realise this afternoon that the sync had deselected a number of PDF's that I need to access from my iPhone regularly throughout my working week. When I re-ticked those files and asked the sync to resume, iTunes stopped everything and left my iPhone without all its data synced. I have had to asked it to sync a third time now.
Oddly, the amount of space indicated at the bottom of iTunes doesn't seem to relate to the amount of data being loaded in a coherent or reliable fashion, as more space is showing now that when the PDF's were (unbeknownst to me) deselected. Also, even when there is as much as 9GB showing as free on my 64GB unit, iTunes tells me that there is insufficient space available on my unit to sync: This forces me to reset again! It takes more than 24 hours for the iPhone 5 to load 50GB odd of data... I remember when we were told how computers saved us time.

Copy item for Invoice

Hi,
Copy item functionality is working while creation of PO and shopping
cart. In case of invoice item copy, icon becomes inactive after data
entry. We can't copy item to create new item from old item.
What could be the reason for it?
Regards,
Rahul Mandale

Hi
So I guess your problem is resolved by Applying the OSS note 1040024.
Incase your problem is not resolved, do read this.
Else, anyways, please close the thread as answered.
Since this OSS note is not available in English, I am pasting the program correction details in English here.
Applicable to SRM 550 - SAPKIBKT08
Programm-ID Objekttyp Objektname Programm-ID Objekttyp Objektname
LIMU REPS LBBP_IV3F2F R3TR FUGR BBP_IV3
FORM SCREEN_FIELDS_4000_PREPARE
Delta 001
Context block
 LOOP AT gt_screen_itm TRANSPORTING NO FIELDS WHERE unassigned IS NOT INITIAL AND
 selected = gc_yes.
 EXIT.
 ENDLOOP.
Delete Block
 IF sy-subrc <> 0.
Insert Block 
IF sy-subrc <> 0 and
* copy as well for invoices without PO
 ( not gt_screen_itm-BE_LOG_SYSTEM is initial or
 not gt_screen_itm-BE_OBJECT_TYPE is initial or
 not gt_screen_itm-BE_OBJECT_ID is initial or
 not gt_screen_itm-BE_REFOBJ_TYPE is initial or
 not gt_screen_itm-BE_REFOBJ is initial or
 not gt_screen_itm-SRC_OBJECT_TYPE is initial or
 not gt_screen_itm-SRC_GUID is initial ).
Hope this will help.
Please reward full points, incase it suits your requirements.
Regards
- Atul

Syncing iPad2: PLEASE HELP ME! My iPad2 has been stuck on step 8 of 8 for a day now - waiting to copy items. What can I do to fix this? Nothing is actually happening! I'm running ios5 on an iPad 2.

I recently upgraded to to the iOS 5 on my iMac and iPad. Now when i sync my iPad it get stuck on step 8 with a prompt that says "waiting to copy items" it stays on like that for hours. When I eventually do disconnect my iPad it says sync is not complete. Now, some of my album artwork is not copied into my iPad but on iTunes in my iMac desktop everything is still there. Pulling my hair out with this one. Please help!

my iPad it get stuck on step 8 with a prompt that says "waiting to copy items" it stays on like that for hours
Reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
I recently upgraded to to the iOS 5 on my iMac and iPad
You don't need to manually sync using iOS 5.
Help here > Apple - iCloud - Learn how to set up iCloud on all your devices.
Message was edited by: Carolyn

Bug while copying items on a page.

When I create a new page item via copying from existing page item it fails with the below error code, if there is > or < character in the source of the existing item.Error Source contains <, > or " which are invalid characters. It works fine if I create new item using wizard and then have the same source. I use div tags in the source of my display only items.
If this is a bug, can we get it fixed in the upcoming release.
Thanks,
Manish

Hi Manish and Scott,
I also concur and have filed bug #14724684. Specifically this appears to occur when the 'Source' value contains either <,> or ", and only when copying items as you say. I'm afraid this will not be fixed for 4.2, but we will aim to fix it for the first patch set. Interestingly, the item does still get copied despite the error, (which I'm sure you noticed anyway), but just thought I'd mention it in case that's of use to you or others as the error won't stop you from copying items containing these characters in their source.
And yes, Scott I agree with the DA copy wizard and have made a note to improve this for our next release. Thanks for mentioning it.
Regards,
Anthony.

Using a text file to provide paths for copy-item

OK, please don't beat me over the head too much for this. I've been trying various methods all day and nothing seems to be working. I have a text file that has a list of folders (full paths including drive letters). I want to copy all of
the folders and their contents to another path. The destination path does not change (d:\temp\destination) but each of the folders in the text file should end up being subfolders of the destination
Sources:
d:\source1 (has file01.txt, file02.txt)
d:\source2 (has file03.txt, file04.txt)
Destination
d:\temp\destination
Should end up with something like
d:\temp\destination\source1\file01.txt
d:\temp\destination\source1\file02.txt
d:\temp\destination\source2\file03.txt
d:\temp\destination\source2\file04.txt
I've tried
Copy-Item -Path D:\Temp\paths.txt -Destination D:\Temp\attachments -recurse -Force
which just copies the file that contains my paths.
I've tried
foreach($line in (Get-Content -Path D:\Temp\paths.txt)){$dest_folder="D:\Temp\destination" | Copy-Item -path $line -destination $dest_folder -force -recurse}
I get an error that says
Copy-Item : The input object cannot be bound to any parameters for the command either because the command does not take
pipeline input or the input and its properties do not match any of the parameters that take pipeline input.
Would anyone mind helping me out here? If I need to create a file that has the source foldername as well as the destination path, I can do that, I just figured there has to be a way to specify a base directory and let powershell do its thing from there.

try
$SourcesFile = ".\sources.txt"
$Root = "d:\temp\destination"
foreach ($Source in (Get-Content -Path $SourcesFile)) {
$Destination = Join-Path -Path $Root -ChildPath (Split-Path -Path $Source -Leaf)
Copy-Item -Path $Source -Destination $Destination -Recurse -Force
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Error While creating a regular item without any demo data.

Hi All,
In RMS13.1.1, during creation of an item without any demo data, and entering all the required inputs on the item master & itemsupp form. When we click on “Retail by Zone” the following error message got displayed “Exchange rates does not exist” on the Item Retail Price by Zone window form.
Thanks,
Sushanth.D
Edited by: user10680684 on Jul 13, 2010 2:51 AM

What you can do is open the Form's fmb code in Forms Developer IDE, or switch on session level or database level SQL_TRACE to see the SQL statements that the Form is firing to the database. (Find the tracefile in the udump folder). Replaying the SQL statements from the SQL trace file in e.g. SQL*Developer may lead to a cursor or block that e.g. does not return any rows. You may need to replace bind variables' placeholders (:a1 etc.) found in the trace file with the relevant business values for your items, zones, etc.
Good luck and let us know how you progress,
Erik Ykema

G/L account item without tax code in document with deferred taxes

Hi ,
While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
Please guide what could be the problem in the Discount Condition?
Thanks and Best Regards

whats this Z condition type. Is it a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check whats the GL Account assigned to this Account key (VKOA).
Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
Hope this helps
Regards
Sai

Copy items without baseref

Similar Messages

Maybe you are looking for