Copy multiple Roles at a time

Is there some way to copy multiple Security Roles(PFCG) into new Roles?
I do not want to copy several roles into 1 role(composite role)
Rather, I want to make copies of several roles at one shot.
Currently PFCG allows only copying 1 role into a new role
Thanks
Edited by: Gautam Poddar on Feb 21, 2008 11:13 AM

HI,
I use a little workaround to copy a set of single roles at once:
1. create a new composite role
2. add the roles a want to copy into this composite role
3. copy the composite role
4. a popup asks me, if I want to copy the single roles as well. A-->YES!
    (thats the trick).
5. Now a popup appears with the list of all single roles of that comp. role. In the right window I add the new names of the single roles.
6. After the copy is done, I remove the new single roels from the new composite role and delete the new composite role (and the same of course for the old composite role without deleting the old single roles)
b.rgds, Bernhard

Similar Messages

  • Remove transaction codes from multiple roles at a time

    Hello,
    how to remove transaction codes from multiple roles at at time?
    Thank you in Advance.

    Hi Vanita,
             Why do you want to remove a t-code from all the roles. Are you no longer going to use the t-code. If this is the case then you can lock the transaction code in T-code SM01 so that no one can use it. But this would effect other users as well, it should only be locked if no one should use the particular T-code.
    Another alternative is to write a program to remove the particular T-Code from the table AGR_TCODES where the relation ship between the role and t-code is stored.
    Thanks.

  • Mass transport: how to select more than 7 roles at a time

    I have about 50 roles I need to transport.  I would like to use mass transport, but when I select all 50 roles, only the first 7 are actually added to the transport list. 
    I have to repeat the selection many times before all the roles are included in my transport request.. still a rather time consuming process.  How can I select more than 7 at a time?

    > And now we're back to my original problem. 
    Oh, dear....
    > We have a structured role naming convention that would make it very easy to select with wildcards.. however, when I try to do it that way, the system won't let me select more than 8 roles at a time.
    This is where I think you do not have a problem but a misunderstanding. Never mind, we see those quite often.
    > See if you can reproduce this problem in your environment:
    I had to start it first (minisap Nw2004), renew the license and wait for the transport tool to compile. You've got me busy here on a saturday
    > 1. Start PFCG
    done
    > 2. Utilities -> Mass Transport
    yep, watched it compile.
    > 3. Click multiple selection button
    yep
    > 4. Enter a mask that would match more than 8 roles,
    yep
    > press F4
    NO! NO! NO! NO! NO! NO! NO! NO! NO! NO!
    This is where the misunderstanding starts
    > 5. Click select all (make sure more than 8 roles are selected)
    No
    > 6. Click copy button
    No
    > 7. Observe that only the first 8 role are actually copied to the multiple selection list
    Instead, hit F8 where you have hit F4 and find out all roles that fit the mask will be entered into the transport.
    You have mixed up the actual report selection and the search functionality of the selection screen. Play with it, it's fun.
    One word of caution: Mass transport can cause perfromance problems and errors. I always try not to enter more than 500 roles into a transport at a time.
    Cheers!
    Jurjen

  • Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

    Hi All,
    I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
    The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
    The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
    The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
    Test Disk 3" as follows:
    The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
    After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
    It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
    Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
    If you modify the data in the SharedVolumeMappings value in both
    0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
    The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
    and would be prone to errors that could cause further problems.
    Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
    My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
    Many thanks in advance,
    Tom

    Hi Subhasish,
    Thanks for the reply, glad that its something that is reproducible!
    Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
    If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
    VMs?
    Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
    Thanks again,
    Tom

  • How i can create multiple users at a time (User Administration) in EP

    Hi
    I need to create multiple users at a time. How can i do that through User Administration in EP.
    Please also tell me about import option in User Administration

    Hi,
    1.  First of all create a master user based on which you can create multiple users.
    2.  when you are done with it  export (by selecting the option at user creation) it.
    3.  you can see some text in a window copy it create  a txt file with it, and add as many users as you want
         by cpoy pasting the text multiple times and making necessary change as per the names etc...
    4. save the txt file.
    5. goto import option you were talking about and import the text file and update it.
    6. As it gets updated you are done with the creation of multiples users.
    If you  get stuck somewhere  feel free to  let me know.
    if  this answer satisfies your need, award points and close the thread.
    Edited by: ali alia on Feb 10, 2009 6:21 AM

  • Displaying multiple roles related to a single key value in a single view MVC 4

    Dear Team,
             My name is Ajay Sutar. I am newly learning MVC 4, as we are about to initiate a new project in ASP .NET MVC 4. I am using a details scaffolding to display a  single
    record. but now my single employee have multiple roles. As example,
     Emp_no    |    Role                     | Salary 
     E1             | Software Engineer  | 10000
     E1             | Tester                     | 10000 
    as i have used Details scaffold and FirstOrDefault method of linq for this view, I am unable to display the second role "Tester" in the  output. only first role is geeting displayed.
    What i want is :
    Emp_no : E1                 Role: Software Engineer                  Salary:10000
                                                  Tester 

    Hello,
    Welcome to MSDN forum.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is there a way to copy multiple sheets in a Spreadsheet into a new Spreadsheet?

    One of my spreadsheets is buggy, crashing each time I try to save the changes I've made. Figure I need to start from scratch with a new one. But this spreadsheet contains many months of sales (each month being a page). How can I copy multiple pages to paste them into the new spreadsheet?

    That's just it: When I Select All to Copy, only the current sheet I'm looking at is Copied. How can I copy ALL the sheets? Is this not possible on an iPad?

  • Yosemite 10.10.1 will not allow me to copy multiple files to a NAS -error file in use, but other OS OK.

    I am running Mac OS 10.10.1 on a Mac Mini with 16G.
    I have a Buffalo NAS and wanted to copy files from one folder on the NAS  to another on the NAS.
    Under Yosemite I can only copy them one at a time. If I try to copy more than one I get an error message that the file is in use.
    Under SNS 10.6.3 (running under Parallels) I can easily copy a large number of files.
    Again under 10.10.1 I get the same problem when copying from my desktop to the NAS.
    The files are definitely not in use elsewhere and in any case if they were I wouldn't be able to copy one at a time.
    When I try to copy multiple files the OS creates greyed out icons of all the files to copy and then aborts when it actually tries to copy the first file.
    Any clues please, my current work around is to compress all the files to move, move the archive, expand the archive. This is not going to work for very large numbers of files - l'll be at it all day.
    Tony

    I have been unable to drag and drop large files, even onto the Desktop, let alone onto my NAS - I get the dragged files freezing in the middle of the screen or I get the 'unable to copy / file in use' error.
    Talking to Apple Support, they had me set up a new User, and then within that new account, the trouble went away. This pointed to the StartUp items being run in the original troublesome account,
    I have deleted all of my 3rd Party programs and then installed them one by one until the problem came back, and in my case (Macbook Air 5,2 running 10.10.3 Yosemite) I found it was DropBox causing the conflict. I have DropBox running in the Menu Bar (top of screen) and disabling sync (bottom left corner) stopped the file copy problem. Try disabling DropBox sync is file copying is failing?

  • Copied Business Role in Solution Manager ITSM

    Hi All
    This is eunhwa.
    I have a question regarindg copied business role in Solution Manager ITSM.
    To copy business role, I copied technical roles Navigation profile, configuration key and PFCT Role ID. And then I copied
    a business Role. And assign copied technical roles to copied business role.
    And I changed Direct link group UI. For example, in copied business role ZSOLMANPRO, There were many
    direct links, I only left ‘incident’ and ‘problem.
    However when I selected incident’ in direct link, there was no transaction ‘zmin’ assign. I couldn’t create a incident.
    Why this error happened? Is there anything which I miss?
    Thanks.
    Best Regards,
    Eunhwa Park

    Hi,
    Well, there are multiple things you can check.
    1. If you are using IE
    You have to add the page/pop-up to the compatibility mode of your Browser.
    IE -> EXTRAS -> Settings for Compatibility Mode -> Add -> Refresh the CRM WEB UI
    2. Check if you had assign SM-CREATE in the ZSOLMANPRO Navigation profile. (In Assigning the direct link groups to Nav. Bar profile.
    3. Check whether you had authorizations for ZMIN in PFCG profile.
    4. Additionally check
    1905448 - How to restrict the suggested transaction codes when creating an ITSM
    Incident using CRM Web UI - Solution Manager
    5. In define transaction types corresponding transaction types are active. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
    6. Check the copy control whether they are fine. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
    7. Ensure that the transaction type's channel definition in customizing is set to 'CRM Web-Client UI'
    If your issue is still not resolved yet, please paste the error/screen you are getting.
    Regards
    Rishav

  • Report to fetch assigned transactions for multiple role.

    Hi,
    I am looking for some report or the way, i can get the list of transaction assigned to multiple roles in one go.
    Actually i tried SUIM, but here i have to specify one role at a time and have the list of transactions assigned to it.
    My scenario is, i have around 100 composite roles. Now there is a requirment for a report, which gives information of transactions assigned to each role. If i do it one by one, i have to do it for 100 times.
    Please suggest the best and quickest way.
    Thanks & Regards,
    Pravin

    > Another way could be to look into the AGR_1251 table for object S_TCODE values. But, this will populate transactions that could possibly not have included intentionally (in the menu). For eg there are many transactions which need authroization for another tcode in the background which have to be inserted as an authroization value.
    Which is good, because those are the actual tcode rights, not only the intended ones......
    To do this for composites I disagree with Julius on using Excel or Acces
    Try the SAP query tools, they're there for you. If you go to the quickviewer (SQVI) you can easily join tables AGR_AGRS and AGR_1251 by AGRNAME. Now if you look for object S_TCODE you can see the relation between a tcode assignment and a composite role.

  • If possible, How do I copy multiple PDF pages to a word document?

    I know how to take a snapshot of one PDF page at a time and copy to a word document; however, I do not know how to copy multiple PDF pages at once. Is it even possible? I would love to know if anyone has any information pertaining to my question!
    Thanks,
    Suns2006

    If it messed up the formatting, you will not be able to do more with Acrobat. Some third party products supposedly do pretty well, but that conversion may cost you as much as Acrobat.

  • After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages.

    After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages.  I used to be able to select multipule cells in a row (such as company name, address, etc.) then paste and match style on to a pages letter. I found the paste and match style option in the edit menu, however it will only work one cell at a time. Before the update is was working great.

    For diagnosing purpose thy the procedure in a new user account and see if it works there. You create a new user account in the System Preferences > Accounts. If it works in the new account it is probably a corrupt plist file that needs to be deleted.

  • Select multiple Products at a time

    Hi,
    While creating a new Sales Order in CRM, when you press F4 on Product ID field, we get multiple products on search help screen. we can select only one at a time.  But requirement is to select multiple Products at a time and they need to be copied to the sales order at item level. How to acheive this?

    Hi ,
      After enhancing the view update the below piece of code.There it will be selmode_single u change that value for multiple selection.
    typed_context->Your context Node->set_selection_mode( iv_selection_mode = cl_bsp_wd_context_node_tv=>selmode_multiedit ).
    Rg,
    gobi

  • In imovie can you trim multiple clips at a time?  Also, can you randomly sort the photos?

    In imovie can you trim multiple clips at a time?  Also, can you randomly sort the photos?

    Can I do all at once or 1 at a time? It seems to only allow 1 at a time.
    No. But you can do one, copy its settings, then seclect the rest and "Paste Audio Settings" to all of them all at once in a project.

  • Extening multiple clips at a time relatively?

    Is it possible to extend multiple clips at a time relatively?

    Not exactly sure what you mean here. You can change the duration of multiple clips by an absolute value, e.g., add 5 seconds to a bunch of selected clips, by typing Ctrl-D and then +5. or +500 followed by enter. This will trim the clips to an additional duration, if there is enough media (this is not changing the speed of the clips).
    Do you mean changing the duration by a percentage?
    Or maybe change the speed of several clips concurrently? If you want to retime several clips - for instance, have them all play slower, say at 50% speed - then I believe the easiest way is to apply the retiming to one of the clips, and then do Paste Attributes on the other clips.
    Say you want clips A, B, C, D to all play at 50%. Do  the retiming on clip A.Cmd-C to copy. Select B, C, and D, Cmd-Shift-V to Paste Attributes. Check the Retiming box and press enter.

Maybe you are looking for