Copy standard report

hi all,
I have copied the standard program GP49GVYDGHSFRBGM9CYT2E1I1S2 (assigned to the transaction code S_ALR_87012168) to the custom program ZFI*****, Could you please let me know how to configure the custom program to the node FBRD01RFRRD20 0SAPDUEAN-01 report type RE, with the new Extended Program Name so that I can use the same (i.e. the node report type and Extended program name) to assign it to new Transaction code (to have the same functionality as the standard transaction S_ALR_87012168).
Please do comment and thanks a lot.

Hi anuar,
Once you have copied the Standard report to ZFIxxxxx then proceed as follows:
1. Go to SE93 and input the Z TCode name and click on Create
2. Provide the Description and selelct the radio button Transaction with parameters (parameter transaction) and Press Enter
3. Under Default Values for there is an input field Transaction. Input START_REPORT
4. In the bottom of the screen you can see two columns Name of screen field and Value
5. Input the following with out any change
*Name of screen field*                         *Value*
D_SREPOVARI-REPORTTYPE             RE
D_SREPOVARI-REPORT                    ZFIxxxxxx "(Your custom report which you copied from standard)
D_SREPOVARI-EXTDREPORT            FBRD01RFRRD20                       0SAPDUEAN-01
6. You'll be presented with another selection screen. Here simply press Enter
Here you go with the same functionality as that of the S_ALR_87012168. Hope these steps resolves your problem. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Similar Messages

Copying standard report transaction selection screen

Hi everybody,
How can we copy standard report transaction's VI05 selection screen to my custom report transaction's selection screen some zprogram . The problem is that when i am copying the selection screen into my programs screen, it is getting copied, but not as selection screen rather as normal screen. I have defined a transaction code for the same with the custom screen no as the selection screen but its giving a message that selection screen 9001 doesn't exist. However if i keep the selection screen as 1000 the screen in the standard transaction VI05 the transaction is executing fine.
But again the problem was that although it seems that the screen 1000 of the standard program for VI05 has been copied to my custom program but its not showing in the object list of my custom program. so I cannot do any changes which i require.
If anybody requires any clarification u can raise your doubts i will try to make it more clear.
Can any body help me with this?
Your help will be deeply appreciated.
Thanks a lot!
Best Wishes!
Regards
Prem

Hi Prem,
Even if the GUI Status is active, you cannot see two components of Standard Selection Screen.
1. All Selections - Push Button
2. Categories - Screen Block in the first with two options
2.1. OI_STAND
2.2. OI_BULK
This is becoz, there are enhancement spots included in the Standard program and the enhancement spots will not be copied, unless you copy them manually.
Check the same.
Regards,
-Syed.

Copying Standard Reports including enhancements

Dear All,
Im tried to copy standard report mb5b but enhancements in that is not getting copied.
Please guide me.

Hi Dilip,
Which enhancements are you talking about ?
I dont see any enhancement in program RM07MLBD.
Best regards,
Prashant

Copied standard report shows error.

i just copied the standard report RM07DOCS TO YRM07DOCS
AND EXECUTED.
IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
and if i execute without giving any layout , it shows only few fields of output
PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
Edited by: Dastagiri on Dec 7, 2011 4:30 AM

Dastagiri wrote:
i just copied the standard report RM07DOCS TO YRM07DOCS
> AND EXECUTED.
> IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
> and if i execute without giving any layout , it shows only few fields of output
>
> PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
>
> Edited by: Dastagiri on Dec 7, 2011 4:30 AM
Hi,
How did you copy your report? Check if there are includes in program RM07DOCS and it is copied in you Z report.
Also, check if your selection is made thru Screen-painter?
Reetesh
Edited by: Reetesh on Dec 7, 2011 5:40 AM

Including Vendor Name in Standard report 'MB51' transaction

Hi Friends,
I have a requirement of Displaying the Vendor Name in the standard report 'MB51', after the vendor No.
I checked the report and it is really confusing ..... ( i ve seen something like when i double click the document number it is going to 'Display material Document - 147404608' something !! ........
I want the same report with vendor name included ... is that possible ????
One more doubt .... i actually copied the Program 'RM07DOCS' with the includes to a name 'ZRM07DOCS' but when i execute with plant '0020' iam getting an error 'Selection was not restricted' though iam not getting the error when i give the same selection criteria in the Standard report....
Expecting ur replies :-|
Thanks in advance
Cheers,
R.Kripa.

Hi,
I did similar requirement but in my case the tr code was mb5b but anyway approach would be same ,please check steps below.
1) Copy standard report to a Zreport. copy everything including includes , texts etc.
2) Now put a break point at REUSE_ALV_LIST_DISPLAY , it might be possible that its used multiple times. so just cross check which list display is showing results.comment out this REUSE_ALV_LIST_DISPLAY.
3) Now say you have to add 2 extra fields to report.define you own internal table with all the fields you needed.move the final internal table to your internal table.
4) build your own field catalog for your internal table.
4) using select queries fetch field values of those 2 extra fields for each record.and then use resue_alv_list_display or resue_alv_grid_display in place of original list_display. pass fieldcatalog and your final internal table to it so as to get output desired.

Copy and add standard report

I have a request to add few column in the standard report (T-code F.19, program, RFWERE00), so i copy the program and proceed modification, when i check the code, it has error. I would like to know can I have any solution to add column into the report. Thanks!

hi
make changes in ur list_item table then u wll get the required output in ur tcod
hey the ouptput is comging for me
with Regards
Rohan Shetty
Edited by: Rohan Shetty on May 7, 2008 6:41 AM

How to copy standard SAP report to a Z report?

Hi All,
Guys, I have a requirement to copy an standard SAP report and make some changes to it. Please let me know how to copy a standard SAP report as a Z report. Is there any simple way or will I have to open the source code and copy it into the new Z program? If that is the case, how will I copy the screens and related PBO/PAI events?
Please provide me a step-by-step solution.
Thanks & Regards,
Madhur

Hello Madhur,
As Raja had said, yuo could just copy the program from SE38. But just remember a few points:
1. If the standard report is being used in some other programs, then there's no way you can make your Z-report get used in all such instances. I suspect that you may not want to do that anyways, but just in case.
2. Just also check out if the standard report you're talking about has any INCLUDE programs within it. If there are too many standard INCLUDEs in the main report, then you might have to decide whether you need to copy all of them too, or let them be as they are.
3. You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
I have experienced some problems with respect to the second and third points in the past, so it is worth it to be a bit careful.
Regards,
Anand Mandalika.
Regards,
Anand Mandalika.

Copying user specific layout of standard report to some user ids.

Hi ,
I am using user specific layout of standard report in my customizing report for retrieving data from standard report.
i want to copy this user specific layout of standard report to some end user user ids.
if any body successfully solved this isseue previously, please help me to sort out this .
Thanks & regards,
Hari priya

hi sadaram,
Thanks for ur quick reply,
I am using this user specific layout in my zreport for retrieving data from std report. i don't want this layout to be global for all users. i already created same layout in production also , but i want to copy this user specific layout to some of end users
( not all end users) with different user names.
please suggest any solution to solve this issue..
regards,
Hari priya

Standard report for client copy

Hi All,
is there any standard report exist to copy all the infotype data from production client to development client for a perticuler employee?here we r facing the situation that dev client is not updated as production so the errors which we gets in the production to solve them we have to create the same data in development manually and it is very time consumming.so if anybody knows then please tell me .or is there any other way to do the same?
Thank u.
Raj.

Though above solution will work, it will need lot of efforts and more than that extraordinary knowledge of SAP tables. For each problem scenario, the Infotype & Spro tables will vary drastically.
To send a dev request / transport request and to tell the abaper what needs to be moved can be huge task. Thats where a tool helps

How to add new fields to standard reports

hi friends,
im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
?when we check the standard rewport codes...there are lot of include statements perform statements etc ...how to find out the final structure or internal table which has the output values..???

hi
it would be better if u giv full name of the report
if ur displaying the data in alv then search for the
word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
then check the data that is comming into
try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
if ur displaying the data using write statement
then create a zprogram and add a write statement
fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
shiva

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

Standard report for solve inconsistencies with user SAP.

Dear Experts.
We have a problem with a user(ZEST) that in the portal when I open a service(application) display a blue Window of Internet Explorer without display information.
We have copied this user((ZEST) TO (ZEST2 )with the same roles , however this user new work fine.
My question is:
There are a standard report for solve inconsistencies?
We have deleted the user and have created it of new, however this not work.

Run the t-code SA38
Specify the name POWL_D01
In selection screen specify the user id in USER field of which your facing issue
Click on Execute
Run the T-code SA38
Specify the name POWL_WLOAD
In selection screen specify the user id in User input field of which your facing issue
Click on Execute
Now you check it issue will solve.

How do find standard report for

Please help me my client asked me to look for standard report but am lost am new cleint's easy access dont not have these so how do i find these reports
AR Deposit Report
Costs charged to Warranty orders
Costs Of Goods Sold Report (by Market Business)
Units shipped not Delivered
Units shipped not Invoiced

The kind of report in my mind.
- What is my last month or last year activity ?
- What was past tennis schedules ?
Did I go to tennis regularly ?
etc
You could use a text editor and manipulate a copy of the > ics file, or you could use Apple script to extract and
process the historical events.
The ics files looks too complicated.
I don't know, Apple script.
Looking for, if there any report option in the iCal.

Single line in standard report

HI all,
It would seem that with all the functionality of APEX, that the world just wants to copy the look of Excel :/
How to wrap/nowrap the column value in an interactive report??
The above post was great to come across and I can now make Interactive reports with a single (non text wrapped) line of text, making it easier to read if your're happy to scroll across the page forever.
I've been asked to get the same functionality in a standard (non-interactive) report and have failed to achieve it. I've looked at the posts and proposed solutions here involving various uses of nowrap and white-space in the page and/or template.
I'm just after a single line of text per record in a standard report, no matter how wide the report gets. Is anyone able to help me out with this?
NT

It will be a lot easier to help if you provide the following information:
APEX version
Theme
Region template
Report template
Browsers/versions used
An example on apex.oracle.com is even more helpful.

Standard report with fixed position.

Hello,
I have a page where i want the first report to have a fixed position.
I have 3 regions with reports, the first will only display product name and number, the next report will display sales. The last report is very long so I have to scroll quite a bit. That's why i want the first report with names to have a fixed position so i can see which product i'm looking at.
I have tried to make a copy of the standard report template, and in the before rows i have this code
<table class="t3standard" summary="Report" style="position:fixed;">
this didn't work
Is this a way of making changes to the report template? Is it possible to make theese kind of changes in the report template or du I have to go inside the CSS file to add position:fixed somewhere?
Anders

What browser(s) are you using? Win IE doesn't support fixed positioning :-(
How about setting a fixed height for the last report and making it scrollable using overflow: scroll? This would make the first 2 reports "fixed" by default...

Copy standard report

Similar Messages

Maybe you are looking for