Copy whole sequence and subsequence.

In my main sequence there is a sequence in a Select Case structure that has one step, a call to a sequence which has several subsequences. I want to copy the whole case including all the subsequences and subsubsequences. By copying Case, step and end and then pasting am I copying the whole enchilada or just the cheese topping? Maybe there is a standard idiom for doing this.
thanks,
jvh
Solved!
Go to Solution.

If the two are almost identical, why don't you just use one and have different parameters that you pass?
Dennis, that was my goal. However the original was written by one who was an old hand at LV and he uses TS sparingly. The original has the same subsequences repeated for each frequency in a band. An expression is used to set the freq at the beginning of each repeated group. So the whole suite could could be shortened and a set of frequencies passed in for each band (group). I have been using LabView part time for a couple of months and I am learning TS on the fly. I proposed shortening the sequences and passing in parameters from an .ini file or perhaps using Property Loader. There are 4 modules involved. I offered two schedule alternatives and as I am learning on the fly I estimated that doing it the right way would take me 5 days and the quick way would take 2. (Less in reality but I have several other projects ongoing at the same time.) The RF engineers said we need it now so management said do it the quick way first. Either way it is a learning experience.
That's probably much more information than you wanted. I guess I could say "that's the long and short of it".
Looking forward to doing it the right way, quick way will be done in a couple of hours.
jvh

Similar Messages

I have an existing Ibook that I created. I wanted to copy the whole book and rename it. Then modify several pages. Is that possible?

I have an existing Ibook that I created. I wanted to copy the whole book and rename it. Then modify several pages. Is that possible?

Sure. Right click on the book in the left hand pane and choose 'Duplicate'. Then work on the duplicate.

I cannot copy whole text anymore. It will highlight just one paragraph, and if I go for the whole text, it goes blank. I have the 10.6.8 version.

I cannot copy whole text anymore. It will highlight just one paragraph, and if I go for the whole text, it goes blank. I have the 10.6.8 version.

Hello Banjo62
Try testing that issue out within a new user on your Mac. If it does the same thing, then you will need to reinstall Mac OS X 10.6 Snow Leopard.
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G.

How to move a sequence, and only the media in the sequence?

I need to move a 30 min. sequence, and associated media, to work on a different, remote editing system.
I'd like to just get the media in the sequence with maybe 5 sec. handles. Every test I've run through Media Manager has copied each, complete, original media clip (not just the portion used) - many of which are over 20 minutes long - despite having only used a small portion of each clip. (So in the media manager Summary section the bar graph of "original" amount of space used, is always the same as the "modified"). In the past I think this was called "Bounce"...
2. If I accomplish this, can I email the sequence data only, and have it link up in the original editing system, or will the media file names be so unique that the original system won't recognize them and link up.
Thanks in advance for the help.

Hi -
Question 1: The obvious first question is - did you select Delete unused media from selected items?
!http://www.spotsbeforeyoureyes.com/MediaManagerDeleteUnused.jpg!
If you did, does your media have a Reel Name associated with it?
2) You can email the project sequence information (you will want to zip it first before sending), Then you can relink to the media as long as the media has the same names. If will be a matter of re-directing the sequence to the new directory location of the media - which you will do through the Reconnect dialog box.
But you might want to just buy an external hard disk drive, copy the media and project there and FedEx the whole thing to your collaborator.
MTD

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How to use progress bar for Main and Subsequences in teststand

HI,
I have one main sequence in that I am calling different subsequences (Containing many steps and for loop).
I am trying to use progress bar for this sequence, but my requirement is progressbar is able to show the progress of all the steps containing in Main and subsequences.
I have developed sequence in that I am able to show the progress for only Main sequence steps not for subsequences steps.
Is it possible? If yes please let me know the suggestions.
Thank You

Hi Santosh
Here you are
Greetings
Juergen
never Double Click on Submit
Message Edited by j_dodek on 08-05-2008 08:05 AM
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
Progress_ts351.seq ‏52 KB

How to paste style on whole table and not one cell at a time?

Hi,
I am copying a style and then trying to paste it on a whole table, but it will only allow me to paste the style on each cell separately, and it takes a long time.
Is there a way to paste a style on the whole table?
Thanks,
Shani

Hi Peter,
I am creating shipping labels.
My table is divided like the paper labels in my printer.
I am copying each address directly from my browser (each address on one cell). After I copy all the addresses, I adjust one them to: avenir font 9.5 pt, indents 0.5 first etc, and then I paste this style on each cell separately.
Is there a way to paste the style all together in one time? (I am making shipping labels every day so it is not a one time thing).
Thanks!
Shani

Premiere crashes every time I try to copy a Sequence that contains a nested sequence

I'm working a project that has a lot of multicam sequences in it and I'm having a problem with Premiere crashing. I want to be able to iterate my sequences for versioning as I go through and make changes requested by my client for final approval but don't want to get rid of the old versions in case I need to go back for something later. I use the as a general practice because I've learned the hard way that it's much easier to save everything and need it rather than start making changes that I might want to get back later
Most of the items don't have any issues; footage, gfx .movs, stills, etc. all copy and paste fine as do my 'source' sequences which have 3 video tracks (cam 1, cam 2, and a gfx track). I am then dragging those sequences into a new sequence and 'Enabling Multicam' on that clip so I can use the multicam function of the Program monitor (a great feature I might add). However, I am now going back and making changes and want to create new iterations of my 'Multicam Sequences' and when I go to Copy them Premiere crashes. I also tried right-clicking and selecting 'Duplicate' but this also causes a crash. Does anyone have any suggestions as to why this is happening? I think I'll need go ahead and submit a bug report because I really can't think of why this should be the case.
The only workaround I have thought of is to create new sequences and drag the contents of each of my old timelines into new, revisable sequences while still retaining my old originals.
I'm on a PC with Windows 7 Professional and have all the updates for the newest version of Premiere CC

Sounds similar to what's happening to me. I'm on a Mac with Premiere CC.
When I try and duplicate audio tracks, crashes almost every time.

Backing up - how to solve after copying whole system - login incorrect

Hello,
I have done an script to backup the whole filesystem and restore it. I am making tests before using forever.
For Windows I use ntfsclone and it works perfect, but for ArchLinux I am doing:
I use Knoppix cd-live to manage everything. I load the script from /dev/sda4 (data partition in ntfs) and the main commands to backup and restore are:
Without doing chroot (because it is not possible)
sudo mount /dev/sda5 /media/sda5 #This is the / of ArchLinux
sudo rsync -aAXv /media/sda5/* /media/sda4/seccopy/ --exclude={/media/sda5/dev/*,/media/sda5/proc/*,/media/sda5/tmp/*,/media/sda5/run/*,/media/sda5/mnt/*,/media/sda5/media/*,/media/sda5/lost+found,/media/sda5/home/*,/media/sda5/var/lib/pacman/sync/*}
cd /media/sda4/seccopy/
sudo tar -zcvf /media/sda4/arch_copy.tar.gz ./*
To restore:
sudo mount /dev/sda5 /media/sda5
sudo rm -r /media/sda5/*
sudo tar -zxvf /media/sda4/arch_copy.tar.gz -C /media/sda5
I can check that the files are copied correctly.
I can do (and really do) the same with the home partition, same process but changing sda5 by sda6, and instead of arch_copy.tar.gz, arch_home_copy.tar.gz
When I restart to boot in the new copied system... the problem:
I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
I type it, enter, wait some seconds and prompt me again.
I try with the root user, and its password, and the same problem. Not access to the system.
I try in tty1, and the same problem, it says:
Login incorrect
First question: How to solve this situation?
I think maybe the problem is something about /etc/passwd or /etc/shadow, and also I try to make chroot to see if it works.
If I try to do chroot from Knoppix to the ArchLinux restored, it is not possible, everything goes ok from this wiki:
https://wiki.archlinux.org/index.php/Change_Root
but fails in this:
Note: If you see the error chroot: cannot run command '/bin/bash': Exec format error, it is likely that the two architectures do not match.
I don't know what is "architectures". I installed x86_64 in ArchLinux.
Second question: Is because the Knoppix 7.0.4 (debian based) uses other? Like i686?
I see in Internet this:
http://www.cyberciti.biz/tips/recoverin … -file.html
It is not my problem, but maybe it is a way to know if is correct or not,...-
mode "recovery", edit, add to linux line after "ro single": init=/bin/bash
Ctrl+x
Logged as root automatically:
Third question: Why is not prompted the password? And illegitimate user can see everything doing this.
$ mount -rw -o remount /
$ mount -rw -o remount /home
mount: /home not mounted or bad option
In some cases useful info is found in syslog -try
dmesg | tail or so
Fourth question: Why i cannot mount the home? It is in the /dev/sda6, but for the / it didn't say anything to me. I cannot see the /home directory.
$ cat /etc/passwd
#- Has the root user and the ussr1 user
$ cat /etc/shadow
#- Has the root and ussr1 password coded.
$ passwd
Enter new UNIX password:
Retype new UNIX password:
Fifth question: Why is not prompted for the before password? (following the steps i can imagine that this doesn't work, so, is not a security problem)
$ passwd ussr1
Enter new UNIX password:
Retype new UNIX password:
$ sudo reboot:
sudo: /usr/lib/sudoers.so must be only be writable by owner
sudo: fatal error, unable to laod plugins
$ reboot
Failed to talk to init daemon.
$ exit
exit
[ 377.105707] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 377.105707]
Sixth question: Why I cannot exit correctly? It also happen if I use the Arch in Live mode (and try to exit).
The only way to avoid this problem is unpluging from electrical power (not even with the power button).
I start the system again, I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
I type it, enter, wait some seconds and prompt me again.
The same as first question: How to solve this situation?
My idea is only use Knoppix live-cd to use as backup/restore system, but if it is not possible, I would like to know how to solve.
The idea of using rsync instead of dd is because I want to save only the data, and not all the sectors (not enough space in the hard disk).
I don't mind to have to use arch linux usb installation media as it is "knoppix live-cd", the only thing I would like to use is the same media to do all the operations, because I want to teach normal users how to do it by themselves.

cfr wrote:What's the exit value when you run passwd? (man passwd will show what the exit values mean.)
value 0 -> success
cfr wrote:Have you tried changing the password to something *other* than the existing password?
tried for example with "something" for both, "root" and "ussr1"
but if I go to /etc/shadow, I see that the passwords coded for root and ussr1 are not the same, so must be coded with other things too.
cfr wrote:Have you tried creating a new user and logging in as that user?
I added another user, for example "try"
useradd -m -g users -s /bin/bash try
passwd try & echo "$?"
.. (something)
0
Ok, after just add the user, if I go to /home/ I can see some files created automatically, and if I compare those files with the files that I pasted in my ussr1 account, there are two that are missed:
.xinitrc
.xsession
xinitrc is executed by startx (so, it is because the X11..)
and..ok, xsession the same (xdm/gdm/kdm). So nothing here.
I also add "try" to the groups: lp, games, video, audio, optical, storage, scanner with:
gpasswd -a try lp
cfr wrote:Have you run pwck and grpck to check the integrity of the files? (I doubt this is the issue but it seems an easy step to do just on the off chance.)
Ok, if I do:
$ pwck; echo "$?"
0
$ pwck /etc/passwd; echo "$?"
0
$ pwck /etc/shadow; echo "$?"
invalid password file entry
delete line 'root:ahskldfhajksdfkahsjkdhf...asdkfhjashdkfjh:15795::::::'?
invalid password file entry
delete line 'bin:x:14871::::::'?
so forth..with: root, bin, daemon, mail, ftp, http, uuidd, dbus and nobody
user 'ussr1': directory '7' does not exist
user 'polkitd': directory '7' does not exist
user 'usbmux': directory '7' does not exist
user 'mysql': directory '7' does not exist
invalid password file entry
delete line 'kdm:!:15793::::::'?
invalid password file entry
delete line 'avahi:!:15793::::::'?
user 'try': directory '7' does not exist
pwck: no changes
2
$grpck /etc/group; echo "$?"
0
$grpck /etc/gshadow; echo "$?"
invalid group file entry
delete line 'root:::root'?
invalid group file entry
delete line 'root:::root'?
invalid group file entry
delete line 'root:::root'?
...so forth
with: root, bin, daemon, sys, adm, tty, disk, lp, mem, kmem, wheel, ftp, mail, uucp, log, utmp, locate, rfkill, smmsp, http, games, lock, uuidd, dbus, network, video, audio, optical, floppy, storage, scanner, power, nobody, users, systemd-journal, polkitd, usbmux, mysql, kdm, avahi
grpck: no changes
2
So, cat /etc/gshadow | wc -l = 40 lines
And grpck /etc/gshadow | wc -l = 40 lines
And the same for /etc/shadow = 16 lines and the pwck were 11 "delete line" and 5 "directory '7' does not exist"
But as we see, even the try has some error... in this case with directory '7'.
I don't understand why errors... theoretically they were copied and pasted without modifications
NOTE** Ok, my fault, I have to execute the command like this: $ pwck -r /etc/passwd /etc/shadow; echo "$?" and now it answers: 0 So, the integrity of both files are correct! And the same with group and gshadow
ewaller wrote:
Inside the chroot, run pacman -Qk | grep -v ", 0 missing"
And see if there are any packages that should be reinstalled.
If not, reinstall pam, just for good measure
With
$pacman -Qk | grep -v ", 0 missing"
no results.
I execute it without doing anything before with pacman, no updating, absolutely nothing.
pam?
i search for pam, and i find "pam mount", something like "encrypted home". But Was it activated by default?
Last edited by Zzipo (2013-03-31 21:57:57)

I have bought the whole CC and it says my trial has expired. But when i go to license the software, it asks for a serial number and i dont have one. Please help.

I have bought the whole CC and it says my trial has expired. But when i go to license the software, it asks for a serial number and i dont have one. Please help.

Sign out from Creative Cloud and sign in again using email ID using which you had purcahsed subscription:
https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Then launch CC apps which is asking for serial number and check.
Still asks for serial number check the hosts file for Adobe entries , if present remove it and try to activate.
1) Right click on the Finder icon on dock and select "Go-To Folder" option.
2) You will get a text box, type-in below mentioned command and then hit 'Return' key.
/etc
3) It will open the etc folder, please look for file named "hosts" and copy the same to Desktop screen.it
4)Double click on Hosts file , it will open it with TextEdit, If present Delete Adobe entries present inside Hosts file like 127.0.0.1 activate.adobe.com.......etc
5)Copy and paste the Hosts file back to "Etc" folder.
When asked Authenticate with your Mac password.
Make sure to select "Replace" option when prompted.
Then launch CC apps which is asking for serial number and check.

Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
Thanks in advance!!!

Hi Miro,
I was just experiencing a similar problem today. In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences. I think this is what was creating the problem.
The trim unused media box (or whatever the check box says) was greyed out.
My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines. I unchecked the "rename media" option, not sure if that was necessary part of the solution.
This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
Hope that helps!
I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
Gerry

Copying a page and sending it in an email

I am trying to copy a whole page and then send it in an email. When I do this the pictures are just a bunch of letters. I tryed to download and save and it does the same thing. I think I need to save as RTF but I dont know how to do so..
Please help

To copy a page from Safari and send it from OS X 10.4.2 I just hit "Command-I" and the page comes up in Mail ready to address and send.

IDCS6 - How do I create tables with large whole numbers and small fractions?

I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever and give me a roaring headache.
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
On a Mac, OSX 10.8.5.
Thanks,
Lou

There are a number of ways to do it, but I make fractions using Dan Rodney's excellent (and free) Proper Fraction script. After it's installed; assign it a keyboard shortcut. Then type your numerator/denominator, select it, and invoke the script. With just a couple keystrokes, you've got a perfectly formatted fraction.
As for the PDF tables, I'd try exporting the host file to RTF and copy/pasting from there. In case you're unaware, to paste values into InDesign table cells, the number of (pre-existing), cells/rows/columns in InDesign must match those copied (from) exactly, and must be pre-selected when the Paste command is executed. So...
1. Set up empty destination table in InDesign which matches the source structure.
2. Select source cells and Copy.
3. In Indesign, select exact same (x, y, qty), range of destination cells and Paste.

Export tables, sequence, and package question

Hi all,
I've export table like: exp username/password file=export.dmp log=export.log tables=A statistics=none.
The export statement above just export only the table "A" structure not the table "A" data. So, how can I move all the data from table "A" to table "B".
How do I export the sequence, and package and its data also?
Thank you very much
Kevin

Can you create a DBlink in order to do the insert into B select * from A.
Also, you can use the SQL*Plus Copy command.
Here are some links for COPY command:
 Copying Data
 copy command
 copy command vs sql*loader
 
Here is a link for moving code:
 exporting packages,function etc. from one user to another.

Copy whole sequence and subsequence.

Similar Messages

Maybe you are looking for