Copying SharePoint Page between SharePoint Sites with the MasterPage and Correct PageLayout

Hi All,
I have created a page in the following SharePoint Site Using a Custom SharePoint MasterPage and a Custom PageLayout.
https://devrussellportal.prod.ds.russell.com/sites/emeasandbox/Data-Governance/Pages/DataGovernanceHome.aspx
In this site I have a Page called 'DataGovernanceHome.aspx' in that site. I need to copy this page with the MasterPage and the PageLayout that I have used to build this Site Page to https://russellportal.prod.ds.russell.com/sites/datagovernance/ Site.
I was able to copy the MasterPage with all styles and images without any errors and applied successfully to the new site. I exported the desired page from the old SharePoint Site and imported to the new SharePoint Site via SPD. But when I tried to open the
page it gave me an error 'Sorry, something went wrong'.
I even edit the
<mso:PublishingPageLayout msdt:dt="string">https://russellportal.prod.ds.russell.com/sites/datagovernance/_catalogs/Russell SharePoint 3 Column.aspx, Russell SharePoint 3 Column </mso:PublishingPageLayout>
tag by updating the new SharePoint Site URL also. But did not solve the matter. So what is I am missing in here? Could someone help me to solve this matter?
Thanks and regards,
Chiranthaka

Hi,
Having moved the Master Page, Page Layout and other supporting branding assets successfully is a great first step.
So now you are attempting to move the content page. The content page itself is really a list item in the pages library. The aspects of a given content page are simply stored in site columns. When you copy the content page from one library to another using
SPD, I do not believe everything will transfer.
What you could try next is to open your source site in SPD. Navigate to the pages library and then detach your specific content page from its page layout (right click the content page to see this option). Now open this page in SPD to see all content.
Do the same thing in your destination site. First create a new content page in your destination site, then open SPD. Detach this content page from its page layout and now copy and paste the contents from source to destination. Save and see if the destination
content page loads. If it does, try reattaching the page layout on the destination site. As you noticed before, you may need to change a mso property to the new page layout location.
Another hiccup could be the specific web parts you added to the content page, but I can't say for sure. Possibly a webpart is attempting to access data it does not have access to?
All else fails, can you simply recreate the content page on the destination site from scratch, then copy content and add web parts in to effectively recreate the page by hand?
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Similar Messages

Copying SharePoint Site Page between SharePoint Sites with the MasterPage and Correct PageLayout

Hi All,
I have created a page in the following SharePoint Site Using a Custom SharePoint MasterPage and a Custom PageLayout.
https://devrussellportal.prod.ds.russell.com/sites/emeasandbox/Data-Governance/Pages/DataGovernanceHome.aspx
In this site I have a Page called 'DataGovernanceHome.aspx' in that site. I need to copy this page with the MasterPage and the PageLayout that I have used to build this Site Page to https://russellportal.prod.ds.russell.com/sites/datagovernance/ Site.
The old site is a sub site but the new site is not s sub site. But both them are Publishing Sites.
I was able to copy the MasterPage with all styles and images without any errors and applied successfully to the new site. I exported the desired page from the old SharePoint Site and imported to the new SharePoint Site via SPD. But when I tried to open the
page it gave me an error 'Sorry, something went wrong'.
I even edit the
<mso:PublishingPageLayout msdt:dt="string">https://russellportal.prod.ds.russell.com/sites/datagovernance/_catalogs/Russell SharePoint 3 Column.aspx, Russell SharePoint 3 Column </mso:PublishingPageLayout>
tag by updating the new SharePoint Site URL also. But did not solve the matter. So what is I am missing in here? Could someone help me to solve this matter?
Thanks and regards,
Chiranthaka

Hello,
In your "something went wrong screen" you should see a correlation ID
please run you SharePoint management Shell with this command
get-splogevent | ?{$_Correlation -eq "<GUID>" }| select Area, Category, Level, EventID, Message | Format-List
Replacing the <GUID> by the correlation ID and give us the result
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

HTTPS SharePoint site with HTTPS Provider hosted app - The remote certificate is invalid according to the validation procedure

We have SharePoint 2013 site configured with SSL and we have developed a provider hosted app which interacts with SharePoint list.
If we try accessing the Provider hosted app from the SharePoint site with HTTP [http://mysharepointsite.com/] there are no any errors thrown.
But whenever the same Provider hosted app is tried accessing from the same SharePoint site using https address
[https://mysharepointsite.com/] we are getting below error:
The remote certificate is invalid according to the validation procedure.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[AuthenticationException: The remote certificate is invalid according to the validation procedure.]
System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) +2983172
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) +8530566
System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) +230
System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +645
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +9
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) +87
System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) +1467
System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) +84
System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) +22
System.Net.ConnectStream.WriteHeaders(Boolean async) +761
[WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.]
System.Net.HttpWebRequest.GetResponse() +8534156
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
ProviderHostedHTTPSWeb.Default.Page_Load(Object sender, EventArgs e) +348
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
We have already added the certificate used for the SharePoint site and the provider hosted app in the SharePoint central admin trusts.
Any idea's how can I resolve this issue?

Hi,
According to your post, my understanding is that you failed to access provider host app using https.
The reason for this is that SharePoint implements its own certificate validation policy to override .NET certificate validation.
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
For more information, you can refer to:
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error while Authenticating sharepoint site with Azure AD users using Azure Access Control Namespace

I have a Sharepoint site running on Azure virtual Machine. Now i want to authenticate my sharepoint site with Azure AD users.
For this i have followed below link, but getting error after login.
Using Microsoft Azure Active Directory for SharePoint 2013 authentication
I have implemented as given on reference link, but still facing error. When i access my url from browser, it will ask me through which you want to logon.
Then on selection of ACS Provider, it will redirect me to office365 login. After i submit my credentials, it will redirect me to
https://testvm.cloudapp.net/_trust/
and got error. So i checked in sharepoint log and found below error.
Cannot find site lookup info for request Uri urn:sharepoint:spvms.
SPAudienceValidator: Audience uri 'urn:sharepoint:spvms is not valid for the context.
Getting Error Message for Exception Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The Audience URI could not be validated.
SPSaml11SecurityTokenHandler: Audience validation failed for request 'https://testvm.cloudapp.net/_trust/' with
the following audience URIs: 'urn:sharepoint:spvms', .
Application error when access /_trust/, Error=The Audience URI could not be validated.
at Microsoft.SharePoint.IdentityModel.SPSaml11SecurityTokenHandler.ValidateConditions(SamlConditions conditions, Boolean enforceAudienceRestriction)
at Microsoft.IdentityModel.Tokens.Saml11.Saml11SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenHandlerCollection.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Web.TokenReceiver.AuthenticateToken(SecurityToken token, Boolean ensureBearerToken, String endpointUri)
at Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.SignInWithResponseMessage(HttpRequest request)
at Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.OnAuthenticateRequest(Object sender, EventArgs args)
at Microsoft.SharePoint.IdentityModel.SPFederationAuthenticationModule.OnAuthenticateRequest(Object sender, EventArgs eventArgs)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

I want 100,000 external users to have access to my SharePoint online Site collection.
I was thinking of going the Azure AD route, where external users will have there ID's created in Azure AD cloud.
Trying to figure how I can integrate Azure AD cloud with my SharePoint Online Site collection.
Currently my site collection is tied to On-premise AD.
Is there a way to integrate the SharePoint online to use both Azure AD and On-premise AD?
Thanks
Nate
Any Answer here?

Is there a way I can add be background image to my sharepoint site with look and feel?

Whenever i add any background image with "look and feel" it stretches the image. I've tried modifying the CSS file (in body and tried .ms-backgroundImage setting "background-size:inherit !important;") to fix it, but it doesn't seem to
have any effect. I there anyway i can add a background image to the master html or css code and get it to not stretch?
Thanks
James T.F

Hi,
According to your post, my understanding is that you wanted to add background image to sharepoint site with look and feel.
We can define the Image Url in the Composed looks (Site Settings > Web Designer Galleries > Composed looks) to add background.
However, the image will be stretched to fill the viewport at 100%.
Though we can override the CSS attributes which would allow the image to repeat, but instead I recommend to go the no CSS route and switched the background to a much larger one that would fill the viewport nicely without looking pixelated.
More information:
SharePoint 2013 Branding: A New Approach
SharePoint 2013's Branding – My first three lessons
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Changing the Site URL of a Sharepoint site changes the content type order

Description
Changing the Site URL of a Sharepoint site changes the content type order of all lists that
* contain folder content types
* and have a custom content type order
* where a folder content type is the first content type in order.
Reproducible behaviour
1. Create a Team Site in Sharepoint
2. Create a Task List "Test" on the Team Site
3. Go to List Settings
4. The Content Type order is by default
    a. Task
    b. Summary Task
5. Change the Content Type Order to
    a. Summary Task
    b. Task
6. Go To Site Settings "Title, description and icon"
7. Change the Site Url
8. Go To List "Test" List Settings
9. The Content Type order now is
    a. Task
    b. Summary Task
10. Select "Change New button order and default content type"
11. Here, the Content Type order still is
    a. Summary Task
    b. Task
Is this a bug? Has anyone noticed this behaviour before?
Kind Regards,
Joachim

Hi Joachim,
You are not missing something or doing something wrong. i Hope :). This behavior is reproductible.
The granularity of change is better by Powershell. But by the interface is most user-friendly.
Maybe that's the reason of this behavior.
Gilles Martinez
Twitter
Blog
Please mark as helpful/answer if this resolved your post

Created a one page index.php site with dynamic driven menu but have to click thrice before it popula

Created a one page index.php site with dynamic driven menu but have to click thrice before it populates the content menu
it has no problem getting the menu information but seems to forget that the content needs to load on first go ie for the Home page
anyone with any help would be great

Hey J.S,
Do you think its a bad idea to have Database admin over them web? How could i make my db admin into a program to run on a certain computer. i.e on the car breaker yard where there is no dreamweaver.
Thanks J.S

I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Is there a problem with the itunes and quick time download pages or is it my internet.

Is there a problem with the itunes and quicktime download pages or is it just my internet.

Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

How do i save a calender i have created with the photo and the dates saved on separate pages?

how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages? when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page. This is causing problems when i print.

Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
I hope this helps!

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Another site already exists at . Delete this site before attempting to create a new site with the same URL

Hi Everyone,
It would be great if you can help me with the below.
Few days ago one of our content db went into suspect mode. Our DB team had resolved the issue. But one of the sites that was created probably around the same time is no more available. When I try to create a site on the same URL, I get the following
error.
Another site already exists at <URL>. Delete this site before attempting to create a new site with the same URL
When I try to delete the site or if I try to view the details of the site using Central Administration, I can find the site, but it doesn't display any details like Title, DB Name etc.
If I use stsad -o enumsites command to list ll the site, for the given site I get the following error:
<nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named <URL>.
I am not even able to delete it using Powershell.
Please suggest.
Thanks,
Uttkarsh

You might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
Amit

Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

Back up all data. Rebuild the mailbox. Try again to delete the message.

When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How can I fix this problem?

When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists." The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same. How can I fix this problem?
Thanks
Candy777

HT2500 Error when deleting email: Apple Support Communities

Copying SharePoint Page between SharePoint Sites with the MasterPage and Correct PageLayout

Similar Messages

Maybe you are looking for