"Core Center does not support your motherboard" MSI P965 Neo Mobo

Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667  3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor  16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate  16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows Updates

Hi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer

Similar Messages

  • K8T Neo - Core Center does not support your motherboard!

    I installed the latest version of Core Center utility on Windows XP x64.  But if I attempt to run it "Core Center does not support your motherboard!" is displayed.  The download website clearly states that Windows XP x64 is supported.  The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86. 
    Any suggestion is appreciated.

    Quote from: Kaz Honjo on 02-September-07, 21:33:39
    I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
    I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
    "I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
    Support list :
       MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
       MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
            MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
       MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
       MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
    OS : Windows 98/Me/2000/XP32/XP64
    Basically should work...
    "I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
    go to "Control", "Automatic Profile" and select the right senzor to be used.

  • DualCoreCenter error - "Dual Core Center does not support!"

    Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
    I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
    During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
    Anyway, I let it do the repair and install itself.
    Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
    Can someone shed light on what that means please.
    Thanks...

    It means:
    I suck, don't use me!
    Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
    Have a look through: here

  • "Dual Core Center does not support" error msg on K9N Platinum

    Hi,
    I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
    Thank you.

    Oh ok.
    Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
    I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that.

  • "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fantastic experience" message with IE 11

    Hi All,
    I have recently migrated from TFS 2010 to TFS 2013. When developers are accessing TFS Web interface from IE 11 they are getting message "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure
    a fantastic experience!" and page is not showing up correctly. I can open Web interface from Chrome without any issues. Also I figured out if I open Developer Tools (F12) in IE Web Interface also works fine and screwed up again
    when I close Developer Tools.
    What can be wrong with IE11 settings?
    Regards,
    Oleg

    Hi Oleg,       
    Thanks for your post.
    You’re using TFS 2013 Update 4 now?
    Please share your IE 11 screenshot within this error message here.
    Have you use the TeamCompanion in your TFS Server? If yes, please refer to the solution in this article:
    http://www.teamcompanion.com/blog/.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What does it mean on a website if you get a message "does not support your browsers navigation buttons?"

    I was doing my taxes on-line and I got a message saying the software package I was using "does not support your browsers navigation buttons?"

    Which browser are you using?  Which os? 

  • Memory not fully working on MSI P965 NEO

    I've build a new computer and everything is working fine exept for the DDR2 memory.
    Specs
    - MSI P965 Neo, bios 7235ims v1.5
    - Memory, 2x 512 Mb PQI, Dual channel DDRII, 533
    - Intel core 2 duo, 6400
    When starting it only reports 256Mb of RAM memory.
    I've tried putting the memory in the different dimms and in all combinations. This makes no difference.
    Any help to get the full 1Gb will be greatly appreciated.
    M

    When I put in just 1 module, doesn't matter which one, and into which socket, the computer runs, but there's no screen. So it doesn't work with just one.
    I upped the voltage to 2.0V and manually put in the timing. No difference at all.
    Also I ran Memtest, and it displayed 255M of memory, and an error using test nr 4. When I did the specific memory tests on test 1 it said 255M, test 2 showed 621M and than freezed with lots of errors, and test 3 freezed immeadiatly.
    So can I conclude the memory is broken or can Memtest not handle this memory.

  • Core Center does not show up!

    HI Guys,
    I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
    MSI 875P NEO-FIS2R with 1.8 bios
    Can anyone help me out? I don't understand

    I found it !!!!
    The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

  • Sorry, the all-new Yahoo! Mail does not support your browser.

    Everytime I log into yahoo mail I get this message before proceeding to the e-mail screen. This has been going on for a long time now--as much as a few years, and I want to finally fix it.

    You have a user agent that is corrupted by a general.useragent.override pref and that identifies you as:
    *Mozilla/5.0 (Windows; U; Windows NT 5.1; ru; ToolKit; rv:1.9.0.8) Gecko/2009032609 Firefox
    See:
    *https://support.mozilla.com/kb/Finding+your+Firefox+version
    *https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    *http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
    You may want to reset all prefs as a lot seem to have been changed.
    *http://kb.mozillazine.org/Resetting_preferences
    *https://support.mozilla.com/kb/Resetting+preferences

  • Ws-management service does not support your request

    Hello,
    i have Exchnage 2010 SP3 with rollup2
    i'm facing the following error right after Exchange SP3 installed:-
    Please advise

    i followup many scenarios :-
    - restarting power-shell application pool as a suggested solution.
    - recreate Power-shell virtual directory.
    - re-install winrm IIS extension feature.
    - re-install Exchange 2010 SP3
    running the below commands :-
    dism /online /enable-feature /featurename:ServerManager-PSH-Cmdlets
    dism /online /enable-feature /featurename:BestPractices-PSH-Cmdlets
    but the result is 
    Error: 0x800f080c
    Feature name ServerManager-PSH-Cmdlets is unknown.
    A Windows feature name was not recognized.
    Use the /Get-Features option to find the name of the feature in the image and try the command again " 

  • New core center version, not working!

    Iv ealier used Core center with success on my old ms-6561 board. Just formated my drive and wanted to download again, but only found this new one and it does not support my board. Where cfan I find older core senter files?

    core center does not display the temps correctly. download a program called speedfan. its better than corecenter      

  • Virtual Sound does not support my Satellite A100-998 with Vista

    Hi.
    I have Satellite A100-998, and yesterday i find for my laptop available new driver. I download Virtual Sound for my laptop and for vista and when i try install driver i have error "Toshiba Virtual Sound does not support your computer." Why
    Ps. Sorry for my bad English, but please help me!

    Hi,
    had you "Virtual Sound" before? If no, then your machine has probably NO "Virtual Sound". But if yes, then check if you downloaded the appropriate driver for your machine, because there are some many variations of the machine you have, and some of these machines have absolutely different hardware.
    Which operating system is on your machine installed?
    Greets

  • Kespensky pure does not support my web- browser.

    Iam running a 64 bit Turlon processor in a hp laptop. The operating system is window 7 ultimate. I have recently installed kaspersky Pure ver 9.1.0.124. internet provider is sybeam.
    Since I finally got rid of internet explore using Firefox nothig seems to work. the computer in noticbly slower. and get mesages like The version of :
    "password manager does not support your web-browser
    Reason: TypeError: components_ByID(KPMAUTIFILL_CID) is undefined.
    Also my trash is no longer functioning, the scan doesn't work, and the other small hangups.
    I don't know how you and Kaspersly interface but I would like to get the system bac & running.
    I appreciate your assistance in the matter,
    Thanks,
    John C Trask

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Can i get MSI P965 Neo (MS-7235) for 1333fsb support by updating bios?

    Hi,
    Im new in this forum hope this is right place to ask this.
    I got motherboard: MSI P965 Neo (MS-7235)
    So it only supports 1066fsb?
    I have e6850 processor, so can i get this motherboard to support that processor by updating bios?
    according to this msi.com
    it says fsb 1333, why?
    cpu-upgrade.com
    this site says 1066....

    Quote from: duudeli111 on 13-September-14, 03:54:54
    according to this msi.com
    it says fsb 1333, why?
    http://www.msi.com/product/mb/P965_Neo.html#hero-specification
    • Supports FSB 1066/800 MHz
    http://ark.intel.com/products/27730/Intel-82P965-Memory-Controller
    Supported FSBs : 1066MHz

  • MSI P965 Neo-F reboot problems

    Hi,
    I have a MSI P965 Neo-F motherboard in my PC, everything works great except for one thing, rebooting.
    When i reboot or reset, it shuts down the operating system/BIOS, after that the PC stays on but my screen stays black.
    Does anyone know a solution?
    Thank you,
    ghostrider090
    full specs:
    Core 2 Duo E6600  (overclocked to 3GHz)
    MSI P965 Neo-F
    2x Kingston Value Ram PC5300 1GB
    Club3D Geforce 7950GT 512MB
    Huntkey 450W  (modded with coolermaster fan)
    Samsung SH-S182D
    2x Western Digital Caviar SE 250GB 8MB

    I dont know solution ...   
    i see the problem in mobo or revision of P965 itself ... there is many problems with restarts, reboots, first boot. It depend on version of BIOS you have, but i not found any version which solve this for me ...
    i using v1.9 now ... and i have problem with boot after hybernation with vista..
    after turning my computer off (in vista is normal to hybernate and shut down) i can boot my computer .. by its very strange. So, power comes up, but then instantly comes Windows Vista with logon screen - NO posting by BIOS, no RAID initial screen, no scaning for hardware... it comes instantly to windows - but windows are in some inconsistent state and i cant login (freeze/BSOD ... but pointer can be moved by mouse and login button shows efect if i move pointer over - so windows are in memory and working) ... in this state is HDD led all time ON (shining) ... i can shut down and boot up again and everything is OK (windows are normaly restored from disk)
    with older v1.5 BIOS ... my computer goes to same state like is described here - BLANK ... and BIOS setting was reseted
    so and here is one similiar problem
    https://forum-en.msi.com/index.php?topic=100524.0
    and one my thread .. its particly about this
    https://forum-en.msi.com/index.php?topic=107722.40

Maybe you are looking for