Correction to Note 382607
The note 382607 alter the function HR_BR_ADD_MONTH_TO_DATE, but the source code now is duplicated. Anybody knows a fix for this note?
Att,
Marcos Ferreira
I have access to SNOTE and I cancel the implementation, but I imagine that the correction in function where I have problem is necessary, but only in a new note.
regards,
Marcos
Similar Messages
-
Inner Join of 3 tables is correct or not?
Hi Guys ,
I have a requirement where i have to join 3 tables i dont know whether the inner Join which i wrote for 3 tables is correct or not.I am not getting any Syntax error but whether the logci below which i wrote gets all the records or not.
The Requirement is
"c. Select the BOL Number entered in the screen and query the table LIKP with the BOL number in the field LIKP-BOLNR. Gather the list of ALL delivery documents (LIKP-VBELN) that is outputted.
d. Query the list of the delivery documents obtained into the table VBFA in the field VBFA- VBELV. From the output that is displayed, select the Follow-On Document Field (VBFA-VBELN) for that item whose Subsequent Document Category (VBFA- VBTYP_N) is R and the Movement Type (VBFA- BWART) is 641. Get the Follow-On document number for each of the above Delivery Document number.
e. Query the table EKBE with the Follow On document obtained above in the field Material Document (EKBE- BELNR). Perform this activity for each of the follow on document obtained above. Get the resultant Purchase Order (EKBE-EBELN) and Item Number (EKBE-EBELP) from the query. After querying will all the Follow-On Documents, get the unique list of PO number and Item Number.
The logic which i wrote is
Begin of t_PoolSTO_out,
BOLNR type LIKP-BOLNR,
EBELN type EKBE-EBELN,
EBELP type EKBE-EBELP,
VBELN type LIKP-VBELN,
VBELNV type VBFA-VBELN,
End of t_PoolSTO_out.
Data: i_PoolSTO type Standard table of t_PoolSTO_out.
Select
a~BOLNR
c~EBELN
c~EBELP
a~VBELN
b~VBELN
from LIKP as a
Inner Join VBFA as b on aVBELN = bVBELV
Inner Join EKBE as c on bVBELN = cBELNR
into Table i_PoolSTO
Where a~BOLNR in S_LBLNE and
b~VBTYP_N = 'R' and
b~BWART = '641'.
My doubt is whether the logic works or not i Mean does i getall the rrecords based on the requirement.?
If not please tell any alternative logic?
Thanks,
Gopi Anne.Hi Gopi,
Your code is Good.
But try to avoid Inner join with more number of Tables ...because this is a performance issue..
try to use..
select (primary key fields mainly,other fields) from LIKP into itab where bolnr in p_bolnr(paramater).
next try to use for all entries option..
select (primary key fields mainly,other fields) from VBFA for all entries in itab where (give the condition)....
simillarly do for the other select ....ok this will try to reduce the performance issue....
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo -
I cannot get my Bose speakers to work. They are plugged correctly and not in the headset jack
I have a new iMac 21.5 inch Led. 16.9 widescreen computer. I purchased Bose speakers. They are set up correctly and plugged in the back of the monitor in the correct slot (not headset slot) and I cannot get sound through the Bose speakers. I have tried the speakers on another computer and they work properly. Can you help?
Hi. If the speakers are using a standard 3.5mm plug, they need to be plugged into the headphone jack. Please clarify which jack you are using.
Stedman -
After effects color corrected clip not showing correctly in Premiere
Hello all,
I have recently made a short film with a few effects in Premiere and After effects CS4. I have used the Dynamic Link to accomplish this. I have added color correction with Color Finesse in After effects. The problem is I some of the color correction is not showing up in Premiere once it has finished. Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well. I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
Is anyone else haveing this problem?
Do you think it's something wrong that an update will fix?
Maybe a new codec?Describe the exect DL steps you took.
-
I am not able to Mobile Me email account to connect with iCloud or my Apple Mail program. Don't know if my settings are correct or not. Can anyone help me with this please?
http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards. -
Compile correct but not run java programs
I have problem. Java program copile correctly but not run. I can't understand this one.
**this is the error**
Exception in thread "main" java.lang.NoClassDefFoundError: suminda
Caused by: java.lang.ClassNotFoundException: suminda
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: suminda. Program will exit.The error is telling you that the jvm could not find a class named suminda. Are you aware that class names are case sensitive? Suminda is not the same as suminda for example.
This error usually happens when you haven't specified the classpath correctly. A simple thing to try isjava -cp . sumindaHere's some links that may help.
[http://www.kevinboone.com/classpath.html]
[http://java.sun.com/javase/6/docs/technotes/tools/findingclasses.html] -
How to Verify whether CAPolicy.inf Configuration was picked correctly or not ?
Hi ALL,
can you please suggest me a way to verify whether CAPolicy.inf Configuration was picked correctly or not during CA installation and if it was not picked up correctly where can I see the error messages what exactly went wrong ?.Hi,
I do not know anything about a logfile but if it was picked up then you see the settings in the certificate (e.g. keylength) or the settings for AIA/CDP are visible in the CA MMC in the externsions tab.
A not uncommon issue is that the file itself is saved as capoily.inf.txt file from notepad and then the CA install wizard ignores the file. so check the filename from a Windows command prompt.
Hope that helps,
Lutz -
Lens Correction filter not working?
I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.Jeff,
Thanks for the quick answer, but I still think the menu is misleading.
If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working? -
Olympus E-M1 and CA corrections (or not), probably for Eric Chan
Hi
E-M1 is rumored to have (I'd assume in raw files) finally parameters for CA corrections (first for Olympus, always was the case with Panasonic cameras)... however upon conversion from .ORF to .DNG I still can see that "WarpRectilinear" has only the data for only one plane (while .RW2 to .DNG has that for 3 planes)...
So what does it mean :
1) Adobe support being preliminary does not include that yet ?
OR
2) Olympus does not provide that info (for CA corrections) really like Panasonic does in their raw files (and that means that evil Olympus hardcoded corrections in their software /firmware in case of OOC JPGs/ )
Thank you.Closer to #1. Specifically, support for metadata-driven (opcode-based) lateral chromatic aberration for the E-M1 will be added in the next dot releases of ACR and Lr. However, note that we are almost ready to post the Release Candidate (RC) versions of the next ACR/Lr dot releases, and the CA correction will not be available in these RC versions (but will be in the final version).
-
Photoshop 3D files don´t appear correctly or not at all in After Effects
Photoshop 3D files don´t appear correctly or not at all in After Effects. What is the problem? OS: win 7
Did you ever find an answer to this. I just found the same problem.
Thanks -
(three-way color corrector) secondary color correction masks not working?
Hi I'm using PP 2014 on Yosemite. Anyone notice (three-way color corrector) secondary color correction masks not working?
strange. same stats here but im getting intermittent.... sometimes i can use the mask and the effect is only limited to the masked area. most of the time the masked area is ignored and the effect is applied to the whole image
-
Select query is correct or not
hai to all iam software trainee in core java
i have doubt on select query please give gudiance
select * from StudentDetails where Admnno=' "
i connected my application with ms-access db using jdbc-odbc
my question is i want retrieve data from ms-access so i use this select query is it correct or not
because
select * from StudentDetails this query working but it's working with where condition please help and try to understand my question
In advanced
thanks("select * from StudentDetails where Admnno ='' "+Admnno+"'")Is Admnno a numeric or character field? Either way, that syntax looks wonky.
For a numeric field:("select * from StudentDetails where Admnno = " + Admnno)and for a character field("select * from StudentDetails where Admnno = '" + Admnno + "'")db
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the tags that appear. -
Can any one tell whether the concept which i understood is correct or not
hai everyone
iam studying jdbc and this is what i understood about the basic concept .can any one tell whether the concept which i understood is correct or not
whenever the statement class.forName("driver class") is executed driver class is loaded and registered with drivermanager.Internally drivr class contains a static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
whenever the statement class.forName("driver class") is executed,static bloc is executed first and driver class is registerd.
concept as i understood about DriverManager:
suppose there may be situations where an application developed in java has to deal with one or several databases and this is accomplished with one or different driver classes.so all these driver classes are to be managed and this is done by DriverManager class and in order to make the driver class itself known to the driver manager we have to register the driver classes with the help of registerDriver() method of DriverManager class because DriverManager is the class which will attempt to load the driver classes into memory..
If we look at the last statement: DriverManager is the class which will attempt to load the driver classes into memory.Here i have some doubt if DriverManager class loads the driver class after registering the driver class then what does the statement class.forName("driver class") will do which is also used to loaad the driver class.
what i understood is since the responsibility of loading the class is done by class.forName("driver class") only registering of the driver class is done as the class is alredy loaded.
help me to clear my confusion
thanks in advancehai everyone
iam studying jdbc and this is what i understood about
the basic concept .can any one tell whether the
concept which i understood is correct or not
whenever the statement class.forName("driver class")
is executed driver class is loaded and registered
with drivermanager.Internally drivr class contains a
static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
}That's supposed to be the case, but there's no way to guarantee that every driver actually has that static init. I don't think I've ever run across one that doesn't, though, so, yes, you're basically correct.
whenever the statement class.forName("driver class")
is executed,static bloc is executed first and driver
class is registerd.When you do Class.forName(), the class is loaded and initialized. Whenever you initialize a class, its static init blocks are executed, yes.
concept as i understood about
DriverManager:
suppose there may be situations where an application
developed in java has to deal with one or several
databases and this is accomplished with one or
different driver classes.so all these driver classes
are to be managed and this is done by DriverManager
class and in order to make the driver class itself
known to the driver manager we have to register the
driver classes with the help of registerDriver()
method of DriverManager class because
DriverManager is the class which will attempt
to load the driver classes into memory..Except for that last part, yes.
DM keeps track of loaded drivers, and gives them a chance to parse the connection URL when you call getConnection. DM does NOT load the driver classes into memory, however. That's done when you call Class.forName.
what i understood is since the responsibility of
loading the class is done by class.forName("driver
class") only registering of the driver class is done
as the class is alredy loaded.Right. -
How to validate inserted xml data in oracle is correct or not
(i.e.how to validate xml syntax and tags are correct)
XML data has been inserted in Oracle database.Once inserted
I want to validate that data entered and tags inserted are correct
or not.
Pl helpSome small remarks after a life time of write that small notepad.
Don't use XMLIsValid() - Apperently it was once ment for use in table constraints only AND the most annoying part, it doesn't give you a proper error message.
More usable is schemaValidate() - it throws a useful error message... I never came around to update that post or write a proper one while using schemaValidate().
I would be against advising / using a Java wrapper to achieve this goal unless you are on a pre 9.2 database version. Registering, validation and such is optimized (in memory) in Oracle from the beginning in 9.2.0.3 and onwards to avoid for instance reparsing of the XML Schema itself. If a XML Schema is registered a lot is optimized including DOM, which will be avoided and "outsmarted" by using XOB objects (see the Oracle manuals only a few hits and those will point you directly to the optimizations at hand). -
The below is it correct(if not add/del appropriatelly):
the below is it correct(if not add/del appropriatelly):
"dreamweaver cs4 can develop JSP web sites, but need along a JAVA IDE (like NetBeans) for some compilations etc. This is NOT true for other scripting languages (like ASP,ASP.NET,PHP,CFM) where dreamweaver cs4 can stand-alone without help from external tools."The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
Warranty - http://www.apple.com/legal/warranty/products/ipad-english.html
The standard warranty is one year. However, you can purchase an extension of the warranty to two years. You can also purchase Apple Care + which covers user damage to the iPad, like a broken screen.
Cheers, Tom
Message was edited by: Texas Mac Man
Maybe you are looking for
-
Hi, As you may know that During shipment cost document process from the delivery it is created a PO automatically for freight charges. From which transaction this PO created autonmatically. Secondaryl,During this PO creation ,I want to create this PO
-
How to embed html in a formscentral form
is there a way to embed an HTML page in a forms central form?
-
Why my power map doesn't work and the button of power map is grey
After I finish installing my power map plung-in for excel, I find that this plung-in can't work and the button is grey.Anyone meet similar problems could help me?
-
Disk Utility : Cannot set burn speed
I've created a DVD disc image from DVDSP3 and want to burn it to a new DVD-R at less than 8x speed, but Disk Utility has greyed out the speed setting. What am I doing wrong? Thanks! -Bob.
-
Logistics Invoince Verification on Stock Transport Order without Goods Rec.
Hi... Can i do a Logistics invoice verification with a STO reference, without any good receipt in this STO? Thanks in advance...