Corrective actions setup problem

Hi guys!
I have problem with setup corrective action for listener avaliability when status is down and action doesnt work at all. I have create template Listener_stuff with metric trasholds for Response Time (msec) and Status is down. Other details for template are:
Corrective Actions
Critical LSNRCTL START LISTENER_TESTDB2
Allow only one corrective action for this metric to run at any given time (checked)
Advanced Threshold Settings
Critical Threshold: Down
Number of Occurrences: 1
Collection Schedule: Every 1 Minute
And corrective action details for listener are:
Name: LSNRCTL START LISTENER_TESTDB2
Description: lsnrctl start LISTENER_TESTDB2
Target Type: Listener
and *'OS Command' Corrective Action* details are:
Command Type: Single Operation
* Command: lsnrctl start LISTENER_TESTDB2
I have saved credentials for that specific listener and host where listener resides. Also i have created notification rule when specific listener is down and that work ok.
Other details are:
Grid control OMS is version 10.2.0.3 , and agent version on test host is 10.2.0.4.
Host has Red Hat Linux EL 4 OS
Please help me with this, or send me some links with more detailed corrective action examples.....
Thank you!
Edited by: rootsman on Jan 11, 2012 1:21 AM

And this is what i receive related to corrective action job:
Corrective Action=LSNRCTL START LISTENER_TESTDB2
Created By=SYSMAN
Task Type=Host Command
Target Name=LISTENER_TESTDB2_testdb.domain.com
Target Type=Listener
Timestamp=Jan 11, 2012 12:52:30 PM CET
Status=Failed
Metric=Status
Metric Value=0
Severity=Critical
Rule Name=Listener_test
Rule Owner=TEST
Step Output=
Command:Output Log
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 11-JAN-2012 12:52:29
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Starting /db/agent10g/bin/tnslsnr: please wait...
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 2: No such file or directory
~~~End Step Output/Error Log~~~

Similar Messages

Problem scoring assessment with multiple correct actions

I've created an assessment simulation in Captivate 4. On several slides, I have two click boxes set up to be the correct action. The user can click either one, receive credit for a correct response, and advance to the next slide. The problem is that the final scoring slide (and the data that gets passed onto the LMS) assigns two possible points to a slide like this (one for each of the two click boxes) instead of one. The result is that when the user clicks either of the two correct click boxes, it is scored as getting only 1 out of 2 points on that slide. Any ideas on how to make either click box count as a correct response, but not both of them count towards the total possible score? I have tried using Advanced Interactions to adjust the Points, Add to Total, Track Score and Report Answer settings, but haven't found a combination that works. Thanks in advance for any help you can provide!

I don't get it. What is the significance of standby 1 and 2 VS standby 14 and 40? The only difference I noticed is the lower number of standby group goes with primry and higher goes with secondary.
If possible, can you also try the same config you used before except swapping the group number?
e.g.
interface VLAN 32
ip address 10.10.13.2 255.255.255.0 secondary
ip address 10.10.32.2 255.255.248.0
standby 40 ip 10.10.13.3
standby 14 ip 10.10.32.3

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

Uccx delay action setup issue in CDA

Hi All,
i am trying to setup a pop up mesg come up for agents in work flow groups under "agent management work flows" for startup event. but i want that to come up in 60 sec delay. so this require an delay action setup configuration. which is fine. i setup the following as you can see in the attached pic. it apears the processes event during delay is not working. either i have it checked or not, it delays/pauses 60 sec. i want to have the CAD processs events during startup but then after 60 sec , it should display the pop up msg. system ver is 8.0.2.11005-20 . do you think i am not doing it right? OR is it a bug?
much appriciated.
thanks
vijay

I had a bit of trouble understanding the exact problem, but I think you are saying that no matter how you configure this to work, the application simply freezes for 60 seconds until the delay timer expires, then the pop up dsiplays, then the agent can actually use CAD. Is that correct? If so, then yes, this is how the feature has worked for the rest of us, and we simply don't use it.
Relevant discussion:
https://supportforums.cisco.com/message/3673990#3673990
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Corrective Action on Agent Unreachable?

Let me first explain exactly what I am looking to do. My current setup is a repeating job that recreates connections (tunnels) to the agent boxes every 15 minutes to ensure that connections stay up. This can get hung up and drag the network down. Ideally, I would like to setup an automated system to correct the issues. If an Agent becomes unreachable, I want to initiate a corrective action that will try to recreate the connection. I was told that the corrective action would be run ON THE AGENT, which would inevitably fail if there was no connection. So a 2nd task would be added to the corrective action in response to the first failed task, that would run the connection scripts on the OEM box and re-establish connection. If that fails as well, then I would like a notification to be sent out (incident rules typically).
That is my ideal set up. Here are the issues I am running into. The first is that the Agent Unreachable does not seem to be an editable metric. It is listed as a metric called Response > Status, under All Metrics. However, under Metric settings, it can not be edited, and thus, I do not see a way to tie a corrective action to this metric. Once I do tie the corrective action to this metric, do I need to set up a job to run in the corrective action or is the corrective action basically a job that runs in response to an event? That is how I understood it...just looking for verification. It would be greatly appreciated if I could be pointed in the correct direction.

I'm not sure you can do this through a metric alert corrective action, but it sounds like a great enhancement request. You didn't mention the EM version that you're using, but if you're on EM12c you can implement something like this through an advanced notification method. There's more than one way to do it but here's what I just tested and confirmed will work:
1) Generate an ssh key for the oracle user running the OMS, and save the key with no password
2) Copy the generated public key to $HOME/.ssh/authorized_keys for the user running the agent on the host where you would like to restart the agent
3) Create a shell script owned by the OMS oracle user that contains the line "ssh [email protected] /pathtoagent/bin/emctl start agent"
4) Log in to EM12c as user SYSMAN and create an advanced notification method that calls the shell script created in step 3
5) Create an incident ruleset applying to the agent target
6) Create an rule in the ruleset that applies to incoming incidents where Category = Availability and Severity = Critical
7) Create an action for that rule that calls the advanced notification method from step 4
Then stop the agent to test it. Once the incident is generated, the notification method will run, ssh from the OMS host to the agent host, and start up the agent again.
It doesn't look like you can pass parameters to the notification methods, so you may need to create a separate notification method and separate shell script for every agent you monitor.
You could probably also do this through an SNMP trap advanced notification if you have other management software on your network that could catch the trap and respond to it appropriately.
But for me the real question would be: why are your agents going unreachable so often that you need to bother with this?

Correct the 2 problems before updating this airport wireless device

Hi, guys.
I want to access my Time Capsule from the internet.
But i already have a router establishing my internet connnection, so i've set it to connect using Ethernet and wireless mode is off.
This setting doesn't show the "share disc over WAN" and i need that. (As far as i can tell). Therefor i have to switch the connection mode from Off (Bridge Mode) to share a public IP - this enables the "share disc over WAN" option.
But TC returns this message to me when updating the device. "Correct the 2 problems before updating this airport wireless device".
I'm confused? Cuz i thought they should mirror my Routers local IP's?
What do i do? Please help, any advice is much appreciated.

The Asus model that you mentioned is definitely a router, so it is handling DHCP services for your network.
If you have the Time Capsule set up in Bridge Mode, I cannot understand why you are getting a message about DHCP address conflicts....since DHCP is turned off when the Time Capsule in Bridge Mode.
Unless....you have tried to change some settings around manually.
It would probably be best to start over and perform a factory default reset on the Time Capsule, then configure it again. The last setting to check before you click Update would be to make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)".
As far as connecting from the Internet....that's another question since everything that I've seen assumes that the Time Capsule is configured as the main router on the network. I cannot recall seeing a setup when the Time Capsule was not the main router on the network, but will check around.

12c corrective actions

Hi all,
Am studying the document http://docs.oracle.com/cd/E24628_01/doc.121/e24473/jobs.htm for setting up automatic corrective actions for common alerts.
Has anyone did setup for automatic corrective actions for archive area warning/critical? Means if archive area cross threshold value autmatically a archive backup has to run.
Thanks,
Baskar.l

Yes, for several years i ran CA for archive, tablespace and many other alerts. I would recommend writing the script/job and testing thoroughly on a sample instance, and then implementing that script in a template. The preferred credentials must be set and the user who applies the template must have the correct credentials or it will appear in Broken Jobs. Make sure output/log is collected, status is transferred back to OEM, and then set the correct notifications for CA status so you know if it succeeded or not. Typically we ran the CA at Warning, and ticketed/paged at Critical. You can still set the CA at Critical, but you will want to have someone look into it at that time as well. The reason for this is that if it jumps from Clear to Critical, it will never run the job, and that may be all you needed. Once the job runs, the DBA can just monitor the backup. If it just hits Warning, the job runs, and if all goes well, the alert will clear. DBA doesn't have to do anything. In notification rules, you can set Notifications for CA status success/fail. I would suggest watching this as well.
Another key piece, at least in 10/11, you can store your CA in the CA Library, but any changes will need to be made in the template and applied to all targets again. Changing in the CA Library will NOT reflect on the target.
Hope that helps.

CAR(corrective action request)

HI guru's
Is't possible to create CAR number from QM module or QM notification
One of the requirement is, they want to create CAR(corrective action request)
i am tryingto create Q3/F3 notification number is a CAR number
but the thing is some time if the problem arise from customer /vendor also possible
how can I fulfill this req.
If anybody knows plz tell me
thanks

Rajesh
thanks for your response
Can you tell me which function module you are using for this(action box)
is't possible to create CAR number from notification
plz guide me in detail
thanks

Controlling Corrective Actions from Cloud Control 12c

Hi Experts
we have setup corrective actions on some process that runs on our host
is there a way we can control the corrective action when in case or maintenance...
Example: if the host is down for maintenence prupose how can we stop corrective actions script to kick off and stop sending notification from the cloud control 12c.
Thanks
Edited by: TechAdmin on Nov 12, 2012 9:32 AM

Blackouts can be used to disable collections during maintenance cycles.
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/emctl.htm#BABHFDII

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

Setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

Hi marsano,
Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
* Right-click the icon and choose ''Run as Administrator''
If that doesn't help then do a clean reinstall.
# Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
# [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
# Run installer
Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
Hopefully this helps!

Retrieve alert values for use as parameter in corrective action sql script

I am trying to write a corrective action sql script to kill a session that is blocking other sessions. I have the "blocking session count" metric set and the alert is firing correctly.
Is there any way to retrieve the sid and serial number from the alert generated and use it in a corrective action sql script?
Here is the alert generated:
Target Name=myproddb.world
Target Type=Database Instance
Host=myprodserver
Metric=Blocking Session Count
Blocking Session ID=SID: 522 Serial#: 5228
Timestamp=Mar 4, 2008 5:57:12 PM EST
Severity=Warning
Message=Session 522 is blocking 1 other sessions
Notification Rule Name=Testing Corrective actions
Notification Rule Owner=sysman
Clearly the sid, and serial # is contained within the alert Message field
what I want to write for the sql script is :
alter system kill session '%sid%,%serial_no%' immediate;
and have GC pass in the sid and serial_no to the script.
The "Target Properties" listed on the right of the Edit Corrective Action screen lists minimal details pertaining to the alert and certainly not the session sid, serial no.
Generically, is there any way to retrieve the values from an alert and use them in a corrective action script or job?
I've looked into getting the values from the mgmt$alert_history table, but I'm hoping that GC can pass the values to the sql script.
thanks in advance for your help.

Hi
You can implementing a procedure like this.
1. When a block session count alarms occurs, there is a column in the v$lock that you can examine.
#!/bin/ksh
#kill_block_session.sh
#first export your variables
export ORACLE_HOME=/oracle/product/10.2.0.3
export ORACLE_SID=SIDNAME
$ORACLE_HOME/bin/sqlplus "/ as sysdba" << EOF
execute immediate killed_blocks;
EOF
# end
The killed_blocks is a procedure:
create procedure
declare
v_sid varchar2(15);
v_serial varchar2(15);
-- now a sql query that retrieve the sid and serial
-- you can obtain these values from v$session and v$lock
select vs.sid,vs.serial into v_sid,v_serial
from v$session vs,v$lock vl
where vs.sid=vl.sid
and vl.block >0
-- After this, you execute a dbms_put line with these
-- values
But you understant that this response action is very dangerous, because its possible that you kill sessions that the blocking are transitient.
You must examine your enviroment and your application and establish the metric like UDM and not for only session blocking count.
You must to see:
- The type of block
- The ctime time in the v$lock for to understatn the amount of time to determine that the block is need killed.
- In my opinion you need a special UDM and deactivate the blocking sesion count
If you want help to create this UDM send me a mail to [email protected]
Regards
Robert

Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

My iPhone 4s will not charge in car or truck. It would appear after research that this is a software issue with ios5. Will there ever be a patch to correct this infuriating problem?!!!

My iPhone 4s will not charge in car or truck. It would appear after research that this is a software issue with ios5. Will there ever be a patch to correct this infuriating problem?!!!

Mine charges just fine, as does everyone's iPhone 4S that I know. Apple even sells a number of car chargers that are certified to work:
http://store.apple.com/us/browse/home/shop_iphone/iphone_accessories/car_audio
Perhaps there is a problem with your charger or the outlet you're using in your car/truck.

Corrective actions setup problem

Similar Messages

Maybe you are looking for