Corresponding Sales Organization of a project, starting from table COVP.

Hello,
I need to find the corresponding sales organization of a project from the table COVP(this is for an interface). The sales organization is in table proj. But to get there, i need a connection. I thought about this connection:
COVP-OBJNR = AFVC-OBJNR - from afvc, take aufpl(Routing number of operations in the order)
AFKO-AUFPL = AFVC-AUFPL - from afko, take pronr(Project definition)
PROJ--PSPNR = AFKO-PRONR.
And from proj, take the corresponding sales organization.
What do you think?I am giving the right connection and all the necessary elements?
PS: This is only for network elements, for WBS elements I know the connection.
Thank you,
Efren
Edited by: Efren23 on Feb 22, 2012 8:55 AM

Hello,
Thanks Gokul.I've found the connections in this link:http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9659.
The only connection that was missing was between COVP and AFVC. But i think so and you agree that the right condition is
COVP-OBJNR = AFVC-OBJNR.
I will leave the question not answered until tonight, maybe others have other suggestions.
Thanks,
Efren
Edited by: Efren23 on Feb 22, 2012 10:33 AM

Similar Messages

IN SD project starts from which phase?

IN SD project starts from which phase? End in which phase?

dear srinivas,
for any project there are 5 phases which are calling as ASAP methodology
project preparation is the first phase planning about that project which is the starting phase
golive and support ( which call as continious improvement ) is the last phase
rewards if it helps
siva

Project started from past

Dear all,
Could you help me on the following question?
Generally speaking, the start date of the project is today.
Now, my project started more than one year ago.
Although I set the start date of the project in 2006, the basic time of the network and activities still starts from today.
How can I make the activities and network start from 2006? How should I configure the scheduling? Please give me some clues.
Thanks a lot.
Judy

In Planning Board under Settings->options, set "Start in the past" greater than 365 and run scheduling. When this entry is blank system rum todays schedule and reset the date to current date.
Venkat

Reading the description of Sales document type and Profit centre from table

Hi
I want to print the description of Sales document type and Profit center on output
I have checked in table TVAK and CEPC but i am unable to pick description against the code
Can anyone please suggest from where can i capture the description of sales document type and profit centre
Thanks and Regards
Sunil Srinivasan

Hi
If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
For sales Document type description you pass the VBAK-AUART values into table TVAKT table and get the values for TVAKT-BEZEI is you sales document type description
For Profit center description goto table CEPCT and enter the profit center you will get the
KTEXT
LTEXT
MCTXT
regards
Prashanth
Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

My iDVD project won't start from the menu.

When I create a DVD, it will not start from the menu but goes directly to play. I can force it to the menu by clicking the "Disc Menu" button on my remote, This happens on both of my DVD players, one or which is a Bose system. I didn't have this trouble with DVDs created using my older G5 iMac. This doesn't happen on all DVDs using the newer iMac. I've used the "Revolution" theme and it seems to work OK. For this current project, I used "Full Screen" from the list of older themes.
I'm using iDVD 7.2.1 on an Intel iMac running OS10.6.8
Thanks for your help,
Jim

Go to the Map mode in iDVD and make sure there are no items in the far left hand Autostart bin.
If there is just drag it out, save the project as a disk image, File ➙ Save as Disk Image menu option, and test with DVD Player. If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Happy Holidays

Business process in sd module starts from pre sales activities & ends in --

business process in sd module starts from pre sales activities & ends in billing or payment collection....... pls tell the answer....

Hello,
It depends upon the business process of the client. some time it will be like
Inquiry --> Quotation --> Sales order --> Delivery --> Goods Issue --> Invoice --> Payment.
But in some of the cases enquiry may not be there in the process, and even some cases quotation too and these both are not madatory.
In SD point of view we are only bothered upto invoice, but the process end once we receive the payment.
Prase

Duplicated Reqments when generating a sales order starting from a quotation

Hi to all,
we have a problem when we create a sales order starting from a quotation with ATP check activated on both the objects.
The problem is that the system does not delete the requirements of the material on the quotation and so the requirements are duplicated (from quotation and sales order).
The quotation rows are correctly closed but the requirements are still alive.
Have you got any suggestion to solve it?
Thanks in advance!
Maria

Dear Sai,
Thanks for this note I am going to try it, however I have some concerns because the issue is only happening in production, with 1 custoemr only, and QA is an updated copy of production and I could not replicate the error in QA using the same customer....
If anyone has any other ideas please I would appreciate it
thanks
Kikas

When I start new project files from previous project are displayed

WIN 8 PRE 9   PAL (UK)
I have PRE 9 since new and gave up with it as it contuinually crashed.   I am trying again but find when I open a new project all the old media files are displayed on the right.   I delete them and then drag and drop new ones in, but it still shows the old ones.   File names are the same as previous project but in a different drive and directory.   When I try to do anything it asks where are the old,deleted, files
I thought with version 9 the problewms would be ironed out.   Apparently not.
I have found DVD Styler Freeware is excellent and produced a simple DVD in about 5 minutes.   I may be doing something wrong in PRE9 but do I need to be Steven Speilberg to get a basic DVD burned?

I believe you have two problems. One of misunderstanding, and one of having moved / deleted files from your hard disks.
The misunderstanding:
Premiere Elements consists of two separate but connected programs - the Editor with which you create your video projects and the Organizer which is a media manager into which you can import still images, videos, sounds and PDF files and then rank, organize, tag, make albums from and do many other activities.
The Media pane in the Organize tab in the Premiere Elements Editor is a mini-view to the main Organizer program and will show you all the media on your computer that you have imported into it. This initial panel is NOT project specific. To see the media for the specific project you look to the Project pane in the Organizer tab.
These pages from the manual at http://help.adobe.com/archive/en_US/premiereelements/9/premiereelements_9_help.pdf may be helpful:
Moving/Deleting Files problem - the 'Where is ...' issue
The Organizer is a database and records the where and name of media files that you have imported into it. So long as you use the folder and file management features of the Organizer, it keeps track of the files. But the moment you use Windows Explorer to move or delete files this does NOT update the Organizer database and it loses track of them.
The Editor also keeps track of files used in Projects. If these files are moved or deleted, then the Editor will prompt for their location.
Resolution
For the Organizer issue use Find> All Missing Files (in the Elements Organizer, not the Editor) . After a while you will see a list of all files in the Organizer for which the originals are no longer in their recorded location. As it sounds as though you are not making use of the Organizer, the simplest way to resolve this is to select them all and press Delete. This will delete them from the catalog.
For the Editor issue, put copies of the files back where the Editor is looking for them, then in the Project pane of the Organizer tab delete them from there. Then you can delete the copies from the hard disk.
You might also find the Elements 9 Organizer manual of help - http://help.adobe.com/en_US/ElementsOrganizer/9.0/Using/index.html
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Sales from sales organization,0362 dist.chan. 02,plant OMNM are not defined

Hey All,
I'm facing an issue when creating an order and trying to input a material on it.
I'm receiving the above error when I try to insert this material...the material is extended to that combination and also the customer I'm using is created for that sales area. (div. 09).
Is there something else I should check?
Tks in advance!
Andre

Hi
In- img-enterprise structure -assignment-sales and distribution
Assign sales org and distribution channel to plant
Here you have to check whether your plant OMNM is assigned to the combination of sales organization 0362 dist.chan 02 in the activity assign sales org and distribution channel to plant
Also check whether the delivering plant is maintained in sales org data 1 of MMR
Also some other important checks
1.Check whether your customer and materials are created in the correct sales areas
2.T code VOR1 common distribution channels
3.T code VOR2 common divisions
4.T code OVAO combine sales orgs
5.T code OVAM combine distribution channels
6.T code OVAN combine divisions
7.T code OVAZ assign sales order types to sales areas
After all these checks please log off from SAP for a minute and the relog and test with a fresh order
Regards
Raja
Note please close the threads wherever possible

Help scheduling tasks from both project start date and from later deliverable dates

I am trying to set up a project scheduling template for a number of similar projects.
These projects will require initial work to be completed at the project start date, working through the critical path to an end date.
However. Certain milestones/deliverables are required on specific dates in teh project (they are recievable by internal customers on firm dates). I am having trouble scheduling my predecessors for these deliverables to occur as late as possible.
I.e. I want my procurement to start x-weeks (depending on the task) before the deliverable is due.
Trying to manually set the deliverable date and hoping project will work back and adjust the predecessors to fit isnt quite working... is this possible?
Im using MSP2010 standard

nategalambos,
Actually this is probably a very common scheduling scenario. Schedules often have interim milestones, sometimes with fixed dates.
Just-in-time scheduling has received a fair amount of press in the past but in my view it has some very real negative downsides. I believe the best plans have contingency built in to allow for unknown problems. For example, let's say you have a task that
must deliver an item on a particular date and in order to build that item you need to order material. You know the built and test time, it's all done by machine, takes 10 days, and doesn't vary from item to item. The lead time for the material is 6 weeks,
so you set up the schedule to place the material order 8 weeks before the delivery date. However, there is a problem, the vendor who supplies the material has a problem at his factory and the material is delayed such that it won't be delivered in 6 weeks but
instead it will take 8 weeks. Because you have not allowed for contingency in your plan, your delivery date is now in jeopardy.
But to answer your question, one way to set up the predecessor you want is as follows. Using my example above, the Place Order task, let's say the delivery date task is task ID 5 and is a milestone. The place order task could have a predecessor of 5SF-40d,
or 5FS-40d will also work if the place order task and the delivery date are both milestones.
Hope this helps.
You might also want to read Trevor's response to a related post on the following forum: http://answers.microsoft.com/en-us/office/forum/office_2010-project/field-for-start-based-on-as-soon-as-possible/45829d8b-b073-4fbf-8126-0bdac5c7684c
John

How to find out Sales organization of a sold to party from tables

Hi all experts, I have the following questions:
1. How to find out Sales organization of a sold to party using tables?
2. Also please tell any function module which gives relationship between sold-to-party and sales organization to which it belongs.

Hi,
Check table CRMM_BUT_LNK0141 to obtain the sales area of a BP (by BP Guid).
If you need the sales office and sales group, read GuidSet of that table and check table CRMM_BUT_SET0140 to list the sales office and sales group by that Guid set.
There are some function modules too:
CMS_BUPA_ORGDATA_GET_BL among others.
Regards,
Susana Messias

Oracle Projects Differences from 11i to R12

Hello All,
Currently we are upgrading from 11.5.10.2 to R 12.1.3
We have oracle projects implemented in 11i.
I am researching to get the differences occurred in oracle projects functional and technical from 11i to R12
It will be a great help to us if we could get some documents or a link which shows the differences.
Thanks and Regards,
Ankit Vishwakarma

Project new features
Oracle Project Foundation
New Concurrent Process
ADM: Purge Obsolete Projects Data
Oracle Project Costing
Federal Budgetary Accounting for Project Expenditures via Subledger Accounting
Contingency Worker Clearing Projects to allow CWK to charge multiple projects
Additional Project Information in Oracle Time and Labor (Project Name and Task Name)
Federal Budgetary Accounting for Project Revenue
Additional journal entries are available in Subledger Accounting for the required Federal Budgetary entries.
Date Effective Funds Consumption
Project Type option that requires cost and event transaction dates to fall within the agreement start and end dates.
Transactions are only billed against the agreement if the entire transaction amount can be funded (no partial recognition) for both revenue and invoicing.
Without enabling this option, revenue generation supports partial billing for transactions.
New Parameters for MGT: Invoice Review
Project Status
Project Closed After Date
Project Range
New Parameters for MGT: Unbilled Receivables Aging
Project Status
Project Closed After Date
Project Range
Oracle Project Management New Audit Process for Project Performance Reporting Setup
AUD: Project Performance Reporting Setup
New Parameters for Refresh Project Performance Data Process
Actual or All Amounts (Plan and Actual)
Workplan Version
Financial Plan Version
Workplan EnhancementsAbility to Delete Published Workplan Versions (except the latest published version, baseline version, and workplan versions included in a program hierarchy) Usability Enhancements
Update Work Breakdown Structure page is now obsolete.
View, maintain, and update a workplan structure from the Update Tasks page.
Where no latest published workplan version exists, the current working version displays on the Update Tasks page when navigating to the Workplan Tasks.
Indent or outdent multiple workplan tasks in a single step.
Confirmation, information, and warning messages appear on HTML pages during Apply Latest Progress as well as the Submit Progress processes. Messages include status information during processing and the availability of the latest progress information.
New Public API for Creating, Maintaining, and Deleting Programs New set of public API procedures:
Designate a project as a program and indicate whether projects linked to the program can belong to multiple programs.
Create links from a program to one or more projects
Update links from a program to one or more projects
Delete links from a program to one or more projects
Budgeting And Forecasting Enhancements Enhanced Automatic Calculation and Derivation Logic
For plan lines that do not have a specified a quantity, the amount is no longer copied to the quantity field with the rate value set to 1.
Rate now has a lower precedence than quantity and amount in automatic calculations. The rate will be re-derived when the quantity, rate and amount are entered at the same time for a plan line.
When the burden multiplier is overridden by updates to the raw cost or burden cost, subsequent calculations of the burden cost will use the override burden multiplier. The same is true when the markup percent is updated by changes to plan line components: the override markup percentage will be used in revenue calculations.
Enhanced Handling of Override Rates on Budget / Forecast Lines
Override rates for a planning transaction on Edit Budget and Edit Forecast pages.
o Raw Cost Rateo Budened Cost Rateo Bill Rate
Override rates are applied to all existing and new periodic lines for the planning transaction.
Average rates fields on these pages are now disabled for entry and are used for display only.
Simplified Addition of Planning Elements and Resources
New but unbudgeted tasks and resources can be added to a budget or forecast version.
Add either all new tasks and planning resources or new tasks only to the current plan version.
Self Service Expenditure Inquiry
Ability to drill into expenditure details from the Financials tab.
Reporting Pack for Generation and Distribution of XML Publisher Reports
A reporting pack is a set of report templates and recipients by project role.
The Generate Reporting Pack concurrent program emails the reports generated from the report templates based on pre-defined intervals.
The report template establishes each report’s layout and content.
New reports templates are configured using XML Publisher tools.
New or modified reports can be added to an existing reporting pack or be used to create an entirely new report set.
Predefined data definition files that contain XML tags for performance measures and project data are provided.
Predefined Reports:
Project Change Document Report
Project Committed Cost Report
Project Cost Detail Report
Project Cost Labor Report
Project Cost Summary Report
Project Earned Value Report
Project Financial Summary Report
Project Forecast Summary Report
Project Revenue At Risk Report
Budget Integration with Federal Budget Execution and/or 3rd Party Budget
The budget integration workflow supports integration with the Federal Budget Execution module..
The workflow can be customized to interface budget lines to external budgeting applications.
Microsoft Project 2007 Certification
Integration with Microsoft Project 2007 is supported.
Project Performance Reporting: Additional MeasuresYTD, QTD and At Completion calculated measures are available on the following pages:
Performance Overview Period-to-Date
Summary/Analysis
Task Summary/Analysis Resource Summary/Analysis
Project Performance Reporting: Inter-Project Revenue / Billing AmountsInter project revenue / billing amounts are available on the following pages:
Project List View Workplan Cost
Exception Reporting Performance Overview
Task Summary/Analysis Resource Summary/Analysis
Period-to-Date Summary/Analysis
Supplier Cost DashboardSubcontractor Payment ControlsSupport for Pay when Paid Scenarios
A new “Pay when Paid” payment term for subcontracts automatically places holds on all subcontractor invoices under that subcontract until the corresponding customer payment is received.
Subcontract Payment Controls workbench allows project manager to manage the holds, with visibility into both the customer invoices and the related subcontractor invoices.
Workflow notifications about the receipt of the customer payment allow the project manager to automatically or manually release the subcontract invoice.
Associations between the customer invoices and the subcontractor invoices may be automatically maintained based on the billing of project expenditures for cost-plus contracts, or may be manually maintained for fixed price contracts.
Payment Controls for Subcontract Deliverables
Support for the tracking and monitoring of subcontract deliverables that place automatic holds on subcontractor invoices in the case of noncompliance.
Oracle Procurement Contracts allow a subcontract administrator to specify payment impact controls that will take effect when a subcontract deliverable is not met.
From the Subcontractor Payment Controls workbench, the project manager can view a checklist of the all the current subcontract deliverables, to assist in evaluating the subcontractor status prior to releasing monthly progress payments.
Oracle Project Resource ManagementResource Search Enhancements
Resource Search by Email Address
Resource Search by Person Type
Streamlined Navigation on Staffing Home
Cross Validation of Project and Assignment Dates
Requirement start dates are equal to or greater than the project start date and less than the project end date and that finish dates are equal to or less than the project end date but greater than the project start date.
Assignments cannot be added beyond the project end date.
A project team role end date cannot be beyond the project end date. If the roles are created before the project end dates are entered, users will receive an error if they later try to enter an end date that is earlier than the end date for existing roles.
When project transaction dates are moved corresponding assignment dates are validated against the new project dates. If the new project transaction dates fall outside the dates for existing assignments, users are given an option to shift the assignment dates or cancel the date adjustment.
Defaulting of Work Patterns’ From and To Dates
Work pattern from and to dates will default from the requirement start and end dates.
Improved Exception Handling of Maintain Project Resources Process
PRC: Maintain Project Resources delivers improved exception handling and notification when it encounters errors while processing employee records.
New Public APIs for Resource ManagementThe new PJR APIs fall into the following four categories:
Requirement Public APIs
Assignment Public APIs
Candidate Public APIs
Competence Public APIs
Organization Authority: Obsolete Forecast Authority
Removes the forecast authority functionality from the organization authority form
Removes existing security data relating to forecast authority.
Replaces the PJR forecast functionality with the new HTML based forecasting functionality. The new forecasting functionality has its own security mechanism and does not honor the old forecast authority model.
Improves the performance of security calls to organization authority because the existing security data is being removed.
Oracle Grants AccountingAward Budgeting Enhancements Budget period validations
Budget periods will not be validated across award budgets when those awards fund a single project.
Flexibility to establish award budgets based on the actual duration of the award, while not being confined based on the existing budgets already established for the project.
Automatic summarization of project budgets
With the new budget period validations, automatically summarize to a project budget viewable in Project Status Inquiry.
Two profile options have been added to identify the budget entry methods that will be used to summarize the project budgets.
Budget Line Sorting Option
Sort budget lines by Resource name, or by effective dates for budgets with date range periods. Provides the flexibility to view the budget lines by period or by budgeted resource.
Award Status Inquiry Enhancements View by budget period
Allows the Find Award Status window to be limited to a single period, range of periods, or inception to date for a particular award.
Reflects the budget periods entered on the award budget.
GL and PA Date Parameters on Find Expenditure Items window
GL and PA date parameters have been added to the Find Expenditure Items window.
GL Date Parameters on Find Commitments window
GL Date parameters have been added to the Find Commitments window.
KKG

Please tell me a BAPI to get Closing balance of customer account based on Sales Organization?

Hi Experts,
A requirement has come up where I want to get Customer closing balance based on its sales organization as this particular customer is extented to 2 different sales organizations. I want to get the closing balance of individual sales organization vise.
Please tell me a BAPI to get Closing balance of customer account based on Sales Organization?

AFAIK there is no such BAPI, cause there is no database table with balance for customer per sales organisation. (No KNCx table for VKORG)
First ask functionals (*) how to recover sales organisation from a FI document (I suppose for SD invoice it is easy if no merging between organisation) will be a little tricker for pure FI document like payment transactions (hope thet are quickly cleared...) Then start from non cleared records of BSID (also BSAD if you use a past date of reference, in case you have to add the records of BSAD with clearing date greater than reference date) and cross it with SD information to break FI into sales organisation.
Regards,
Raymond
(*) Ask for where do they store VKORG in FI documents

Intercompany Stock Transfer starting from Plant Maintenance

Dear SAP Experts,
We are planning to implement Intercompany Stock Transfer Process starting from Plant Maintenance side.
We would like to be able to order for maintenance work order material which belongs to different plant.
After adding such material to work order system should automatically create purchase requisition with Item Category U – Stock Transfer.
Such purchase requisition will be then converted to P.O. Then standard MM process will follow meaning on supplying plant side Delivery & Goods Issue will take place. And on receiving plant side Goods Receipt against P.O.
Can you please let me know whether there is standard process which covers what was described above especially part on Plant Maintenance side?
If there is no standard process can you please advise (propose some best practices) how we can realized such request?
Many thanks in advance.
Grzegorz

Grzegorz
From memory, with intercompany trading you need to create a PO/PR on Company A and a corresponding Sales Order on Company B.
This can be automated via MM
I would suggest you ask the question in the MM Forum..
PeteA

Sales organization structure changes in COPA

Hi All,
My client like to change Sales organization structure like Distribution channel,division,sales office,sales group etc. and profit centers in sales orders.
from 01/01/2011 we like to post all open sales order's settlments to new sales organization,distribution channel,division,sales office,sales group and profit centers in COPA.
What is the best way to achieve this?
Any help is appreciated.....
Thanks,
Anusha

Hi,
I think COPA realignment should work for you.
If you can establish the exact relation ship between old Sales org structure to new Sales org structure, you can design your realignment in such a way that the new sales data will reflect the new structure.
For this,
1.You need to select the sales documents for which you want to change the sales org.
2. If you want to derive them again, you can do so
3. If you want the sales org structure elements to be replaced by new ones, you can do so.
Following a realignment, only the new assignment is known in the information system and in planning. The characteristic values valid at the time the original posting was made can only be analyzed in line item reports. Because the existing profitability segments are changed to adhere to the new assignment, all objects assigned to those profitability segments - such as sales orders or projects - and all existing SAP documents - such as billing documents or FI documents - reflect the new assignment as well.
For more details, check the following link. [http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c48c64a0111d1894c0000e829fbbd/frameset.htm]
Njloy
Siva

Corresponding Sales Organization of a project, starting from table COVP.

Similar Messages

Maybe you are looking for