Corrupt Volume - Missing Threads

Hi all,twice in the last three weeks I have had a notification from DrivePulse that my boot drive is corrupted and needs to be repaired. The problem has been the same on both occasions in that the volume directory count was reported as being invalid by a count of three (this time it was "It should be 232155 instead of 232158"). What can cause this? After repairing the drive I also verified the permissions on the drive and while they were reported as being OK I was also shown this message "Warning: SUID File "System/Library/Core Services/Remote Management/ARDagent" has been modified and will not be repaired", what the heck does that mean

Hi macjack, the errors are still appearing with the last one at 17:52 yesterday. When the drive is repaired by Disc Utility it looks in lost and found for the missing thread(s) and inside the folder for the last occurrence is another folder titled D17196.lck.
This is the console log for 17:52, can you see what is creating these errors from this.
19/10/2010 17:52:01 kernel PAE enabled
19/10/2010 17:52:01 kernel 64 bit mode enabled
19/10/2010 17:52:01 kernel Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
19/10/2010 17:52:01 kernel vmpagebootstrap: 1482883 free pages and 89981 wired pages
19/10/2010 17:52:01 kernel standard timeslicing quantum is 10000 us
19/10/2010 17:52:01 kernel migtable_maxdispl = 73
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=1 LocalApicId=16 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=3 LocalApicId=18 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=4 LocalApicId=4 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=5 LocalApicId=20 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=6 LocalApicId=6 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=7 LocalApicId=22 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=8 LocalApicId=1 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=9 LocalApicId=17 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=10 LocalApicId=3 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=11 LocalApicId=19 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=12 LocalApicId=5 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=13 LocalApicId=21 Disabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=14 LocalApicId=7 Enabled
19/10/2010 17:52:01 kernel AppleACPICPU: ProcessorId=15 LocalApicId=23 Disabled
19/10/2010 17:52:01 kernel calling mpopolicyinit for TMSafetyNet
19/10/2010 17:52:01 kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
19/10/2010 17:52:01 kernel calling mpopolicyinit for Quarantine
19/10/2010 17:52:01 kernel Security policy loaded: Quarantine policy (Quarantine)
19/10/2010 17:52:01 kernel calling mpopolicyinit for Sandbox
19/10/2010 17:52:01 kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
19/10/2010 17:52:01 kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
19/10/2010 17:52:01 kernel The Regents of the University of California. All rights reserved.
19/10/2010 17:52:01 kernel MAC Framework successfully initialized
19/10/2010 17:52:01 kernel using 16384 buffer headers and 4096 cluster IO buffer headers
19/10/2010 17:52:01 kernel IOAPIC: Version 0x20 Vectors 64:87
19/10/2010 17:52:01 kernel ACPI: System State [S0 S3 S4 S5] (S3)
19/10/2010 17:52:01 kernel AppleIntelCPUPowerManagement: Turbo Ratios 1112
19/10/2010 17:52:01 kernel AppleIntelCPUPowerManagement: initialization complete
19/10/2010 17:52:01 kernel mbinit: done (64 MB memory set for mbuf pool)
19/10/2010 17:52:01 kernel rooting via boot-uuid from /chosen: 11921756-9CD2-3BB2-B609-1B401393D2F2
19/10/2010 17:52:01 kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
19/10/2010 17:52:01 kernel com.apple.AppleFSCompressionTypeZlib kmod start
19/10/2010 17:52:01 kernel com.apple.AppleFSCompressionTypeZlib load succeeded
19/10/2010 17:52:01 kernel AppleIntelCPUPowerManagementClient: ready
19/10/2010 17:52:01 kernel Intel82574L::start - Built May 4 2010 10:31:05 -- running on device at b9d0f0
19/10/2010 17:52:01 kernel Intel82574L::start - Built May 4 2010 10:31:05 -- running on device at b10d0f0
19/10/2010 17:52:01 kernel wl0: Broadcom BCM432b 802.11 Wireless Controller
19/10/2010 17:52:01 kernel 5.10.91.27
19/10/2010 17:52:01 kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/WDC WD6400AAKS-41H2B0 Media/IOGUIDPartitionScheme/Macintosh HD@2
19/10/2010 17:52:01 kernel BSD root: disk1s2, major 14, minor 7
19/10/2010 17:52:01 kernel FireWire (OHCI) TI ID 823f built-in now active, GUID 0023dffffedd72a2; max speed s800.
19/10/2010 17:51:57 com.apple.launchd[1] * launchd[1] has started up. *
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key for dictionary: cccTaskDict
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key for dictionary: cccTimingDict
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key for integer: cccVersion
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key for string: cccTaskUUID
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key: cccTaskUUID
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown value type '5' for key: cccNextFireDate
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key for string: cccTaskName
19/10/2010 17:52:01 com.apple.launchd[1] (com.bombich.ccc.scheduledtask.86016793-00E5-4520-A2A5-8C43BAE1E321) Unknown key: cccTaskName
19/10/2010 17:52:01 mDNSResponder[18] mDNSResponder mDNSResponder-214.3.2 (May 14 2010 15:29:49) starting
19/10/2010 17:52:01 com.apple.SecurityServer[27] Session 0x5fbff962 created
19/10/2010 17:52:02 kernel Intel82574L: Ethernet address 00:25:00:ee:30:1a
19/10/2010 17:52:02 kernel Intel82574L: Ethernet address 00:25:00:ed:a4:aa
19/10/2010 17:52:02 kernel AirPort_Brcm43xx: Ethernet address 00:25:4b:92:99:77
19/10/2010 17:52:02 kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
19/10/2010 17:52:02 kernel systemShutdown false
19/10/2010 17:52:02 kernel AirPort: Link Down on en2. Reason 8 (Disassociated because station leaving).
19/10/2010 17:52:02 configd[14] arpclienttransmit(en2) failed, Network is down (50)
19/10/2010 17:52:03 kernel Previous Shutdown Cause: 5
19/10/2010 17:52:03 kernel DSMOS has arrived
19/10/2010 17:52:03 kernel ** Device in slot: SLOT-2 **
19/10/2010 17:52:05 com.apple.SecurityServer[27] Entering service
19/10/2010 17:52:05 configd[14] network configuration changed.
19/10/2010 17:52:05 configd[14] setting hostname to "chriss-mac-pro-2.local"
19/10/2010 17:52:05 configd[14] network configuration changed.
19/10/2010 17:52:05 configd[14] network configuration changed.
19/10/2010 17:52:06 kernel AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA
19/10/2010 17:52:06 kernel en2: 802.11d country code set to 'US'.
19/10/2010 17:52:06 kernel en2: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
19/10/2010 17:52:06 kernel Ethernet [Intel82574L]: Link up on en1, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af08,0de1,0200,cde1,3c00]
19/10/2010 17:52:08 kernel en0 Link down
19/10/2010 17:52:08 kernel Auth result for: 00:1f:5b:88:a6:80 MAC AUTH succeeded
19/10/2010 17:52:08 kernel AirPort: Link Up on en2
19/10/2010 17:52:08 kernel AirPort: RSN handshake complete on en2
19/10/2010 17:52:10 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:10 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:10 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:10 kernel en2 duplicate IP address 10.0.1.2 sent from address 00:25:00:ed:a4:aa
19/10/2010 17:52:11 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:11 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:11 com.vmware.launchd.vmware[80] VMware Fusion 261058: Starting VMware Fusion:
19/10/2010 17:52:11 VMware Fusion 261058[85] Starting VMware Fusion:
19/10/2010 17:52:12 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:12 bootlog[76] BOOT_TIME: 1287503517 0
19/10/2010 17:52:14 kernel rtinit: wrong ifa (0xba1ee58) was (0xba1eee0)
19/10/2010 17:52:14 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:14 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:14 kernel en2 duplicate IP address 10.0.1.2 sent from address 00:25:00:ed:a4:aa
19/10/2010 17:52:14 configd[14] network configuration changed.
19/10/2010 17:52:15 kernel en1 duplicate IP address 10.0.1.2 sent from address 00:25:4b:92:99:77
19/10/2010 17:52:15 com.apple.usbmuxd[58] usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
19/10/2010 17:52:18 mDNSResponder[18] SIGHUP: Purge cache
19/10/2010 17:52:19 blued[17] Apple Bluetooth daemon started
19/10/2010 17:52:19 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[65] Login Window Application Started
19/10/2010 17:52:19 com.apple.SystemStarter[59] Starting ProTec6 Server
19/10/2010 17:52:19 com.apple.SystemStarter[59] Starting Qmaster services
19/10/2010 17:52:19 fseventsd[69] checkvol_last_modtime:XXX failed to get mount time (45; &mount_time == 0x10057f8b8)
19/10/2010 17:52:20 fseventsd[69] log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: 63AC4410-36B4-4D00-81C1-EDC1DDACF1DC
19/10/2010 17:52:20 com.vmware.launchd.vmware[80] chown: /Library/Application Support/VMware Fusion/Uninstall VMware Fusion.app/Contents/Resources/French.lproj/MainMenu.nib/classes.nib: No such file or directory
19/10/2010 17:52:20 vmnet-bridge[212] UUID: Unable to open /dev/mem: No such file or directory
19/10/2010 17:52:20 com.vmware.launchd.vmware[80] Failed to initialize
19/10/2010 17:52:20 vmnet-bridge[212] Dynamic store changed
19/10/2010 17:52:20 vmnet-bridge[212] Started bridge for 0, en2
19/10/2010 17:52:20 kernel Warning - kext com.vmware.kext.vmx86 has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
19/10/2010 17:52:20 kernel vmmon: Loaded @ 0x9472415c: Info 0x94731d20 Name com.vmware.kext.vmx86 Version 3.0.0 build-261058 at May 21 2010 02:42:48
19/10/2010 17:52:20 kernel vmmon: Service start
19/10/2010 17:52:20 kernel vmmon: Instrumenting bug 151304...
19/10/2010 17:52:20 kernel vmmon: Initial HV check: anyNotCapable=0 vamnmoyUnn:lo cFkaesdt= 0c laoncykE ntahbrleeadd= 1s taanrytDeids.a
19/10/2010 17:52:20 kernel bled=0
19/10/2010 17:52:20 kernel vmmon: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
19/10/2010 17:52:20 kernel vmmon: Cycles 74
19/10/2010 17:52:20 kernel vmmon: Module initialized.
19/10/2010 17:52:20 kernel vmmon: Registering for power state changes
19/10/2010 17:52:20 kernel vmci: Loaded @ 0x8462a15c: Info 0x84633f80 Name com.vmware.kext.vmci Version 3.0.0 build-261058 at May 21 2010 02:42:49
19/10/2010 17:52:20 kernel vmci: Initializing module.
19/10/2010 17:52:20 kernel vmci: VMCI: Driver initialized.
19/10/2010 17:52:20 kernel vmci: Module initialized.
19/10/2010 17:52:20 kernel vmioplug: Loaded @ 0x8462015c: Info 0x846246c0 Name com.vmware.kext.vmioplug Version 3.0.0 build-261058 at May 21 2010 02:42:51
19/10/2010 17:52:20 kernel vmnet: Loaded @ 0x846aa15c: Info 0x846b27c0 Name com.vmware.kext.vmnet Version 3.0.0 build-261058 at May 21 2010 02:42:50
19/10/2010 17:52:20 kernel vmnet: Initializing module.
19/10/2010 17:52:20 kernel vmnet: VMNet_Start allocated gOSMallocTag.
19/10/2010 17:52:20 kernel vmnet: VMNet_Start allocated vnetBigLock.
19/10/2010 17:52:20 kernel vmnet: VMNet_Start allocated vnetPeerLock.
19/10/2010 17:52:20 kernel vmnet: Module initialized.
19/10/2010 17:52:20 kernel vmnet: VNetUserIf_Create: created userIf at 0xcdd8200.
19/10/2010 17:52:20 kernel vmnet: VMNetConnect: returning port 0xcdd8200
19/10/2010 17:52:20 kernel vmnet: Hub 0 does not exist, allocating memory.
19/10/2010 17:52:20 kernel vmnet: Allocated hub 0xcdc1000 for hubNum 0.
19/10/2010 17:52:20 kernel vmnet: Setting peer info for hub: 0, port: 0, rcv: TRUE, flags: 64
19/10/2010 17:52:20 kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:f2:4b:d0
19/10/2010 17:52:20 kernel vmnet: Hub 0
19/10/2010 17:52:20 kernel vmnet: Port 0
19/10/2010 17:52:20 kernel vmnet: bridge-en2: media 80 dev 0xbcf9204 family 2
19/10/2010 17:52:20 kernel vmnet: bridge-en2: wireless interface detected.
19/10/2010 17:52:20 kernel vmnet: bridge-en2: up
19/10/2010 17:52:20 kernel vmnet: bridge-en2: attached
19/10/2010 17:52:20 kernel vmnet: Invalidating peer info for hub: 0, port: 0
19/10/2010 17:52:20 kernel vmnet: VNetUserIfFree: freeing userIf at 0xcdd8200.
19/10/2010 17:52:20 com.apple.launchd[1] (com.vmware.launchd.vmware[80]) Exited with exit code: 1
19/10/2010 17:52:20 WindowServer[94] Unable to open IOHIDSystem (0xe00002bd)
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] &
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] 0�
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] @?
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] PX
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] �?
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] 0�
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] @?
19/10/2010 17:52:20 /System/Library/CoreServices/coreservicesd[51] PX
19/10/2010 17:52:21 /System/Library/CoreServices/coreservicesd[51] 0&
19/10/2010 17:52:21 /System/Library/CoreServices/coreservicesd[51] 0
19/10/2010 17:52:21 com.apple.SecurityServer[27] Session 0x234b96 created
19/10/2010 17:52:21 com.apple.SecurityServer[27] Session 0x234b96 attributes 0x30
19/10/2010 17:52:21 loginwindow[65] Login Window Started Security Agent
19/10/2010 17:52:21 SecurityAgent[231] User info context values set for CourtneyStones
19/10/2010 17:52:21 SecurityAgent[231] Login Window login proceeding
19/10/2010 17:52:21 SecurityAgent[231] Login Window done
19/10/2010 17:52:21 loginwindow[65] Login Window - Returned from Security Agent
19/10/2010 17:52:21 loginwindow[65] USER_PROCESS: 65 console
19/10/2010 17:52:21 kernel virtual bool IOHIDEventSystemUserClient::initWithTask(task*, void*, UInt32): Client task not privileged to open IOHIDSystem for mapping memory
19/10/2010 17:52:21 com.apple.launchd.peruser.501[232] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
19/10/2010 17:52:22 SystemUIServer[237] MenuCracker 2.0 (/Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuCracker.me nu)
See http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
19/10/2010 17:52:22 SystemUIServer[237] failed to instantiate and get the principal class of bundle: NSBundle </Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuCracker.me nu> (loaded)
19/10/2010 17:52:22 SystemUIServer[237] MenuCracker: Allowing "MenuMeterCPUExtra".
19/10/2010 17:52:22 SystemUIServer[237] MenuMeterCPU loaded.
19/10/2010 17:52:23 SystemUIServer[237] MenuCracker: Allowing "MenuMeterMemExtra".
19/10/2010 17:52:23 SystemUIServer[237] MenuMeterMem loaded.
19/10/2010 17:52:23 SystemUIServer[237] MenuCracker: Allowing "MenuMeterNetExtra".
19/10/2010 17:52:23 SystemUIServer[237] MenuMeterNet loaded.
19/10/2010 17:52:23 com.apple.launchd.peruser.501[232] (com.apple.Kerberos.renew.plist[255]) Exited with exit code: 1
19/10/2010 17:52:24 ClamXavSentry[280] All console output now going to /Users/CourtneyStones/Library/Logs/clamXav-scan.log
19/10/2010 17:52:24 Nikon Message Center 2[281] LaunchType changed: (Unknown) to User
19/10/2010 17:52:24 Nikon Message Center 2[281] LaunchType changed: User to LoginItems
19/10/2010 17:52:24 Nikon Message Center 2[281] launching
19/10/2010 17:52:24 Nikon Message Center 2[281] activated with launch type[LoginItems]
19/10/2010 17:52:24 Nikon Message Center 2[281] not past connection period
19/10/2010 17:52:25 Nikon Message Center 2[281] terminate
19/10/2010 17:52:25 MagicMenuHotKeyDaemon[283] Started
19/10/2010 17:52:25 [0x0-0x11011].com.stuffit.MagicMenu[270] 2010-10-19 17:52:25.195 MagicMenuHotKeyDaemon[283:903] Started
19/10/2010 17:52:25 ClamXavSentry[280] clamd not running. Now trying to launch it...
19/10/2010 17:52:25 VMware Fusion Helper[277] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Helper[277] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Helper[277] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Helper[277] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Start Menu[301] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Start Menu[301] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Start Menu[301] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:25 VMware Fusion Start Menu[301] Could not connect the action buttonPressed: to target of class NSApplication
19/10/2010 17:52:27 DGAgent[258] Resolved DG link from bookmark. /Applications/Drive Genius 3.app
19/10/2010 17:52:28 com.apple.launchd.peruser.501[232] (com.apple.pbs) Throttling respawn: Will start in 5 seconds
19/10/2010 17:52:30 ClamXavSentry[280] clamd launched successfully. Continuing...
19/10/2010 17:52:30 ClamXavSentry[280] scan email files
Thanks for your help.

Similar Messages

Xserve RAID volume corruption, volumes missing in Disk Utility

I have an Xserve with 3 drives in a RAID 5 set. The RAID set is divided into 2 volumes. After hard booting the server to recover from a crash, the volumes seemed to disappear.
We booted to an install disk and ran Disk Utility, which showed that there were no volumes at all. We then ran RAID Utility, which showed the volumes there.
After the RAID ran a re-initialization and verify, RAID Utility shows green lights throughout, as if everything is fine. Nothing else, however, can see the volumes.
We booted to an external drive with OS X installed, and basically found the same situation. Only RAID Utility can see those volumes, but otherwise they're just plain missing. However, RAID Utility does show "Partitions: None" for both of those volumes.
We have tried placing the drives into another server to determine if the problem is with the RAID card, but we had the same results. I also tried booting to target disk mode, but the other machine can't see the volumes all the same.
Using an external boot disk, we upgraded the RAID firmware. We also reset the SMC, as well as the PRAM. Nothing is working so far.
AppleCare basically told me that we're SOL and have to rebuild. Unfortunately, there is some data there which was overlooked in our backup procedure. If there is any possibility of recovering the data, I'd like to try it before giving up.
My absolute last option is to recreate the volumes exactly as they were before, then hope that I can use some manner of un-erase to recover the data. However, I'm not sure how RAID works on that level, should it just jumble the data, or if this is even remotely a feasible option.

Port 1: Link Established
2Gps
Point to point
Status light green
In the system Profiler I'm not sure what you're asking for, I'm running 10.5.8 standard not server.
the fibre channel shows link established 2Gps and cable type copper but nothing else, the disks & RAID controller don't show up anywhere I've looked.
RAID Admin shows the JBOD disks as online and lists the LUNs etc.
System looks fine, only error is missing second power supply.

Disk Utility and fsck report 'missing thread records' and can't repair.

Hello,
What first made me realise there was a problem with my iMac was that when I tried to update a application it failed. I then manually download the .dmg of the update and tried replaced the app (Transmission 1.82 being that app in question). This failed, OS X claiming that it could not replace the older version (1.81). I then tried copying the file to the desktop where OS X claimed that there was already a copy of the application and so left a corrupted file on my desktop. This also happened when i attempted to move and copy a couple of pages documents and movie files around. I decided the best thing to do at this point was to reboot my computer; OS X decided it needed to install a couple of security updates at this point. This installation failed.
My iMac booted up, but only after a progress bar has appeared under the Apple logo and spinner and has done its thing (From what I've read this means that OS X is trying its best to resolve some sort of errors). This happens upon every boot.
This made me think that something must be going on with the file system of my Mac so I ran all the tests in Disk Utility. Permissions repair ran fine and fixed a few issues, but when I verified the disk this is what it reported:
"Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 2045563)
Missing thread record (id = 2096282)
Keys out of order
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
I booted up from the DVD and tried to repair; this failed. Next I tried using fsck in single user mode; this also failed. Upon rebooting again and waiting for the progress bar to fill I was able to move files around and update Transmission without issue. Disk Utility still reports the same error.
If I boot into Windows Vista everything works perfectly; as of yet I haven't got around to installing the new Boot Camp update for Windows 7 support incase that changes anything. When running the diagnostic tool on the Windows Vista DVD it reports that everything is fine for Windows.
I really am at a loss for what to do next. All my data is backed up by Time Machine onto a Time Capsule as well as manually onto a FW external. I also made a clone of the Windows partition using the free app Winclone. Does anyone know anything I can do to fix this problem?
Thanks so much,
Sam.

I have been experiencing exactly the same problem here with my MacPro. Apple replaced the hard disk because it was reporting bad sectors. However even with the replacement hard disk I'm experiencing the "missing thread" issue again. I'm guessing its either a software issue that keeps recurring or a fundamental hardware issue. Is the disk controller part of the hard disk or the motherboard? I've never had hard disk problems like this before.
Here's my Disk Utility report from earlier today:
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 1067066)
Missing thread record (id = 1111528)
Missing thread record (id = 1196845)
Missing thread record (id = 1200621)
Missing thread record (id = 1260154)
Missing thread record (id = 1277166)
Missing thread record (id = 1285010)
Missing thread record (id = 1297257)
Missing thread record (id = 1316679)
Missing thread record (id = 1437800)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 155085 instead of 155095)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
Missing directory record (id = 1437800)
Missing directory record (id = 1316679)
Missing directory record (id = 1297257)
Missing directory record (id = 1285010)
Missing directory record (id = 1277166)
Missing directory record (id = 1260154)
Missing directory record (id = 1200621)
Missing directory record (id = 1196845)
Missing directory record (id = 1111528)
Missing directory record (id = 1067066)
Look for missing items in lost+found directory.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume directory count
(It should be 155106 instead of 155096)
Repairing volume.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume MacHD was repaired successfully.

Time machine restore: missing thread record

Hello everyone,
I recently upgraded from Lion to Mountain Lion. I did a clean install. I have been backing up with Time Machine to my Lacie Cloudbox NAS. My NAS requires authentication.
I am unable to restore my files. I have tried it during installation and with Migration Assistant. I can see my .sparsebundle through Finder and mount it (and see an inprogress with loads of folders inside of it). I am unable to copy the files directly to my desktop because of an permission warning.
From Windows I can see loads of files inside the bands-folder. They are all equal in size. I found a clue that maybe the most recent ones are corrupt, so I moved two days worth of them out from sparsebundle.
Disk utility says the drive needs to be repaired. I tried this, and got loads of errors. I there are so many of these that I have shortened the list below a lot. Please help me, all my valuable files are inside the .sparsebundle (510 gigs). I don't care about automation, I just want them out.
Verify and Repair volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 381217)
Missing thread record (id = 383288)
Missing thread record (id = 383627)
Missing thread record (id = 384165)
Missing thread record (id = 384442)
Indirect node 380893 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951259)
(It should be 0 instead of 1951258)
Indirect node 380895 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951262)
(It should be 0 instead of 1951261)
Indirect node 380897 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951265)
(It should be 0 instead of 1951264)
Indirect node 411674 needs link count adjustment
(It should be 1 instead of 3)
Orphaned file hard link (id = 1286100)
Orphaned file hard link (id = 1286101)
Orphaned file hard link (id = 1286119)
Orphaned file hard link (id = 1286120)
Orphaned file hard link (id = 1286121)
The volume Time Machine Backups could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

The backup disk image is corrupt. You might be able to repair it by holding down the option key and selecting Verify Backups from the Time Machine menu. But that may also result in a total loss of all backup data. Backing up to a third-party NAS is unsupported by Apple and unsafe. You should back up to a locally-attached storage device.

Verify disk missing threads repair failed?

I am sorry I do not know where to post this. I have just repaired my permissions and verified my hard disk the the result was as below:
2010-01-19 09:56:10 +0900: Disk Utility started.
2010-01-19 09:56:15 +0900: Repairing permissions for “Mackintosh HD”
2010-01-19 09:59:36 +0900: Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x .
2010-01-19 09:59:36 +0900: Repaired "usr/share/derby".
2010-01-19 09:59:56 +0900: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
2010-01-19 10:00:52 +0900:
2010-01-19 10:00:52 +0900: Permissions repair complete
2010-01-19 10:00:52 +0900:
2010-01-19 10:00:52 +0900:
2010-01-19 10:27:06 +0900: Verifying volume “Mackintosh HD”
2010-01-19 10:27:06 +0900: Starting verification tool:
2010-01-19 10:27:07 +0900: Performing live verification.
2010-01-19 10:27:07 +0900: Checking Journaled HFS Plus volume.
2010-01-19 10:27:07 +0900: Checking extents overflow file.
2010-01-19 10:27:59 +0900: Checking catalog file.
2010-01-19 10:27:59 +0900: Missing thread record (id = 623624)
2010-01-19 10:28:00 +0900: Missing thread record (id = 782860)
2010-01-19 10:28:00 +0900: Incorrect number of thread records
2010-01-19 10:28:00 +0900: Checking multi-linked files.
2010-01-19 10:28:00 +0900: Invalid volume file count
2010-01-19 10:28:00 +0900: (It should be 416768 instead of 416775)
2010-01-19 10:28:00 +0900: Checking extended attributes file.
2010-01-19 10:28:00 +0900: Checking volume bitmap.
2010-01-19 10:28:00 +0900: Checking volume information.
2010-01-19 10:28:00 +0900: The volume Mackintosh HD was found corrupt and needs to be repaired.
2010-01-19 10:28:00 +0900: Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.2010-01-19 10:28:00 +0900:
2010-01-19 10:28:00 +0900: Disk Utility stopped verifying “Mackintosh HD”: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
2010-01-19 10:28:00 +0900:
What should I do. Is my hard drive about to fail?? Any comments would be much appreciated

kiwao wrote:
Thanks for your input. The volume has been repaired successfully. How did this happen.
I don't know.
Is it software related.
this is very hard to say. it could be software related but it could be hardware related too.
How can I stop it happening again.
you can't really. verify your hard drive periodically. if this keeps happening you'll need to reformat the drive. if it keeps happening after that it's likely hardware related and you should replace the drive.
This has never happened on any of my other macs. Not on the G4 ibook I am using now nor the imacs I have had!
Thanks again

Missing Thread Record and Invalid Extent entry when booting

Hi all,
When I boot up my PowerBook G4 it freezes. When I boot into single user mode and run fsck -fy I get the following messages:
** /dev/rdisk0s3
** Root file system
** Checking HFS Plus volume
** Checking Extents Overflow file.
** Checking Catalog file.
Missing thread record (id = 72)
Invalid extent entry
(4, 14531)
** Volume check failed.
I do not have Disk Warrior nor the Apple disks with me. Any help you can provide is greatly appreciated. Navigating my disk in single user mode seems to have all my directories etc.
Thanks!

I am trying to back up my data now. I only have my FAT32 formated iPod with me and I'm trying to mount it to backup my photos before I reinstall. Unfortunately I do not see my iPod popping up in /dev at all so I cannot even mount it.
It's a USB connection so I suspect that single user mode doesn't pick it up... Any advice on how to mount a filesystem from my iPod in single user mode is much appreciated.
Thanks.

Second hard drive missing thread error

Hello, I've got a macbook pro with 10.8.5 running. I have had a second 1Gb hard drive installed in the optical bay and it's been running for a long time with no issue. I booted up today and noticed the drive would not show up in finder. I ran disk utilities and it said there was a sibling link error and it suggested I repair the disk using disk utility. I ran disk repair and a new error popped up during catalog file check: there are 5 missing thread record (id = xxxx) errors and two "Incorrect number of thread record errors". Then it says the volume could not be verified completely and ultimately ends with Error: Disk Utility can't repair this disk...disk, and restore your backed-up files. I noticed the volume name changed to disk1s2 and I can't mount it. Now I'm stuck. I looked at recommendations for more elaborate disk repair programs that can be purchased but I see so many negative recommendations on all of them I'm not compelled to purchase. I definitely need to recover the data on the drive so I am pretty disappointed at what disk utility seemed to do to the drive (it appears to me to be worse since the volume name is changed (before I ran disk utilities when I had the sibling error I saw that the volume name was correct) and I can't do anything with it.) I'm stuck and could use some good advice. This is not a boot drive just a data drive.
Also if anyone could say what this sibling error was and what the thread errors actually are that would be a bonus (I'm an old timer hardware engineer and just want to know )

Normally, those errors are WRT the disk's directory. You need something stronger, such as DiskWarrior, TechTools Pro, or Drive Genius. All of are reliable and should do the job. Disk Utility has many shortcomings and repairing disk directory errors is one of its biggest.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Bios is corrupt or missing (error 501)

I downloaded the newest version of the bios. Under system info, it identifies this newest bios as the bios. But the computer shuts down every 30 minutes or so. The computer shuts down. Then it restarts, on its own, and a message comes up, saying "The bios is corrupt or missing (error code 501)." I tried recovering the bios using a press key combination, but it doesn't work. I don't think the computer supports this function. I do have a HP_Tools volume. It has a folder "Hewlett Packard/Bios/Current" with files "68SAD" and "68SAD.sig". The "Previous" folder has the same files. The "New" folder is empty. I've always updated the Bios from the system drive, rather than from an external Flash drive. I don't know if this matters or not. I retried updating the Bios several times, thinking I did something wrong. The computer still keeps shutting down, on its own, while doing things. Then it restarts on its own with the "bios is corrupt or missing" message. I can't turn off the computer without it restarting on its own and coming up with that message. I'm desperate.

Hi @HP-salum
Thank You for your inquiry, I will do my best to assist you.
It is my understanding that when you turn on your notebook you are receiving the Bios application 501 is missing or corrupt.
You will need to restore your bios. Here is a link to assist you with that process. Restoring the BIOS
If you are unable to restore the bios using the Windows key plus B method, if you can access the bios by pressing F10 approximately once ever second after pressing the power button to start the notebook to enter the system configuration screen you can try restoring the defaults. There will be an option along the bottom of the screen.
If you are unable to install the HP_Tools on a USB key as instructed in the previous document you can go to the download page for your notebook and look for a bios update which you can download and install on the USB key to recovery your notebook.
Here is a link to Drivers & Downloads where you will need to input your exact model to display a list of software and drivers for your notebook. This is where you can look for a bios update for yours.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

What is a missing thread record (id = 3339624) and what can I do about it?

I was trying to updat my IMac to snow leopard and got an error during the process. I restarted my computer on the HD that I was trying to update and I get the boot screen and then it turns off. I then got it to boot on the SL disk and it got me to the repair prompt and the DU. When I verify the HD I get missing thread record (id = 3339624) and It grays out the HD. After restarting and getting back to the DU I can see it again and all my files on it. I no longer care about updating I just want to be back to normal. I don't have any time machean backups and I am very worried. It makes it even worse being able to see my files but not be able to get to them.

That error message means that Disk Utility can't reconcile the catalog entry for a file and it's location on the hard drive. That could mean a problem with the file or a problem with the catalog.
Verifying the hard drive doesn't fix anything, it just reports it's status. You need to boot to either your Leopard or Snow Leopard DVD, bring up Disk Utility, and repair the hard drive. If Disk Utility gives a failure on exit message or tells you it can't repair the hard drive, then you'll need to use a program like Disk Warrior or TechTool Pro, with Disk Warrior being the program most people use. That should be able to fix the problem. Disk Warrior is available from http://www.alsoft.com/diskwarrior/
If you started a major operating system upgrade without having a backup, you're setting yourself up for failure should a problem arise, but you probably know that by now.

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Satellite P205D-S7802: CD/DVD drive issue; driver corrupted or missing

Hi,
Dvd unit has not recognized by the OS.
When i open My Computer the only unit displayed is C, there's no D unit.
Then I go to device manager to check it, and I notice that the DVD unit has problems, then i open properties and the error message is:
"HL-DT-ST DVD RAM GSAT20N ATA DEVICE
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing".
First i thought that was a hardware problem, but I introduced the windows vista disc at boot and the unit read it very well. Then I choose update driver from device manager and the updater told me that the best driver was already installed for the device.
I tried to replace the .sys and .info files for cd-roms but nothing happened either.
What is happening, please help, is urgent i need to use my dvd unit.
Regards.

Try this:
remove the CD/DVD drive from the device manager list
access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
This is described also here in the MS knowledge base article:
http://support.microsoft.com/kb/270008/en-us
Check it out!

Windows To Go windows/system32/Winload.exe corrupt or missing

I have a windows to go hard drive and an error came up recently saying "windows/system32/winload.exe corrupt or missing". I made a recovery drive from normal windows 8 but it cant detect the windows to go hard drive (I think its because its only
looking to internal hard drives). any help would be appreciated. thanks
EDIT:: it should say winload in the title

Hi!
My name is Long.
I've got the same issue like you and resolved that without repartition and reinstall window to to.
I will so you step by step what i did to resolve the error with winload.exe corrupt or missing. I hove that will help you resolve your problem too.
As you known: Window to go run in a external harddrive with 2 partitions. The first Partition have 350 MB (FAT32, active partition and it contain boot files). The second partition have remaining space (contain window files).
The first you need a computer have a working window 7 or 8 OS(recommend window 8 or highter)
Plug your window to go hard drive to the window.
Assign the first partition 350 MB by disk manager with letter Z: (normally the fist partition 350 MB is not mounted)
Assign the second (contain windows files) with letter O:
Delete all file in the partition Z:
Open CMD and do the command.
O:\windows\system32\bcdboot O:\windows /f ALL /s Z:
Restart and boot to window to go.
If you want to know why i did that, read below:
(External Hard Drive = EHD)
i found a lot of the suggests in the internet and did that.
- I had try to replace the winload.exe file in the second partition but it not effect.
- I replace the registry data in folder \windows\system32\config but it not effect.
- I did some commands found in the internet but not effect too. (https://social.technet.microsoft.com/Forums/windows/en-US/1b2045b9-7fef-47f0-aea3-1e185fb7544c/fix-winloadexe-is-missing-or-corrupt-no-its-not)
- System repair not work with EHD.
After i did all the ways found in the internet, i think that, the problem is not due to winload.exe file.
I read the tips to install window togo again and i try to reinstall the window to go without repartition.
The install have 2 steps:
- 1: Partition and set active.
- 2: Copy file and make boot
I ignor the first step because my EHD have got 2 partitons like the tips.
I delete all file and folder relate to window except my pertional data (in the 2nd partition).
I extract install.wim file and copy all to the 2nd partition. I restart and boot to EHD but it still got error.
I'm used Bootice and check the MBR of EHD and i got unknown MBR. I think the the problem.
So I used Bootice software, set MBR of EHD = Windows NT 6.x. and I
Set PBR to 2 partitions are BOOTMGR boot record (FAT32/NTFS/ExFAT). I restart and boot to EHD but it still got error.
Next, I delete all file in 1st partition of EHD.
I Open CMD and do the command
"o:\windows\system32\bcdboot o:\windows /f ALL /s z:"
after that, i restart and boot to EHD and it worked. The window to go work perfect but i lost all settings :)
So i think the 2nd partition and all files is ok. The problem is by the 1st partition.

Windows 2012 Domain Controller: Failed to open the runspace pool. The Server Manager WinRM plug-in might be corrupted or missing

Hi all,
We have been battling a problem for the last couple of days when we try to add the first windows server 2012 DC to an already existing Domain.
The Server installation goes smoothly and we can add the computer to the domain and its all green.
After we promote the server to a domain controller the WinRM service starts acting up (not responding anymore).
The server manager console shows Remote Management as disabled, and when we try to enable it via the console or Powershell it freezes up.
The AD DS part of the console is saying that there are post-promotion tasks that need to be completed but once we click on the task it takes us to the promotion wizard again, that basically complains that: Failed to open the runspace pool. The Server Manager
WinRM plug-in might be corrupted or missing.
In the Remote Management Event log we see the following entry: "The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)" Event ID 138
We are unable to do anything with the server (demote, add roles, remotely manage...). We tryed the following already:
1. Recreate from scratch
2. Checking the GPOs to see if there is anything setup about RM -> came up with nothing
We just ran out of ideas so HELP PLEASE !
BR
Tomaz Praprotnik

Hi Cicely,
Yes the error from the Windows Remote Management event log contains (I took out the User and FQDN of the Computer):
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:38:53 PM
Event ID:      138
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>138</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:38:53.786357100Z" />
    <EventRecordID>6876</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0003-D261-FD18382BCE01}" />
    <Execution ProcessID="1084" ThreadID="2924" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
</EventData>
</Event>
There is also another entry that sometimes comes up:
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:36:34 PM
Event ID:      142
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
WSMan operation Invoke failed, error code 2150859046
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>142</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>2</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:36:34.076973400Z" />
    <EventRecordID>6869</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0001-F328-FD18382BCE01}" />
    <Execution ProcessID="4888" ThreadID="4392" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
    <Data Name="operationName">Invoke</Data>
    <Data Name="errorCode">2150859046</Data>
</EventData>
</Event>
Best regards
Tomaz Praprotnik

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error Cab1 file is corrupt or missing in Reader 8.1

I've tried installing Reader 8.1 on two different machines and keep getting the same error message about the Cab1 file being corrupt or missing.
Its not missing but it is most definitely corrupted. Ive DL'd the darn thing 5 different times, all with the same results. It worked a few weeks ago on a very old Compaq (300MHz PII, 176MB RAM, Windows 2000 SP4). Now this week it wont install on a Gateway (900MHz AMD Athlon, 512 MB RAM, WinXP Pro SP2) or a Dell (1.5 GHz P4, 1GB RAM, WinXP Pro SP2). Doesn't make any sense to me.

Ok. I located the folder in the folders panel and found it was in red, not white. I clicked on it and went to library but the synchronize option was grayed out so I'm kind of stuck at this point. Thanks for your help.

Corrupt Volume - Missing Threads

Similar Messages

Maybe you are looking for