Error Cab1 file is corrupt or missing in Reader 8.1

I've tried installing Reader 8.1 on two different machines and keep getting the same error message about the Cab1 file being corrupt or missing.
Its not missing but it is most definitely corrupted. Ive DL'd the darn thing 5 different times, all with the same results. It worked a few weeks ago on a very old Compaq (300MHz PII, 176MB RAM, Windows 2000 SP4). Now this week it wont install on a Gateway (900MHz AMD Athlon, 512 MB RAM, WinXP Pro SP2) or a Dell (1.5 GHz P4, 1GB RAM, WinXP Pro SP2). Doesn't make any sense to me.

Ok. I located the folder in the folders panel and found it was in red, not white. I clicked on it and went to library but the synchronize option was grayed out so I'm kind of stuck at this point. Thanks for your help.

Similar Messages

  • Protected View Error "The file is corrupt and cannot be opened"

    All 
    I have a problem with Protected View in Office 2010 on Windows 7.
    Symptom:  When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened.  This
    is impacting both Word and Excel.  I haven’t tested other applications.  The user gets the error "The file is corrupt and cannot be opened.".
    Expected behaviour:  Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
    Troubleshooting Results:
     -      If I turn off Protected View the error goes away and the documents open without
    issue (but not in Protected View obviously)
    -      If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
    -      If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
    -      If I repair Office the problem is NOT fixed
    -      If I reinstall Office the problem is NOT fixed
    The problem doesn't impact all machines, but any new machine I build suffers the problem.  All Protected View options are set by group policy and all machines are getting the correct settings.
    -       The setting “Enable Protected View for files originating from the Internet” is enabled
    -       The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
    -      The setting “Enable Protected View for Outlook attachments” is enabled
    -      Enable Data Execution Prevention mode is enabled
    Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause?  There are lots of postings on this around the various Internet forums, but most
    just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
    Thanks.
    James.

    Thanks for coming back, James, and I'm glad you've found the source of your
    problem.
    As an aside, I had no idea HP made software like that and will take a look
    at it - or would if I could. Personally, although I love their hardware, I
    wouldn't touch HP software, and the fact that their web page doesn't load
    (in IE8) just reinforces my feeling.
    Enjoy,
    Tony
    www.WordArticles.com
    "jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
    > Will, thanks for taking the time to post some suggestions. I understand
    > Protected View perfectly well and my post is because Protected View is not
    > behaving as it should. I think my dot points above show this, still,
    > thanks for taking the time to post. I think Tony is more on track with
    > his questions around what has changed in my build, and this is the area
    > I've focused on over the few days since posting.
    >
    > I've pulled my build apart and put it back together and found the issue.
    > This was tedious to say the least, but turned out worthwhile. A program
    > we used called Trim Context Desktop
    > (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
    > is part of our SOE. This is a records management tool, but we only use a
    > small feature set, and all the Office integration options that can be
    > configured during install are turned off, but it turns out that the
    > application still impacts Office. If I uninstall the Trim client from our
    > SOE, Office Protected View starts working as expected. We knew the full
    > Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
    > we didn't use the Office integration features we were OK. All our testing
    > was around the application and it works fine, I just didn't connect it to
    > the Office issues until systematically eliminating changes from the SOE
    > build. Keep a log of your changes!!! It helped me reverse things until I
    > found the problem.
    >
    > Uninstalling Trim also fixes and issue I had in Outlook where the
    > previewers wouldn't display Office documents, reporting that the
    > previewers were not installed.
    >
    > We will go to HP to get some support and advice around this before putting
    > Trim back in to the SOE.
    >
    > Anyone - if you have similar problems, can I suggest you look at all your
    > Office add-ins and also any applications that may potentially hook in to
    > Office.
    >
    > Cheers all.
    >
    > James.
    >
    >
    >
    Enjoy,
    Tony
    www.WordArticles.com

  • Outlook 2010 error - The file is corrupt and cannot be opened

    Hi experts
    Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
    I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
    the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
    Thanks

    Hi,
    You can try using the Fix it tool in the following KB article to fix the issue:
    http://support.microsoft.com/en-us/kb/2387587
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I get error message file is corrupt for firefox 3.6

    every time i try to download firefox 3.6 i get to extraction and i get an error message "file is corrupt." i do not like using the firefox beta version. can you try to help me figure out why i can not download or install or use 3.6. or can you come up with a newer version that is not beta whatsoever. i loved EVERTYHING about 3.6 until it stopped working on my laptop. i've even tried installing it on my desktop and i get the same error message. is it just the 3.6 version or is it something i'm doing wrong. please help me fix this.

    You will need to create a new profile if you didn't create one for the 4.0 beta version.
    See:
    http://kb.mozillazine.org/Profile_Manager
    [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
    See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

    Can anyone help me with this problem.  I tried updating the latest itunes and it caused an error MSVCR80.dll missing.  I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that.  I did that but now get the error "the  files "itunes library.itl" cannot be read because it was created with a newer version of itunes.  I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions.  Can anyone please go through step by step (letting  me know where I can find what is needed) to enable me to be able tio log into itues again.  Thanks

    Hi pussygalore,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
    Regards,
    - Brenden

  • Cant open itunes due to error "the file itunes library.itl cannot be read becaues it was created by a newer version of itunes."

    Can't open itunes due to error "the file itunes library.itl cannot be read because it was created by a newer version of itunes."

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Httpd error log file appears to be missing

    I'm having a somewhat frustrating and seemingly elementary problem with the Server, as freshly installed. I did drag a Web Config.plist to restore the web settings from another server, and I have a feeling that this action might have caused a hiccup where the web server won't start. My symptoms are as follows:
    with no sites in the Sites list, when I click Start Service for Web Service, I get a dialog:
    A service has encourntered an error. / Try to refresh the view (server.address.here/Web). Report the problem to the administrator if it persists. (could not start web service - details in error log).
    Now here's what's frustrating... I can't find an httpd error log. the folder /var/log/httpd/ is where I would expect this log to be, but this folder is empty. There's an Apple KB article that says the httpd error log file should be at /var/log/httpd/ ( you can check it out at http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c5ws4.html ), but no such log file exists. (I verified with terminal and also looked with Console: saw no log entries under the httpd line [there is a disclose triangle that discloses no lines] )
    On a whim, I thought maybe the /var/log/httpd folder didn't have the right permissions, so I increased my permissions on this older form 0755 to 0757, so that it now reads:
    drwxr-xrwx 2 root wheel 68 Mar 27 2005 httpdd
    ... but upon retesting the Start Service button under Web service, I get the same error and can find no log file.
    Like I said, this is a freshly installed copy of OS X 10.4 Server (I have not even upgraded to Server 10.4.10, should I ?) and all I did was an Open Directory configuration (which works), and then dragged a Web Config.plist onto Server Admin to restore saved settings from another machine...
    any thoughts on what I should try next?
    Thanks, any advice is appreciated.

    Recently updated Developer preview and WebObjects. After trying
    sudo apachectl configtest
    this checks apache configuration sintax.
    If nothing fails try to start apache (sudo apachectl graceful)
    and take a look at system.log.
    discovered that /System/Library/WebObjects/Adaptors/Apache/apache.conf no longer existed.
    As root renamed apache.conf.old as apache.conf and restarted. Life is good again.
    Your mileage may vary.

  • ITunesSetup says some install files are corrupt, iPod wont be read by pc..

    My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

    djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
    2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
    3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
    4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
    Thank you for your quick response.
    1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
    2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
    3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
    4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

  • Error The file iTunes Library.itl cannot be read......help

    I still can not open iTunes, and I keep getting an error message that tells me that the file iTunes Library.itl cannot be read because it was created by a newer version of itunes. I am currently using version 7.5.0.20
    Thanks in advance for any of your helpful ideas!
    Jody

    I have declined many of the updates, as they take so long to download on dial up...(yup, I live in the sticks!)....I am still running version 7.5.0.20 but cannot open iTunes at all and receive the error I posted earlier, and am wondering if updating to version 8 will rid me of the error, or make things worse?
    I did a system restore a few weeks ago and am wondering if that affected my iTunes at all....just a thought. Still need to hear your ideas to fix my problem.
    Jody

  • Error "The file "iTunes Library.itl" cannot be read

    iTunes was uninstalled from my computer and I need to reinstall it. I tried to download 7.3.2 but it says I already have iTunes on my computer. When I try to open iTunes I get this error message:
    "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes."
    What does this mean?

    It means you had a newer version of iTunes installed previously, such as v7.6.
    Why did you download 7.3 and not 7.6?

  • Error Message: file is empty or cannot be read

    Hi there
    I am using a Sony Xperia to send files to an hp printer.  When I send pdf files that have been stored on my computer there are no issues.  But when I use the "share with" feature, I often get the "file is empty or cannot be read" error message.  Suggestions?

    Jumping a little late into this thread..
    I am using my dual-boot HP TouchPad with Android ICS installed.  HP ePrint Home & Biz is installed from the Play Store.
    I have been attempting to print web pages, or emails and get the same error message each time.  Tried different email clients, and web browsers - "sharing" to the ePrint app produces the "File is empty or cannot be read" error.  I have uninstalled/reinstalled the app.
    The ePrint app can print PDF files, photos, and office files to my 8600 Premium Pro printer.
    Is the app limited to the above files?  I mainly need it to print emails and web pages.  The "share to email" does work, thankfully!
    <WyreNut raises hand to volunteer for any Beta testing of the Android version...>    
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I downloaded Firefox. When I clicked on "Run" for the set-up wizard, I received an error message "File is Corrupt".

    That's all the details I have!

    You will need to create a new profile if you didn't create one for the 4.0 beta version.
    See:
    http://kb.mozillazine.org/Profile_Manager
    [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • File is corrupted error while creating excel using xml

      Hi have created one excel file using XML code and sent it to mail as attachement. But when i open it, it displays error  message - file is corrupted and cannot be opened.
    below is my code - please review and tell what is wrong in it ASAP :
    * Creating a ixml Factory
       l_ixml = cl_ixml=>create( ).
    * Creating the DOM Object Model
       l_document = l_ixml->create_document( ).
    * Create Root Node 'Workbook'
       l_element_root  = l_document->create_simple_element( name = 'Workbook'  parent = l_document ).
       l_element_root->set_attribute( name = 'xmlns'  value = 'urn:schemas-microsoft-com:office:spreadsheet' ).
       ns_attribute = l_document->create_namespace_decl( name = 'ss'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:spreadsheet' ).
       l_element_root->set_attribute_node( ns_attribute ).
       ns_attribute = l_document->create_namespace_decl( name = 'x'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:excel' ).
       l_element_root->set_attribute_node( ns_attribute ).
    * Create node for document properties.
       r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT'  parent = l_element_root ).
       l_value = sy-uname.
       l_document->create_simple_element( name = 'Author'  value = l_value  parent = r_element_properties  ).
    * Styles
       r_styles = l_document->create_simple_element( name = 'Styles'  parent = l_element_root  ).
    * Style for Header
       r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Header' ).
       r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).
       r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#92D050' ).
       r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).
       r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Center' ).
       r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
    * Style for Data
       r_style1  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style1->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Data' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style1 ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
    * Worksheet
       r_worksheet = l_document->create_simple_element( name = 'Worksheet'  parent = l_element_root ).
       r_worksheet->set_attribute_ns( name = 'Name'  prefix = 'ss'  value = 'Sheet1' ).
    *  r_worksheet->set_attribute_ns( name = 'Protected'  prefix = 'ss'  value = '1' ).    " WORKING
    * Table
       r_table = l_document->create_simple_element( name = 'Table'  parent = r_worksheet ).
       r_table->set_attribute_ns( name = 'FullColumns'  prefix = 'x'  value = '1' ).
       r_table->set_attribute_ns( name = 'FullRows'     prefix = 'x'  value = '1' ).
    * Column Formatting
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '40' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '140' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '150' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
    * Blank Row
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    * Column Headers Row
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
       r_row->set_attribute_ns( name = 'AutoFitHeight'  prefix = 'ss'  value = '1' ).
    * RFQ No.
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ No.'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * RFQ Line Item No
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Line Item No.'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Material
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Material'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Quantity
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Quantity'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  Order UNIT
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Order Unit'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  Delivery Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Delivery Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  RFQ Creation Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Creation Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  RFQ Deadline Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Deadline Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Price
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Net Price'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    ** Login
    *  r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
    *  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
    *  CONCATENATE 'Login - ' lv_date+6(2) '/' lv_date+4(2) '/' lv_date+0(4) INTO l_value.
    *  r_data = l_document->create_simple_element( name = 'Data'  value = l_value  parent = r_cell ).
    *  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Blank Row after Column Headers
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
    * Data Table
       LOOP AT it_final1 INTO wa_final1.
         CLEAR l_value.
         r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    * RFQ No.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         CLEAR l_value.
         l_value = wa_final1-ebeln .
    *    CONDENSE l_value NO-GAPS.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value  parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    * Line Item No
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-ebelp.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    * Material
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-txz01.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    * RFQ QTY
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-ktmng.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    * UNIT
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-meins.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell

    How to make a particular column non editable?
    Make your style protected and pass that style name to your required column while passing data.
    for example:
    Find below the code for protection of a style.
    Last two lines are very important.
    * Style for Headert
       r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Headert' ).
       r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).
       r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#B2FF64' ).      
       r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).
       r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Protection'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Protected'  prefix = 'ss'  value = '1' ).

  • "File is corrupt" error when trying to encode some videos

    Hello,
    We are using Azure Media Services to encode uploaded user videos and although most encode fine, a significant number fail.
    I saw a suggestion to check the file for errors using "Windows Media ASF View 9" and indeed, the files that do not encode have warnings about "Packet is flagged with multiple payload with payload count = 1". Would this be the reason the
    files are not encoding?
    The full error message is: "Task Id: nb:tid:UUID:ce02345d-1500-80c2-5557-f1e4d4404725; Error code: UserInput; Error message: File is corrupted."
    These files play fine in Windows Media Player, VLC, etc.
    I tried another 3rd party encoder and these files encode fine.
    Is there some way to get these files to encode successfully using Azure Media Services?
    Thanks for any advice or help!

    Thanks for reaching out. In addition to the task ID, can you please tell us which data center you are using?
    And if you can share a sample file, please send a SAS URL to mediaservices at microsoft dot com
    Cheers,
    Azure Media Services PM team

  • Windows To Go windows/system32/Winload.exe corrupt or missing

    I have a windows to go hard drive and an error came up recently saying "windows/system32/winload.exe corrupt or missing". I made a recovery drive from normal windows 8 but it cant detect the windows to go hard drive (I think its because its only
    looking to internal hard drives). any help would be appreciated. thanks
    EDIT:: it should say winload in the title

    Hi!
    My name is Long.
    I've got the same issue like you and resolved that without repartition and reinstall window to to. 
    I will so you step by step what i did to resolve the error with winload.exe corrupt or missing. I hove that will help you resolve your problem too.
    As you known: Window to go run in a external harddrive with 2 partitions. The first Partition have 350 MB (FAT32, active partition and it contain boot files). The second partition have remaining space (contain window files).
    The first you need a computer have a working window 7 or 8 OS(recommend window 8 or highter)
    Plug your window to go hard drive to the window.
    Assign the first partition 350 MB by disk manager with letter Z: (normally the fist partition 350 MB is not mounted)
    Assign the second (contain windows files) with letter O:
    Delete all file in the partition Z:
    Open CMD and do the command.
           O:\windows\system32\bcdboot O:\windows /f ALL /s Z:
    Restart and boot to window to go.
    If you want to know why i did that, read below:
    (External Hard Drive = EHD)
    i found a lot of the suggests in the internet and did that.
    - I had try to replace the winload.exe file in the second partition but it not effect.
    - I replace the registry data in folder \windows\system32\config but it not effect.
    - I did some commands found in the internet but not effect too. (https://social.technet.microsoft.com/Forums/windows/en-US/1b2045b9-7fef-47f0-aea3-1e185fb7544c/fix-winloadexe-is-missing-or-corrupt-no-its-not)
    - System repair not work with EHD.
    After i did all the ways found in the internet, i think that, the problem is not due to winload.exe file.
    I read the tips to install window togo again and i try to reinstall the window to go without repartition.
    The install have 2 steps: 
    - 1: Partition and set active.
    - 2: Copy file and make boot
    I ignor the first step because my EHD have got 2 partitons like the tips. 
    I delete all file and folder relate to window except my pertional data (in the 2nd partition).
    I extract install.wim file and copy all to the 2nd partition. I restart and boot to EHD but it still got error.
    I'm used Bootice and check the MBR of EHD and i got unknown MBR. I think the the problem.
    So I used Bootice software, set MBR of EHD = Windows NT 6.x. and I
    Set PBR to 2 partitions are BOOTMGR boot record (FAT32/NTFS/ExFAT).  I restart and boot to EHD but it still got error.
    Next, I delete all file in 1st partition of EHD.
    I Open CMD and do the command 
    "o:\windows\system32\bcdboot o:\windows /f ALL /s z:"
    after that, i restart and boot to EHD and it worked. The window to go work perfect but i lost all settings :)
    So i think the 2nd partition and all files is ok. The problem is by the 1st partition.

Maybe you are looking for