Cost assignement using infotype 2003

Hello,
How can I change cost assignement using Infotype 2003.
I have created the infotype 2003 with the ney cost center, and table C1 is generated in the time evaluation, but in payroll the cost center is still the master cost center of IT0001.
How can I change the cost center using infotype 2003 and transfered to the payroll?
thx.
Enrique

Thanks Santhosh for the answer.
So I can understand that the cost center will not be changed from IT2003 for the payroll, it only be changed if change in IT0001 or IT0027. true?
Why IT2003 have the option to change cost assignment?
I was doing some tests and could see that if a time wage type (for example an attendance) is generated in the same period of the IT2003 these wage type is transfered to the payroll with the new cost assignment . Is it the standard behavoir of the IT2003?
The only way to change the cost assignment for all the payroll (instead of IT0001) for a period is using IT0001 or IT0027?
thanks,
Enrique

Similar Messages

Average Headcount for Cost Center using Infotype 0027

Hi everybody,
has any of you experience calculating an average headcount for cost center using the information of infotype 0027.
As far as I know the infosources por PA-PA does take into account the infotype 0027 and the employee is just count for the master cost center.
I can not find the way to split the employee in different cost centers.
Any help will be very useful.
Thanks a lot.
Cristóbal.

Remi,,, hi many thanks!! It worked out well!!!
Many thanks as always,,,,

Cost Assignment in Infotype 2002

Dear All,
I have a requirement with my client. The client requires that the attendance of the employees has to be distributed to different Cost centers based on different projects.
For eg. 1 employee works in 3 different projects. His attendance is recorded in IT 2002. while recording his attendance also his project Cost center is maintained in IT 2002. When payroll is processed the cost center is populated in C1 table. But the value for the number of days is not populated. Also table APS is also not populated.
Please let me know if the Cost center is maintained in Cost Assignment in IT 2002, the SAP Help document says that the Cost will be distrubuted to the Cost centers maintained and the balance will be debited to the Master Cost center. But the same is not happening in my case.
Please request your help in this case.
Thanks in Advance.
Regards,

Dear Swapnil / Varma,
Thanks for the reply. I have done the same and the C1 table is getting populated with the Cost center. But the value in USD is not getting debited to the respective Cost Centers. In Table C1 the hours feild is getting displayed as 0 instead of the number of Hours entered in IT 2002. Also I could understand that the Table ALP has to be populated but the same is also blank.
Please advised.
Thanks in Advance.
Regards,

How to do the cost assignement mandatory in infotype 0014

Hi everybody,
does any of you know how to do the cost assignment mandatory in infotype 0014?
We have use the feature COBLT and table T588N for Function Module RP_TIME_COBL_002, and now the field COBL-AUFNR is mandatory, but we need the cost assignment to be mandatory, I mean should be impossible to save a new record without cost assignement. Is is possible using standard functionality or I have to use the user exit in PAI?
Thanks in advance.
Cristóbal.

Hi,
Instead of user exit, do as below.
Go to Table using SM30->V_T588M. Give module pool name as MP001400.
Now check your correct variable key for the feature & click on the corresponding Alternative Screen for e.g. 2010 & now go that field & mark that field as required field by choosing the second radio button.
Hope this will solve your problem.
Thanks,
Sarika.

Table cost assignment 2003

Dear Guru's ,
Does anyone know in which table the cost assingment recorded in infotype 2003 is stored.
It is not stored in table Pa2003.
We need this data for migration.
Kind regards.

Hi,
the cost assignment is stored in table ASSOB_HR.
Regards
Mark-André

Problems with Upload record to Infotype 2010 together with Cost Assignment (PREF)

Hi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank you

Hi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank you

Cost Assignment button in Infotype 0416

Hi,
I want to add a button similar to the 'Maintain Cost Assignment' found on the IT0014 screen in the application toolbar of IT0416. Also the button should perform similar functions. Can anyone know how to do it. Please do let me know.
Thanks,
Ashok

Hi,
I don't think there is any customising involved in this. You may need to go for Z development. However I would suggest you to wait for others to give their opinion on this.
If still you are not able to find any solution then raise this issue with SAP thourgh OSS. Why I am asking this is because there may be similar requirement at some other client and it would be better if we get this as standard solution. Simultaneously you may think of some other alternative.
VK

Ad Hoc Query - cost assignment

Hi Experts,
I'm trying to pull the contents of 'Cost Assignment' field i.e manually entered cost centre which is available as a button on infotype 2002 & 2003 screens.
In an Ad-hoc Query, it is not available as a field in any of the standard infosets.
Is there a simple way of adding in the IT2003 cost assignment field?
Please help.
Thanks,
Arpita

Hi,
You need to add table ASSOB_HR to your infoset. The cost assignment data is stored in that table. Use PERNR and INFTY to get the cost assignment data.
Hope this helps.
Donnie

Cost distribution on infotype 15

We have our cost distribution assigned to our positions; we do not use IT0027. In some cases, we want certain types of payments to be posted to a specific cost center and fund. We enter these payments on IT0015. When I try to use the maintain cost assignment on the infotype, I get the following message:
"Account assgn Functional Area is active in HR on 09/06/2009 and must therefore contain a value"
The functional area is also set up on the cost distribution at the position level. What are we missing that is preventing us from using this functionality on IT0015?
Thanks in advance for the guidance!!

Thanks.
The functional areas are defined using transaction PO13, infotype 1018, field FKBER.
I removed the cost distribution on the position and left only the account assignment, IT1008, on the position. I tried entering the cost distribution on IT0015 with and without an IT0027, and I receive the same error message as before.

FM HR_INFOTYPE_OPERATION - Cost Assignment

hello,
I need to modify an 0014 infotype created by PA30.
I use the MF RP_PLANT_DATA_UPDATE_TABLES to create the assob and asshr
entries for that infotype, that´s ok.
Next i try to place the pa0014-REFEX = 'X' with the FM
HR_INFOTYPE_OPERATION but, I receive this message: "Enter a true account
assignment relevant to cost accounting" .I need to pass the cost
assignment in a way to avoid this.
How can i add the cost center to a infotype from HR_INFOTYPE_OPERATION
or how can i link the RP_PLANT_DATA_UPDATE_TABLES with my infotype.
BR,
Ionut

I am facing the same problem.
I want to insert infotype 2001, 2002 with cost assignment. But with this FM, i have no where to input the cost center and WBS.
Thank you.

Automatic generation of Cost Assignment

Hi all,
does anyone know if there is a BAPI, or a BADI that can be used to update a specific infotype 2002 record's Cost Assignment?
Ideally what i am trying to achieve is when the USER EXIT EXIT_SAPFP50M_002 is called for infotype 2002, i want to check a specific condition, and based on that, change the Cost Center assignment to something specific.
Anyone have any idea?
Thanks,
Chirag.

Hi
Check whether feature DDKNT will be useful for your purpose.
Regards
Sumit

IT2002 - Cost assignment

Hi,
Does there exist a function module that allows you to save the business area, cost center, order, etc. for a record in infotype 2002? (The functionality you can perform when creating a new record using transaction pa30 and clicking the "Cost assignment" button.)

Hi,
Can u brief on the problem...
Warm Regards,
Kapil

Add grant & fund to specific cost assignment in IT15

Dear All,
I'm usign R/3 4.7 with PS and UN (NPO) payroll module.
Grants adn Funds are activated.
IT1 and IT27 contains grants, funds, and funds center information.
In order to post specific wage type to specific cost center, we try to use the option in IT15 offered by the Maintian cost assignment function. But in this screen I do not have grant fund and fund center.
As this is required I can not validate the screeen receiving the following eror message :
"Account assgn Fund is active in HR on 01.01.2008 and must therefore contain a value"
It makes because this is a fucntionnal requirement otherwise .
Does anyone know how to add grant, fund and fund center to this specific screen ?
I couldn't find any notes about this.
Best regards
Philippe Boutarin
Edited by: Phillipe BOUTARIN on Oct 17, 2008 2:39 PM

Hi
Use CK74N.. You can add the value you want and also the cost ele of your choice.. Save it in CK74N
Now when you run CK11N, the cost you added in CK74N would get added to CK11N's own cost
br, Ajay M

PR05 Cost Assignment cost center default

Hello,
I want to have the employee's cost center defaulted on the PR05 screen.
I want to default it at the Entire Trip's Cost Assignment.
I am aware of the user exits available, however, i need to know if there is a way to default it without using the user exits.
Thanks,
Jerry

Hi jerry,
By default, all trip cost is charged to employee's cost centre ( even if you have not been mentioned any cost centre) otherwise as per calculation guidelines.
http://help.sap.com/saphelp_46c/helpdata/en/e6/3152a396d811d194c100a0c92946ae/content.htm
if you want to strict that trip shall be charged only employee cost center, then you have to change following.
Cost assignment specification: Complete Trip RP_TRAVEL_COBL_1700
Following is the more help available for your information.
I hope it would serve your purpose..
Best Regards,
Muhammad Umer
Set Up Variable Layout for Account Assignment Objects
The travel expenses accounting dialog contains the option to record cost assignment specifications for the complete trip, additional destinations (stopovers), receipts and the kilometer/miles distribution.
The user is provided with two options for this purpose: The entry area Alternative Cost Assignment to Master Cost Center in the travel expenses dialog, or the Enhanced Cost Assignment function.
Travel Management offers five different coding blocks that you can use to control the cost assignments within Travel Expenses accounting.
In this IMG activity you define the screen layout for the account assignment objects - the selection and order of these objects. In addition you can specify the field characteristics for each of the account assignment objects.
You can make these settings in relation to a specific user or the organizational assignment of the employee.
To do this, copy the return value from the feature TRVCO as a variable key into the key of the fields with which you want to set up the coding block.
Note
The feature TRVCO is only evaluated during screen layout of a coding block if it is assigned to the corresponding function module in the view Screen modification for assignment data. This view can be accessed using the entry Check assignment of feature TRVCO to coding blocks in the selection screen for the IMG activity Set up variable layout for account assignment object
In the standard version feature TRVCO is assigned to function modules. You should not change the following assignments:
Coding Block for Function Module
Cost assignment specification: Complete Trip RP_TRAVEL_COBL_1700
Cost assignment specification: Receipts RP_TRAVEL_COBL_1701
Cost assignment specification: Destinations RP_TRAVEL_COBL_1702
Cost assignment specification: Miles/KMs Distrib. RP_TRAVEL_COBL_17
Activities
1. Check the assignment of feature TRVCO to the function modules for the coding blocks using the appropriate action in this activity.
2. You can create new entries as follows:
a) Choose the action Account assignment object: Cost assignment specification: <appropriate entry area> in this IMG activity.
b) In the variable key field, enter the required return value from the feature TRVCO.
c) Enter the name of the field needed in the Variable name field.
d) Specify the field attributes for the field.

Change default cost assignment specification

Hello,
I do have an organisation which assignes all travel expenses to (project) orders instead of cost centers.
Is there a way to change the default cost assignment (cost centers) to (project) orders on the travel expense WebDynpro?
As there is no project order maintained in any employee related Infotype this should force the traveller to select the appropriate (project) order from a list.
Thanks for your feedback,
Wolfgang

Hello Wolfgang
Good news you can do this by customizing
You can even hide unused cost objects if you need only orders.
This can be customized here : Financial accounting (new) => travel management => Employee Self-Services => Interface Configuration for web dynpro interface in travel management => Set up variable layout for account assignment objects
Hope this helps
Mathieu

Cost assignement using infotype 2003

Similar Messages

Maybe you are looking for