Cost center in F.08 standard report.

Dear Friends ,
I need cost centre to be included in RFSSLD00 (Tcode-F.08) Report. It is basically a mpp program
i dont know how to add that as the input parameter in this report. there is also a dynamic selection ,i need to know how to add cost centre in the dynamic selection(if possible). please tell me,can i add it in the dynamic selection list or as input parameter/select-option.currently i am proceeding this by copying the RFSSLD00 into a z program.
Thanks & Regards,
Shans.
Edited by: shanmugasenthil on Sep 6, 2011 11:27 AM

Hi Andreea
You can select cost center from Dynamic Selections
For eg: Accounting: secondary index for GL accounts tab in Dynamic selections
Asha

Similar Messages

Cost center after settlement in FAGLL03 REPORT

we have process of material issue thru maintennce order. after issuing material FI entry is on respective gl and maintence order
in report fagll03 we can see this combination and then after settlement of cost of order on cost center we are not able to see cost center in report fagll03.
is it possible to get cost center after settlement in this report.
if no then how can we see cost center / gl / material report for maintence orders.

You can't able to see the cost center report until settle the maintenance order to cost center with secondary cost element.
after settlement also you can't see in FAGLL03, you can see only cost center report with secundry cost element

Cant change COST CENTER GROUPS and/or Standard Hierarchy

Hello all,
im facing some problems during change of COST CENTER GROUPS and/or Standard hierarchy.
When im trying to select im getting following error Value maintenance not allowed ->Standard Hierarchy
When i do get the selection of the cost center that i want to remove from the hierarchy im getting this error Function is not supported in the standard hierarchy.
I dont know anymore what to do.
ive searched in forum and google but still didnt find enything usefull.
Regards
Laurynas Prikockis

Hello,
There is no word called removal in SAP. It would have been properly pronounced if say "Delete".
In case of delete, I do accept, there should not be any planned or actual line items during the fiscal year. If there are any actual or planned lines items you cannot delete the cost center during that period.
However, you can still delete the cost center in the next fiscal year if there are no actual or planned line items.
Hope this makes clear.
Regards,
Ravi

S_ALR_87013611 - Cost center: Actual/Plan/Variance selection report - outpu

Hello all,
when running the report,it can be seen in SAP screen by cost groups and by cost elements.
The problem is that when user tries to save report in local file, then it is not able to see cost center distribution. User can only see cost elements amounts.
is there a way we can save on a local file cost groups as well?
Thanks in advance for letting me know
regards
Hana

Hi,
Look for data source 0CO_OM_CCA_1 ( Cost Centers: Costs and Allocations ) ..it will give you the plan / actual /commitment amounts & qty.
Link is http://help.sap.com/saphelp_nw04/helpdata/en/8d/1f383fe58d5900e10000000a114084/frameset.htm
Hope that helps.
Regards
Mr Kapadia

Cost center + Activity actual consumed quantity report

Dear Friend,
I want to see acitivities actual conumption (operation confirmation by PP) quantity with the combination of cost centers. Please provide me some reports number.
thanks
Ravi

Hi Ravi,
try S_ALR_87013646 - Activity Types: Period Breakdown
S_ALR_87013647 - Activity Types: Scheduled/Plan
S_ALR_87013617 - Area: Activity Types
S_ALR_87013629 - Activity Types: Reconciliation
S_ALR_87013630 - Activity Types: Plan Receivers
KSBT - Cost Centers: Activity Prices
KL20 - Template Allocation Structure: Cost Center/Activity Type
Hope this helps you....
Regards,
Sreekanth....

Adding a new Cost Center code to a 82ax Report painter

Hi experts,
I am asked about adding Cost center code to the left of a 82a Report painter(Where the Pepe element code and description is) without modifying the actual length of that colum....
Is this possible??
Thank you very much.
Artur.

Ok, no reply for this

Combination of cost center and GL account in Report painter report

Hi Guys,
Im creating a report for profit centers using library 0FL- which uses table FAGLFLEXT in the report painter GRR2.I need to enter cost center with gl accounts in the characteristics.as these cost centers
are assigned with cost elements.Can I do that ? cuz when I enter combination of gl a/c and cost center,I wobn't get nay data but only gl accounts shows the correct data.How to use combination of cost center and gl a/c, or I am good only with gl a/cs.Please suggest.
Regards
Shaun

Hi
Just check the G/L account assigned in the PO against the cost center, The G/L account assigned may not be the correct one, Check out if any validation is there for the combination, contact your FI-CO guy as there are always restrictions unknown to a MM guy.
Regards

Cost Element with Cost center in column in one report

Hello experts,
Kindly, can you help me to create a report where I can see for each cost center all the cost element balance related.
B. R
F Tay

Use KSB1...
Thanks

Cost Center Missing in Income Statement Report

Hello Gurus,
At this moment we are facing a critical situation. We are currently running a Custom report which is based upon a Custom Multiprovider. The Multiprovider gets the data from a remote infocube, a virtual infocube and four info objects(All Custom). The remote infocube is based upon the datasource 0FI_GL_10. We are currently having the 34 Cost Centers configured. The end users can see only 12 Cost Centers in the report. How can i resolve this issue??
Harsh.

Please check on authorizations for the users in question. Are all the users facing the same issue? Is it just one user group having issues or all the groups that have access to this report/data-provider? To eliminate authorization issues, Tcode RSECADMIN>Execute as User (your user name)> Check 'With Log' option-->Check RSRT option 'Possible Transactions' and Execute. Enter your query name and execute. Come back to RSECADMIN and check the logs. Select all authorization relevant options and check for logs. Repeat the process for different users. See if the authorizations vary with users.
Hope this helps.

KSBB transaction - text to be added for standard reports

Hi,
We have a requirement of changing / filling the texts for the Statndard reports and User defined reports in the KSBB report tree.
Client has provided an excel sheet containg the report texts for Languages DE, EN, ES, TR, ZH and KO.
We could see the descriptions if we login into DE,EN,ES,TR but for Languages ZH and KO it appears like below in the Production system - with BLANK description:
RKS1-0
   RKS1-01
      RKS1-011
Wheras, we have values in our development system for these as below:
Cost center Accounting
    Plan / Acutal comparisons
       Cost centers: Actual/Plan/Variance (Standard Report : S_ALR_87013611)
The question is how to IMPORT these values from development system (also with values given in the Excel sheet) to the production system above.
PS: client also mentioned like "for the standard reports it is only necessary to import the reports from client 000" does this have any relevance to this above issue?
Request you to provide solution to the above issue. Also, please let me know in case of further explanation required for analysis.
With Regards,
Ravi Raghavan

Hi Ravi,
Can you try in the following IMG path.. I never faced this, but gut feel says importing report from 000 should help
IMG Path is Controlling > Cost Center Accounting > Information System > Standard Reports
Regards
Ajay M

Cost center report with line items by date

Hi guys,
i need to create a report by date, for cost centers that displays individual line items?,
do u know if there is a bapi or RFC for this?
what tables are related for line items dates?
i already know that coep but this table has period and not by date
any ideas?
tks in advance

Hi,
You can check out std reports like KSB1, KSB2, KSBP, KSB5.
Also check Accounting-> controllong-> Cost center accounting-> Info system-> Reports for cost center accounting-> line items/more reports.
Tables: COSP, COEP, COBK
FM: K_KKB_KKBCS_COST_CENTER_REPORT
Regards,
Amit

Cost center report

Frnds
i need to generate a report that can give me following details
Vendor name, Purchase order#, Cost center.
Which transaction or report i have to run?
Thanks

Hi matt,
Try t code ME2L or t code ME2K
assign points if useful
Regards
genie

Report pianter report issue (Cost center Heirarcy issue)

Hi,
Please consider this issue as an emergency and reply,
when I execute a report painter report for highest cost center heirarchy, all cost centers are appearing at level 2, (cost center group level) in the report, but when I execute the same report for each sub group of the heirarcy, cost cetner are coming at level 1 (cost center level) in the report.
where as the same heirarcy is copied to test system and run at highest hierarchy level, to produce the same error, but it is not occuring in test system it is happening only in produciton system.
can you please advice me which is causing the problem to the report.
Thanks,
Ramesh.

I am sorry, I am correcting the statment above, it is not all cost center that come at cost center group level when I execute the report at highest heirarchy, only few cost centers of the cost center goups, if I execute the report at scuh sub group level, cost centers come at cost center level. Please advise.
Thanks

Interactive report for Cost center

Can any body tell me what are tables involved in creating a cost center reports for department wise data and cost center category wise data.

*& Report ZFI_ASSIGNED_FUNDS
REPORT ZFI_ASSIGNED_FUND.
TABLES: FMIT,FMCIT.
TYPE-POOLS: SLIS.
*ALV data declarations
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      FIELDCATALOG1 TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
      GD_LAYOUT    TYPE SLIS_LAYOUT_ALV,
      GD_REPID     LIKE SY-REPID.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: RFISTL FOR FMIT-RFISTL,
                FIKRS FOR FMIT-FIKRS,
                RYEAR FOR FMIT-RYEAR.
SELECTION-SCREEN END OF BLOCK B1.
DATA: BEGIN OF IT_FMIT OCCURS 0,
        RYEAR LIKE FMIT-RYEAR,
        FIKRS LIKE FMIT-FIKRS,
        RFISTL LIKE ZREV_BUDGET-KOSTL,
        RFIPEX LIKE ZREV_BUDGET-KSTAR,
        TSL01 LIKE FMIT-TSL01,
        TSL02 LIKE FMIT-TSL02,
        TSL03 LIKE FMIT-TSL03,
        TSL04 LIKE FMIT-TSL04,
        TSL05 LIKE FMIT-TSL05,
        TSL06 LIKE FMIT-TSL06,
        TSL07 LIKE FMIT-TSL07,
        TSL08 LIKE FMIT-TSL08,
        TSL09 LIKE FMIT-TSL09,
        TSL10 LIKE FMIT-TSL10,
        TSL11 LIKE FMIT-TSL11,
        TSL12 LIKE FMIT-TSL12,
        TSL13 LIKE FMIT-TSL13,
        TSL14 LIKE FMIT-TSL14,
        TSL15 LIKE FMIT-TSL15,
        TSL16 LIKE FMIT-TSL16,
     END OF IT_FMIT.
DATA: BEGIN OF IT_FMIT1 OCCURS 0,
        RYEAR LIKE FMIT-RYEAR,
        FIKRS LIKE FMIT-FIKRS,
        RFISTL LIKE ZREV_BUDGET-KOSTL,
        RFIPEX LIKE ZREV_BUDGET-KSTAR,
        TOTAL LIKE FMIT-TSL01,
     END OF IT_FMIT1.
DATA : BEGIN OF IT_BUDGET OCCURS 0,
         GJAHR LIKE ZREV_BUDGET-GJAHR,
         KOSTL LIKE ZREV_BUDGET-KOSTL,             " COST CENTER
         KSTAR LIKE ZREV_BUDGET-KSTAR,
         APR_B LIKE ZREV_BUDGET-APR_B,
         MAY_B LIKE ZREV_BUDGET-MAY_B,
         JUN_B LIKE ZREV_BUDGET-JUN_B,
         JUL_B LIKE ZREV_BUDGET-JUL_B,
         AUG_B LIKE ZREV_BUDGET-AUG_B,
         SEP_B LIKE ZREV_BUDGET-SEP_B,
         OCT_B LIKE ZREV_BUDGET-OCT_B,
         NOV_B LIKE ZREV_BUDGET-NOV_B,
         DEC_B LIKE ZREV_BUDGET-DEC_B,
         JAN_B LIKE ZREV_BUDGET-JAN_B,
         FEB_B LIKE ZREV_BUDGET-FEB_B,
         MAR_B LIKE ZREV_BUDGET-MAR_B,
     END OF IT_BUDGET.
DATA : BEGIN OF IT_BUDGET1 OCCURS 0,
         GJAHR LIKE ZREV_BUDGET-GJAHR,
         KOSTL LIKE ZREV_BUDGET-KOSTL,             " COST CENTER
         KSTAR LIKE ZREV_BUDGET-KSTAR,
         TOTAL1 LIKE FMIT-TSL01,
       END OF IT_BUDGET1.
DATA: BEGIN OF IT_FINAL OCCURS 0,
       FIKRS LIKE FMIT-FIKRS,
       RFISTL LIKE FMIT-RFISTL,
       RFIPEX LIKE FMIT-RFIPEX,
       TEXT LIKE FMCIT-TEXT1,
       ALLOC LIKE FMIT-TSL16,
       USED LIKE FMIT-TSL16,
       REMAIN LIKE FMIT-TSL16,
     END OF IT_FINAL.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM PROCESS_DATA.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM DISPLAY_ALV_REPORT.
*&      Form GET_DATA
*       text
* --> p1        text
* <-- p2        text
FORM GET_DATA .
SELECT RYEAR
         FIKRS
         RFISTL
         RFIPEX
         TSL01
         TSL02
         TSL03
         TSL04
         TSL05
         TSL06
         TSL07
         TSL08
         TSL09
         TSL10
         TSL11
         TSL12
         TSL13
         TSL14
         TSL15
         TSL16
         INTO TABLE IT_FMIT FROM FMIT
         WHERE RYEAR IN RYEAR
         AND   FIKRS IN FIKRS
         AND   RFISTL IN RFISTL.
LOOP AT IT_FMIT.
    MOVE-CORRESPONDING IT_FMIT TO IT_FMIT1.
    IT_FMIT1-TOTAL = IT_FMIT-TSL01 + IT_FMIT-TSL02 + IT_FMIT-TSL03 + IT_FMIT-TSL04 + IT_FMIT-TSL05 + IT_FMIT-TSL06 + IT_FMIT-TSL07
                     + IT_FMIT-TSL08 + IT_FMIT-TSL09 + IT_FMIT-TSL10 + IT_FMIT-TSL11 + IT_FMIT-TSL12 + IT_FMIT-TSL13.
    IT_FMIT1-TOTAL = IT_FMIT1-TOTAL * -1 .
    COLLECT IT_FMIT1.
ENDLOOP.
LOOP AT IT_FMIT1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = IT_FMIT1-RFISTL
      IMPORTING
        OUTPUT = IT_FMIT1-RFISTL.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = IT_FMIT1-RFIPEX
      IMPORTING
        OUTPUT = IT_FMIT1-RFIPEX.
    MODIFY IT_FMIT1.
ENDLOOP.
SELECT   GJAHR
           KOSTL
           KSTAR
           APR_B
           MAY_B
           JUN_B
           JUL_B
           AUG_B
           SEP_B
           OCT_B
           NOV_B
           DEC_B
           JAN_B
           FEB_B
           MAR_B
           INTO TABLE IT_BUDGET FROM ZREV_BUDGET
           FOR ALL ENTRIES IN IT_FMIT1
           WHERE GJAHR IN RYEAR
           AND   KOSTL EQ IT_FMIT1-RFISTL
           AND KSTAR EQ IT_FMIT1-RFIPEX.
LOOP AT IT_BUDGET.
    MOVE-CORRESPONDING IT_BUDGET TO IT_BUDGET1.
    IT_BUDGET1-TOTAL1 = IT_BUDGET-APR_B + IT_BUDGET-MAY_B + IT_BUDGET-JUN_B + IT_BUDGET-JUL_B + IT_BUDGET-AUG_B
                        + IT_BUDGET-SEP_B + IT_BUDGET-OCT_B + IT_BUDGET-NOV_B + IT_BUDGET-DEC_B + IT_BUDGET-JAN_B +
                        IT_BUDGET-FEB_B + IT_BUDGET-MAR_B.
    IT_BUDGET1-TOTAL1 = IT_BUDGET1-TOTAL1 * 100000.
    COLLECT IT_BUDGET1.
ENDLOOP.
ENDFORM.                    " GET_DATA
*&      Form PROCESS_DATA
*       text
* --> p1        text
* <-- p2        text
FORM PROCESS_DATA .
LOOP AT IT_FMIT1.
    IT_FINAL-FIKRS = IT_FMIT1-FIKRS.
    IT_FINAL-RFISTL = IT_FMIT1-RFISTL.
    IT_FINAL-RFIPEX = IT_FMIT1-RFIPEX.
    IT_FINAL-USED   = IT_FMIT1-TOTAL.
    READ TABLE IT_BUDGET1 WITH KEY KOSTL = IT_FMIT1-RFISTL KSTAR = IT_FMIT1-RFIPEX.
    IF SY-SUBRC EQ 0.
            IT_FINAL-ALLOC   = IT_BUDGET1-TOTAL1.
    ENDIF.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT = IT_FMIT1-RFIPEX
      IMPORTING
        OUTPUT = IT_FMIT1-RFIPEX.
    SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'
                                                      AND   FIPEX EQ IT_FMIT1-RFIPEX.
    IT_FINAL-REMAIN = IT_FINAL-ALLOC - IT_FINAL-USED.
    APPEND IT_FINAL.
CLEAR IT_FINAL.
ENDLOOP.
ENDFORM.                    " PROCESS_DATA
*&      Form BUILD_FIELDCATALOG
*       text
* --> p1        text
* <-- p2        text
FORM BUILD_FIELDCATALOG .
FIELDCATALOG-FIELDNAME   = 'FIKRS'.
FIELDCATALOG-SELTEXT_M   = 'Functional Mng Area'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'RFISTL'.
FIELDCATALOG-SELTEXT_M   = 'Fund Center'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'RFIPEX'.
FIELDCATALOG-SELTEXT_M   = 'Commitment Item'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'TEXT'.
FIELDCATALOG-SELTEXT_M   = 'Commitment Item Text'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'ALLOC'.
FIELDCATALOG-SELTEXT_M   = 'Allocated Budget'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'USED'.
FIELDCATALOG-SELTEXT_M   = 'Used Budget'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'REMAIN'.
FIELDCATALOG-SELTEXT_M   = 'Remaining Budget'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       text
* --> p1        text
* <-- p2        text
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT          = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       text
* --> p1        text
* <-- p2        text
FORM DISPLAY_ALV_REPORT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = GD_REPID
      IS_LAYOUT          = GD_LAYOUT
      IT_FIELDCAT        = FIELDCATALOG[]
      I_SAVE             = 'X'
    TABLES
      T_OUTTAB           = IT_FINAL
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT

Cost Center field in ME55 Report (Change Layout)

Hi all,
In ME55 (Collective Release for PReq) Cost Center is available as one of the "Selection fields", but it's (Cost Center field) NOT available in Change Layout Function (after you execute the report).
The requirement is the user want to see the Cost Center field in the ME55 report layout instead of having to drill down to each PR to see the Cost Center assigned to the PR Account Assignment.
Since Cost Center field in NOT available in the Change Layout function of ME55, How do I add it to the layout? Do I need enhancement? If so what do i need to do?
Thanks in advance

Hai,
Please copy the RM06BF00 into zRM06BF00 & take help of your software engineer/abaper for modification of this program for adding cost center in the output.
With Regards,
Jaheer.

Cost center in F.08 standard report.

Similar Messages

Maybe you are looking for