Cost centre not displying in FS10N if cost centre is created with catg 11

Hi All,
If cost element is created with catg 11 (revenue) then in FS10N for document cost centre is displaying as Blank. But if Cost element is 1 then Cost centre is displaing in FS10N report. Is there is any solution for it.My customer wants to display cost centre even if cost element is 11. Can any one help/guide me.
Thanks in advacne.
Nagendra

Hi,
FS10N is totals report; I guess, you mean FBL3N (which is drill-down of FS10N). If the document is posted on cost centre, then it will be displayed. Notice, that cost element 11 (income) is usually posted with another cost object, as it could not be posted only to cost centre, since incomes are posted statistically to cost centres. So, veirfy that the documents in question are posted to cost centre at all.
Regards,
Eli

Similar Messages

TS3999 Why are my photos not showing in my web journal that I created with iPhoto?

I Created many journals in the past with no problem this weekend I created a new journal and when I access the website the photos do not appear., only grey squares with my notes the date and the weather. I visited the apple Genius Bar and they could not help. They said maybe it is a problem with the Apple Server. apple.com server website shows no problems with their server. Help please

I've been experiencing the same problem. Both new and old web journals do not display properly. Most photos are gray squares, but if I hit refresh I am sometimes able to partially view the album. This problem occurs both within iPhoto and in various web browsers.
iPhone and iPad with iOS 7.1.2, and iPhoto 2.0.1

Product cost by sales order with Valuated Sales order stock

Hi Gurus,
I am working on Poduct cost by Sales Order with Valuated stock. but i have doubt ragarding to Cost estimation.
1.In sales order scenario also Standard Cost estiamtion (CK11n and CK24) and Marking, Releasing is Mandatory? if not how can we estimate the cost?
2. If we are estimating the cost by using Standard Cost estimate, when can we estimate the cost?
can anybody please give me the steps which we are following in Poduct cost by Sales Order with Valuated stock from starting to end Settlement
Thanks&Regards
Prasad

Hi,
there are 3 types of scenarios in MTO.
In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver. Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
Please let me know if you need further details in this regard
Surya

Production order costing issue in MTO with variant configuration

We have an urgent issue to be resolved in production order costing in MTO scenario.
We have two level configuration with configuration passed from parent to children. The parent has many configurable materials as child(semi finished BOM items) and BOM items of these child has again different raw materials(3 level BOM with last level being all raw materials) . The production order for parent created with reference to sales order.
While costing production order of parent, total planned price is displayed as zero as we have maintained price control std price for all configurable materials(parent & child) with zero price being configurable materials.Configurations are correct in production order material and BOM components(configurable materials). BOM item selections, Item quanties are also correct.
Sales order costing is working fine and rolled-up correctly as per costing settings. We have looked at costing configuration for production order and did not find anything unusual.
Kindly suggest possible reasons for not showing costing result in production order as per configuration copied from sales order or any possible configuration or master data likely missing ?
Thanks in advance.
Kind Regards
Ganeshan Kalembeth

Dear GANESHAN KALEMB,
Kindly open production order in change mode and reschedule order, cost order, check material availability and check capacity availability.
after doing this in main menu goto > log > overview > see error list if there is any, let me know, your problem can be solved.
Thanks
Muhammad Ashfaq

Producrt Cost by Sales Order with Valuated Stock

Hi Gurus,
My client is having Producrt Cost by Sales Order with Valuated Sales Order Stock. Can anybody reply me for my following issues.
1. while calculating Sales order cost estimate thru VA02 , the same Cost estimate is appearing against with EK02 condition type in Sales order Condotions. what is the use of Sales order Cost estimate? is there any impact on production?
2. What is Difference between Sales Order Cost Estimate and Order BOM Cost estimate?
3.when can we calculate Sales Order Cost estimate ? whether before Production or before billing ? can anybody tell me please..
4.while settling the production order also system picking the cost in VPRS not in EK02, i am not sure about this step.can any body correct if i am wrong
5.I know we can caluculate WIP in Sales order also. when can we calculate ? before settling the Production order or after production ?
thanks
Prasad

Hi,
there are 3 types of scenarios in MTO.
In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver. Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
Please let me know if you need further details in this regard
Surya

No Centry in CDHDR when Cost Center is created via Idoc

Hi All,
Whenever a cost center is created via an Idoc the corresponding entry is not maintained in CDHDR table.
Whereas if I use Tcode ks01 to create Cost Center (ie via screen) then there is an entry to CDHDR table.
I tried debugging the FM IDOC_INPUT_COSTCENTER .
Here in PERFORM write_ale_cp_via_cd tables LT_CSKS,
there is a call to CALL FUNCTION 'IDOC_CD_WRITE_CHECK,
here ld_active is always initial.
If I set this as X while debugging then I do have my entry in CDHDR table.
Can anyone let me know the significance of this ld_active and why is it not set to X initially.
As it is important for me to have entry in CDHDR because I need to trigger an event as a cost center is added.
Kindly advice.
Regards,
Sweta

Sweta,
The same problem has lingered with me for awhile now. Finally, I have a solution.
The controlling area needs to be configured for master data distribution. Take a look at the view V_TKA01_ALE to confirm that the controlling area(s) that you are working with have a logical system(TKA01-LOGSYSTEM) and distribution method(TKA01-ALEMT) set up. These fields are checked in the IDOC_CD_WRITE_CHECK function module. If they are blank, no change documents are created.
Hope this helps.
Brad

Change cost assignment (cost center) in confirmation with badi?

Dear experts,
for a certain request, we want to implement logic that will clear out the cost center when creating or saving the confirmation.
We have tried the DOC_CHANGE BADI but this does not seem to do the trick. following code:
LOOP AT acct_data into ls_acct_data.
    IF ls_acct_data-acc_cat EQ 'OR'.
      CLEAR ls_acct_data-cost_ctr.
    ENDIF.
    MODIFY acct_data from ls_acct_data.
ENDLOOP.
ET_ACC[] = acct_data
Is my code wrong, or should i use another badi?
Regards,
Tom

Hi,
I have tried the following but does not seem to change anything:
Loop at IT_ACC into ls_acct_data.
If ls_acct_data-acc_cat EQ 'OR'.
    CLEAR ls_acct_data-cost_ctr.
Endif.
MODIFY it_acc from ls_acct_data transporting acc_cat.
Endloop.
Also with the following method, it is not changing the account assignment. I am in doubt that this badi could actually change the account assignment on confirmation?
Loop at IT_ACC into ls_acct_data.
    If ls_acct_data-acc_cat EQ 'OR'.
      CLEAR ls_acct_data-cost_ctr.
      Append ls_acct_data TO lt_acc.
    Endif.
Endloop.
ET_ACC[] = lt_acc.
Edited by: Tom Seminckx on Jan 20, 2009 1:18 PM

Adding cost center on OKB9 with cost element company code with valuation ar

hi ,
can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
i have to do this configuration but do not know the detailed steps for that one.
Good points will be awarded.

Hi Prem
Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
Thanks
Ashok

Actual & planned costs calculated while creating Plant Maintenance Order

Hi All,
I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
Thanks,
Ajay

You need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
This can be done via transaction KP26, but is usually performed by your Finance team.
PeteA

Costing run for materials with special procurement key

Hello,
Since moving to ECC6, the costing run for materials with special procurement keys is not pulling the marked price from the materials the special procurement keys point to. Only the released prices are pulled.
Example:
Material A, plant A has a future price (costing 2 tab) of 100 and a current price of 99
Material A, plant B has special procurement key Z1 (costing 1 tab) which pulls the costing from Material A, plant A
In our old system (46c) the costing run for Material A, plant B would pull 100.
In ECC6, the costing run for Material A, plant B pulls 99
Anyone that can push me in the right direction?

Hi,
Based on the info provided thus far, the result that you notice in ECC 6.0 is right as it is picking the current standard price based on your setup.
Now why it is picking the future price in 4.6c, well for that you will have to do a detail check as in which variant is being used etc. I would suggest you to work with your CO personnel on this. Do a costing run for this particular material via CK11n using the variant which you mentioned & see the results.
Or if you can upload the screenshots (picasaweb or some other portal) of the valuation variant you're using in 4.6c, along with Acctng view 1 & 2, costing view 1 & 2 details of the material it would help to have a better understanding.
Regards,
Vivek

MIRO - additional costs - 2 acc. docs with different dates

Dear SAP Experts!
I have the following issue.
Case description:
On March 19 2008 my Customer entered additional costs in MIRO for material A. The document Invoice date and Posting date (as well as BaselineDt) on the header were entered as 29.02.2008
The way the additional costs were entered without purchase order reference, directly to Material Account using Material Tab.
The additional cost was entered for the ammount of material that was at that (29.02) moment on stock. (however there were some movements - sales and returns between 29.02 and 19.03)
The issue is - 2 accounting documents were created:
- one conatining postings to Vendor, Tax and Material accounts - with Invoice date and Posting date as entered in MIRO - both 29.02.2008
- second containing postin to Stock Account - Cr & Price Difference account - Db. however the dates that appear are Document date - 29.02.2008, Posting date 01.03.2008
So the first document goes to Period 2 and the second to Period 3.
Cutomer asks me for explanation.
The questions are:
1. Is this the way standard system works?
2. Why 2 accounting documents were created?
3. Why they were created with different Posting dates?
4. Why there were any postings done on Price Differences account if the additional costs were posted to the ammount that was on stock at the time?
5. Even if there is a logic that the date is different - why it was 01.03.2008 at this case not 10 or 19.03.2008 for example?
6. How does the system calculates the ammount that is posted to the Stock Difference accoun?
Thank you very much in advance for your advice!

Hi
1) PO quantity 100 unit. GR 40 unit and IR time also 40 unit.
This will post automatically during miro as GR/IR account value same for both GR and IR. The subsequent 60 unit in PO will be received in the next GR. is this process correct?
PO 100
GR 40
IR 40
Correct
2) PO quantity 40 unit. GR 100 and IR 100.
This will poat automatically during miro as GR/IR account value same for both GR and IR. User has to add additional line in PO for 60 units. is this process correct?
PO 40
GR 100
IR 100
You can the same line item of PO And invoice will get blocked.
3) PO quantity 100 unit, GR 100 and IR 50 unit.
Somehow in vendor invoice hardcopy stated 50 units. Due to different in invoice quantity, the invoice amount also different.
In miro, we cannot change the quantity value in line item. Amount at header less then total line item value.
GR/IR can be setoff completely as I do not change line item quantity. Correct?
May I know what should I do on the difference?
PO 100
GR 100
IR 50
You can post the invoice for 50 units. System will accept it.
4) PO quantity 100 unit, GR 100 and IR 150 unit.
Somehow in vendor invoice hardcopy stated 150 units. Due to different in invoice quantity, the invoice amount also different.
In miro, we cannot change the quantity value in line item. Amount at header more than the total line item value.
GR/IR can be setoff completely as I do not change line item quantity. Correct?
May I know what should I do on the difference?
PO 100
GR 100
IR 150
Invoice get blocked
Thanks
Raman

Customer not displyed in sales order

Hi all,
I'm facing problem with customer not displyed in sales order. While i'm creating sales order sold to party and ship to party fields both are grey mode ( fileds are not accepting any values). I set up partner detemination procedure for customer, sales header and item level. I don't know where i did wrong . Please solve my problem as early as possible.
Thanks & regards
Kesav

Dear Kesav,
Did you assign Partner procedure to sales document header??
Please do this Go to SPRO>SD>Basic Functions>Partner Determination>Set Up Partner Determination-->Set Up Partner Determination for Sales Document Header
Here select the Procedure and then click on Partner Determination Procedure Assignment and assign procedure to sales document type.
Thanks,
Raja

Hi my phone is not disply

hi my phone 4s is not disply but i call that number my is ringing

Is your iPhone, 1/3G/3GS/4/4s/5 running iOS 1/2/3/4/5/6 plugged into a wall socket or usb port?
Have you made sure the dock cable is working. Can you connect to iTunes?
If you are connected to a USB Port on your computer/laptop have you tried changing ports?
Are you using an apple wall charger or an aftermarket charger?
Did you plug your phone in and wait a few minutes if it was totally dead? It sometimes takes a few minutes for a phone with a totally flat battery to get enough juice into the battery to activate the screen and show you what's going on?
We would love to help you but we need more details.

Interface for all cost object related transtions with third party system

Hello Guru's
I have one required for Functional Specications i.e, i need to create interface for all cost object related transtions with third party system for this purpose i need to create FS. any body please guide how to do..

Hi sreedhar royals
You need to check controlling tables you need to interact. (CSKS, COAS,....) then ask your abaper and project manager to guide you.
Regards

Cost center Group associated with a Cost center

Hi Experts ,
I have a requirement , where I need to find the cost center group of given cost center.
Is there any FM to do the same?
I have Cost center in the Input and should get Cost Center group associated with it.
Thanks !!

BAPI_COSTCENTER_GETDETAIL

Cost centre not displying in FS10N if cost centre is created with catg 11

Similar Messages

Maybe you are looking for