Cost effective quicktime hosting service?

I'm looking for a recommendation on a streaming Quicktime H.264 Video server host. I've done a google search and there are hundreds... just checking if anyone is using a hosting service they like.
Cost effective would be nice.

Hey Guys,
This is Naimi from Charlotte, NC. I had some website design and web development projects which I wanted to outsourcing due to obvious reasons of low cost and effective results. I was looking for a reliable outsourcing company who have proven track record and can deliver the results on time. I came across this Offshore Software Outsourcing Company called Tatvasoft through Google. I just sent them an enquiry and within two days they were back with reply on how to go about it. Their plan seemed promising and they were very flexible. I thought of giving them a shot, and it worked out. I started out with the small project and ended up giving all my projects to them.
Thanks to Tatvasoft.
http://www.tatvasoft.com

Similar Messages

Is it more cost effective to host SAP software at my university?

Hi! I'm connected to a major university that has a high quality hosting area of it's own. Is it more cost effective for them to host SAP software themselves or should they use the services of the UCC? If the value is close then they may want more control in their own environment. Or if there's greater value with the UCC's then they can use their budget and resources in a different way!
Thanks for any insights on the best-in-practice way to proceed!
Best regards,
Richard

Richard
The answer to your question is that it is more cost effective to use an existing UCC hosting center as opposed to developing your own system. For example, in the Americas the cost of belonging to the University Alliance is the same whether you use the hosting center or not. Unless your current center can do all of the following for free: Purchase required hardware, train your staff, install and support the SAP software. and provide help desk support to your faculty. then it will cost you more to do your own hosting. The other advantage of using a UCC hosting center is that they can provide you the complete set of SAP products and they can create clients for use with the existing UA curriculum.
Dave Haseman - UCC Director, UWM UCC

How to find most cost-effective fwdg agent at the time of shipment creation

Dear Friends,
I have a requirement of realizing the best cost effective transporter(forwarding agent) in the shipment document. Then how to do using the Transportation functionality of the ERP?
There is a scenerio like I want to transport my goods from L to M. In system say i have a route XX for that, which gets automatically determined in the shipment document.
Now on route XX, if i have 5 operative transportors, say A, B, C, D, E.
Transporter A - provides services km-wise, kg-wise, fixed price as well as truck wise
(Say if you opt for km-wise, charges are 15 rs/km, 10 rs/kg, fixed price of 15000 for full truck from A to B)
Transporter B - Similar to Transporter A with different charges
(Say if you opt for km-wise, charges are 18 rs/km, 7 rs/kg, fixed price of 14500 for full truck from A to B)
Similarly other tranporters also have their charges.
and Now at the time of shipment creation, how can i have some standard method, so that the system suggest the most cost effective transportor for my delivery ie. shipment i want to make or probabaly if there is some standard way to get the list of all available transporters on a given route at the time of shipement creation.
Please suggest.
Regards,
Dipti.

Hi Sandeepan,
Thanx for ur reply.
As per my requirement, there might be say 100 routes existing into the system and each route might have say 10 different transportors available. Now they want to know 1) the list of transportors available on the given route - (run time at the time of shipment creation) to be put into the forwarding agent field 2) Of the available (say 10 transportors) who will be the best/cheapest.
As per your suggestion, the functionality helps after we put in the fwdg agent and then estimate his associated cost. But as in this case, since there are so many routes (associated so many transportors) they will not know whom to put in the field.
Hence want to know if there is some standard functionality of SAP which might help us i) identifying the list of transportors on a particular route or a given criteria - run-time ii) How to find the best among available OR i) SAP Directly suggesting the one and best transportor available on a given route.
Please help.
Regards,
Dipti.

Current Technology and Website Hosting Services

Hello: I am a 'one at a time' - small business website developer who is looking at renting website services hosting. There are companies that offer ASP.net and Microsoft servers. What is the current state of small business technology that I should be looking
for in a hosting service? Mindful of the importance of keeping cost to clients as low as possible, and yet offering the security of Microsoft servers, is ASP.net among the important technologies that should be on my list? What technologies would you recommend
in a hosting package - given an added criteria - that growth from a 1 person to a few persons business is being considered?

http://azure.microsoft.com/en-us/
you will find your technology and hosting choices above. run anything / anywhere. SaaS. SSO.
Regards.
Rob^_^

Best Cost effective way of fixing shattered iPhone

Hi all
My Mom recently dropped her phone (a short distance at that) and had the front of her iphone4 crack into a few good splits. The phone itself is still completely functionally sound, it just has a shattered glass front. I believe when we went to the apple store they said they could get her a replacement for $150 (or maybe that was AppleCare+?) but that there was another option to send it to iResQ for $90. Can any of you tell me the most cost effective method of getting this screen fixed?
Thank you!

If you do the out-of-warranty replacement you will have a warranty on the service replacement phone (90 days or what was left of the warranty on her phone, whichever is longer). 3rd party repair will be cheaper but there will be no warranty.

Free (ad free too) hosting service that works with iWeb?

Is there a free (and ad free, no pop ups banners or anything to make my site look ugly) hosting service that works with iWeb via FTP?

Actually, now that Gmail offers IMAP service that's basically the answer to my prayers. Also, if you don't know about it already Google's Apps offers you the option of having email with your own domain hosted by Google. It's like Gmail but with any domain you want. Pretty awesome. I bought a domain for my whole family to use. Email is free, only thing that costs is the annual domain registration/renewal.

Cost effective approach to NAC

Net Pros,
We have about 20 remote branch offices. Office size varies from as small as 2 users per office to as large as 30 users per office. Each office has either a Cisco 1801 or 1841 router that we manage. These routers basically provide DHCP, NAT, and Firewall services for the client computers, and all traffic simply goes out to various ISPs that provide the network for these offices. All computers at these offices are connected to non Cisco and unmanaged switches, which are connected to our routers. We have no control over the end users' computers at these offices, and these users do not access any network resources at the Headquarter. We merely provide internet access for these offices.
I have been reading about NAC, such as in band vs. out of band, virtual gateway vs. real IP gateway, layer2 vs. layer3, but I am not sure how to go about it.
What do you think the most cost effective approach to implement NAC is in this environment?

Since you have a reduced number of users on each site the best for you is to use a centralized server for all your users (the smaller server is a network module for 50 users, appliances go from 100, 300, 500, etc.) For this you'll need to allow Layer 3 connections (this means the end-users will be one or more hops away from your server).
Both Virtual and Real IP gateway should work for you. Depends on what you can do on the current network: Virtual gateway will act as a bridge so there's no need to change the topology on your network, it will work as a simple cable; real-ip gateway will add a hop to the path (will have a different network on each interface), so your topology may be changed a little.
Since sites won't be having access to your network resources the best would be to use out-of-band mode so the users will only authenticate with the NAC appliance and then will run free to the internet; however, since your switches are non Cisco, the communication needed for the Out-of-band is not supported, you'll have to use In-band mode. And all the traffic will need to flow through your NAC appliance...
I hope this information is useful.
Regards,

Error starting Oracle BI Java Host service

Hi,
We are facing some issue while starting the Oracle BI Java Host service. It throws the following error.
This application was working properly till some 2 days back and suddenly it has started giving this error. We have not updated any software. The host machine is Win XP.
Sep 27, 2011 12:08:15 PM Main main
INFO: Javahost config file(s): C:\OracleBI\web\javahost\config\config.xml. Xpath:.
Sep 27, 2011 12:08:16 PM ApplicationImpl createEnvironment
INFO: Config environment properties:
presentation.coreconfigdir=C:\OracleBI\web\config
javahostdir=C:\OracleBI\web\javahost
rootdir=C:\OracleBI
presentation.dataconfigdir=C:\OracleBIData\web\config
presentation.rootdir=C:\OracleBI\web
tempdir=C:\OracleBIData\tmp
presentation.cordaroot=C:\OracleBI\Corda50
Sep 27, 2011 12:08:16 PM ApplicationImpl init
SEVERE: java.io.IOException: Unable to establish loopback connection
     at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     at sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     at java.nio.channels.Pipe.open(Pipe.java:133)
     at sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:104)
     at sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     at com.siebel.analytics.javahost.Listener.<init>(Listener.java:53)
     at com.siebel.analytics.javahost.ApplicationImpl.init(ApplicationImpl.java:121)
     at com.siebel.analytics.javahost.standalone.Main.init(Main.java:127)
Caused by: java.net.SocketException: No buffer space available (maximum connections reached?): bind
     at sun.nio.ch.Net.bind(Native Method)
     at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:119)
     at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
     at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52)
     at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:72)
     ... 9 more
Request some input to resolve this error.
Thanks in advance.

@Deepak,
Following are the log contents
Sep 27, 2011 12:08:15 PM Main main
INFO: Javahost config file(s): C:\OracleBI\web\javahost\config\config.xml. Xpath:.
Sep 27, 2011 12:08:16 PM ApplicationImpl createEnvironment
INFO: Config environment properties:
presentation.coreconfigdir=C:\OracleBI\web\config
javahostdir=C:\OracleBI\web\javahost
rootdir=C:\OracleBI
presentation.dataconfigdir=C:\OracleBIData\web\config
presentation.rootdir=C:\OracleBI\web
tempdir=C:\OracleBIData\tmp
presentation.cordaroot=C:\OracleBI\Corda50
Sep 27, 2011 12:08:16 PM ApplicationImpl init
SEVERE: java.io.IOException: Unable to establish loopback connection
at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
at java.security.AccessController.doPrivileged(Native Method)
at sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
at sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
at java.nio.channels.Pipe.open(Pipe.java:133)
at sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:104)
at sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
at com.siebel.analytics.javahost.Listener.<init>(Listener.java:53)
at com.siebel.analytics.javahost.ApplicationImpl.init(ApplicationImpl.java:121)
at com.siebel.analytics.javahost.standalone.Main.init(Main.java:127)
Caused by: java.net.SocketException: No buffer space available (maximum connections reached?): bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:119)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52)
at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:72)
It also mentions about the buffer space....could that be a reason for this.
By the way, I forgot to mention, this deployment is in a VMWare (with XP as OS) which is hosted on Windows Server.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Can I create a form in muse and have it work with a different hosting service?

I contacted a hosting service that I need to upload the site I built in MUSE to. (Hosting has already been purchased). I asked OMNIS:
I want to create a form with Muse and then upload my site to OMNIS, not muse, the forms will display as I designed them, but they will not function. I have someone to help me who is experienced in working with code. I can use Muse to export my site and then open the files in an HTML editor. "Update the source code of the form to make it compatible with the form processing technology used by your hosting provider (OMNIS) before you upload the files to their server." Can you help me with this? Do I need to get a script or something from you?
OMNIS ASKED me:
What are MUSE's site requirements?
I will be building other sites and my clients may want to have the site hosted elsewhere. Can you give me the easiest way to deal with forms?

Thank you for getting back to me Morgan.
I read in another forum:
There's a handy piece of software from CoffeeCup Software called "Web Form Builder". It's pretty affordable and easy to use and it can be hosted on the server of your choice provided that server uses an up-to-date PHP script.
This is what I have been using....but I would rather not have to deal with a third party form builder at all.
Do you reccommend this?

Can you help me choose a Web hosting service

Just call me a procrastinator but I know I have to find a web hosting service for my iweb created websites soon. Despite browsing all afternon I can't find any definitive recommendations. (perhaps it's not allowed in discussions but I really need specifics) I want it to be as easy (a la MM) as possible and do want to continue a blog (preferably with ability to RSS/comments). I also want unlimited space, bandwith, etc and of course am willing to pay but want to do the right thing as reasonably as possible - please can someone help me...soon

I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

What is the effect of the service account permissions

Hi,
What is the effect of the service account permissions? For example, suppose the service account for SQL Server database engine is SomeDomain\A, and has no permission to execute stored procedure X, and a user with domain account SomeDomain\B does have the
said permission. Which one will prevail, i.e. can the user execute stored procedure X? If so, what permissions must I give the service account SomeDomain\A?
I am asking this in the context of planning deployment in the production environment of a data warehouse application.
Cheers,
Jerome
Jerome Smith BI Consultant, MCP

Hi Jerome,
Service account for SQL Server Database Engine only have limited permissions. To grant the account permission to execute stored procedure X, please refer to the following
query:
USE database;
GRANT EXECUTE ON OBJECT::dbo.X
TO SomeDomain\A;
GO
Since the user is in the context of planning deployment in the production environment of a data warehouse application, we may need to add some additional permissions. For more details, please refer to the following blog:
http://blogs.msdn.com/b/data_otaku/archive/2011/06/28/securing-the-data-warehouse.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Default GL account (cost element) for external service contracts

Hi everybody,
question about GL being defaulted from contract for external services
The requirement is to have GL (cost element) being defined per service sub item defaulting to work order. Account assignment is unknown, because the costs might be settled later to cost center or AFE or else.
You could default cost element either through material group (which doesn't enable cost element to contract) or with account assignment category 'K' or 'F' which do not suit, cause the former requires cost center, that is unknown yet, whereas the latter requires assignment to order which doesn't make sense at all. Theoretically, it could be done with acc assignment cat 'U' , but cost element is not enabled with that category..
I was assuming that cost center which you are required to enter along with cost element while creating service sub item referring to some sort of internal accounting. The system also requires service sub item acc assignment category being aligned with requisition (which is 'F') and would in fact create PR referrencing actual work order number. But still, doesn't it make sense having contract referencing another order.. Also, we don't use default values for PM ext operation data.
So, the question is how to accomplish the requirement with Unknown assignment category? what is the point of defining cost center in the contract in given circumstances? Is there any work around exists?
Thanks in advance
Sergey

Hi,
Try this: IMG -> Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Maintenance and Service Orders -> Functions and Settings for Order Types -> Create Default Value Profiles for External Procurement.
After that assign it to order type: Default Values for Task List Data and Profile Assignments.
Regards,
Rogério Reis

'Not running in a hosted service or the Development Fabric' exception on deployed Worker role

We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?

We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?
Hi,
I have tested this situation in Windows Azure platform and i can not reproduce your exception message, my test code in follwoing MSDN samples and i deploy it in Production status.
The MSDN article (include Appdomain code snippets)
http://msdn.microsoft.com/en-us/library/system.appdomain.aspx .
Base on my understand, the "Not running in a hosted service or the Development Fabric" error message occur when Azure Emulator or Azure development fabirc, because you create a new appdomain in WorkRole, and it may cause permission errors, a similar
posts by my research:
https://social.msdn.microsoft.com/Forums/en-US/windowsazuretroubleshooting/thread/50987285-58ac-484e-b604-725fe01a3325
If you still have some problems, please inform me. Thank you.
Please mark the replies as answers if they help or unmark if not. If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework

How to set same domain name for Azure Storage and Hosted Service

I have a web application running on azure and using azure storage with blob. My application allows to edit html files that are in the azure storage to save with another name and publish them later. I am using javascript to edit the html content that
I display in an Iframe but as the domain of my web application and the html that I try to edit are not the same, I got and this error "Unsafe JavaScript
attempt to access frame with URL "URL1" from frame with URL "URL2". Domains, protocols and ports must match".
I have been doing some research about it and the only way to make it work is to have the web application and the html that I want to access using javascript under the same domain.
So my question is: is it possible to have the same domain name in azure for the hosted service and the storage.
Like this:
hosted service: example.com
storage: example.com
By the way I already customize the domain names so they looks like this:
hosted service <mydomainname>.com
storage <blob.mydomainname>.com
Actually I have my application running in another hosting and I have no problem there since I have a folder where I am storing the files that I am editing so they are in the same domain as the application. I have been thinking in to do the same with Azure,
at least to have a folder where I can store the html file meanwhile I am editing it but I am not sure how much space I have in the hosted service to store temporary files.
let me know if you have a good tip or idea about how to solve this issue.

Hi Rodrigo,
Though both Azure Blob and Azure applications support custom domain, one domain could have only one DNS record (in this case is CNAME record) at one time. For Steve's case, he has 3 domains, blog.smarx.com, files.blog.smarx.com and cdn.blog.smarx.com.
> I would like to find a way to storage my html page that I need to edit under the same domain.
For this case, a workaround will be adding a http handler in your Azure application to serve file requests. That means we do not use the actual blob url to access blob content but send the request to a http handler then the http handler gets the content
from blob storage and returns it.
Please check
Accessing blobs in private container without Shared Access Secret key for a code sample.
Thanks.
Wengchao Zeng
Please mark the replies as answers if they help or unmark if not.
If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework

Cost effective quicktime hosting service?

Similar Messages

Maybe you are looking for