Cost Element column not appearing in IW31/ IW32 transaction

Hi,
In transaction IW32, in Operations Tab --> click on External Button (below shown on IW32 screen).
Now under External, click on Services tab (1st option), here Cost Estimate column not appearing.
We tried to add through configuration option on this window. (there shows table setting --> click on administrator, now you can see Edit system settings, here Cost Element - ESLL-KSTAR shown with TICK on Invisible checkbox).
How can i Untick that. I tried but after activate, it again appears.
Plz guide..

Hi,
Where a cost element exists on the operation External TAB, input of the same data on the service line is not allowed. In that case the system decides that this data field should not be available on the service lines. Where the is no cost element on operation then entry is allowed on service line.
This program logic is overwriting the field configuration on the table setting for service entry grid. This is why the invisable flag cannot be changed.
-Paul

Similar Messages

BPS Variable-Cost Element is not displaying Text

Dear Team,
We have a peculiar issue one of the BPS Variable defined for Cost Element is not displaying text in one of the Planning Layouts.
Another variable is displaying text in another layout.
Surprisingly...when I reused the old variable in the new layout it is also not displaying the text.
Am I missing something....appreciated your quick support.
Thanks & Best Regards
Srinivas

Have you check the layout Lead-Column setting? Is it set to 'Key/Description'?

Creation of cost element or not for GBB-VAX,GBB-INV and UMB

Dear Experts,
I have few doubt regarding creation of cost element. Whether i will create Cost element or not.
1) GBB-VAX - used in PGI(Vl02n)We have costing based COPA .whether we will create cost element or not.If i will create cost element then need to be bydefault in okb9 with PSG tick.
2) GBB-INV- Used for Material taging(MI01,MI04,MI07)whether we will create cost element or not.If i will create cost element then what will be my cost object and how i will charge from my product costing.
3) UMB- is used whenever standard price is changed. Shall i create cost element for the same
If yes hen what will be my cost object and how i will charge from my product costing.
Request you to help me on the same.
regards
RR

1) GBB-VAX - No, Goods Issue for sales order with no assignment object and hence without Cost Element
2) GBB-INV- Yes to post expenditure/income from inventory differences
3) UMB- Yes
Regards
KS

Cost element does not exist in CO

Hi SAP folks,
In new co code we have copied GL codes from co code 1000. Now while changing cost element in KA02 system gives error message like "Cost element does not exist in controlling area". Why this error message is comming, however all cost elements are automate come from co code 1000....right....how to solve this issue...please anyone do help.....
how to copy cost elements to new co code from co code 1000 and How to extend existing cost centers to new code. Ex: co code 1122 has 3 cost centers and we need to extend the same to co code 1123. Controlling area is same for both co codes.
Thanks

Hi Eli,
Really, i appreciated for your help.
But, still my question is not to be answered. I am giving entire picture what i have done earlier.
1. I have copied 2 co codes(CACA & CACB) from 1000 co code
2. I have created new chart of a/c (CACA) and assigned to co codes
3. I have co area as INT and assigned to co codes
4. I have copied gl codes to 2 co codes from 1000
5. I have created 5 cost centers newly in 1 co code area
Here my question is:
- We need to extend same cost centers to another co code
- When i am changing cost element, system gives error like no CE in co area..why? and how to resolve?
Thanks

Heading elements do not appear in design view

Hello,
heading (h1, h2 ...) elements do not appear in design view. anybody know how to fix this?
btw seems like DW gets worse with each successive version.

I really don't have any troubleshooting advice because I can't reproduce the problem and have not seen this problem being raised previously in the forums.
If you have deleted the personal config file and cache and that hasn't helped, it may be time to uninstall and reinstall.
Also double check your computer for any viruses or malware etc.,
Depending on what version you are using then, you may want to run the uninstall scripts to make sure you remove *all* files associated with the software and start from scratch.
If you are having problems with Creative Suite 3, I would suggest using the CS3Clean script: http://www.adobe.com/support/contact/cs3clean.html
There is a different version for Creative Suite 4: http://www.adobe.com/support/contact/cs4clean.html.
WARNING: The CS3Clean and CS4Clean scripts remove from your computer EVERYTHING related with the CS3 and CS4 suites, apart from any documents that you have created using Adobe programs. Make sure you have your installation disks and serial numbers available for reinstallation.
If all else fails, then you may need to contact Adobe Technical Support.

Activity Type: cost element does not exist

Dear All,
I am working on ERP configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
Can anybody guide me on how to go further?
regards,
Supriya

Dear
Please revivew the following steps when you are creating a New Acvity type :
OP51 - Check Settings for formulas
OP54 - Check formulas for Costing
Ensure that usage of the parameters are indicated. Some parameters are appropriate for capacity calculation but not for schedule calculation. If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
KLH2 - Maintain hierarchy of Activity type group.
OP19 - Define standard value key
The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing. This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with. Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing. The pre-requisite for using this transaction is that the parameters must have been pre-created.
KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01 - Create Activity Type tied to the primary cost element. (the Cost element field)
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
The operations Start and Finish date will be extended due to the extra time spent on the work center. The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order. The new activity will have a price attached to it and the moving average price will increase.
Regards
JH

Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down

Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
Krishna

Hi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic

Cogs-is it cost element or not

hi
COGS should be taken as cost element or not, it takes- what is the costobject and shall i send to copa or not
sowmya
Moderator: Please, search SDN

Hi,
Make COGS as CE in MTO scenario only (GBB-VAY) for bringing to COPA.
If it GBB-VAX do not create it as CE
regards,
neeraja

SECESS gl not appearing in J1IH OTHR transaction

Hi Friends
I am trying to post the exicse invoice thru J1IH using "Other Adj." Transaction. In that after giving the values for Excise duties , when I click the tab "Determin Gl Accounts" I get the simulated accounting entry in which I dont get the gl account of "Secondary education cess". However the Total of BEDCESSSECC is correctly getting credited to "Excise Duty paid" But since SEcess gl is not there , the entry is unbalanced and system does not allow to post the trnsaction.
. I checked the Account determination for Excis. In "Specify Excise Accounts per Excise Transaction" i have the entry
OTHR Credit RG 23 AT1 Account
Also in "Specify G/L Accounts per Excise Transaction" I have the gl account assigned to relevant excise group for ETT "OTHER" for Rg23A- AT1
Can anybody please tell me why the Secess GL is not appearing in J1IH (OTHR) transaction ???
Thanks and best regards
Vijay

Hi Vikas
Thanks a lot ! Problem resolved !!
Although GL was assined ,The entry for MRDY RG23A CREDIT was missing in "Specify Excise Accounts per Excise Transaction" . After I added the entry , the SEcess field is comming correctly now
Thanks for your timely help vikas
best regards
Vijay

"Edit in Photoshop Elements" does not appear as option in Lightroom 4.3

After viewing this artical:
http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html and completing all options related to the Mac, the "Edit in Photoshop..." still does not appear as a clckable option in my Lightroom 4.3 program which has all the current updates. Also, my Photoshop Elements 11 program also has all the current updates.
Please note that in the interest of time, that all of the "solutions" were attempted in the above mentioned link
Also, was on hold with Adobe Lightroom help phone support for over 1.5 hours without any agent answeing the phone. Also Adobe automatied phone support states that Photoshop Elements is not supported free of charge and it is fee based. How is a consumer suppose to have a problem corrected in Lightroom that stems from Elements when it is suppose to intergrate that way between the two programs but any help to try to correct the way it is suppose to work will cost you an addition fee in phone support for Elements?
And help on fixing this issue will be apprecitated.
Lightroom v 4.3 / Camera RAW v 7.3
Elements v 11.0 / Camera RAW v 7.3.0.71

Did this with Adobe support in LIVE CHAT, what a waist of time. Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
After the configure as suggested above, does this preclude and editing in Lighroom?
What I want to do is:
Edit the photo in LR except for:
the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR. Any problems or suggestions for this?
Thanks so much

Error~ PR G/l Account & cost center is not appearing in PO while copying

Dear All,
I am converting PR into PO, while creating PR I have assigned account assignment cat as "K"(cost center ), so i assigned Cost center and G/L account , After this I tried to convert this into PO, but in PO again it is asking for G/L account & cost center onemore time,Earlier it wasn't .
May be some where the setting got changed but I am unable to find where exactly this setting got changed.
Please anyone could help in this.
Regards,
Nagaraj S

well thats really wiered
can u do one thing in your quality system create one PO and pleas but make sure the data in the po sholud be same as that of PR but this PO will be created without the reference of PR
i want to check if system is able to find the G/L account automatically which ideally it should find
in case the g/l is not picked automatically then in that case check the valuation class in material master and the g/l which is maintained in gbb or not and make sure the g/l is a cost element
if the g/l comes automatically then check the PO document type settings in the those 2 folder at the left poriton of screen in IMG>>olme>>POdefine document type

Cost element is not assigned to cost component structure

Dear Team,
While doing the settlemnt through KO88 system is showing the message like below
Cost element 433001 is not assigned to a cost component in CostCompStruct Z1
     Message no. MLCCS 010
Diagnosis
     You have activated the actual cost component split.
     No cost component has been assigned to cost element 433001 origin group
     in cost component structure Z1 for chart of accounts XXX. The system is
     unable to assign the value to a cost component.
System Response
     You cannot carry out posting.
Procedure
     Check whether for this operation the value to be posted is to be
     assigned to this cost element.
User has done tchnically completed from CO side .But system is showing the open status in FI.
So we have suggested to the user to do settlemt through KO88 system is showing the above message .Half of the production orders we can able to close through Ko88. Some of the PO we are facing the above issue.The concern GL account showing by the system is maintained as a sundry receivables a/c.
Please advice how to proceed further.
Thanks for the consideration.
Regards,
Suma

Dear Sir,
System is showing the GL account is not relating the cost element a/c ,The concern account belongs to Sundry receivables account.
The configuration is done correctly with all expenses GL a/c in OKTZ as well WIP accounts assigned corrctly in OKG8.                How the system is showing this account which i am not understanding.
Please advice to resolve.
Thanks for the consideration.
Regards,
Suma

Depreciation GL is Cost element or Not?

HI,
In Asset accounting,will we create Depreciation GL account as Cost element or normal?If we create as cost element what are the additional configuration needed.
Kindly clarify me
Thanks
Sunitha

Hi,
you only need a cost element if you want to post the depreciation also to the Controlling application CO. Then you need it to include cost centers or internal orders into the depreciation documents. If you don´t need depreciation in CO, you do not need to create these cost elements.
Regards,
Markus

Column not appearing in Answers

Experts,
I have a strange problem.
I am adding a new column in presentation layer in the online rpd.
When I am reloading the server metadata from Answers, the column is not appearing.
Any reasons?
parag

Hi,
I think if the column is not appeared in the answers for a particular Subject area, then it could be because of the permissions on the column.
Go to presentation layer, double click on the column and checkout the object and then click on the permissions TAB and see if the permission is having (X) mark in the checkbox.. If so change it to (tick mark) which indicates it is visible for the users for reporting ..
Then reload the server metadata and try to see if the column appears..
Regadrs,
Naveen.

Cost element is not assigned to a cost component

Dear All,
On trying to run costing for finished good having one BOM component, system create error in costing log as-
Message no-239-Cost element 954001 is not assigned to a cost component 1
On seeing details:
Cost element 954001 is not assigned to a cost component
Message no. CK239
Diagnosis
The system attempted to generate the cost component split for the material, but discovered that no assignment has been made in cost component structure Z2 for cost element 954001 and possibly for origin group .
System Response
The cost component split is incomplete. The cost of goods manufactured in the cost component split is therefore less than in the itemization.
ProcedureGo into Customizing for Product Cost Controlling and carry out the assignment for cost component structure Z2 and chart of accounts AICA.
where i am missing the required setting.
please guide
regards

Hi,
Use T.Code OKTZ for the relative cost element has to be assigned to one of the components there in
the cost component structure. Choose the nature of assignment for eg. raw material, choose the source and give the cost element. Then choose Assignment and give settlement through Cost center, Order.While coming back activate the cost component structure and save. Try for the Costing.
Regards,
Sadashivan

Cost Element column not appearing in IW31/ IW32 transaction

Similar Messages

Maybe you are looking for